Unable To Boot PC / Reboots To Initial BIOS Screen
May 15, 2012
I have issues booting my desktop. It shows the initial Intel chipset screen (F10 for BIOS, F2 for boot order) and then screen turns black for 2 seconds and computer reboots back to the Intel screen. [code] Steps Performed so far:
1. I can go into BIOS but cannot boot the PC.
2. I tried reseating all memory modules and used 1 memory stick one at a time. No success. 3. Removed graphics card and connected monitor to integrated video port on mobo - no success. 4. reseated HDD connections - no success. HDD, 5. RAM are getting detected in BIOS.
6. Unable to boot to safe mode.
7. Tried reinstalling the OS using CD. Stuck at Windows is loading file. The bar moves for 5 seconds and then stops.
None of the above worked
Windows 7 ultimate 32 bit suddenly switched off, reboot does not show on screen which reads "HDMI CHECK SIGNAL CABLE". Using ATI HD4350 fanless with heatsink connected via HDMI lead. tried another monitor using white dvi cable monitor stays blank then shows power saving mode. So that eliminates the monitor & hdmi lead. Could a duff graphics card show this error? No on board graphics. Unable to get into bios no bleeps, Windows 7 dvd no good either, all fans come on and motherboard MSI X58 on board indicator light goes from amber to green when pc turn on so m/b must be ok.
As of about 3 days ago my Dell Inspiron N7010 (Windows 7 Home Prem 64bit) fails to boot up. It gets to the initial Windows screen before the login screen and freezes, then sends me into Startup Repair. [code] I've tried running the diagnostics and get no error codes. I've tried restore points, memory diagnostics.. pretty much everything except factory image, with no success. I have a lot of government programs installed on this laptop, so.
My laptop is a Acer aspire 5738z running windows 7 home premium 64 bit and my problem is my laptop will not start. When I turn my laptop on it starts to run like normal: GPU fan starts, Disk drive kicks in, and the LED for the on button is working but nothing on the screen. I've tried too do alt + f10 for a restore, nothing happened. I've also tried to plug it into a monitor and my tv. Before this occurred it had been turned off during boot (don't ask why, I cannot answer that) and I preceded to take it apart(to fix the overheating issue due to acer not putting fan holes on the bottom of the laptop and I didn't realise something was wrong with it until I reassembled it and tried to turn it on. So I'm not sure whether is corrupt BIOS, a hardware problem, or corrupt MBR (my own personal diagnosis, don't know whether it's right or not). Also I have tried turning the laptop off taking the battery out letting the motherboard discharge then pressing the power button for a minute, leaving it for a minute, putting the charger in then turning it on.
I built a new gaming PC about a month and a half ago and its been running fine up until now. I turned it on a couple of days ago and Win 7 was freezing up. The mouse cursor was a blue wheel and I couldn't click or do anything. I couldn't even access the command line and ctrl+alt+del didn't work either. At this point it did boot up in safe mode. I powered it down and now it won't boot past BIOS. I reseated everything and checked all the connections and everything seems good.
I've just built my first PC which uses a MSI Z77A-GD65 MOBO.I burned the Windows 7 .iso file to a DVD and tried to boot it from that (I went into the BIOS and explicitly stated for the system to do so) However when I do, it produces the phrase "Reboot and Select proper boot device or insert boot media in selected boot device and press a key".The disk is brand new and clean and the LED on the optical drive flashes as if attempting to read from the disk but to no avail.I have also put the .iso file onto a flash memory stick and tried to boot it from that it says "SYSLINUX 4.03 2010-10-22 EDD Copyright (C) 1994-2919 H. Peter Anvin et al.ERROR: No configuration file found.No DEFAULT or UI configuration directive found!" then it asks me "boot:"When I type in the .iso file name, it says EDIT: "Invalid or corrupt kernel image." but I can view the .iso fine on windows explorer on my other computer.
having problems with my PC rebooting since restarting to finish the installation of the latest Windows Update. Loads only to the Dell BIOS screen and then reboots again. I can hit F2 or F12, but not sure what to do when I do. I thought that running in Safe Mode and uninstalling the last update would be the way to go, but not sure how to get into Safe Mode.
When i boot my computer up it will stop for about 15 mins on boot screen the screen that has options press delete for setup etc... stay there for around 15 or 20 mins then boot on to desktop
I have an HP Pavilion G6-1d40ca. It crashed the other day while I was using it, and when I restarted it, it went to BIOS update. It froze while updating, and died in itself (I think the battery died, it wasn't plugged in. I never knew about BIOS update, so I wasn't expecting for the battery to die during the update, so I didn't plug it in.) Second time, booted it up (it was plugged in this time), and went into BIOS update once again. All's good, was able to use the laptop for about five minutes, then it crashed once again. Now, when I boot it up, nothing comes up on the screen. No nothing. The power button is on, the wi-fi is on, the LED light is blinking non-stop, more than 6 times than what is referred to the HP website.
I tried doing the remove battery and adapter, press power button for 30 seconds, plug it in without the battery, but to no avail. I also did the whole win+B, but doesn't work either. I tried pressing f11, but nothing comes up on the screen. I don't remember where I put the recovery discs that came with the laptop. I thought I put it on the box together with recovery discs for our other computers at home, but I guess I didn't. The thing is, I don't know where to begin, since I don't have anything on the screen itself. Not even a start-up logo or something.
When I press the power up button my computer will start to boot to a blank screen. My main drive is a 120gb SSD and Slave is a 1tb hdd and will not start spinning. After about 30 seconds I can hard restart the computer and press the power button again and the computer will fully boot with no indications of a crash. If I press the reset button itself it will not reset the computer unless it is fully started. Also if I put the computer into sleep mode it will do the same thing. How to get my computer to boot the first time I start up the computer.
I was playing EVE online yesterday morning, and decided I wanted to see how far my machine could go with forced settings in the Nvidia Control Panel. It crashed after a few minutes and I thought 'Well, thats the limit. I'll turn them down to where they were.' I did, everything worked fine, and I shut the computer off.
Last night, however, I went to boot up the machine and During the initial dell loading screen (the BIOS load screen), There were wierd color glitches all over the place. After this, During the Nvidia RAID controller load screen, there were DOS charecters occuring at random intervals on the screen, interrupting the actual text (and these charecters werent normal charecters, one looked like the Delta symbol).
After Windows began to load (again, with bizarre color glitches), I would get a BSOD attributing the error to nvlddmkm.sys and it was conducting a physical memory dump. It would restart, go into system repair, wouldn't repair, and the loop would continue.
I COULD get into safe mode, however. After doing so, I tried uninstalling nvidia drivers, (and again with driver sweeper), and reinstalling. I would get a dialogue saying that Server Stereo wasn't installed properly.
Going into DXdiag told me that the machine no longer recognized the graphics card (all the fields were blank or listed as N/A under the display tab).
I decided to just go balls out and reformat using the XP disc that came with the computer. Again with the DOS charecters, which made navigating the windows setup screens a real pain (I did them by memory, mostly). As I went to bed, the reformat went, and even THAT screen was plagued by these mysterious charecters. It looked like a 1980s computer virus on my machine!
This morning, I awoke, led the windows installer process through what it needed (all the while enduring the color glitches that plagued safe mode). I left for work this morning while the Horribly designed Dell Installing Applications window was flashing. I'm currently still at work, so I can't provide super detailed explanations, but I hope someone can get me a prognosis.
Things on my list to do are:
Reinstall graphics drivers.
Reseat the Graphics Cards.
Reset CMOS.
Test cards on other machine.
If anyone's encountered this problem and a solution, please please PLEASE tell me. It would save me a great deal of stress and chain-smoking.
I'm having random crashes during general usage on my pc. Attached you will(hopefully) find bsod logs. I have run memtest already and it came back ok. I have also updated to latest nvidia drivers and it still happens.This is a nearly fresh install of windows 7 and i have loaded minimal software onto it since install a week or so ago.
I have been here, let alone worked on a PC, but this is my brothers PC and he's been going through He said its an intermittent crashing and also says hes got a bunch of junk files, so I first uninstalled all A/V programs and installed advanced system care which I use on my PCs, as well as MSE. I went thru full scans and went thru some BSODs which I couldnt read the errors.I've attached the sevenforums zip file,
SYS Specs Windows 7 ultimate x64 Intel i7 m 620 @2.67Ghz 2.66Ghz 4GB RAM Nvidia geforce gt 330 m 500GB HD
Just recently been getting a crash when the display will go black and not respond again an I have to manually turn off an on the computer or (very rarely) it will reboot. If I have music or any sound being played through the speakers at the time, the sound gets all distorted and turns into static. I have reformated and i still get the problem so I don't think it is software, I have also ran hardware checks and all the main components seem fine. I can turn it on first thing in the morning and it will run good for a few hours then crash, also I can leave it on stand by almost all day with no problem then wake it an it only takes a few minutes of browsing the net for it to crash and after that it will crash within 30min of reboot.
My PC reboots its self after windows logo I have got it to work before by doing a system restore but I would have to do it twice to get it to work. I have a mini dump which I will upload.
Problem signature: Problem Event Name:BlueScreen OS Version:6.1.7601.2.1.0.256.1 Locale ID:2057
Additional information about the problem: BCCode:124 BCP1:0000000000000000 BCP2:FFFFFA8007D327F8 BCP3:0000000000000000 BCP4:0000000000000000 OS Version:6_1_7601 Service Pack:1_0 Product:256_1
Files that describe the problem: C:WindowsMinidump - 82812-24913-01.dmp C:UsersAdminAppDataLocalTempWER-38563-0.sysdata.xml
Read our privacy statement online: [URL] If the online privacy statement is not available, please read our privacy statement offline: C:Windowssystem32en-USerofflps.txt
About week ago my computer started freezing and rebooting and then hangs at bios splash screen (will stay there with nothing happening for hours if u let it) until you reboot it than it comes back fine until it does it again. The only thing I noticed is if the machine is off for a while it takes a lot longer for it to happen, If you restart it it last around 15 -20 mins.
1) Updated all drivers and checked device manger for errors.
2) checked and defragged drive C: drive (ssd)
3) checked both for events and dmp files (nothing ) made sure reporting was on
3) Ran windows mem check froze twice while testing once with both strips and once with only one strip installed
4) replaced ram OS Windows 7 Ultimate (x64) Service Pack 1 (build 7601) MOTHERBD Gigabyte Technology Co., Ltd. P55A-UD3 PROCESSOR 2.93 gigahertz Intel Core i7 K 875 COOLING DUAL FAN H50 LIQUID CLOSED LOOP
I have recently purchased an old off-lease HP Compaq dc7700p to use as a backup desktop. I loaded Windows 7 64 onto it and everything seems to be functioning normally aside from a peculiar problem. Every time the PC restarts, it will hang on a blank black screen after POST. I have to hold down the power button for a hard reset, after which it will boot normally.
I have an Inspiron 5010 and after a Windows 7 update the screen, after the Windows 7 splash screen becomes pixelated and then reboots. I have tried to go into safe mode but it blue screens every time and quickly reboots.
Computer rebooted after 'starting windows' When starting in safe mode, it rebooted after loading classpnp.sys
This happened after I installed MSE and it detected a Trojan located in c:/windows. On hindsight deleting it was a bad idea.
I've tried using startup repair as well as sfc/scannow. I've also ttried unplugging the hard drives as well as changing the hard drive mode in the BIOS from ide to ADHCI and back.
I've been experiencing seemingly random crashes and auto-restarts of my computer that started a couple months ago. When it crashes, the video feed to my monitors stops so they go dark and say no signal and any sound that was playing begins stuttering; after about 10 seconds my computer restarts, so apparently there was a bluescreen that I could not see and the delay was windows saving the crash dump.The problem is that the crashes are completely random; well, not completely, they only occur when I'm playing a fullscreen game, never when browsing the web or watching videos. About a month ago I freshly reinstalled windows 7 on a spare hard drive; hoping the problem was somehow related to 'garbage' and a fresh install would fix it. It stopped... for a while, and then started back up again.
I did some googling recently, found that someone with a similar issue had fixed it by upgrading their drivers; did so and found several including mobo inf and related were very out of date. That was about a week ago. When Skyrim was released on the 11th I did a marathon gaming session that lasted about 30 hours (yeah, I know) with zero computer issues whatsoever.Then, yesterday afternoon I started playing Skyrim again.. and it crashed again randomly about 2 hours into my play. Crashed again about an hour later; and then this evening it crashed like 10 minutes into my play session.I don't normally ask for help with computer issues; I've always fixed them myself with assistance from googling stuff and forums that helped me figure out what to do, but this is beyond me.
I built my current system december '08, upgraded the graphics card to the current gtx 570 last december and upgraded my OS from vista to 7 a few months ago. The rest of my system info is in my system profile stuff. Brief version below:
Also, my system runs quite cool; normal cpu idle temps are 84 F and system 120 ish. I've never experienced any graphical corruption either.One other thing I just recalled. Before about november 8th, these crashes used to say they were related to:Event 18 WHEA-logger A fatal hardware error has occurred.
I have a new Alienware PC from Dell and I am trying to get to the BIOS to make a few changes. From the doc, I understand that I need to hit the F2 key when the prompt is displayed, but it never is. Nor is the prompt to boot in safe mode. If I start using the F2 key early, the system just presents a black screen and the PC seems to stop. If I am too late, it boots normally.I'm feeling that maybe behind that black screen is the BIOS but since I am using HDMI from my graphics board to the monitor, maybe there is a problem with the monitor displaying that primitive a signal.
Okay so lately I've noticed that my PC isn't displaying the BIOS splash screen anymore and skips straight to the Windows login screen.It didn't really bother me until today when I wanted to boot into Ubuntu and I couldn't select which OS I wanted to use.I'm pretty sure the problem isn't the BIOS itself since I unplugged all the peripherals except the speakers, removed all the RAM and the BIOS did beep repeatedly. And given enough time, I can boot into windows (and only windows ).Apparently people have had this problem before and all the solutions I've read such as "Press 'del' to go into your BIOS!" really doesn't help since I can't see anything in my BIOS menu.The only solution that made sense to me was that my CMOS battery could be dying. I haven't changed my rig since I built it in 2009. The only significant event that happened recently might be that Windows updated itself.
-PC doesn't display BIOS splash screen -Can't see messages displayed by system -When windows does bootup, everything runs just fine -Haven't changed rig for ~3 years
I am choosing which OS to boot by changing the boot order in my BIOS. To me, this seems clean and simple. I built 32 bit XP on one disk, then removed that disk from my system, installed a different disk, and built 64 bit Windows 7.
When both disks are installed, I change the boot order to select the OS I want, and each OS sees and can use the files on either disk.
Am I asking for trouble here, or is this as clean as I think it is? What I want is one set of user document files which can be used from whichever OS has been booted.
My wife's laptop broke down a few months ago, and we wanted to get some files off of the hard drive. I grabbed an extra eSATA cable and connected it to an extra port on my desktop motherboard... without remembering to connect it to the power supply. Anyway, when I booted up the machine, I was unable to get past the BIOS, getting an error message "Keyboard Error or No Keyboard Present". Even after shutting down and removing the hard drive, I'm still getting this error message. We've tried a number of different keyboards and it's coming up the same every time.
I have the above motherboard. I have been using a video card which is three years old and thought I would try out the integrated video before my video card died. I switched it in the Bios and switched the monitor cable and it started fine on integrated video. The only thing is that the first screen where I can enter Bios does not show, so I am unable to enter the Bios. I tried hitting the delete button on the blank screen but nothing happens. I was able to shut down the PC and switch back to the video card, so I am OK. Does anyone have any idea why the first screen doesn't show on integrated?
I find that the Windows 7 boot screen slows down the boot process on my machine. Is there a way to restore the old Vista scrolling loading bar? I know it's there as my netbook uses it.
I have tried to boot PC to the Bios by taping Delete, in the past it booted to BIOS but now won't.It poots to Windows only, keyboard is fine all keys works.I am not able to get in BIOS, I have updated Bios but nothing help me with this issue.
