When I clean installed Windows 7 it would create 3 partitions
0 byte = unallocated
100MB - reserved
and 80GB (the rest) = install
Somehow, I eventually got rid of that 0 byte partition during one of my reinstalls.I thought I knew how I did it, but apparently not.I am trying to install W8 on a spare drive that I probably tried unsuccessfully to image my Windows 7 system to when it still had the 0 byte partition.
have looked many different forums and different solutions but nothing is working to delete this file from my desktop.I let my sister borrow my laptop while I was away, and she had downloaded these torrent's to my system. Leaving the torrent files on my desktop. I was able to delete them all apart from one.I can't budge it. I've used FileAssassin, LockHunter etc and I've also used CMD prompts.CMD prompt comes back with the answer that the file cannot be found, when it is starting right at me on the desktop. I can't move it to another folder, or rename it. FileAssissin can't find it and LockHunter can't find it. Unlocker didn't work either.
View 9 Replies View RelatedUltimate family tree compatibility upgrade to 64 bite systemhow dies it work?
View 1 Replies View RelatedI'm trying to educate myself on cloning i.e. bootable sector-by-sector replication, not just creating an image file of the used disk space. So far, I've bought a high performance HDD of the wrong size, trying to make sure that I replace it with an HDD with which my first cloning attempt will go without a hitch.
My laptop contains a 640GB Toshiba MK6465GSX HDD (Toshiba SDD - Product Detail). I am considering getting 640GB WD Scorpio Blue HDD for the cloning.
One of the constraints I want to observe is that I should be able to pick it up in person from one of the retailers in my city. However, they invariably carry the WD6400BPVT variant, which uses 4KB sectors ("Advance Format"). Nothing comes up in a search for "MKxx65GSX MKxx76GSX advanced-format" (without quotes), so I assume it has 512 byte sectors.
Is there a problem with cloning from a 512 bytes/sector HDD to an 4KB/sector HDD?
Remember when you installed Windows 7, there was that one setup thing that asked you for the time, your username, and password?Ok so my friend wanted me to upgrade his HP laptop to Windows 7, since he originally had the you-know-is-junk version of windows (Vista).I was able to install all of the software, but what I want to know is if there's a way to run that configuration setup thing again.
View 1 Replies View RelatedAfter all the trouble that I went to remove the old partitions on the HD in my secondary rig, I forgot to disconnect a second HD installed, and after going through a number of other repairs just before starting the installation, I wasn't thinking clearly and deleted the partitions that I had made with the HD installed on my primary rig.
Attempting to recreat the partitions with the installation procedure got things even more messed up because I didn't find any facility for actuallyt creating a partition of the size that I wanted, only a format function, which I assumed would format the entire drive, or as I did, click Next, hoping to find something more in the next screen, but it then just started the installation itself, and took the entire drive, except a 100MB partition that it also created for the system reserved functions.
Not being in the mood to once again remove the harddrive back to my primary rig for prep, I let it continue the installation, because it would not permit me to delete the partitions that it had made. I'm hoping that I can resize the main partition after the install completes, but if like when I installed the x32 bit version in this manner, it scattered files across the partition in a fashion that would make it difficult to do so.
On my primary rig, I have the entire OS installed on one neat 100GB partition, and that is what I want here also. I'm trying to decide whether to nuke the HD again, or finish the installation and attempt to customize it afterward. Which would be better?
Remember when you installed Windows 7, there was that one setup thing that asked you for the time, your username, and password?
Ok so my friend wanted me to upgrade his HP laptop to Windows 7, since he originally had the you-know-is-junk version of windows (Vista).
I was able to install all of the software, but what I want to know is if there's a way to run that configuration setup thing again.
I've just built my first PC which uses a MSI Z77A-GD65 MOBO.I burned the Windows 7 .iso file to a DVD and tried to boot it from that (I went into the BIOS and explicitly stated for the system to do so) However when I do, it produces the phrase "Reboot and Select proper boot device or insert boot media in selected boot device and press a key".The disk is brand new and clean and the LED on the optical drive flashes as if attempting to read from the disk but to no avail.I have also put the .iso file onto a flash memory stick and tried to boot it from that it says "SYSLINUX 4.03 2010-10-22 EDD Copyright (C) 1994-2919 H. Peter Anvin et al.ERROR: No configuration file found.No DEFAULT or UI configuration directive found!" then it asks me "boot:"When I type in the .iso file name, it says EDIT: "Invalid or corrupt kernel image." but I can view the .iso fine on windows explorer on my other computer.
View 6 Replies View RelatedSet-up isn't finishing as the install will crash BSOD 0x0116 with atikmag.sys causing the problem.(**Note, there is NO Minidump found after this crash - I"ve lookedlooked.. and looked... so I took a digital photo of the BSOD screen in the moments it flashed)I can't complete the install using safe mode, but in safe mode I can get to the part where set-up is trying to finish.So, how can I force the install to bypass graphics card driver install and install a standard SVGA driver until I can get the thing to finish set-up??
View 6 Replies View RelatedI've seen in many threads that there isn't just one specific thing to look for, because many things can cause your system to freeze.What I'd like to know is, what steps would a profesional take to find this issue?I've ran programs looking for spyware and viruses and seem to be clean:AVGSpybotad-awareThe strange thing is that, this only happens after my computer has been off for a few hours, and in the first 5 minutes of starting it up, it freezes completely, you can't move the mouse, pull up the task manager or anything.I power it down and back up, and normally I'm fine for hours on in, its just always that initial start up
View 3 Replies View RelatedWhen I get the login screen, I just see the buffer LED glowing for 1 minute. Then it calms down. Then after logging in, the buffer LED keeps glowing for 5 minutes and my computer is terribly slow. If I do nothing through all this operation and just wait, all will be okay. So usually I can use my laptop after 8 minutes from turning it on.On the other hand, if i directly start opening applications before the buffer LED turns off (sometime only firefox), I directly get the bsod. Each time I get a different code for it. Why is this happening? Please find below the laptop specs and things that I have tried. [code]
View 1 Replies View RelatedNew drive 1gb external, running bitlocker for the first time. Left it overnight cos it was taking forever, (which is the norm)
Woke up this morning and it was stuck on something like 47.1% requesting the bitlocker password, put that in and it starts encrypting again.... But every few random mins it falls over with an error message:
An Error Occurred The System cannot find the file specified. And prompts me to put my bitlocker password back in, for which I do, and the encrpytion starts again.
Its like at 50% now, after it falling over 3 times in the last 30mins.. I'm not exactly what to do.. I cant sit here for the next 10hrs waiting for it to fall over every few mins asking for the password.
I'd be up for scrapping the whole encrpytion and starting all over again.. But not exactly sure on how to permantely un-crypt the drive and reformat it ? Perhaps running a scandisk before doing so... It was a brand new drive.
I can actually still access the data, because autoplay opens after every error allowing me to see and open the files.
I am having a problem with my Windows 7 Pro edition when burning data to a CD-RW.When I add new data to existing data already burned on the CD-RW, the data has been written correctly to the disk, but when I view the disk after writing the new data, I never see the new data...the only data I see is the data that was written to the CD-RW at the FIRST burning. When I place my CD-RW in my other computer with Windows XP, all the data appears...initial burning and all subsequent burnings; place it in my Windows 7 CD drive and NO secondary data is showing.In one program I have for burning, I actually get a dialog box saying "the data has been written correctly to the disk, but the number of files does not match the expected file count. Most likely, the file system structure has not been written correctly and some files will not appear on the disk." What is going on with this "file system structure has not been written correctly?"This is a new wrinkle in the sheet for me. I have 5 CD/DVD read/write drives, and they all work the same...only initial files show and other files are not visible when re-burning to a CD-RW. It is really a new Agatha Christie mystery to me.
View 2 Replies View RelatedI have an HP Pavilion dv3 which was built with Vista Home Premium x64 and upgraded to Windows 7 almost a year ago. I recently purchased an Iogear GBU421 (Bluetooth 2.1 Mini Adapter) and followed the instructions in the included manual. I have a laptop with a slot-loading CD drive, so I downloaded the drivers from the Iogear webpage and installed from the setup.exe. I restarted my computer and tried to turn the device on from the system tray. What happens is the icon (which looks like a tall blue hexagon with a red X through it) disappears when I select "Turn Adapter On", and nothing happens. The icon reappears 1-2 minutes later. The following Bluetooth-related services are running currently: btwdins.exe, BTTray.exe.
I already tried un- and re-installing the device driver software, without success.
SOLVED: Turns out all I needed to do was have Windows Update install new driver software from the device manager. Bluetooth now behaves normally on my Bluetooth-ready cellphone.
I currently have 2 physical systems.I am trying to migrate over to the new system which has new hardware etc...Currently my existing system is running absolutely fine. WS2008R2 EE 64bit with all updates. The drives are SATA (there are physical disks on the system and none of them are RAID)my new system is using an Asus p6x58D-E mobo and has 1 SSD SATA as a bootable drive. I also have 3 other phyiscal disks on this system and one of them is a RAID0 (2x2TB non bootable).after 3 days and nights of clean installation (as I thought I was doing something unsupported... I install Windows on the SSD I create the RAID0 system on the 2x2TB HDD I install the drivers (chipset, graphics, mobo and SATA/RAID). I then do Windows update.it finds 92 updates + 1 update for the onboard LAN.I install them but in the end it fails to install saying that there were installations in progress and should reboot to complete the updates.So I reboot and it gets into Windows doing some configuring, and then it restarts again. Then it just says:"Stage 3 of 3. Preparing to configure Windows. Do not turn off your computer And the progress is just going round and round. The system is not locked or anything. the new system has an i7 core Extreme 990x 3.46GHz gulftown CPU. right now, its just there... "configuring".
View 6 Replies View RelatedI've been wanting to upgrade to getting an SSD and I was just wanting to know does anyone know if you're able to install a copy of Windows twice if it's from an OEM copy? I bought an OEM off of Newegg and the only thing I thought was different was that it didn't come with a manual and other things that really aren't necessary, but I heard somewhere that you aren't able to use OEMs for doing a OS wipe and reinstalling and it's just a one time thing.
Will I have to also buy another copy of Windows 7 anyone know? If that's the case I'd rather hold off for another month or two before I buy my SSD.
Also I'm planning on getting a Samsung 840 Series
i have a dell laptop with Windows 7 Ultimate installed on my C:/ which is 160Gigs. I also have a 2T ext Hard drive Partitioned into, 3 Partitions,F,(500G)G(500G),H(1T),Back in 10/23/11 i had made a backup of my C:/ to my F:/ with a system image. i attempted to make a End of year backup and system image to the F:/, and the backup said i could not back up to the F:/ or G:/ ( both drives has Data on them but they also have enough free space for the backups),so i decided to use the H:/ to do the backup, the backup is including the F;/ in the backup which i do not want backed up,( because it already has a system image and a backup there already) so i manually told the backup to do the C:/ and it still wants to include the F:/ in the backup, I even reset the Windows backup to the default and tried to do a first time ( let me choose what to back up) and still it wants to include the F:/ in the backup and system image,all i would like to do is a simple backup of my C;/, why does Windows insist on including the F:/ in the backup when i explicitly tell it not to, and how would i go about doing a backup of JUST my C;/ ?,Would i have to remove the initial backup an system image from the F:/?
View 3 Replies View RelatedI have purchased a brand new laptop with an OEM Windows 7 Home Premium. On the first boot it runs that wizard asking you to select locale etc. After doing some research I see that supposedly only Win7 Ultimate will allow multiple languages which is confusing since Home Premium is allowing me to select one. My questions are...
1) If I select a language on this first time boot wizard, once it configures/installs can I change it to another selection at a later? If the answer is "No" then...
2) If I re-install fresh from the accompanying rescue CD will I then be presented with the first time boot wizard again allowing to select the locale and thus changing it there?
I haven't decided if I want to run the box in English or Japanese yet but both options are available on the first time boot screen which I find very confusing since by all accounts Ultimate is the only version that should allow this.
I was told I could create a copy of windows 7 from initial bootup when turning on my HP Pavilion dv7t notebook by either pushing f8 or f11? Can someone please tell which is the proper key and how to do it from there? I already have the dual layer disc to burn it on, but can I burn it from the cd burner in the computer or an external cd burner(I have one of those as well). This computer has not been turned on yet.
View 2 Replies View RelatedI have issues booting my desktop. It shows the initial Intel chipset screen (F10 for BIOS, F2 for boot order) and then screen turns black for 2 seconds and computer reboots back to the Intel screen. [code] Steps Performed so far:
1. I can go into BIOS but cannot boot the PC.
2. I tried reseating all memory modules and used 1 memory stick one at a time. No success. 3. Removed graphics card and connected monitor to integrated video port on mobo - no success. 4. reseated HDD connections - no success. HDD, 5. RAM are getting detected in BIOS.
6. Unable to boot to safe mode.
7. Tried reinstalling the OS using CD. Stuck at Windows is loading file. The bar moves for 5 seconds and then stops.
None of the above worked
When I press the power up button my computer will start to boot to a blank screen. My main drive is a 120gb SSD and Slave is a 1tb hdd and will not start spinning. After about 30 seconds I can hard restart the computer and press the power button again and the computer will fully boot with no indications of a crash. If I press the reset button itself it will not reset the computer unless it is fully started. Also if I put the computer into sleep mode it will do the same thing. How to get my computer to boot the first time I start up the computer.
View 2 Replies View RelatedWhen I start Windows 7 about 30 seconds after the login, I see an error message popping up that says: "Failed to initial environment". In the task bar I see the an icon that writes MFC, which is the program that gives the error message. I looked in my task manager under processes if I see MFC, but there is nothing like this. I am using Windows 7 64 bit.Does anyone have an idea what that would be?Here are 3 screen shots, which show the error and all processes running in my task manager.
View 5 Replies View RelatedWhen I start Windows 7 about 30 seconds after the login, I see an error message popping up that says: "Failed to initial environment". In the task bar I see the an icon that writes MFC, which is the program that gives the error message. I looked in my task manager under processes if I see MFC, but there is nothing like this. I am using Windows 7 64 bit.
Here are 3 screen shots, which show the error and all processes running in my task manager. [URL]
When windows7 is initially booted, I get a "hotkey" icon appearing in my taskbar. It is there for a short time and then disappears.
View 4 Replies View RelatedI just installed a new SSD and put a few programs on it. I boot windows XP from my current HDD. I also have a copy of windows 7 that has only been used once, so I was going to use another one of the installs from the disc for my computer. I wanted to put windows 7 on the new SSD, while leaving xp on the old HDD. I would then just make the SSD have boot priority, without having to worry about formatting the old HDD etc.
Well, when I put windows 7 in, and choose to boot from disc, it'll show the black screen where the loading bar goes to completion, then switches to a black screen where the colored balls form the windows logo, and finally the screen turns blue with some slight designs in the back (I believe it's the default windows 7 wallpaper). The mouse icon shows up, but that's it.
I can hear the disc stop spinning, and no additional windows pop up allowing me to complete installation and everything. I've reset all BIOS settings to default. I've tried making the SSD have boot priority over the HDD but it still freezes at the same spot. Everything I've done cause it to freeze at the same spot, actually. I've triple checked that all of my hardware is compatible with windows 7.
My Thinkpad T400 is stock on the initial boot screen.
View 3 Replies View RelatedAs of about 3 days ago my Dell Inspiron N7010 (Windows 7 Home Prem 64bit) fails to boot up. It gets to the initial Windows screen before the login screen and freezes, then sends me into Startup Repair. [code] I've tried running the diagnostics and get no error codes. I've tried restore points, memory diagnostics.. pretty much everything except factory image, with no success. I have a lot of government programs installed on this laptop, so.
View 9 Replies View Relatedone of the netbooks was plugged in to initially power it up, but then hard-shut-down before Windows could run through its initial setup.Now when I boot up the netbook, and it attempts to go through the initial windows setup "Setup is starting services", and then throws an error message: The computer restarted unexpectedly or encountered an unexpected error. Windows installation cannot proceed. To install Windows, click "OK" to restart the computer, and then restart the installation.I restart, and the cycle continues. This happens whether I try to boot normally or in safe modeI've got no CD-drive attached to it, so I'm not sure what I can do to break this error cycle.
View 6 Replies View RelatedI install Windows 7 64 bit in a 60 gb partition of my HDD (C drive). I have about 200 GB free space in D drive. Now I want to make a 60 GB partition from the free space of D drive.
View 4 Replies View RelatedI created a 20gb partition on my external hard drive and no longer require the partition. It is currently unallocated space so I want to format it into NFTS. Using computer management the partition was selected and and I went through the steps to format but i keep on getting an error message saying there is not enough space on the disk to complete this operation.
View 1 Replies View RelatedI'm a long-time reader but new poster. I am currently running Windows 7. I want to install Windows XP onto another disc and have a dual-boot setup. I keep Windows 7 up to date and secure, but for the XP partition, I would rather not have antivirus running or even installed, in order to limit background processes. I will not be logging into any place or making any credit card purchases when booted into Windows XP. It will just be used for surfing, games, etc. Further, if and when XP becomes compromised or buggy, I will simply overwrite the partition with a backup image.
If I use Bitlocker to lock down the Windows 7 partition (with the encryption key on a thumb drive) and boot into Windows XP, am I correct in thinking the XP installation see or can't access the Windows 7 partition? If XP gets compromised, can a virus access or write to the Windows 7 partition?
Is there any other reason why this would not be secure? Can a virus write to the BIOS?