Recover A HDD After Erasing The First Sector?
Oct 4, 2012
HDD: ST30005 28AS. Failing. I have to recover some data and throw it away. With Seatools dos cd, I accidentally the first sector. I also set it at that time at 33 gb. Now I can't see any partitions in it. I tried everything in HIREN's boot cd. The drive was failing, 15 minutes at windows loading, SMART messages to backup it, etc. I low level formatted it when it was 33 GB. My data is a few GB beyond anyway. However I played with it I can't read anything from it. Help.OK, so the drive is my third, a storage drive. I disconnected the other drives, inserted the Windows 7 recovery disk, but it didn't do anything. I couldn't find the ol' cmd menu I knew from other times. (Info or help -> a series of commands, including fixmbr.) It found the drive, but couldn't say anything about it. So no access, no identity, no status of it, nothing. Windows keeps telling me to replace the drive, but sees no volume informations. How the hell can a drive become invisible at any kind of content mode? I just used the menu from seatools and it vanished. How can it offer a delete for first sector but no fresh write of it?
View 1 Replies
ADVERTISEMENT
Dec 18, 2011
I'm trying to educate myself on cloning i.e. bootable sector-by-sector replication, not just creating an image file of the used disk space. So far, I've bought a high performance HDD of the wrong size, trying to make sure that I replace it with an HDD with which my first cloning attempt will go without a hitch.
My laptop contains a 640GB Toshiba MK6465GSX HDD (Toshiba SDD - Product Detail). I am considering getting 640GB WD Scorpio Blue HDD for the cloning.
One of the constraints I want to observe is that I should be able to pick it up in person from one of the retailers in my city. However, they invariably carry the WD6400BPVT variant, which uses 4KB sectors ("Advance Format"). Nothing comes up in a search for "MKxx65GSX MKxx76GSX advanced-format" (without quotes), so I assume it has 512 byte sectors.
Is there a problem with cloning from a 512 bytes/sector HDD to an 4KB/sector HDD?
View 8 Replies
View Related
Feb 7, 2012
I dont click on it but it erases stuff like moving objects or videos.. you just move it around and it erases white . what is causeing that....this is a mouse that I use with my laptop?
View 10 Replies
View Related
Feb 16, 2012
so i have a job coming up that requires carefull erasing of data, i can't scrub the whole hard drive but need to be able to write over the data areas of one single user account location.
now i am wondering is there a way to find out the sector locations for all data on a hard drive for a given user so i can write over those areas to make them as unrecoverable as possible?
i am aware that i am probably asking for something that isn't possible but figured why not ask anyway someone might know of some software that does this.
View 4 Replies
View Related
Jan 15, 2013
I have a dell dimension 9100. I have two drives on it, a ~160gb drive that came with it with xp, and a 500gb drive with Windows 7. I put the Windows 7 in myself and had been using that. Finally, I decided to erase the old drive with xp on to install linux on it. After erasing the old drive, my computer won't start up. It says it cant find sata 1 or 3. I've tried switching the cables hooking up to it but that f I push continue after it tells me how it can't find them, it says 'loading pbr for descriptor 2...done' and stays there. I did not erase windows 7, I checked. Whats wrong? I erased the old drive so I could install ubuntu on it... I'm guessing since thats the drive the computer came with, I deleted the mbr... I have an external drive with ubuntu I can use to fix this. Before you say to use the windows install disk to fix it, I've already tried that. The repair utility doesn't scan and thus doesn't see my install.
The more I think about it, the more that it seems like its NOT an mbr thing. I think this because of the fact that the windows repair disk doesn't see any installation of windows.The hard drive is not dead. I can read it via ubuntu. Sorry if this thread is hard to understand, I've copied and pasted on multiple forumsHeres the latest: Disabled all other sata's in the bios except the one the drive is plugged to. Now I no longer see sata3 not found or anything.
View 9 Replies
View Related
Sep 20, 2012
If I erase my hard drive can I reinstallWindows on that drive.
View 4 Replies
View Related
Feb 20, 2012
my dad got a new pc and so I rand a back up from his old one to the new with a seagate network hard drive and he returned the old one the problem is that now there are multiple duplicates of his documents and pictures is there a non-risk painless way of getting rid of those duplicates as there are thousands of duplicates?
View 1 Replies
View Related
Jul 30, 2012
I have window 7 laptop ie 8 and my wirless mouse is eraseing pages like a blackboard.
View 9 Replies
View Related
Jun 8, 2011
I have a desktop and have 2 hard drives 1 is running Windows 7 and 1 is running Windows Vista. I would like to completely erase the hard drive so there is no operating system on it (the Vista drive). I would still like to store files on it. I have looked out there on google but I would not like to use third-party software.
View 3 Replies
View Related
Nov 16, 2011
I installed Windows 7 ultimate 64bits and since I use Google chrome, I installed that, with the toolbar, but every time I reboot PC, CHrome is goneOn the toolbar is only IE8...What is going on? On XP this never happened??Can I safely get rid off IE and "keep" Chrome? I am afraid to delete it, or uninstall it cause I might not have a IE at all.
View 4 Replies
View Related
May 29, 2011
I have a 500 gb weston digital portable hdd. I use a casing to use it in my pc. I recently checked that there are many bad sectors in my hdd. Is it possible to remove that bad sectors by self. Or as it's in warranty, send it to the company and they'll take care of.
View 2 Replies
View Related
Jun 22, 2009
I have installed Windows 7 from my hard drive (E:). Now I have a small problem, the boot sector (or something like that) is located in E:, I want to move it to C:. Moreover there is two options in the bootscreen: Windows 7 and install Windows 7 RC. How I will remove the secon option?
View 4 Replies
View Related
Oct 23, 2011
I have a processor that is capable of handling a 64 bit operating system. Right now I am currently running a 32 bit operating system. Is there any way I could install 64 bit Windows 7 Ultimate without erasing my entire operating system?
View 4 Replies
View Related
Jan 4, 2012
how it get bad sector on my hard drive?
View 2 Replies
View Related
Dec 27, 2012
Running home premium on HP desktop.I installed an SSD and installed W7 on it. Unfortunately I didn't have the foresight to remove the old HDD first, and the W7 install kept the boot sector on the old HDD. Now of course when I remove the old HDD the system won't boot. I tried doing a repair with the W7 install disc. It does say it's repairing, but after many restarts there is still no boot sector on the SSD.So now I re-installed the old drive, but I eventually want to remove it. One additional thing that might help the diagnosis: On bootup I am presented with two W7 boot options. If I select the second W7 it comes back with "Windows failed to start" and then goes on to instruct me to reboot with the W7 disk and select "repair". But as I stated, I already tried that and it didn't work.I spent many hours setting up my W7 environment on the new drive, and I'd really like to fix this problem without doing a fresh re-install of W7.
View 3 Replies
View Related
Nov 24, 2012
Have an issue with unmountable boot in windows 7. Do not have a repair disk or original disks since son purchase it from a friendI used an XP disk to get in cmd and did a chkdsk /r fixing bad sectors. Can i use the fixboot or bootrec.exe commands to fix the windows 7 boot issue?
View 2 Replies
View Related
Oct 9, 2012
I was working on my computer when windows locked up and I was forced into a hard shut down, when I restarted the computer one of my hard drives showed up as invalid and my computer would not recognize it. When I tried to repair the sector to make it valid the it seemed to work, now my computer will not boot into windows at all. I have an SSD HDD set up and I need this computer as it is my main audio work station.
View 3 Replies
View Related
Mar 3, 2012
Have a netbook with Windows 7 Starter. It dualboots with Linux. My plan is to remove the Linux partition to make space on the hard disk. Obviously then the boot information, which is a GRUB, should be corrected. How can you edit this ahead of time, to allow a boot with a single entry? A netbook has no disk drive, so there is no repair disk available.
View 6 Replies
View Related
Nov 28, 2011
Yesterday, I was browsing on my computer and heard a weird clicking noise when the CD drive was running. About a few minutes after that, Firefox froze so I did a hard reboot, and up comes this message:
"No boot sector on internal hard drive No bootable devices--strike F1 to retry boot, F2 for setup utility Press F5 to run onboard diagnostics."
I have no idea what it means, and I've been everywhere trying to do System Restore using the Windows 7 reinstallation disk, but unfortunately I couldn't create a restore point because my jump drive doesn't have enough space and Startup Repair couldn't solve my problem. I've even tried the bootrec.exe on Command Prompt but I had no idea what to do. This is the first time that this has happened to me. My laptop is a Dell Inspiron 1545 and I have Windows 7 Home Premium 64-bit.
I'm on a tight limb about this problem right now because my warranty expired in early June this year, and I don't have the money for them to look at it, let alone buy a brand-new hard drive.
View 7 Replies
View Related
Jan 15, 2013
My wife shout down her computer this morning took it on remote location for work today but never booted it up. When she got back home tonight it wouldn't boot up. I don't know what to call these screen but some Startup Repair screen. Just says Repair action: Boot sector repair, Result: Failed.I downloaded and burned to CD the boot CD for the MiniTool Partition Wizard Home Edition but I don't know what disk I am even looking for. I see 3 partitions listed for one disk.The only one with a label is BDEDrive and it's 300 MB. The other two have *: as what I would call a label. One is 297.79 GB and the other is 12.34 MB. The BDEDrive is the only with with status of Active. NTFS on that partition and Other on the big partition.
View 7 Replies
View Related
Feb 6, 2013
So I finally got around to checking one of my set ups and I discovered that it does not have the Windows 7 100MB section on the SSD. I double checked with Macrium and sure enough, there is no 100MB section on the SSD.
Is there a way to install it without having to reload the entire O/S again?
View 9 Replies
View Related
Oct 7, 2011
I have a Dell Inspiron that is running Win7 Home premium 64 bit and I am getting an error message while booting up it states "No boot sector on internal hard drive. No bootable devices--strike F1 to retry boot". When I strike F1 it boots just fine.
View 9 Replies
View Related
Oct 17, 2012
I bought this computer three months ago, and had no problems, up until now. It all started with it freezing up all of a sudden, forcing me to restart. But the display didn't show up. Tried again. Didn't work. Eventually, I removed my GPU and placed it back again, thinking it was loose. Then it finally worked.
Then it happened again. So after taking out my graphics card twice, it finally started working, but my HDD started making strange sounds. A sound I've never heard before, and only occurred during start up. I shrugged it off.
Now I start getting these sort of instances, when what ever program I have open, stops responding and Windows get's pretty laggy. The Windows Explorer (Not IE, the tool bar thing) also is unresponsive. I know it can't be a virus, Trend Micro showed no signs of anything after I scanned my computer a bunch of times.
So I did what any sane person would do, I did a bit of research on the net, and found this thread on this forums. The person here had a similar problem that I did. After reading most of the comments, I downloaded HDD SMART, as instructed, and apparently "Current Pending Sector Count" is yellow.
View 3 Replies
View Related
Jun 11, 2011
I`ve got a serious problem with my vaio. i was surfing the net that i faced a BAD SECTOR ERROR on system 32. As I closed the ERROR,the system restarted. When I select the windows 7 to boot, the windows logo page come and restart again and again.Even when i decided to install a new version or repair it,the installation found no drive to install on.\
View 1 Replies
View Related
Jun 3, 2011
It's a dell latitude, 1 year old. Laptop suddenly crashed and when the laptop booted it said: "no boot sector on internal hard drive". I tried repairing the boot sector with the windows repair function, but the hard drive is just empty... nothing to repair. Then I tried to boot off a ubuntu live cd. which worked. and showed me an empty hard drive with the_maximum_capacity_of_the_drive_GB of unallocated space.
Since that I reinstalled windows 7 two times, and stopped working after an hour or so. I installed ubuntu, which worked for several days. then i tried windows 7 again (clean install). And then I kept working on the laptop for a couple of hours until the "crash" happened. All the programs stopped working suddenly. When I opened anything I was shown this error: "Illegal operation attempted on a registry key that has been marked for deletion."
After that everything is lost if I turn the computer off. And I'm back at an empty unformatted hard drive. I changed the sata operation mode in the bios to different options before every installation of windows. I didn't try xp, because I don't have dell-xp cd's . Is the hard drive broken? I guess not because ubuntu works. and windows 7 also, but it just goes away suddenly... Here's a video (shot in portraitmode) of the event... [URL].
View 8 Replies
View Related
Aug 29, 2012
I have a 300GB WD VelociRapter, a few years old, I bought to use as my C: drive because of the extra RPM/speed(supposedly). I partitioned it in half and it worked fine until recently it started intermittently getting BootMgr missing errors on startup. After trying and failing to fix the problem directly , I decided to install a different boot drive to fix the problem.The problem now is I cant get the VelociRapter to mount, Drive Mngr wants to initialize it, the handful of data recovery progs that i have run show no files to recover and the size to be 0.5 kb.
View 7 Replies
View Related
Oct 12, 2011
c drive automatically fill up
View 3 Replies
View Related
May 28, 2012
I was playing Dirt 2 the other day and when I pulled the the driving wheel out of the USB slot the BSOD screen showed up and the computer shut down.I tried to boot but it didn't load Widnows.The Startup Repair couldn't do anything, I don't have a mounted ISO of my sistem nor any restore points created.I can't even boot to safe mode.I checked the whole system with Kaspersky Rescue CD and it found 7 threats, including back doors, trojans and a worm. Kaspersky then deleted all the malitious files and as far as I know none of them were system critical. But windows still won't boot. What should I do?
View 9 Replies
View Related
Jul 1, 2010
I changed my motherboard and disconnected all of my drives apart from the one I thought was my C drive. Alas it was not and had some very important folders in it.I started to install windows and got to the drive option and formatted it and as soon as I had I realised which drive it was. I did not go any further with the installation so nothing has written over it.Can anyone advise what my options are if any to recover this drive?
View 9 Replies
View Related
Jun 17, 2012
is here possible to recover old files from broken HDD to new HDD?"broken HDD" don't work anymore.
View 1 Replies
View Related
Aug 8, 2012
When i press f3 to do a recover of my PC i get the following message:your operating system drive's label is not os_install. Set it to os_Install and do f3 recover later
View 1 Replies
View Related
