Backup Cloning From 512 Byte/sector HDD To 4KB/sector HDD
Dec 18, 2011
I'm trying to educate myself on cloning i.e. bootable sector-by-sector replication, not just creating an image file of the used disk space. So far, I've bought a high performance HDD of the wrong size, trying to make sure that I replace it with an HDD with which my first cloning attempt will go without a hitch.
My laptop contains a 640GB Toshiba MK6465GSX HDD (Toshiba SDD - Product Detail). I am considering getting 640GB WD Scorpio Blue HDD for the cloning.
One of the constraints I want to observe is that I should be able to pick it up in person from one of the retailers in my city. However, they invariably carry the WD6400BPVT variant, which uses 4KB sectors ("Advance Format"). Nothing comes up in a search for "MKxx65GSX MKxx76GSX advanced-format" (without quotes), so I assume it has 512 byte sectors.
Is there a problem with cloning from a 512 bytes/sector HDD to an 4KB/sector HDD?
View 8 Replies
ADVERTISEMENT
May 29, 2011
I have a 500 gb weston digital portable hdd. I use a casing to use it in my pc. I recently checked that there are many bad sectors in my hdd. Is it possible to remove that bad sectors by self. Or as it's in warranty, send it to the company and they'll take care of.
View 2 Replies
View Related
Jun 22, 2009
I have installed Windows 7 from my hard drive (E:). Now I have a small problem, the boot sector (or something like that) is located in E:, I want to move it to C:. Moreover there is two options in the bootscreen: Windows 7 and install Windows 7 RC. How I will remove the secon option?
View 4 Replies
View Related
Oct 4, 2012
HDD: ST30005 28AS. Failing. I have to recover some data and throw it away. With Seatools dos cd, I accidentally the first sector. I also set it at that time at 33 gb. Now I can't see any partitions in it. I tried everything in HIREN's boot cd. The drive was failing, 15 minutes at windows loading, SMART messages to backup it, etc. I low level formatted it when it was 33 GB. My data is a few GB beyond anyway. However I played with it I can't read anything from it. Help.OK, so the drive is my third, a storage drive. I disconnected the other drives, inserted the Windows 7 recovery disk, but it didn't do anything. I couldn't find the ol' cmd menu I knew from other times. (Info or help -> a series of commands, including fixmbr.) It found the drive, but couldn't say anything about it. So no access, no identity, no status of it, nothing. Windows keeps telling me to replace the drive, but sees no volume informations. How the hell can a drive become invisible at any kind of content mode? I just used the menu from seatools and it vanished. How can it offer a delete for first sector but no fresh write of it?
View 1 Replies
View Related
Jan 4, 2012
how it get bad sector on my hard drive?
View 2 Replies
View Related
Dec 27, 2012
Running home premium on HP desktop.I installed an SSD and installed W7 on it. Unfortunately I didn't have the foresight to remove the old HDD first, and the W7 install kept the boot sector on the old HDD. Now of course when I remove the old HDD the system won't boot. I tried doing a repair with the W7 install disc. It does say it's repairing, but after many restarts there is still no boot sector on the SSD.So now I re-installed the old drive, but I eventually want to remove it. One additional thing that might help the diagnosis: On bootup I am presented with two W7 boot options. If I select the second W7 it comes back with "Windows failed to start" and then goes on to instruct me to reboot with the W7 disk and select "repair". But as I stated, I already tried that and it didn't work.I spent many hours setting up my W7 environment on the new drive, and I'd really like to fix this problem without doing a fresh re-install of W7.
View 3 Replies
View Related
Nov 24, 2012
Have an issue with unmountable boot in windows 7. Do not have a repair disk or original disks since son purchase it from a friendI used an XP disk to get in cmd and did a chkdsk /r fixing bad sectors. Can i use the fixboot or bootrec.exe commands to fix the windows 7 boot issue?
View 2 Replies
View Related
Oct 9, 2012
I was working on my computer when windows locked up and I was forced into a hard shut down, when I restarted the computer one of my hard drives showed up as invalid and my computer would not recognize it. When I tried to repair the sector to make it valid the it seemed to work, now my computer will not boot into windows at all. I have an SSD HDD set up and I need this computer as it is my main audio work station.
View 3 Replies
View Related
Mar 3, 2012
Have a netbook with Windows 7 Starter. It dualboots with Linux. My plan is to remove the Linux partition to make space on the hard disk. Obviously then the boot information, which is a GRUB, should be corrected. How can you edit this ahead of time, to allow a boot with a single entry? A netbook has no disk drive, so there is no repair disk available.
View 6 Replies
View Related
Nov 28, 2011
Yesterday, I was browsing on my computer and heard a weird clicking noise when the CD drive was running. About a few minutes after that, Firefox froze so I did a hard reboot, and up comes this message:
"No boot sector on internal hard drive No bootable devices--strike F1 to retry boot, F2 for setup utility Press F5 to run onboard diagnostics."
I have no idea what it means, and I've been everywhere trying to do System Restore using the Windows 7 reinstallation disk, but unfortunately I couldn't create a restore point because my jump drive doesn't have enough space and Startup Repair couldn't solve my problem. I've even tried the bootrec.exe on Command Prompt but I had no idea what to do. This is the first time that this has happened to me. My laptop is a Dell Inspiron 1545 and I have Windows 7 Home Premium 64-bit.
I'm on a tight limb about this problem right now because my warranty expired in early June this year, and I don't have the money for them to look at it, let alone buy a brand-new hard drive.
View 7 Replies
View Related
Jan 15, 2013
My wife shout down her computer this morning took it on remote location for work today but never booted it up. When she got back home tonight it wouldn't boot up. I don't know what to call these screen but some Startup Repair screen. Just says Repair action: Boot sector repair, Result: Failed.I downloaded and burned to CD the boot CD for the MiniTool Partition Wizard Home Edition but I don't know what disk I am even looking for. I see 3 partitions listed for one disk.The only one with a label is BDEDrive and it's 300 MB. The other two have *: as what I would call a label. One is 297.79 GB and the other is 12.34 MB. The BDEDrive is the only with with status of Active. NTFS on that partition and Other on the big partition.
View 7 Replies
View Related
Feb 6, 2013
So I finally got around to checking one of my set ups and I discovered that it does not have the Windows 7 100MB section on the SSD. I double checked with Macrium and sure enough, there is no 100MB section on the SSD.
Is there a way to install it without having to reload the entire O/S again?
View 9 Replies
View Related
Oct 7, 2011
I have a Dell Inspiron that is running Win7 Home premium 64 bit and I am getting an error message while booting up it states "No boot sector on internal hard drive. No bootable devices--strike F1 to retry boot". When I strike F1 it boots just fine.
View 9 Replies
View Related
Oct 17, 2012
I bought this computer three months ago, and had no problems, up until now. It all started with it freezing up all of a sudden, forcing me to restart. But the display didn't show up. Tried again. Didn't work. Eventually, I removed my GPU and placed it back again, thinking it was loose. Then it finally worked.
Then it happened again. So after taking out my graphics card twice, it finally started working, but my HDD started making strange sounds. A sound I've never heard before, and only occurred during start up. I shrugged it off.
Now I start getting these sort of instances, when what ever program I have open, stops responding and Windows get's pretty laggy. The Windows Explorer (Not IE, the tool bar thing) also is unresponsive. I know it can't be a virus, Trend Micro showed no signs of anything after I scanned my computer a bunch of times.
So I did what any sane person would do, I did a bit of research on the net, and found this thread on this forums. The person here had a similar problem that I did. After reading most of the comments, I downloaded HDD SMART, as instructed, and apparently "Current Pending Sector Count" is yellow.
View 3 Replies
View Related
Jun 11, 2011
I`ve got a serious problem with my vaio. i was surfing the net that i faced a BAD SECTOR ERROR on system 32. As I closed the ERROR,the system restarted. When I select the windows 7 to boot, the windows logo page come and restart again and again.Even when i decided to install a new version or repair it,the installation found no drive to install on.\
View 1 Replies
View Related
Jun 3, 2011
It's a dell latitude, 1 year old. Laptop suddenly crashed and when the laptop booted it said: "no boot sector on internal hard drive". I tried repairing the boot sector with the windows repair function, but the hard drive is just empty... nothing to repair. Then I tried to boot off a ubuntu live cd. which worked. and showed me an empty hard drive with the_maximum_capacity_of_the_drive_GB of unallocated space.
Since that I reinstalled windows 7 two times, and stopped working after an hour or so. I installed ubuntu, which worked for several days. then i tried windows 7 again (clean install). And then I kept working on the laptop for a couple of hours until the "crash" happened. All the programs stopped working suddenly. When I opened anything I was shown this error: "Illegal operation attempted on a registry key that has been marked for deletion."
After that everything is lost if I turn the computer off. And I'm back at an empty unformatted hard drive. I changed the sata operation mode in the bios to different options before every installation of windows. I didn't try xp, because I don't have dell-xp cd's . Is the hard drive broken? I guess not because ubuntu works. and windows 7 also, but it just goes away suddenly... Here's a video (shot in portraitmode) of the event... [URL].
View 8 Replies
View Related
Mar 3, 2012
When I clean installed Windows 7 it would create 3 partitions
0 byte = unallocated
100MB - reserved
and 80GB (the rest) = install
Somehow, I eventually got rid of that 0 byte partition during one of my reinstalls.I thought I knew how I did it, but apparently not.I am trying to install W8 on a spare drive that I probably tried unsuccessfully to image my Windows 7 system to when it still had the 0 byte partition.
View 2 Replies
View Related
Jun 6, 2010
have looked many different forums and different solutions but nothing is working to delete this file from my desktop.I let my sister borrow my laptop while I was away, and she had downloaded these torrent's to my system. Leaving the torrent files on my desktop. I was able to delete them all apart from one.I can't budge it. I've used FileAssassin, LockHunter etc and I've also used CMD prompts.CMD prompt comes back with the answer that the file cannot be found, when it is starting right at me on the desktop. I can't move it to another folder, or rename it. FileAssissin can't find it and LockHunter can't find it. Unlocker didn't work either.
View 9 Replies
View Related
Nov 3, 2012
Ultimate family tree compatibility upgrade to 64 bite systemhow dies it work?
View 1 Replies
View Related
Sep 11, 2011
I am running W7/64 in a Dell Inspiron. I discovered that Windows Backup did not give me back my folders when I needed them and I don't want to use it again. In all previous OSs I have used Apricorn/Acronis which backed up from BIOS and produced an external HD copy which would boot automatically and restore the complete disk, or one could select folders and files to move back. Simple and elegant.
i searched for "clone" information in "Windows 7" and got information mostly for other XP, Vista, etc. But I did see that the free XXCLONE was mentioned and I would like to hear from anyone who has used XXClone in Windows 7 to report on its value, problems, etc.
View 9 Replies
View Related
Jun 26, 2010
I migrated from a 250 GB HDD to a 500 GB. I had around 230 GB of information wich I really didn't want to loose, so I cloned the old HDD to the new one with the software Acronis True Image Home.
Apparently, the cloning succeds, but when I disconnect the old Disk and try to boot from the new one, when I log on I get stuck in "preparing your session".
View 9 Replies
View Related
Aug 12, 2010
I'm transfering all my data to a new hdd using gparted. My ubuntu partition went fine but my windows 7 is corrupted or broken. I tried twice to clone the partition but the new one is behaving oddly. url...first when windows starts theres nothing on the screen, i have to ctrl+alt+del and create a explorer.exe process, then I can't navigate because any attempt to enter "computer" or any explorer windows returns a warning with "no such interface supported". All my data is still there but is currently unusable.I really want to clone it because reinstalling everything is going to be too much time consuming.
View 9 Replies
View Related
Dec 1, 2009
I have a 22 inch monitor on my desktop. I also have a 46 inch Samsung LCD HD TV. I want to clone my display so what is seen on the monitor, can also been seen on the TV across the room.
Extended desktop works but I need to be able to CLONE it. I can't for the life of me figure out how to do this on Windows 7. Any help would be great.
Video card in question is an ATI 3870 X2 with 3 DVI outputs and one HDMI output.
View 2 Replies
View Related
Jan 25, 2012
I installed a 2nd hard drive (presently drive B: ) it is initialized, volume prepared and ready to go. The plan is to clone Drive C: to it. Then making it the primarily C: drive. The old C: Drive will then be changed to Drive B.
View 4 Replies
View Related
Sep 25, 2011
I bought a intel 320 160g gen3. Looking to clone my raid o to it. I may be over simplifying it but can't I just install the SSd in the 3rd Sata spot clone to it from the raid then just change the bios to boot off of the SSd and change it to ahci? Then keep the raid o as is for storage of games and such. I am not putting any important data on the raid o purely a gaming computer. Fresh instal isn't an option btw.
View 3 Replies
View Related
Jul 27, 2012
I originally did a fresh install of Windows 7 onto an SSD, which has now become too small. Using the Windows 7 utility today I created a system image onto an external standard hard drive. I'd like to restore the image onto my new, larger SSD. Is preparation such as alignment needed, or does going from one SSD to another take care of that? I'm assuming I can resize the active partition using Disk Management afterwards.
View 5 Replies
View Related
Jan 31, 2012
SImple question does anybody no of the best free HDD cloning software for Windows 7 ?
View 3 Replies
View Related
Jun 19, 2012
I've cloned my 320GB HDD to a 128GB SSD. Before you think I lost my mind let me state, I've used "less" than 25% of that 320GB HDD.
Now, my problem is this. When I boot up the cloned SSD in my new] laptop it will not bootup and says, it does not detect a bootble disk. I've tried the repair/restore three times with no success. Does anyone know for certain what I might do to repair this issue and get it to bootup correctly?
View 3 Replies
View Related
Sep 19, 2011
I have used a linux live cd to create an exact image copy of a 320gb hdd on an external HDD by doing:
root@ubuntu:/media/backup# dd if=/dev/sda of=2011-09-19.img bs=32256
9922896+0 records in
9922896+0 records out
320072933376 bytes (320 GB) copied, 8851.48 s, 36.2 MB/s
Windows 7 ultimate is installed on that HDD. I just want this image so if the hdd fails i can buy a new hdd and restore the image to the new hdd.However is there some disk signature problem if i do this? Because the new hdd would have a different disk signature from the one of the old hdd. I have read that this can cause an error message during boot along the lines of 'The boot selection failed because a required device is inaccessible.'. Do i have to manually edit the MBR using a hex editor to match the new hdd? How do i even find the correct signature of the new hdd?
View 1 Replies
View Related
Jul 22, 2012
I am trying to use Seagate discwizard, to clone my hard drive to another. When I went through the process, the new HDD received only the C partition and not the D.
I really don't want to format the hdd and reinstall!
View 2 Replies
View Related
Aug 17, 2009
Can anyone tell me is there any Hard Disk Cloning program similar to the Seagate Disk Wizard or Norton's Ghost that is compatible with Windows 7I tried using the Seagate Disk Wizard which I'd been using succesfully under WIN XP PRO and it creamed my backup HD and I had to reformat itPerhaps there is a Windows 7 version of SDW available or coming soon
View 9 Replies
View Related
