How To Get Bad Sector On Hard Drive

Jan 4, 2012

how it get bad sector on my hard drive?

No Boot Sector On Internal Hard Drive Error

Nov 28, 2011

Yesterday, I was browsing on my computer and heard a weird clicking noise when the CD drive was running. About a few minutes after that, Firefox froze so I did a hard reboot, and up comes this message:

"No boot sector on internal hard drive No bootable devices--strike F1 to retry boot, F2 for setup utility Press F5 to run onboard diagnostics."

I have no idea what it means, and I've been everywhere trying to do System Restore using the Windows 7 reinstallation disk, but unfortunately I couldn't create a restore point because my jump drive doesn't have enough space and Startup Repair couldn't solve my problem. I've even tried the bootrec.exe on Command Prompt but I had no idea what to do. This is the first time that this has happened to me. My laptop is a Dell Inspiron 1545 and I have Windows 7 Home Premium 64-bit.

I'm on a tight limb about this problem right now because my warranty expired in early June this year, and I don't have the money for them to look at it, let alone buy a brand-new hard drive.

View 7 Replies View Related

No Boot Sector On Internal Hard Drive - Strike F1 To Retry

Oct 7, 2011

I have a Dell Inspiron that is running Win7 Home premium 64 bit and I am getting an error message while booting up it states "No boot sector on internal hard drive. No bootable devices--strike F1 to retry boot". When I strike F1 it boots just fine.

View 9 Replies View Related

Bad Sector On System 32 / Restarted Doesn't Recognize Hard Drive

Jun 11, 2011

I`ve got a serious problem with my vaio. i was surfing the net that i faced a BAD SECTOR ERROR on system 32. As I closed the ERROR,the system restarted. When I select the windows 7 to boot, the windows logo page come and restart again and again.Even when i decided to install a new version or repair it,the installation found no drive to install on.\

View 1 Replies View Related

Laptop Suddenly Crashed - No Boot Sector On Internal Hard Drive

Jun 3, 2011

It's a dell latitude, 1 year old. Laptop suddenly crashed and when the laptop booted it said: "no boot sector on internal hard drive". I tried repairing the boot sector with the windows repair function, but the hard drive is just empty... nothing to repair. Then I tried to boot off a ubuntu live cd. which worked. and showed me an empty hard drive with the_maximum_capacity_of_the_drive_GB of unallocated space.

Since that I reinstalled windows 7 two times, and stopped working after an hour or so. I installed ubuntu, which worked for several days. then i tried windows 7 again (clean install). And then I kept working on the laptop for a couple of hours until the "crash" happened. All the programs stopped working suddenly. When I opened anything I was shown this error: "Illegal operation attempted on a registry key that has been marked for deletion."

After that everything is lost if I turn the computer off. And I'm back at an empty unformatted hard drive. I changed the sata operation mode in the bios to different options before every installation of windows. I didn't try xp, because I don't have dell-xp cd's . Is the hard drive broken? I guess not because ubuntu works. and windows 7 also, but it just goes away suddenly... Here's a video (shot in portraitmode) of the event... [URL].

View 8 Replies View Related

Backup Cloning From 512 Byte/sector HDD To 4KB/sector HDD

Dec 18, 2011

I'm trying to educate myself on cloning i.e. bootable sector-by-sector replication, not just creating an image file of the used disk space. So far, I've bought a high performance HDD of the wrong size, trying to make sure that I replace it with an HDD with which my first cloning attempt will go without a hitch.

My laptop contains a 640GB Toshiba MK6465GSX HDD (Toshiba SDD - Product Detail). I am considering getting 640GB WD Scorpio Blue HDD for the cloning.

One of the constraints I want to observe is that I should be able to pick it up in person from one of the retailers in my city. However, they invariably carry the WD6400BPVT variant, which uses 4KB sectors ("Advance Format"). Nothing comes up in a search for "MKxx65GSX MKxx76GSX advanced-format" (without quotes), so I assume it has 512 byte sectors.

Is there a problem with cloning from a 512 bytes/sector HDD to an 4KB/sector HDD?

View 8 Replies View Related

Clone Hard Drive To 64gb Flash Drive And Restore To Another Hard Drive?

Nov 14, 2012

I have a hard drive I want to backup to a 64gb flash drive and then restore it to another different hard drive than where it came from. I have windows 7 and office on my laptop and I want it on my desktop pc. There isn't close to 64gb of info on my laptop so it should be fine even though the hard drive says I have 160gb. It is all free space except for those programs.

View 3 Replies View Related

Upgrading Hard Drive On A Solid State/Hard Drive System?

Oct 25, 2011

So, I have a i7 2600K system with a solid state disk as the boot drive, and an older (c2008) Samsung Spinpoint F3 500GB drive as the data drive for programs (that I deem as not worthy of the quick load times). The hard drive has given me some errors over time, and I bought a hard disk to replace it (a Hitachi 1TB).�The issue I'm having is that the fact that Windows 7 puts a small (100MB) partition on the F3, and for some reason, even though I'm running Acronis 2012, it doesn't seem to be able to clone the F3 over to the Hitachi. I've also tried Drive XML, and for my 2 hour wait, I only managed to acquire a boot error. Thankfully, I've not done anything rash to destroy the data on the F3, but given the fact that I've seen corrupted files in Steam from that drive, I'm not will to trust it long term with my data. I really need to get the data onto that Hitachi, though...�Anyone have any advice for upgrading the HDD in a SSD/HDD system? I don't really feel like it should be so hard, especially if I've bought Acronis True Image, but maybe they haven't designed their product to handle this scenario quite yet?�

View 9 Replies View Related

Computer Is Not Booting Hard Drive/Unresponsive Hard Drive?

Jun 16, 2011

I have a HP Touchsmart IQ500. Turning my computer PC on today, all I got was a blue HP invent screen with setup, boot menu, system recovery, and system diagnosis, and I could not get past it. I entered the BIOS and figured out that the hard drive was listed as "not installed." Pretty sure that is the main problem.I tried a system restore (with the Windows 7 install disc), but I guess the computer couldn't read the hard drive enough to enter safe mode (I tried restarting and F8ing several times). I put in an external hard drive, and the BIOS read it; however, windows does not allow you to partition an OS on a hard drive.

View 2 Replies View Related

Make Internal Hard Drive Into And External Hard Drive?

Mar 30, 2012

I have an internal hard disk not in use ,and I would like to make it as external disk !I looked on the net and I found I should have the " encelsure " butt I think I wont find it here in my city .So is there another way ? like usb -esata cable

View 3 Replies View Related

Internal Hard Drive Acting Like An External Hard Drive?

Mar 4, 2010

Me and my brother built me a new computer from scratch (he did the building - i did the watching). I purchased an internal hard drive from Overclockers UK. It's a Samsung 1TB drive. I also have a 64 Solid-state drive in there as my primary hard drive that Windows was installed on and a couple of programs are installed on. My storage disk (the 1TB disk) is for all my music/films etc. Whenever I drag and drop a file into the Samsung hard-drive - it copies it rather than moves it instantly.When I had a laptop, I had 3 external hard drives and this is the way it copied files onto them.how I can get the internal drive to stop acting like an external drive?

View 6 Replies View Related

Transfer Files From Bad Sata Hard Drive To New Hard Drive?

Dec 24, 2011

I have a virus infected sata hard drive with windows 7 on it. It has the win 7 anti virus 2012 on it, and it's a cybercriminal virus. I have lots of files I want to transfer to the new sata drive. I already have windows 7 installed on the new drive. How do I get the files from the bad drive to the new one?

View 4 Replies View Related

Software To Transfer Files From One Hard Drive To Another Hard Drive?

Jan 21, 2013

I have a USB Webcam 6.1.7601.17514 from Microsoft installed on a Fujitsu Laptop (Windows 7 ) and I want to copy and install it on another Fujitsu laptop (Windows 7).The other laptop the camera is not working and there is no webcam driver installed.

View 1 Replies View Related

Remove Bad Sector From HDD?

May 29, 2011

I have a 500 gb weston digital portable hdd. I use a casing to use it in my pc. I recently checked that there are many bad sectors in my hdd. Is it possible to remove that bad sectors by self. Or as it's in warranty, send it to the company and they'll take care of.

View 2 Replies View Related

Boot Sector

Jun 22, 2009

I have installed Windows 7 from my hard drive (E:). Now I have a small problem, the boot sector (or something like that) is located in E:, I want to move it to C:. Moreover there is two options in the bootscreen: Windows 7 and install Windows 7 RC. How I will remove the secon option?

View 4 Replies View Related

Recover A HDD After Erasing The First Sector?

Oct 4, 2012

HDD: ST30005 28AS. Failing. I have to recover some data and throw it away. With Seatools dos cd, I accidentally the first sector. I also set it at that time at 33 gb. Now I can't see any partitions in it. I tried everything in HIREN's boot cd. The drive was failing, 15 minutes at windows loading, SMART messages to backup it, etc. I low level formatted it when it was 33 GB. My data is a few GB beyond anyway. However I played with it I can't read anything from it. Help.OK, so the drive is my third, a storage drive. I disconnected the other drives, inserted the Windows 7 recovery disk, but it didn't do anything. I couldn't find the ol' cmd menu I knew from other times. (Info or help -> a series of commands, including fixmbr.) It found the drive, but couldn't say anything about it. So no access, no identity, no status of it, nothing. Windows keeps telling me to replace the drive, but sees no volume informations. How the hell can a drive become invisible at any kind of content mode? I just used the menu from seatools and it vanished. How can it offer a delete for first sector but no fresh write of it?

View 1 Replies View Related

Establish Boot Sector On New SSD

Dec 27, 2012

Running home premium on HP desktop.I installed an SSD and installed W7 on it. Unfortunately I didn't have the foresight to remove the old HDD first, and the W7 install kept the boot sector on the old HDD. Now of course when I remove the old HDD the system won't boot. I tried doing a repair with the W7 install disc. It does say it's repairing, but after many restarts there is still no boot sector on the SSD.So now I re-installed the old drive, but I eventually want to remove it. One additional thing that might help the diagnosis: On bootup I am presented with two W7 boot options. If I select the second W7 it comes back with "Windows failed to start" and then goes on to instruct me to reboot with the W7 disk and select "repair". But as I stated, I already tried that and it didn't work.I spent many hours setting up my W7 environment on the new drive, and I'd really like to fix this problem without doing a fresh re-install of W7.

View 3 Replies View Related

Install Vista On One Hard Drive, Win 7 On Hard Drive 2

Nov 16, 2009

I have Vista installed on my Hard Drive, 250 GB.

But i recently purchased a 2nd Hard Drive, 500 GB, and i want to install Windows 7 on it.

Is that possible, to have both separately?

View 3 Replies View Related

Fixing Boot Sector Windows 7?

Nov 24, 2012

Have an issue with unmountable boot in windows 7. Do not have a repair disk or original disks since son purchase it from a friendI used an XP disk to get in cmd and did a chkdsk /r fixing bad sectors. Can i use the fixboot or bootrec.exe commands to fix the windows 7 boot issue?

View 2 Replies View Related

SSD Sector Repair, Windows 7 Will No Longer Boot

Oct 9, 2012

I was working on my computer when windows locked up and I was forced into a hard shut down, when I restarted the computer one of my hard drives showed up as invalid and my computer would not recognize it. When I tried to repair the sector to make it valid the it seemed to work, now my computer will not boot into windows at all. I have an SSD HDD set up and I need this computer as it is my main audio work station.

View 3 Replies View Related

How To Correct Boot Sector Without Repair Disk

Mar 3, 2012

Have a netbook with Windows 7 Starter. It dualboots with Linux. My plan is to remove the Linux partition to make space on the hard disk. Obviously then the boot information, which is a GRUB, should be corrected. How can you edit this ahead of time, to allow a boot with a single entry? A netbook has no disk drive, so there is no repair disk available.

View 6 Replies View Related

Hard-drives Apparently Corrupted After Attempted To Install A Second Hard Drive?

Oct 8, 2011

make a dualboot comp by adding windows XP to a new partition. I created the new partition with 20gb. (From the 500 of my actual harddrive)But before I actually installed on that, I got distracted with a second harddrive that my dad got(for no reason). It had a full copy of Windows XP backed up on it from another computer, so I figured I would just use that for the dualboot. I plugged it in (wired the same way as my old harddrive, but different data slot), restarted, checked the harddrive in explorer - all the data was there / reading correctly / etc, and I used 'easyBCD' to add the new harddrive to the boot list.(Which, of course, crashes if I try to start it. I just wanted to see what it would do). For a reason I can't remember, I unplugged the second harddrive for a bit, started the computer on accident (I don't know if anything loaded before I shut it off), and then when I plugged it back in.Windows 7 would not launch. It goes to a DOS-like window, except it's just a flashing _ and it never does anything even after a few minutes. XP didn't work still.. so I decided to reinstall XP (as I couldn't tell which harddrive was which on the list, I unplugged the main harddrive while installing onto the new).. and when I did this.. it formatted and installed fully... then restarted.. then restarted.. and restarted.. and just kept restarting, never showing any thing past the manufacturer logo/BIOS load-button-message-thing. So, I then try to use my 3-disk Windows7Recovery disk(burned myself with a program apparently included by the manufacturer.) It installed fully, appearing to work.. but when I launched it, it said "Invalid Partition Table" and wouldn't boot past that. When I insert my driver installer disk, it gives me a basic DOS window thing. dir A: shows the files in the disk. dir B: for some reason shows the same. C: says "Error reading from drive C: DOS area: general failure". All other letter:'s just say "invalid drive". (I'm doing this with both harddrives in.) I attempted connecting the harddrives to an old computer, but it gave an error for both. (It detected the harddrives, but said it had an error reading from it. Windows Explorer asked me to format it... {i'm willing to format one of the drives if anybody thinks it will help, but the old harddrive has data I'd prefer not to lose.} ) Looking on google, I saw several problems that all have similar problems (less overdescripptive than I am though) but none of the fixes suggested worked for me. Also - as I have two different with different errors, I only need to make one of them work.)Also - my other available computer has a CD burner / floppy drive if either are required. I also have several USB's. The computer can boot from USB's and CD's (tested), and I could easily take the floppy thingy and connect it to the computer.also - this computer is probably still under warranty unless unscrewing the hard drive voids it. .. does that count as modification of the computer?

View 5 Replies View Related

Boot Sector For System Disk Partition Is Corrupt?

Jan 15, 2013

My wife shout down her computer this morning took it on remote location for work today but never booted it up. When she got back home tonight it wouldn't boot up. I don't know what to call these screen but some Startup Repair screen. Just says Repair action: Boot sector repair, Result: Failed.I downloaded and burned to CD the boot CD for the MiniTool Partition Wizard Home Edition but I don't know what disk I am even looking for. I see 3 partitions listed for one disk.The only one with a label is BDEDrive and it's 300 MB. The other two have *: as what I would call a label. One is 297.79 GB and the other is 12.34 MB. The BDEDrive is the only with with status of Active. NTFS on that partition and Other on the big partition.

View 7 Replies View Related

Windows 7 100MB Sector - Install It Without Having To Reload Entire O/S Again?

Feb 6, 2013

So I finally got around to checking one of my set ups and I discovered that it does not have the Windows 7 100MB section on the SSD. I double checked with Macrium and sure enough, there is no 100MB section on the SSD.

Is there a way to install it without having to reload the entire O/S again?

View 9 Replies View Related

Windows 7 Unresponsive - Current Pending Sector Count Yellow

Oct 17, 2012

I bought this computer three months ago, and had no problems, up until now. It all started with it freezing up all of a sudden, forcing me to restart. But the display didn't show up. Tried again. Didn't work. Eventually, I removed my GPU and placed it back again, thinking it was loose. Then it finally worked.

Then it happened again. So after taking out my graphics card twice, it finally started working, but my HDD started making strange sounds. A sound I've never heard before, and only occurred during start up. I shrugged it off.

Now I start getting these sort of instances, when what ever program I have open, stops responding and Windows get's pretty laggy. The Windows Explorer (Not IE, the tool bar thing) also is unresponsive. I know it can't be a virus, Trend Micro showed no signs of anything after I scanned my computer a bunch of times.

So I did what any sane person would do, I did a bit of research on the net, and found this thread on this forums. The person here had a similar problem that I did. After reading most of the comments, I downloaded HDD SMART, as instructed, and apparently "Current Pending Sector Count" is yellow.

View 3 Replies View Related

External Hard Drive - Drive Letter Changed - Unable To Change Back?

Aug 21, 2012

I have a USB external hard drive that I keep all my documents etc on (had it for years)I upgraded from Vista Home to & Home Premium then had to upgrade recently to Professional to run my Sage. Through all these upgrades my ext. drive ran fine. Occasionally the drvie letter would change if I had something else plugged into the USB, this was always easily corected in disk management by changing the drive path.The connection on the case packed up so I had to get the drive put into a new case, now when I plug it in the drive is assigned G instead of F, I tried to change the drive letter allocation in Disk Management but it won't let me as the program still thinks I have a second ext. hard drive which is labelled F. I suspect this has happened because when the usb connection broke the drive was disconnected suddenly instead of a proper eject.How do I get Disk Management to remove the inactive drive - i can't find any obvious way - eject, delete etc are all missing when I click on tools or tasks.

View 2 Replies View Related

Hard Drive Partition: Adding Free Space Back To C Drive?

Sep 7, 2012

I installed Ubuntu on my computer a few months ago and created another partition for it on my 1TB hard drive. I didn't really care for Ubuntu so I decided to delete the partition it was on. That might have been a mistake. Well, now there's 87.68GB of free space on my hard disk that I can't use and I don't know how to add it back to my c: partition.

There was another post about this a couple years ago, but I don't understand the instructions and am not actually sure if it worked. Can someone explain how to do this, please? I'm not completely computer illiterate, but I'm not familiar with partitioning disks. It was just the one time with Ubuntu.

View 4 Replies View Related

Accidentally Changed Hard Drive With OS To Dynamic Drive.startup Fail?

Sep 23, 2010

My laptop is Acer with Windows 7 home premium 64 bit OS. It contain only 1 single partition disk that is c drive only.Recently, i accidentally convert the c drive which contain OS into dynamic disk.After i restart the laptop, it shows the following: BootMgr is missing Please press Alt, Ctrl +del to restart Now, i not able to enter the window. I am so worry because my important data is kept inside the hard disk, and i still not yet do any back up copy on it.I searching on this forum and learnt that i need a window 7 installation disk to repair it, but my problem is the computer dealer not give me any windows 7 installation disk when i baught this laptop as their said all the driver and windows program already kept in side the harddisk.I tried to remove the laptop hardisk which is a 500GB toshiba SATA hardisk. Then, i use the other laptop with Windows XP professional with the intention to copy yhe file inside the toshiba hard disk.However, after plugged in the hard disk to the other laptop, under the disk management, it shows that the toshiba disk as : dynamic disk, unreadable.i having problem to backup the data inside the toshiba hard disk.....

View 8 Replies View Related

Random Floppy Drive Seek And Hard Drive Light Flashing?

Dec 13, 2011

I've been noticing after re-installing Win 7 that I get random floppy drive seeks and the hard drive light flashes like crazy and then everything is fine again.I have Clamwin AV,Spyware Blaster and Spybot S&D installed,but that's it,no Windows Defender or Essentials AV.Any ideas what causes this? It's a minor annoyance,but I just want to make sure it's not damaging anything.Also would Readyboost help me? I've got 2 gigs dual channel PC3200 ram(or I could go with 2.5 gig single channel PC2700)and a P4 at 3 gig until I can afford to upgrade my comp.This is my first post in quite awhile so I hope this is in the right place

View 7 Replies View Related

Hard Drive Partition: Adding Free Space Back To C: Drive

Jan 15, 2013

I installed Ubuntu on my computer a few months ago and created another partition for it on my 1TB hard drive.

I didn't really care for Ubuntu so I decided to delete the partition it was on. That might have been a mistake. Well, now there's 87.68GB of free space on my hard disk that I can't use and I don't know how to add it back to my c: partition.

There was another post about this a couple years ago, but I don't understand the instructions and am not actually sure if it worked.