I was working on my computer when windows locked up and I was forced into a hard shut down, when I restarted the computer one of my hard drives showed up as invalid and my computer would not recognize it. When I tried to repair the sector to make it valid the it seemed to work, now my computer will not boot into windows at all. I have an SSD HDD set up and I need this computer as it is my main audio work station.
View 3 Replies
Have a netbook with Windows 7 Starter. It dualboots with Linux. My plan is to remove the Linux partition to make space on the hard disk. Obviously then the boot information, which is a GRUB, should be corrected. How can you edit this ahead of time, to allow a boot with a single entry? A netbook has no disk drive, so there is no repair disk available.
View 6 Replies View RelatedI recently had to replace my motherboard when a power failure killed my HP Compaq nx9420, running Windows 7. When the repair was complete, the laptop would no longer boot to Windows on the internal HDD. Instead it boots to startup repair. Startup repair fails with the message, "Cannot repair this computer automatically".
View 3 Replies View RelatedHave an issue with unmountable boot in windows 7. Do not have a repair disk or original disks since son purchase it from a friendI used an XP disk to get in cmd and did a chkdsk /r fixing bad sectors. Can i use the fixboot or bootrec.exe commands to fix the windows 7 boot issue?
View 2 Replies View RelatedI'm trying to educate myself on cloning i.e. bootable sector-by-sector replication, not just creating an image file of the used disk space. So far, I've bought a high performance HDD of the wrong size, trying to make sure that I replace it with an HDD with which my first cloning attempt will go without a hitch.
My laptop contains a 640GB Toshiba MK6465GSX HDD (Toshiba SDD - Product Detail). I am considering getting 640GB WD Scorpio Blue HDD for the cloning.
One of the constraints I want to observe is that I should be able to pick it up in person from one of the retailers in my city. However, they invariably carry the WD6400BPVT variant, which uses 4KB sectors ("Advance Format"). Nothing comes up in a search for "MKxx65GSX MKxx76GSX advanced-format" (without quotes), so I assume it has 512 byte sectors.
Is there a problem with cloning from a 512 bytes/sector HDD to an 4KB/sector HDD?
I have installed Windows 7 from my hard drive (E:). Now I have a small problem, the boot sector (or something like that) is located in E:, I want to move it to C:. Moreover there is two options in the bootscreen: Windows 7 and install Windows 7 RC. How I will remove the secon option?
View 4 Replies View RelatedRunning home premium on HP desktop.I installed an SSD and installed W7 on it. Unfortunately I didn't have the foresight to remove the old HDD first, and the W7 install kept the boot sector on the old HDD. Now of course when I remove the old HDD the system won't boot. I tried doing a repair with the W7 install disc. It does say it's repairing, but after many restarts there is still no boot sector on the SSD.So now I re-installed the old drive, but I eventually want to remove it. One additional thing that might help the diagnosis: On bootup I am presented with two W7 boot options. If I select the second W7 it comes back with "Windows failed to start" and then goes on to instruct me to reboot with the W7 disk and select "repair". But as I stated, I already tried that and it didn't work.I spent many hours setting up my W7 environment on the new drive, and I'd really like to fix this problem without doing a fresh re-install of W7.
View 3 Replies View RelatedYesterday, I was browsing on my computer and heard a weird clicking noise when the CD drive was running. About a few minutes after that, Firefox froze so I did a hard reboot, and up comes this message:
"No boot sector on internal hard drive No bootable devices--strike F1 to retry boot, F2 for setup utility Press F5 to run onboard diagnostics."
I have no idea what it means, and I've been everywhere trying to do System Restore using the Windows 7 reinstallation disk, but unfortunately I couldn't create a restore point because my jump drive doesn't have enough space and Startup Repair couldn't solve my problem. I've even tried the bootrec.exe on Command Prompt but I had no idea what to do. This is the first time that this has happened to me. My laptop is a Dell Inspiron 1545 and I have Windows 7 Home Premium 64-bit.
I'm on a tight limb about this problem right now because my warranty expired in early June this year, and I don't have the money for them to look at it, let alone buy a brand-new hard drive.
My wife shout down her computer this morning took it on remote location for work today but never booted it up. When she got back home tonight it wouldn't boot up. I don't know what to call these screen but some Startup Repair screen. Just says Repair action: Boot sector repair, Result: Failed.I downloaded and burned to CD the boot CD for the MiniTool Partition Wizard Home Edition but I don't know what disk I am even looking for. I see 3 partitions listed for one disk.The only one with a label is BDEDrive and it's 300 MB. The other two have *: as what I would call a label. One is 297.79 GB and the other is 12.34 MB. The BDEDrive is the only with with status of Active. NTFS on that partition and Other on the big partition.
View 7 Replies View RelatedI have a Dell Inspiron that is running Win7 Home premium 64 bit and I am getting an error message while booting up it states "No boot sector on internal hard drive. No bootable devices--strike F1 to retry boot". When I strike F1 it boots just fine.
View 9 Replies View RelatedIt's a dell latitude, 1 year old. Laptop suddenly crashed and when the laptop booted it said: "no boot sector on internal hard drive". I tried repairing the boot sector with the windows repair function, but the hard drive is just empty... nothing to repair. Then I tried to boot off a ubuntu live cd. which worked. and showed me an empty hard drive with the_maximum_capacity_of_the_drive_GB of unallocated space.
Since that I reinstalled windows 7 two times, and stopped working after an hour or so. I installed ubuntu, which worked for several days. then i tried windows 7 again (clean install). And then I kept working on the laptop for a couple of hours until the "crash" happened. All the programs stopped working suddenly. When I opened anything I was shown this error: "Illegal operation attempted on a registry key that has been marked for deletion."
After that everything is lost if I turn the computer off. And I'm back at an empty unformatted hard drive. I changed the sata operation mode in the bios to different options before every installation of windows. I didn't try xp, because I don't have dell-xp cd's . Is the hard drive broken? I guess not because ubuntu works. and windows 7 also, but it just goes away suddenly... Here's a video (shot in portraitmode) of the event... [URL].
I have a Toshiba Satellite C655-S5132 that just shut down & now will not boot Windows 7. Just goes to black screen w/blinking cursor then goes to 'startup repair' (which I'm postiive this is a virus of somekind) & will not allow me to do anything. Just repeats itself. I downloaded Windows 7 repair to a CD-R, chgd BIOS settings to CD/DVD to boot first, saved changes, and will NOT pull/boot up from disc. I've tried 2diff repair discs, both do not work. 'F8' does not do anything for me, not able to get to 'safe mode'. Computer is only 2yrs old.
View 9 Replies View Relatedwindows 7 startup repair on every boot but after startup repair hibernate works. How to fix?
View 1 Replies View RelatedHave dual boot; XP and 7. 7 will no longer boot, asking for the installation CD. I don't have an installation CD, only the one that puts everything back as it was when purchased. Can I get a boot file that will boot from USB? Or since I can see the 7 drive from XP, could I add a file to Win7? I checked on EasyBCD that is supposed to work, but I' use RollBack and it won't work with RollBack installed. I'm afraid to uninstall RollBack since it has saved me so many times in the past.
View 3 Replies View RelatedI've got 5 PCs here.. 2x Win 7 x64 v7100, 1x Vista x32, 2x XP Pro x32. Strangely, within the past 24 hours both of my Windows 7 PCs have stopped booting. They turn on, hard drives spin, fans come on. There is no beep, and no signal to the peripherals, including keyboard, mouse, monitor. Identical problems on both systems.
Specs on Windows 7 System 1 (2 years old):
Motherboard Asus P5N32-E SLI
CPU Intel Core 2 Extreme QX6850 Quad-Core 3.0GHz
Ram 4 x OCZ DDR2-800 Reaper 2048MB
Video Card 2 x Asus GeForce 8800 Ultra 768MB
Power Supply Silverstone ST1000 1000W
Specs on Windows 7 System 2 (1 month old):
Motherboard Asus P5Q-EM
CPU Intel Core 2 Quad Q9650 Quad-Core 3.0GHz 95W
Ram 4 x Kingston ValueRAM DDR2-800 2048MB
Video Card Asus GeForce 9600GT 512MB Silent
Power Supply Corsair VX 450W Power Supply
I suppose it's possible that both motherboards just coincidentally failed in the same day but that seems pretty unlikely. They are both ASUS. On System 2, the second system to fail, I did notice that the computer had been on with the screen saver up for a little while. Someone had been using it only about 20 minutes earlier. I thought it'd entered power saving mode and turned off the screen but when I went to bring it back up, I couldn't. I noticed that the light on the front of the box was flashing. I tried powering off by holding down the power button, then powering back up but had no luck. I also tried turning it off at the power supply and unplugging it for a few minutes but that didn't help either.
my 3 day old Win7 Ultimate innstallation on my 3 day old computer just crashed after trying(or maybe succeding) to innstall Service Pack 1.
This is how the screen looks when I try booting. [URL]
I have tried all safety modes, last known good config. Debugging mode. The Windows 7 DVD(tells me the chosen OS version can not be repaired), none of these options worked. What else can I try?
Could this be the punishment for not getting genuine windows and using a loader? Can it be saved?
3 day old Win7 Ultimate innstallation on my 3 day old computer just crashed after trying(or maybe succeding) to innstall Service Pack 1.This is how the screen looks when I try booting.I have tried all safety modes, last known good config. Debugging mode.The Windows 7 DVD(tells me the chosen OS version can not be repaired), none of these options worked.What else can I try?Could this be the punishment for not getting genuine windows and using a loader?
View 1 Replies View Relatedmy 3 day old Windows 7 Ultimate innstallation on my 3 day old computer just crashed after trying(or maybe succeding) to innstall Service Pack 1.I have tried all safety moodes, last known good config. Debugging mode.The Windows 7 DVD(tells me the chosen OS version can not be repaired), none of these options helped.What else can I try to get past this madness?Could this be the punishment for not getting genuine windows and using a loader?
View 9 Replies View RelatedHardware Information (This is from memory and may not be completely accurate):The computer model is emachines The processor is a dual core Intel Pentium The graphics card is NVIDIA (Can't remember the model.)4GB of RAM installed Software Information (Also from memory, but this is likely to be more accurate than the hardware.): Windows 7 Home Premium 64bit Antivirus software is Comodo Internet Security - Also the firewall (product information).I often used Advanced System Care for optimization.-product information.after searching the internet for ways to fix my problem for the past three days, I'm at a complete loss. I was told by a professional that my registry was likely corrupted and that my best bet would be to re-install Windows entirely. I was hoping it wouldn't come to that, but was prepared nonetheless.So I inserted the installation disk, and wouldn't you know it, the installer wouldn't recognize my hard drive (BIOS recognizes it though). Searching for reasons why this was happening only turned up people saying to make sure it was recognized by BIOS, which I considered a no brainier. When it still didn't work for people in certain threads, they were told to try wiping their hard drives. I've done it. Windows still doesn't want to notice my hard drive.After that, I decided to try and install Windows to an external hard drive. I know this isn't how Windows was designed, and I knew it wasn't how Windows was meant to be used, but I was (to my knowledge) out of other options (Also, the external hard drive has 1 TB of space on it, so I wasn't concerned about speed loss). So, I searched for ways to do that, and I came across PWboot. The first half of the installation worked, the second half did not. I began getting an error that read (bootmgr is missing press ctrlalt+delete to reboot.) Which I did. But that didn't fix anything. So I tried the entire process again, and it didn't work.The "Repair your computer" feature in the windows install disk turned up nothing as well. I can't "Factory Reset" because it can't detect any installation of windows, the startup repair function can't "repair this computer automatically", and none of the other options will even open (with the exception of the command prompt, but most of the commands aren't valid for some reason.)
View 9 Replies View RelatedOver last week i had problem in my Windows7 to boot I get Over than 20minute to boot (Repair/Formate Or normal boot or in CD)despite my config :
Os : Windows Xp
CPU : Core2Duo e4600
Gpu : Nvidia Ge Force 9500GT
Ram : 2go
I have a HP labtop and my laptop froze all of a sudden so I did a hard restart of the computer. After restarting the computer I am no longer able to boot my computer up, the screen will go black sometimes after the log in screen. But now I do not even get the option to go to the log in screen now it just goes to the startup recovery stage. Everytime I try to fix start up I get startup repair off line following by the details of 0.00000 or something like that. The numbers are all zeros in the details but I tried other options like restoring to a previous point and I keep getting errors.
View 5 Replies View RelatedToday I did a fresh install of Windows 7 Build 7232 because it was newer and also because Build 7077 would no longer boot. I have reinstalled 7077 and reinstalled 7232 twice. Windows works okay for a while and then will freeze and I will have to power off the PC and restart. But when I try to turn it back on it hangs at the Starting Windows screen. My other desktops have no troubles with Windows 7 at any build. I can start in Safe Mode but nothing else. Thanks in advance.
PS I had just finished installing Adobe CS4 software and was using Google Chrome when it froze. BD 09 is my antivirus with firewall disabled, firewall is Windows Firewall. And all are x64 installations.
Let me explain, I just noticed that when I restart my pc, the restart precess seems to hang at the motherboard screen for more then 3 times the time it does when I boot the pc from being switched off(a good 15-20 seconds at Mobo screen on restart).
The problem is I think it only started doing this after I accidentally uninstalled a hard drive driver and the pc shut down(and I think restarted). The hard drive seems fine now, the driver was reinstalled, I'm just a little concerned I could have caused a problem, or is this normal?
So the question is simple, Is it normal for a pc to take longer(at least 3 times) at the motherboard screen when you restart then when you boot up from an off position. If the answer is no then I suspect it could be something I've done to it, as I never noticed it taking that long before.
My basic pc spec is:
i5 2500
assus h67
8gb ram
560ti
I just checked, when I start up the pc normally it stays on motherboard screen for 6 seconds, when I restart it stays on the screen for 24 seconds.
All I have a dual boot Win 7 and XP, I want to remove the XP as I no longer use it. Both are active and on seperate discs, can I just format the disc? I have used easy BCD to edit the boot menu so only Windows 7 default yes.
View 4 Replies View RelatedSo I finally got around to checking one of my set ups and I discovered that it does not have the Windows 7 100MB section on the SSD. I double checked with Macrium and sure enough, there is no 100MB section on the SSD.
Is there a way to install it without having to reload the entire O/S again?
Recently my laptop which is an Asus N53S, is not been able to boot windows 7. When I try and do a start up repair, it is unable to repair. Then, I also made a windows 7 system repair disc, it ran fine but it was unable to fix my problem as well. I tried to hook up a printer to my laptop but did not succeed cause I had no internet or driver discs to install at the time. Also, I install a program called desa? for downloading blackmesa source.
View 5 Replies View RelatedI bought this computer three months ago, and had no problems, up until now. It all started with it freezing up all of a sudden, forcing me to restart. But the display didn't show up. Tried again. Didn't work. Eventually, I removed my GPU and placed it back again, thinking it was loose. Then it finally worked.
Then it happened again. So after taking out my graphics card twice, it finally started working, but my HDD started making strange sounds. A sound I've never heard before, and only occurred during start up. I shrugged it off.
Now I start getting these sort of instances, when what ever program I have open, stops responding and Windows get's pretty laggy. The Windows Explorer (Not IE, the tool bar thing) also is unresponsive. I know it can't be a virus, Trend Micro showed no signs of anything after I scanned my computer a bunch of times.
So I did what any sane person would do, I did a bit of research on the net, and found this thread on this forums. The person here had a similar problem that I did. After reading most of the comments, I downloaded HDD SMART, as instructed, and apparently "Current Pending Sector Count" is yellow.
I've installed Windows 7 alongside Ubuntu and was using grub2 bootloader, after changing my graphics card and moving removing some old hard disks when I try to boot the Windows partition I get the blinking underscore screen indefinitely.I tried recovery from the DVD, the Windows install is not recognised in the list, it's just empty, clicking load drivers I can navigate to the drive - it's there as D:, I can see the Windows directory and files, the C drive is another NTFS partition without a Windows install. As it doesn't recognise the install, startup recovery doesn't work.I then tried bootrec and bcdedit from the command line, eventually I hit a wall with an error that there is no recognised file system - despite it being available in the Load Drivers dialog earlier.
View 2 Replies View RelatedI've been having trouble trying to get my computer to boot; I'd noticed a drop in performance (still unsure why) so decided to boot up in safe mode and poke around - it was not my original intention to install AC 5.3.0 but somehow it happened. I ran the 'deep-care' utility and everything was working fine, my computer rebooted and performed a disk check: there weren't any errors that I can remember apart from [something along the lines of] 60 reparse files. Following this my computer restarted and Windows failed to load, restarting to show me startup repair - this isn't the first time this has happened, a similar thing occurred following previous attempts at boosting speed, though before I was able to get Windows up and running using an Ubuntu installation disk... still don't understand why - no need to say that it didn't work this time. Startup repair refuses to work and my system restore points have vanished; I would try doing a repair install if I had a copy of the disk. I built the computer myself a few months back, borrowing a Windows 7 installation disk from a friend (who has now conveniently lost said disk), startup repair does tell me something about 'Problem Signatures'. [code]
View 2 Replies View RelatedI just created a system repair disc by clicking "Create a system repair disc" on my computer. The disc was successfully created, then I went to boot it up in VirtualBox and I get a Toshiba error: F3-F100-0003. How could this be? I don't think VirtualBox or the repair disc would have anything to do with Toshiba. I created this disc with a factory preinstallation of Windows 7 on a Toshiba laptop. Did Toshiba put a custom disc image on the computer which will be burned to the disc? Does VirtualBox use the host computers BIOS? (maybe not possible because there was a Windows 7 cursor in front of the error box) Does Microsoft use Toshiba technology in their repair discs?
View 3 Replies View RelatedSo yesterday I added another hard drive to my computer. I now have 2 SATA hard drives running in my machine. I used the disk managment, and the 2nd hard drive is working as it should.
However, when I shut down my computer and turned it back on, Windows will boot to the Startup Repair screen every time. I checked the BIOS and made sure the boot order was correct, and even took the 2nd hard drive off the boot order in order to make sure it wasn't causing any issues. It's pretty annoying, because every time I start up, I have to wait for the whole repair process before it will load normally. Each time it always says that there are no repairs that could be made.
I also am not able to put my computer in sleep mode any longer. I believe my BIOS setting is set to S1, and before I never had any problems. I would put my comp to sleep and everything would be fine. After the 2nd hard drive, my monitor will turn off and it sounds like 1 of the hard drives turns off, but the CPU and fan are still running and it does not completely go to sleep.
