WS2008R2 Initial Update Hangs?

Jul 1, 2011

I currently have 2 physical systems.I am trying to migrate over to the new system which has new hardware etc...Currently my existing system is running absolutely fine. WS2008R2 EE 64bit with all updates. The drives are SATA (there are physical disks on the system and none of them are RAID)my new system is using an Asus p6x58D-E mobo and has 1 SSD SATA as a bootable drive. I also have 3 other phyiscal disks on this system and one of them is a RAID0 (2x2TB non bootable).after 3 days and nights of clean installation (as I thought I was doing something unsupported... I install Windows on the SSD I create the RAID0 system on the 2x2TB HDD I install the drivers (chipset, graphics, mobo and SATA/RAID). I then do Windows update.it finds 92 updates + 1 update for the onboard LAN.I install them but in the end it fails to install saying that there were installations in progress and should reboot to complete the updates.So I reboot and it gets into Windows doing some configuring, and then it restarts again. Then it just says:"Stage 3 of 3. Preparing to configure Windows. Do not turn off your computer And the progress is just going round and round. The system is not locked or anything. the new system has an i7 core Extreme 990x 3.46GHz gulftown CPU. right now, its just there... "configuring".

View 6 Replies


ADVERTISEMENT

Computer Hangs And Crashes After Update

Jul 9, 2011

I have just installed a new hard drive to my computer as well as a fresh install of Windows 7,to my surprise after updating everything and installing programs, my computer suddenly hangs and crashes, after time this developed into BSOD,which now constantly happens. Not entirely sure why, whether it's a driver issue or what. If anyone can look into this and help my problem then.

View 4 Replies View Related

Windows 7 Hangs At Welcome Screen After Update?

Jan 12, 2013

I have a problem with Windows 7. I restarted the computer to finish installing updates, and when the welcome screen came up, the computer gets stuck there. I tried restarting the computer again, and it did the same thing. This started happening after installing updates. Safe mode works fine so I don't know what to do.

View 1 Replies View Related

When Shut Down Later, The Update Tries To Install And The Installation Hangs?

Mar 3, 2012

1) Download Cumulative Security Update for Internet Explorer 8 for Windows 7 (KB2647516)
2) PC crashes while making a restore point.3) Reboot - normal startup. But when I shut down later, the update tries to install and the installation hangs. After disc activity ceases, I shut down manually.4) Reboot - normal startup.At this point, I decided to use System Restore to clean out any residue from the failed install before downloading the patch again. Yup, you guessed it, I used the damaged restore point. D'oh!5) PC reboots as part of restore process - I get a startup error.6) Scan for problems - attempt repair - recieve the following error. "StartRep.exe Application Error. The instruction at 0x75bc9a45 referenced memory at 0x538e0e85. The memory could not be read"7) I try to restore to an earlier point, but the restore fails."System Restore failed while mounting the registry from the restore point. Unspecified error (0x80070020)"8) I close System Restore window and PC reboots automatically - normal startup.9) I recieve a notification from "Solve PC Issues" in the taskbar saying Microsoft Security Essentials is out of date and would I like to update?

So here I am. My PC appears to be running smoothly, but I don't know if there's any hidden damage in the system. I still want to clear out any residue from the failed install before I download the patch again, but now I'm wary of using System Restore. Also, the MSE update notification has me puzzled - the last restore point I tried to restore to preceeded an MSE definitions update, but that restore failed (didn't it?) and anyway, I don't normally recieve definitions update notifications from "Solve PC Issues". This las left me unsure where my system is at restore point-wise right now.

View 2 Replies View Related

System Hangs After Installations Like Windows 7 Update

Jul 29, 2012

System hangs after installations like Windows 7 update,tune up utilities,new hardwares(data cards) etc which requires windows restart.windows hangs and blue screen appears after several minutes.Pls help. [code]

View 9 Replies View Related

Computer Hangs On Bootup After Critical Update

Sep 14, 2012

My windows 7 computer hung when i started it the other day. The startup repair did not work after several attempts. I tried to choose an old restore point and it gave me a message "you must enable protection on this drive" Problem was, it did not allow me to check the drive box or give any option to enable protection....So, i started a system restore of the software, keeping data intact. It did its thing and presented a message "setup could not install windows on this systems hardware" It then reboots and comes back with " windows could not complete the installation. To install windows on this computer, restart the installation." It just keeps rebooting and returning this message....i cannot restart the installation.... the only other info i got was after the initial startup repair it said this :

System disk=devicehardisk0
windows directory = d:windows
autock = 0
number of root causes = 1

this all happend after a critical windows update by the way....

View 3 Replies View Related

Update Interrupted, Restart Hangs On 'Preparing Desktop'?

Jan 15, 2013

The system started an update and in spite of the warning not to turn the computer off, the update got interrupted.The restart has been 'Preparing Your Desktop' for about 2 hours with no diagnostics or any indicators.

View 1 Replies View Related

Slow Startup / Shutdown - No Auto Refresh And Update Hangs

Oct 3, 2010

I just installed a retail copy of win 7 on my laptop and have been experiencing some issues. At first everything worked fine but out of the blue my desktop/folders have not been auto-refreshing. Whenever I try to delete or create a new folder I have to manually refresh to the folder in order to view it. When shutting down my laptop it takes 5+ minutes and when my desktop is loading after booting up the laptop it takes several minutes for everything to load and for the win 7 chime.

Finally, it won't allow me to update. When I try to use the windows updater it hangs for a while on "creating restoring point" (which may be normal) but then permanently hangs on installing update 1/16 at 0%. If I try canceling the update nothing happens and even when I try to shut down the laptop it attempts to install the updates but hangs on update 1/16.

From researching these issues I've realized that the auto-refresh problem is not uncommon and has something to do with a network. This may be unrelated but these problems only started to occur when I was transferring pictures via a USB stick.

View 1 Replies View Related

System Hangs On Shut Down After Power Loss During Update Installation?

Sep 18, 2011

I had a power loss while installing a windows update about two months ago. Ever since then my system will hang either on logging off or shutting down.I have tried making a new user (No Help)it hangs in safe mode also.I also do not have a list of prior updates in control panel since this problem.The system works fine other than that.

View 1 Replies View Related

Run The Initial Setup Again?

Apr 13, 2011

Remember when you installed Windows 7, there was that one setup thing that asked you for the time, your username, and password?Ok so my friend wanted me to upgrade his HP laptop to Windows 7, since he originally had the you-know-is-junk version of windows (Vista).I was able to install all of the software, but what I want to know is if there's a way to run that configuration setup thing again.

View 1 Replies View Related

Initial Partitioning

Dec 26, 2009

After all the trouble that I went to remove the old partitions on the HD in my secondary rig, I forgot to disconnect a second HD installed, and after going through a number of other repairs just before starting the installation, I wasn't thinking clearly and deleted the partitions that I had made with the HD installed on my primary rig.

Attempting to recreat the partitions with the installation procedure got things even more messed up because I didn't find any facility for actuallyt creating a partition of the size that I wanted, only a format function, which I assumed would format the entire drive, or as I did, click Next, hoping to find something more in the next screen, but it then just started the installation itself, and took the entire drive, except a 100MB partition that it also created for the system reserved functions.

Not being in the mood to once again remove the harddrive back to my primary rig for prep, I let it continue the installation, because it would not permit me to delete the partitions that it had made. I'm hoping that I can resize the main partition after the install completes, but if like when I installed the x32 bit version in this manner, it scattered files across the partition in a fashion that would make it difficult to do so.

On my primary rig, I have the entire OS installed on one neat 100GB partition, and that is what I want here also. I'm trying to decide whether to nuke the HD again, or finish the installation and attempt to customize it afterward. Which would be better?

View 2 Replies View Related

Forcing Initial Configuration To Run Again?

Apr 13, 2011

Remember when you installed Windows 7, there was that one setup thing that asked you for the time, your username, and password?

Ok so my friend wanted me to upgrade his HP laptop to Windows 7, since he originally had the you-know-is-junk version of windows (Vista).

I was able to install all of the software, but what I want to know is if there's a way to run that configuration setup thing again.

View 1 Replies View Related

Initial 0 Byte Partition

Mar 3, 2012

When I clean installed Windows 7 it would create 3 partitions

0 byte = unallocated
100MB - reserved
and 80GB (the rest) = install

Somehow, I eventually got rid of that 0 byte partition during one of my reinstalls.I thought I knew how I did it, but apparently not.I am trying to install W8 on a spare drive that I probably tried unsuccessfully to image my Windows 7 system to when it still had the 0 byte partition.

View 2 Replies View Related

Trying To Get Initial Windows 7 Boot

Oct 16, 2012

I've just built my first PC which uses a MSI Z77A-GD65 MOBO.I burned the Windows 7 .iso file to a DVD and tried to boot it from that (I went into the BIOS and explicitly stated for the system to do so) However when I do, it produces the phrase "Reboot and Select proper boot device or insert boot media in selected boot device and press a key".The disk is brand new and clean and the LED on the optical drive flashes as if attempting to read from the disk but to no avail.I have also put the .iso file onto a flash memory stick and tried to boot it from that it says "SYSLINUX 4.03 2010-10-22 EDD Copyright (C) 1994-2919 H. Peter Anvin et al.ERROR: No configuration file found.No DEFAULT or UI configuration directive found!" then it asks me "boot:"When I type in the .iso file name, it says EDIT: "Invalid or corrupt kernel image." but I can view the .iso fine on windows explorer on my other computer.

View 6 Replies View Related

Windows Not Loading After Update, Hangs On "Loading Operating System."

May 1, 2012

During a recent windows update my pc froze, (mid-update) and I restarted my machine. Now windows gets stuck at the black" Loading operating system..."screen. After a long wait it will eventually display boot from cd/. When I boot from my windows dvd my os is not shown in system recovery. I Have also tried running start up repair from recovery with no luck.

View 7 Replies View Related

Crash On Initial Setup - Windows 7 X64?

May 23, 2010

Set-up isn't finishing as the install will crash BSOD 0x0116 with atikmag.sys causing the problem.(**Note, there is NO Minidump found after this crash - I"ve lookedlooked.. and looked... so I took a digital photo of the BSOD screen in the moments it flashed)I can't complete the install using safe mode, but in safe mode I can get to the part where set-up is trying to finish.So, how can I force the install to bypass graphics card driver install and install a standard SVGA driver until I can get the thing to finish set-up??

View 6 Replies View Related

Computer Freezes Only Upon Initial Start Up?

Apr 3, 2012

I've seen in many threads that there isn't just one specific thing to look for, because many things can cause your system to freeze.What I'd like to know is, what steps would a profesional take to find this issue?I've ran programs looking for spyware and viruses and seem to be clean:AVGSpybotad-awareThe strange thing is that, this only happens after my computer has been off for a few hours, and in the first 5 minutes of starting it up, it freezes completely, you can't move the mouse, pull up the task manager or anything.I power it down and back up, and normally I'm fine for hours on in, its just always that initial start up

View 3 Replies View Related

BSOD Happens On Initial Loading Of Windows 7 Pro 64 Bit

Nov 19, 2011

When I get the login screen, I just see the buffer LED glowing for 1 minute. Then it calms down. Then after logging in, the buffer LED keeps glowing for 5 minutes and my computer is terribly slow. If I do nothing through all this operation and just wait, all will be okay. So usually I can use my laptop after 8 minutes from turning it on.On the other hand, if i directly start opening applications before the buffer LED turns off (sometime only firefox), I directly get the bsod. Each time I get a different code for it. Why is this happening? Please find below the laptop specs and things that I have tried. [code]

View 1 Replies View Related

Bitlocker Crashing During Initial Encryption

Sep 15, 2012

New drive 1gb external, running bitlocker for the first time. Left it overnight cos it was taking forever, (which is the norm)

Woke up this morning and it was stuck on something like 47.1% requesting the bitlocker password, put that in and it starts encrypting again.... But every few random mins it falls over with an error message:

An Error Occurred The System cannot find the file specified. And prompts me to put my bitlocker password back in, for which I do, and the encrpytion starts again.

Its like at 50% now, after it falling over 3 times in the last 30mins.. I'm not exactly what to do.. I cant sit here for the next 10hrs waiting for it to fall over every few mins asking for the password.

I'd be up for scrapping the whole encrpytion and starting all over again.. But not exactly sure on how to permantely un-crypt the drive and reformat it ? Perhaps running a scandisk before doing so... It was a brand new drive.

I can actually still access the data, because autoplay opens after every error allowing me to see and open the files.

View 4 Replies View Related

Files On CD-RW Not Showing After Initial Burn?

Sep 23, 2010

I am having a problem with my Windows 7 Pro edition when burning data to a CD-RW.When I add new data to existing data already burned on the CD-RW, the data has been written correctly to the disk, but when I view the disk after writing the new data, I never see the new data...the only data I see is the data that was written to the CD-RW at the FIRST burning. When I place my CD-RW in my other computer with Windows XP, all the data appears...initial burning and all subsequent burnings; place it in my Windows 7 CD drive and NO secondary data is showing.In one program I have for burning, I actually get a dialog box saying "the data has been written correctly to the disk, but the number of files does not match the expected file count. Most likely, the file system structure has not been written correctly and some files will not appear on the disk." What is going on with this "file system structure has not been written correctly?"This is a new wrinkle in the sheet for me. I have 5 CD/DVD read/write drives, and they all work the same...only initial files show and other files are not visible when re-burning to a CD-RW. It is really a new Agatha Christie mystery to me.

View 2 Replies View Related

Bluetooth Initial Configuration Will Not Launch

Apr 12, 2011

I have an HP Pavilion dv3 which was built with Vista Home Premium x64 and upgraded to Windows 7 almost a year ago. I recently purchased an Iogear GBU421 (Bluetooth 2.1 Mini Adapter) and followed the instructions in the included manual. I have a laptop with a slot-loading CD drive, so I downloaded the drivers from the Iogear webpage and installed from the setup.exe. I restarted my computer and tried to turn the device on from the system tray. What happens is the icon (which looks like a tall blue hexagon with a red X through it) disappears when I select "Turn Adapter On", and nothing happens. The icon reappears 1-2 minutes later. The following Bluetooth-related services are running currently: btwdins.exe, BTTray.exe.

I already tried un- and re-installing the device driver software, without success.

SOLVED: Turns out all I needed to do was have Windows Update install new driver software from the device manager. Bluetooth now behaves normally on my Bluetooth-ready cellphone.

View 5 Replies View Related

Use A Windows 7 OEM Copy After The Initial Install?

Jan 10, 2013

I've been wanting to upgrade to getting an SSD and I was just wanting to know does anyone know if you're able to install a copy of Windows twice if it's from an OEM copy? I bought an OEM off of Newegg and the only thing I thought was different was that it didn't come with a manual and other things that really aren't necessary, but I heard somewhere that you aren't able to use OEMs for doing a OS wipe and reinstalling and it's just a one time thing.

Will I have to also buy another copy of Windows 7 anyone know? If that's the case I'd rather hold off for another month or two before I buy my SSD.

Also I'm planning on getting a Samsung 840 Series

View 4 Replies View Related

Would Have To Remove Initial Backup An System Image

Dec 19, 2011

i have a dell laptop with Windows 7 Ultimate installed on my C:/ which is 160Gigs. I also have a 2T ext Hard drive Partitioned into, 3 Partitions,F,(500G)G(500G),H(1T),Back in 10/23/11 i had made a backup of my C:/ to my F:/ with a system image. i attempted to make a End of year backup and system image to the F:/, and the backup said i could not back up to the F:/ or G:/ ( both drives has Data on them but they also have enough free space for the backups),so i decided to use the H:/ to do the backup, the backup is including the F;/ in the backup which i do not want backed up,( because it already has a system image and a backup there already) so i manually told the backup to do the C:/ and it still wants to include the F:/ in the backup, I even reset the Windows backup to the default and tried to do a first time ( let me choose what to back up) and still it wants to include the F:/ in the backup and system image,all i would like to do is a simple backup of my C;/, why does Windows insist on including the F:/ in the backup when i explicitly tell it not to, and how would i go about doing a backup of JUST my C;/ ?,Would i have to remove the initial backup an system image from the F:/?

View 3 Replies View Related

Once Initial Language Selected On Install - Can It Be Changed Later?

Jan 27, 2012

I have purchased a brand new laptop with an OEM Windows 7 Home Premium. On the first boot it runs that wizard asking you to select locale etc. After doing some research I see that supposedly only Win7 Ultimate will allow multiple languages which is confusing since Home Premium is allowing me to select one. My questions are...

1) If I select a language on this first time boot wizard, once it configures/installs can I change it to another selection at a later? If the answer is "No" then...
2) If I re-install fresh from the accompanying rescue CD will I then be presented with the first time boot wizard again allowing to select the locale and thus changing it there?

I haven't decided if I want to run the box in English or Japanese yet but both options are available on the first time boot screen which I find very confusing since by all accounts Ultimate is the only version that should allow this.

View 1 Replies View Related

Creating A Copy Of Win7 From Initial Bootup

Dec 21, 2009

I was told I could create a copy of windows 7 from initial bootup when turning on my HP Pavilion dv7t notebook by either pushing f8 or f11? Can someone please tell which is the proper key and how to do it from there? I already have the dual layer disc to burn it on, but can I burn it from the cd burner in the computer or an external cd burner(I have one of those as well). This computer has not been turned on yet.

View 2 Replies View Related

Unable To Boot PC / Reboots To Initial BIOS Screen

May 15, 2012

I have issues booting my desktop. It shows the initial Intel chipset screen (F10 for BIOS, F2 for boot order) and then screen turns black for 2 seconds and computer reboots back to the Intel screen. [code] Steps Performed so far:

1. I can go into BIOS but cannot boot the PC.
2. I tried reseating all memory modules and used 1 memory stick one at a time. No success. 3. Removed graphics card and connected monitor to integrated video port on mobo - no success. 4. reseated HDD connections - no success. HDD, 5. RAM are getting detected in BIOS.
6. Unable to boot to safe mode.
7. Tried reinstalling the OS using CD. Stuck at Windows is loading file. The bar moves for 5 seconds and then stops.
None of the above worked

View 6 Replies View Related

Computer Will Not Boot On Initial Startup - No Indications Of Crash

Apr 10, 2011

When I press the power up button my computer will start to boot to a blank screen. My main drive is a 120gb SSD and Slave is a 1tb hdd and will not start spinning. After about 30 seconds I can hard restart the computer and press the power button again and the computer will fully boot with no indications of a crash. If I press the reset button itself it will not reset the computer unless it is fully started. Also if I put the computer into sleep mode it will do the same thing. How to get my computer to boot the first time I start up the computer.

View 2 Replies View Related

Windows 7 Startup Error Failure To Initial Environment (MFC)?

May 18, 2012

When I start Windows 7 about 30 seconds after the login, I see an error message popping up that says: "Failed to initial environment". In the task bar I see the an icon that writes MFC, which is the program that gives the error message. I looked in my task manager under processes if I see MFC, but there is nothing like this. I am using Windows 7 64 bit.Does anyone have an idea what that would be?Here are 3 screen shots, which show the error and all processes running in my task manager.

View 5 Replies View Related

Windows 7 Startup Error Failure To Initial Environment (MFC)

May 18, 2012

When I start Windows 7 about 30 seconds after the login, I see an error message popping up that says: "Failed to initial environment". In the task bar I see the an icon that writes MFC, which is the program that gives the error message. I looked in my task manager under processes if I see MFC, but there is nothing like this. I am using Windows 7 64 bit.

Here are 3 screen shots, which show the error and all processes running in my task manager. [URL]

View 2 Replies View Related

Hotkey Temporary Appearance In Taskbar On Initial Booting?

Aug 11, 2012

When windows7 is initially booted, I get a "hotkey" icon appearing in my taskbar. It is there for a short time and then disappears.

View 4 Replies View Related

Windows 7 Freezes During Installation Just Past Initial Logo

Dec 30, 2010

I just installed a new SSD and put a few programs on it. I boot windows XP from my current HDD. I also have a copy of windows 7 that has only been used once, so I was going to use another one of the installs from the disc for my computer. I wanted to put windows 7 on the new SSD, while leaving xp on the old HDD. I would then just make the SSD have boot priority, without having to worry about formatting the old HDD etc.

Well, when I put windows 7 in, and choose to boot from disc, it'll show the black screen where the loading bar goes to completion, then switches to a black screen where the colored balls form the windows logo, and finally the screen turns blue with some slight designs in the back (I believe it's the default windows 7 wallpaper). The mouse icon shows up, but that's it.

I can hear the disc stop spinning, and no additional windows pop up allowing me to complete installation and everything. I've reset all BIOS settings to default. I've tried making the SSD have boot priority over the HDD but it still freezes at the same spot. Everything I've done cause it to freeze at the same spot, actually. I've triple checked that all of my hardware is compatible with windows 7.

View 6 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved