I have an HP Pavilion dv3 which was built with Vista Home Premium x64 and upgraded to Windows 7 almost a year ago. I recently purchased an Iogear GBU421 (Bluetooth 2.1 Mini Adapter) and followed the instructions in the included manual. I have a laptop with a slot-loading CD drive, so I downloaded the drivers from the Iogear webpage and installed from the setup.exe. I restarted my computer and tried to turn the device on from the system tray. What happens is the icon (which looks like a tall blue hexagon with a red X through it) disappears when I select "Turn Adapter On", and nothing happens. The icon reappears 1-2 minutes later. The following Bluetooth-related services are running currently: btwdins.exe, BTTray.exe.
I already tried un- and re-installing the device driver software, without success.
SOLVED: Turns out all I needed to do was have Windows Update install new driver software from the device manager. Bluetooth now behaves normally on my Bluetooth-ready cellphone.
Remember when you installed Windows 7, there was that one setup thing that asked you for the time, your username, and password?Ok so my friend wanted me to upgrade his HP laptop to Windows 7, since he originally had the you-know-is-junk version of windows (Vista).I was able to install all of the software, but what I want to know is if there's a way to run that configuration setup thing again.
After all the trouble that I went to remove the old partitions on the HD in my secondary rig, I forgot to disconnect a second HD installed, and after going through a number of other repairs just before starting the installation, I wasn't thinking clearly and deleted the partitions that I had made with the HD installed on my primary rig.
Attempting to recreat the partitions with the installation procedure got things even more messed up because I didn't find any facility for actuallyt creating a partition of the size that I wanted, only a format function, which I assumed would format the entire drive, or as I did, click Next, hoping to find something more in the next screen, but it then just started the installation itself, and took the entire drive, except a 100MB partition that it also created for the system reserved functions.
Not being in the mood to once again remove the harddrive back to my primary rig for prep, I let it continue the installation, because it would not permit me to delete the partitions that it had made. I'm hoping that I can resize the main partition after the install completes, but if like when I installed the x32 bit version in this manner, it scattered files across the partition in a fashion that would make it difficult to do so.
On my primary rig, I have the entire OS installed on one neat 100GB partition, and that is what I want here also. I'm trying to decide whether to nuke the HD again, or finish the installation and attempt to customize it afterward. Which would be better?
When I clean installed Windows 7 it would create 3 partitions
0 byte = unallocated 100MB - reserved and 80GB (the rest) = install
Somehow, I eventually got rid of that 0 byte partition during one of my reinstalls.I thought I knew how I did it, but apparently not.I am trying to install W8 on a spare drive that I probably tried unsuccessfully to image my Windows 7 system to when it still had the 0 byte partition.
I've just built my first PC which uses a MSI Z77A-GD65 MOBO.I burned the Windows 7 .iso file to a DVD and tried to boot it from that (I went into the BIOS and explicitly stated for the system to do so) However when I do, it produces the phrase "Reboot and Select proper boot device or insert boot media in selected boot device and press a key".The disk is brand new and clean and the LED on the optical drive flashes as if attempting to read from the disk but to no avail.I have also put the .iso file onto a flash memory stick and tried to boot it from that it says "SYSLINUX 4.03 2010-10-22 EDD Copyright (C) 1994-2919 H. Peter Anvin et al.ERROR: No configuration file found.No DEFAULT or UI configuration directive found!" then it asks me "boot:"When I type in the .iso file name, it says EDIT: "Invalid or corrupt kernel image." but I can view the .iso fine on windows explorer on my other computer.
Set-up isn't finishing as the install will crash BSOD 0x0116 with atikmag.sys causing the problem.(**Note, there is NO Minidump found after this crash - I"ve lookedlooked.. and looked... so I took a digital photo of the BSOD screen in the moments it flashed)I can't complete the install using safe mode, but in safe mode I can get to the part where set-up is trying to finish.So, how can I force the install to bypass graphics card driver install and install a standard SVGA driver until I can get the thing to finish set-up??
I've seen in many threads that there isn't just one specific thing to look for, because many things can cause your system to freeze.What I'd like to know is, what steps would a profesional take to find this issue?I've ran programs looking for spyware and viruses and seem to be clean:AVGSpybotad-awareThe strange thing is that, this only happens after my computer has been off for a few hours, and in the first 5 minutes of starting it up, it freezes completely, you can't move the mouse, pull up the task manager or anything.I power it down and back up, and normally I'm fine for hours on in, its just always that initial start up
When I get the login screen, I just see the buffer LED glowing for 1 minute. Then it calms down. Then after logging in, the buffer LED keeps glowing for 5 minutes and my computer is terribly slow. If I do nothing through all this operation and just wait, all will be okay. So usually I can use my laptop after 8 minutes from turning it on.On the other hand, if i directly start opening applications before the buffer LED turns off (sometime only firefox), I directly get the bsod. Each time I get a different code for it. Why is this happening? Please find below the laptop specs and things that I have tried. [code]
New drive 1gb external, running bitlocker for the first time. Left it overnight cos it was taking forever, (which is the norm)
Woke up this morning and it was stuck on something like 47.1% requesting the bitlocker password, put that in and it starts encrypting again.... But every few random mins it falls over with an error message:
An Error Occurred The System cannot find the file specified. And prompts me to put my bitlocker password back in, for which I do, and the encrpytion starts again.
Its like at 50% now, after it falling over 3 times in the last 30mins.. I'm not exactly what to do.. I cant sit here for the next 10hrs waiting for it to fall over every few mins asking for the password.
I'd be up for scrapping the whole encrpytion and starting all over again.. But not exactly sure on how to permantely un-crypt the drive and reformat it ? Perhaps running a scandisk before doing so... It was a brand new drive.
I can actually still access the data, because autoplay opens after every error allowing me to see and open the files.
I am having a problem with my Windows 7 Pro edition when burning data to a CD-RW.When I add new data to existing data already burned on the CD-RW, the data has been written correctly to the disk, but when I view the disk after writing the new data, I never see the new data...the only data I see is the data that was written to the CD-RW at the FIRST burning. When I place my CD-RW in my other computer with Windows XP, all the data appears...initial burning and all subsequent burnings; place it in my Windows 7 CD drive and NO secondary data is showing.In one program I have for burning, I actually get a dialog box saying "the data has been written correctly to the disk, but the number of files does not match the expected file count. Most likely, the file system structure has not been written correctly and some files will not appear on the disk." What is going on with this "file system structure has not been written correctly?"This is a new wrinkle in the sheet for me. I have 5 CD/DVD read/write drives, and they all work the same...only initial files show and other files are not visible when re-burning to a CD-RW. It is really a new Agatha Christie mystery to me.
I currently have 2 physical systems.I am trying to migrate over to the new system which has new hardware etc...Currently my existing system is running absolutely fine. WS2008R2 EE 64bit with all updates. The drives are SATA (there are physical disks on the system and none of them are RAID)my new system is using an Asus p6x58D-E mobo and has 1 SSD SATA as a bootable drive. I also have 3 other phyiscal disks on this system and one of them is a RAID0 (2x2TB non bootable).after 3 days and nights of clean installation (as I thought I was doing something unsupported... I install Windows on the SSD I create the RAID0 system on the 2x2TB HDD I install the drivers (chipset, graphics, mobo and SATA/RAID). I then do Windows update.it finds 92 updates + 1 update for the onboard LAN.I install them but in the end it fails to install saying that there were installations in progress and should reboot to complete the updates.So I reboot and it gets into Windows doing some configuring, and then it restarts again. Then it just says:"Stage 3 of 3. Preparing to configure Windows. Do not turn off your computer And the progress is just going round and round. The system is not locked or anything. the new system has an i7 core Extreme 990x 3.46GHz gulftown CPU. right now, its just there... "configuring".
I've been wanting to upgrade to getting an SSD and I was just wanting to know does anyone know if you're able to install a copy of Windows twice if it's from an OEM copy? I bought an OEM off of Newegg and the only thing I thought was different was that it didn't come with a manual and other things that really aren't necessary, but I heard somewhere that you aren't able to use OEMs for doing a OS wipe and reinstalling and it's just a one time thing.
Will I have to also buy another copy of Windows 7 anyone know? If that's the case I'd rather hold off for another month or two before I buy my SSD.
I'm having trouble with my very new computer (Lenovo Y480 with Windows 7 Home Premium 64 bit), which I've narrowed down to the following sequence:
1. I restored computer to original factory settings (to rule out possible causes)
2. I ran msconfig, and checked the boxes 'Safe Mode' and 'Networking.' I got the following error message:"System configuration cannot save the original boot configuration for later restoration. Boot changes will be reverted. The system cannot find the file specified"
3. The default boot option disappeared from the boot menu (Windows 7, default OS, current OS).
4. When I restarted my computer, it would not boot and gave me the error 0xc00034, stating that the file BootBCD was missing.
I did not do anything else with my computer after restoring the factory settings, and I did not connect to the internet. I originally encountered the problem when I wanted to try installing Windows updates in safe mode after some of the installations failed. I have replicated the error several times, including after successfully installing all Windows updates.
i have a dell laptop with Windows 7 Ultimate installed on my C:/ which is 160Gigs. I also have a 2T ext Hard drive Partitioned into, 3 Partitions,F,(500G)G(500G),H(1T),Back in 10/23/11 i had made a backup of my C:/ to my F:/ with a system image. i attempted to make a End of year backup and system image to the F:/, and the backup said i could not back up to the F:/ or G:/ ( both drives has Data on them but they also have enough free space for the backups),so i decided to use the H:/ to do the backup, the backup is including the F;/ in the backup which i do not want backed up,( because it already has a system image and a backup there already) so i manually told the backup to do the C:/ and it still wants to include the F:/ in the backup, I even reset the Windows backup to the default and tried to do a first time ( let me choose what to back up) and still it wants to include the F:/ in the backup and system image,all i would like to do is a simple backup of my C;/, why does Windows insist on including the F:/ in the backup when i explicitly tell it not to, and how would i go about doing a backup of JUST my C;/ ?,Would i have to remove the initial backup an system image from the F:/?
I have purchased a brand new laptop with an OEM Windows 7 Home Premium. On the first boot it runs that wizard asking you to select locale etc. After doing some research I see that supposedly only Win7 Ultimate will allow multiple languages which is confusing since Home Premium is allowing me to select one. My questions are...
1) If I select a language on this first time boot wizard, once it configures/installs can I change it to another selection at a later? If the answer is "No" then... 2) If I re-install fresh from the accompanying rescue CD will I then be presented with the first time boot wizard again allowing to select the locale and thus changing it there?
I haven't decided if I want to run the box in English or Japanese yet but both options are available on the first time boot screen which I find very confusing since by all accounts Ultimate is the only version that should allow this.
I was told I could create a copy of windows 7 from initial bootup when turning on my HP Pavilion dv7t notebook by either pushing f8 or f11? Can someone please tell which is the proper key and how to do it from there? I already have the dual layer disc to burn it on, but can I burn it from the cd burner in the computer or an external cd burner(I have one of those as well). This computer has not been turned on yet.
I have issues booting my desktop. It shows the initial Intel chipset screen (F10 for BIOS, F2 for boot order) and then screen turns black for 2 seconds and computer reboots back to the Intel screen. [code] Steps Performed so far:
1. I can go into BIOS but cannot boot the PC. 2. I tried reseating all memory modules and used 1 memory stick one at a time. No success. 3. Removed graphics card and connected monitor to integrated video port on mobo - no success. 4. reseated HDD connections - no success. HDD, 5. RAM are getting detected in BIOS. 6. Unable to boot to safe mode. 7. Tried reinstalling the OS using CD. Stuck at Windows is loading file. The bar moves for 5 seconds and then stops. None of the above worked
When I press the power up button my computer will start to boot to a blank screen. My main drive is a 120gb SSD and Slave is a 1tb hdd and will not start spinning. After about 30 seconds I can hard restart the computer and press the power button again and the computer will fully boot with no indications of a crash. If I press the reset button itself it will not reset the computer unless it is fully started. Also if I put the computer into sleep mode it will do the same thing. How to get my computer to boot the first time I start up the computer.
When I start Windows 7 about 30 seconds after the login, I see an error message popping up that says: "Failed to initial environment". In the task bar I see the an icon that writes MFC, which is the program that gives the error message. I looked in my task manager under processes if I see MFC, but there is nothing like this. I am using Windows 7 64 bit.Does anyone have an idea what that would be?Here are 3 screen shots, which show the error and all processes running in my task manager.
When I start Windows 7 about 30 seconds after the login, I see an error message popping up that says: "Failed to initial environment". In the task bar I see the an icon that writes MFC, which is the program that gives the error message. I looked in my task manager under processes if I see MFC, but there is nothing like this. I am using Windows 7 64 bit.
Here are 3 screen shots, which show the error and all processes running in my task manager. [URL]
I just installed a new SSD and put a few programs on it. I boot windows XP from my current HDD. I also have a copy of windows 7 that has only been used once, so I was going to use another one of the installs from the disc for my computer. I wanted to put windows 7 on the new SSD, while leaving xp on the old HDD. I would then just make the SSD have boot priority, without having to worry about formatting the old HDD etc.
Well, when I put windows 7 in, and choose to boot from disc, it'll show the black screen where the loading bar goes to completion, then switches to a black screen where the colored balls form the windows logo, and finally the screen turns blue with some slight designs in the back (I believe it's the default windows 7 wallpaper). The mouse icon shows up, but that's it.
I can hear the disc stop spinning, and no additional windows pop up allowing me to complete installation and everything. I've reset all BIOS settings to default. I've tried making the SSD have boot priority over the HDD but it still freezes at the same spot. Everything I've done cause it to freeze at the same spot, actually. I've triple checked that all of my hardware is compatible with windows 7.
As of about 3 days ago my Dell Inspiron N7010 (Windows 7 Home Prem 64bit) fails to boot up. It gets to the initial Windows screen before the login screen and freezes, then sends me into Startup Repair. [code] I've tried running the diagnostics and get no error codes. I've tried restore points, memory diagnostics.. pretty much everything except factory image, with no success. I have a lot of government programs installed on this laptop, so.
one of the netbooks was plugged in to initially power it up, but then hard-shut-down before Windows could run through its initial setup.Now when I boot up the netbook, and it attempts to go through the initial windows setup "Setup is starting services", and then throws an error message: The computer restarted unexpectedly or encountered an unexpected error. Windows installation cannot proceed. To install Windows, click "OK" to restart the computer, and then restart the installation.I restart, and the cycle continues. This happens whether I try to boot normally or in safe modeI've got no CD-drive attached to it, so I'm not sure what I can do to break this error cycle.
Does anyone knows whether the Acer Aspire 5253-BZ661 laptop has a built-in bluetooth device in it? Reading from articles on the internet, I don't see any information regarding this laptop's particular model having a built-in bluetooth device in it but has a bluetooth driver and suite ready for the download at the acer main site.
I installed TurboTax using a cd - it installed okay, but when I tried to launch I got this message:I connected with TurboTax support and they walked me through downloading the software from their website. Again when I tried to launch, I got the same message.I then installed the software on my Windows Vista laptop using the cd - it installed perfectly and launched without a problem.
I stayed at a hotel this weekend in Nashville and used the hotel's internet connection. While at the hotel, they had a welcome page that said, "Welcome to Nashville" where you would agree to the terms and conditions before browsing the Internet.Now that I am back home, whenever I initially launch IE9, the first tab that comes up has a title of "Welcome to Nashville"It sits there for 20-30 seconds, presumably searching for the hotel proxy. Then, it gives up and Google--which is my normal home page--launches normally. From that point forward, everything works fine until the next time I open my browser.I've already checked my proxy settings, and there was nothing added there. No errors appear whatsoever, just that initial tab name.
I am running a StudioXPS 1640 on Windows 7 Professional 64bit. The computer had a BSOD after I attempted to end the Steam process. Since then, the BIOS boot splash will come up but occasionally hang there. When it does not hang, windows will not start. I tried boot from both the install and recovery disks, but after loading the windows files all I get is a blank black screen. after about 10 minutes a mouse cursor shows up and can be moved but nothing else happens. Tried right-clicking and nothing happened. Also cannot access task manager
