I have a problem with Windows 7. I restarted the computer to finish installing updates, and when the welcome screen came up, the computer gets stuck there. I tried restarting the computer again, and it did the same thing. This started happening after installing updates. Safe mode works fine so I don't know what to do.
View 1 Replies
System hangs after installations like Windows 7 update,tune up utilities,new hardwares(data cards) etc which requires windows restart.windows hangs and blue screen appears after several minutes.Pls help. [code]
View 9 Replies View RelatedThe update is called:
nvidia - Graphics adapter WDDM1.1, Graphics Adapter WDDM1.2, Other hardware - NVIDIA GeForce GT 425M.
After installing it, whenever my laptop tries to use the Nvidia card, I get a blue screen and the system restarts. I looked in installed updates to uninstall it, and it is not there. I did a system restore to four days before I installed it, and I still get the same effect. Lastly, I installed some older nvidia drivers that used to work using the clean install option, and I still have this problem.
I have just installed a new hard drive to my computer as well as a fresh install of Windows 7,to my surprise after updating everything and installing programs, my computer suddenly hangs and crashes, after time this developed into BSOD,which now constantly happens. Not entirely sure why, whether it's a driver issue or what. If anyone can look into this and help my problem then.
View 4 Replies View RelatedI currently have 2 physical systems.I am trying to migrate over to the new system which has new hardware etc...Currently my existing system is running absolutely fine. WS2008R2 EE 64bit with all updates. The drives are SATA (there are physical disks on the system and none of them are RAID)my new system is using an Asus p6x58D-E mobo and has 1 SSD SATA as a bootable drive. I also have 3 other phyiscal disks on this system and one of them is a RAID0 (2x2TB non bootable).after 3 days and nights of clean installation (as I thought I was doing something unsupported... I install Windows on the SSD I create the RAID0 system on the 2x2TB HDD I install the drivers (chipset, graphics, mobo and SATA/RAID). I then do Windows update.it finds 92 updates + 1 update for the onboard LAN.I install them but in the end it fails to install saying that there were installations in progress and should reboot to complete the updates.So I reboot and it gets into Windows doing some configuring, and then it restarts again. Then it just says:"Stage 3 of 3. Preparing to configure Windows. Do not turn off your computer And the progress is just going round and round. The system is not locked or anything. the new system has an i7 core Extreme 990x 3.46GHz gulftown CPU. right now, its just there... "configuring".
View 6 Replies View Related1) Download Cumulative Security Update for Internet Explorer 8 for Windows 7 (KB2647516)
2) PC crashes while making a restore point.3) Reboot - normal startup. But when I shut down later, the update tries to install and the installation hangs. After disc activity ceases, I shut down manually.4) Reboot - normal startup.At this point, I decided to use System Restore to clean out any residue from the failed install before downloading the patch again. Yup, you guessed it, I used the damaged restore point. D'oh!5) PC reboots as part of restore process - I get a startup error.6) Scan for problems - attempt repair - recieve the following error. "StartRep.exe Application Error. The instruction at 0x75bc9a45 referenced memory at 0x538e0e85. The memory could not be read"7) I try to restore to an earlier point, but the restore fails."System Restore failed while mounting the registry from the restore point. Unspecified error (0x80070020)"8) I close System Restore window and PC reboots automatically - normal startup.9) I recieve a notification from "Solve PC Issues" in the taskbar saying Microsoft Security Essentials is out of date and would I like to update?
So here I am. My PC appears to be running smoothly, but I don't know if there's any hidden damage in the system. I still want to clear out any residue from the failed install before I download the patch again, but now I'm wary of using System Restore. Also, the MSE update notification has me puzzled - the last restore point I tried to restore to preceeded an MSE definitions update, but that restore failed (didn't it?) and anyway, I don't normally recieve definitions update notifications from "Solve PC Issues". This las left me unsure where my system is at restore point-wise right now.
My windows 7 computer hung when i started it the other day. The startup repair did not work after several attempts. I tried to choose an old restore point and it gave me a message "you must enable protection on this drive" Problem was, it did not allow me to check the drive box or give any option to enable protection....So, i started a system restore of the software, keeping data intact. It did its thing and presented a message "setup could not install windows on this systems hardware" It then reboots and comes back with " windows could not complete the installation. To install windows on this computer, restart the installation." It just keeps rebooting and returning this message....i cannot restart the installation.... the only other info i got was after the initial startup repair it said this :
System disk=devicehardisk0
windows directory = d:windows
autock = 0
number of root causes = 1
this all happend after a critical windows update by the way....
The system started an update and in spite of the warning not to turn the computer off, the update got interrupted.The restart has been 'Preparing Your Desktop' for about 2 hours with no diagnostics or any indicators.
View 1 Replies View RelatedI just installed a retail copy of win 7 on my laptop and have been experiencing some issues. At first everything worked fine but out of the blue my desktop/folders have not been auto-refreshing. Whenever I try to delete or create a new folder I have to manually refresh to the folder in order to view it. When shutting down my laptop it takes 5+ minutes and when my desktop is loading after booting up the laptop it takes several minutes for everything to load and for the win 7 chime.
Finally, it won't allow me to update. When I try to use the windows updater it hangs for a while on "creating restoring point" (which may be normal) but then permanently hangs on installing update 1/16 at 0%. If I try canceling the update nothing happens and even when I try to shut down the laptop it attempts to install the updates but hangs on update 1/16.
From researching these issues I've realized that the auto-refresh problem is not uncommon and has something to do with a network. This may be unrelated but these problems only started to occur when I was transferring pictures via a USB stick.
I had a power loss while installing a windows update about two months ago. Ever since then my system will hang either on logging off or shutting down.I have tried making a new user (No Help)it hangs in safe mode also.I also do not have a list of prior updates in control panel since this problem.The system works fine other than that.
View 1 Replies View RelatedI've had windows 7 ultimate 64bits for a year now on my brand new pc, and today he starts and slowly ... around 35 mins to show desktop and will take forever if i click anything. I restarted in safe mode and it works perfectly, there are no exclamation points on the device manager. The only major change i have done but not recently was my video card from Nvidia to raddeon saphire.
View 1 Replies View RelatedI was handed a computer to try and clean up yesterday. It is an 2 GHZ AMD 64 bit CPU running windows 7 64-bit with a whole 1 GB of ram. Yes I said 1 GB of ram, I cringed too. I've got the owner convinced to upgrade that to 4GB and he's gonna go with a dual core processor while he's at it which should make a ton of difference.In any case, on to the problem. The windows install was pretty bogged down, somewhere around 80 running processes and no free physical memory. The machine actually booted to the desktop fairly quickly but wouldn't respond to anything due to all the running processes. I went through the task manager and killed enough tasks that I could navigate. I ran ccleaner on it to clear some junk. I went through the startup processes and cleared all the non-essentials. I went into the add-remove programs and removed the junk. I ran ccleaner again and cleared up the remnants and even ran the registry cleaner. I ran malwarebytes and an AVG virus scan and was actually surprised to find the system very clean. It's whole problem seemed to be an absurd amount of "legit" startup items. After I got it all cleaned up to around 40 running processes I defragmented the drive using defraggler and manually bumped the size of the swap file up to 1.5x ram.
The system is now running great, well as great as it can with only 1 GB of ram. All except for one problem.... when the machine boots up it comes to the screen where you can select a user, I select the user and then it hangs on the welcome screen for as much as 20 minutes before it goes on. It didn't take more than 20 minutes to boot before I started!How can it possibly be booting slower now with an optimized drive, larger swap file, and 0 extra components running at startup?
yesterday I was using my computer and it was working fine. I turned it off (like I do every night before bed). And when I turned it on again today it got stuck at the Welcome screen. I thought that maybe it was just a one time problem (most of my computer problems are) so I shut if off manually using the power button and the booted it back up again but it got stuck at the welcome screen again. So it is off now. This computer is homebuilt and it is almost 1 year old.
Specs:
i5 2400
AMD Radeon HD 6850
8GB RAM
Asus P8Z68-V Motherboard
If I use Remote Desktop to access a Windows 7 system. End RDP, and then return to log on locally the welcome screen hangs. Making a reboot necessary. Re-trying the RDP session also does not work, with a long error message starting:-
"The task you are trying to do can't be completed..."
My windows 7 hangs up after logging in. In safe mode with networking, it is running perfectly. I have had this problem intermittantly, and the last times I got a message that my video driver as stopped working and is recovering. My computer would work fine for about a month or so and then it would happen. I have downloaded latest drivers from nVidia, and have also disabled everything except Microsft items on Startup.The errors I get in the event log is as follows :DCOM got error "1084" attempting to start the service WSearch with arguments "" in order to run the server:{7D096C5F-AC08-4F1F-BEB7-5C22C517CE39}DCOM got error "1084" attempting to start the service ShellHWDetection with arguments "" in order to run the server:{DD522ACC-F821-461A-A407-50B198B896DC}DCOM got error "1084" attempting to start the service EventSystem with arguments "" in order to run the server:{1BE1F766-5536-11D1-B726-00C04FB926AF}The driver detected a controller error on DeviceHarddisk3DR3.The following boot-start or system-start driver(s) failed to load:
discache
spldr
Wanarpv6
The following boot-start or system-start driver(s) failed to load:
AsIO
AsUpIO
discache
spldr
Wanarpv6
I performed a clean boot by disabling everything except microsoft stuff at startup. The item I eliminated was adobe reader speed launcher. I can not see it in my programs or features so I can uninstall it. With it disabled..my computer stopped hanging.
I've got new pc with Windows 7 Home Premium x64. It sometimes hangs on shutdown screen. And then I hold power button (I don't have reset button on my new case) and see BSOD.
View 7 Replies View RelatedI just finished installing updates from microsoft and restarted my computer, it boots to a blank windows 7 screen without my username and a moveable mouse, i also ran diagnostics everything passed,,and it wont let me boot to safe mode, i press f8 and it just trys to boot like normal
View 1 Replies View Relatedihave a dell optiplex 380 runing windows 7.after supplying myusername and passwordit hangs at a welcome sceen for ever.
View 3 Replies View RelatedI've just did a clean install of Windows 7 to my SSD 2 weeks ago.
Recently, abut 4-5 times a week, my computer will hang at the Windws 7 logo screen. the part where the logo glows but it stops there. I tried the startup repair after I forceshut the computer, but no results.
I tried sfc / scannow but there's nothing wrong. I read that doing chkdsk on a SSD has no effect right ?
When I run the Windows 7 Home Premium OEM disc I get past "loading files" and then freeze on "starting windows". I see 4 little colored balls in the center of the screen (guessing the start of the MSFT logo) and then everything freezes.
Here's what I've got:
Monitor: Samsung T260HD 25.5in Rose/Black LCD w/ATSC
HDD: 2 x Seagate 1.5TB Serial ATA HD 7200/32MB/SATA-3G
Memory: Corsair Dominator 6144MB PC12800 DDR3 1600MHz (3x2)
DVD: LG 22X DVDRW SATA
Motherboard: ASUS P6TD Deluxe Intel X58 Socket LGA1366 MB
Power Supply: Corsair 950w 80 Plus Power Supply
GPU: 5850 is backordered, so am using an old Nvidia 6600 GT to attempt to install Windows - connected to monitor with DVI cable
OS: Windows 7 Home Premium OEM
I've done lots of research and tried:
1. Using a PS2 keyboard/mouse
2. Disabling USB in bios
3. Disabling just about everything else in bios
4. Tried w/ 2MB, 4MB and 6MB ram
Any help or suggestions would be greatly appreciated.
Windows 7 Home Premium hangs for a prolonged period of time at the shutdown screen. It normally takes a few seconds only, but it now begins to hang for several minutes at the shutdown screen.
View 3 Replies View RelatedMy laptop hands at the Welcome screen...has done this before once or twice, but today it does not straighten out after restarting. I am not tech savvy...plus I am 70 years old and skittish about trying some of the suggestions I read on here
View 2 Replies View RelatedI am with a friend re-installing Windows 7 on his laptop. Unfortunately the laptop had been infected beyond repair by a virus/malware and would not boot past bios. When installing Windows 7 x32, I make it to the "Setup is starting..." screen and it does not continue. It is not the disk as I have used the same one to install it on my laptop. The laptop is a Dell Inspiron 1545 with 4gb of ram and 500gb HDD space.
View 14 Replies View RelatedI'm using windows 7 home prem 64bit. This problem just happened today. I sign on with my password and the system says welcome, but won't actually login. It just hangs there. I used Avast to do a complete scan, but it didn't come up with anything. I used MS security essential it found a bunch of Java exploits and trojan downloader and I deleted them. But the problem is still there.
View 7 Replies View RelatedWhen windows updates, it then reboots, and just hangs on the 'starting windows' screen. Only after it updates, works fine before. I've re-installed it many times, but get the same result. This never used to happen until i did this fresh installation today. Now it happens every time, just after it installs some standard updates, it wont boot up..
View 1 Replies View RelatedI am trying to do a clean install of Windows 7 64 bit. It hangs at the starting windows screen and does nothing more. No HDD activity or anything. Let it sit all night like that to see if it would go any further, but it didn't. Anyone else have this experience, and if so, what did you do to make it work?
View 6 Replies View RelatedAfter recently building a custom PC, I am doing a clean install of Windows 7 (64 bit) and all goes well through the installation process (loading, expanding files, etc) except when after the 2nd restart when it starts up for the first time. It freezes or hangs on the black “starting windows” screen (the one with the new colored windows logo).
I have tried installation a number of times, including with a bare bones configuration (2 Gb RAM, 1 HDD, 1 DVD Drive, GPU, and all other peripherals disconnected) and still the same thing happens. I have also tried the process using the VGA cable instead of the DVI.
I was able to successfully install XP after failing to install Win7, so I don't think my HDD is bad. I am also using a PS/2 Keyboard
System:
CPU: Intel Core 2 Quad (Q9650) 3Ghz/1333Mhz/12MB
MBoard: Asus P5K-E
GPU: Sapphire HD 2600XT
HDD: 2 x WD 640 Gb 7200/32MB/SATA 3.0Gb/s (Caviar Black WD6401AALS)
RAM: Mushkin 4Gb DDR2 SDRAM (2 x 2Gb)
PSU: Antec NeoPower HE550w (ATX 12v)
OS: Windows 7 Ultimate (64 bit) OEM system builder pack
All components were purchased new from Newegg. I also have some peripherals: 2 DVD drives, Multi card reader, extra USB, firewire ports, wireless LAN card (although I disconnected those for the initial install attempt).
Any help or advice would be greatly appreciated. I am really at a loss to figure this one out. Could it be something to do with my video card driver? (Do I need to install that in the BIOS?)--I can see everything fine on my monitor though.
I recently got a PC that my office was getting rid of. The PC was in great shape and I was told it worked fine when they gave it to me. They ripped out the hard drive and gave me the machine. As soon as I got it, I put a brand new 2Tb Seagate HDD in. I also replaced the existing RAM (2x1Gb sticks) with 2x 2Gb sticks with the memory speed to match my motherboard. Finally I swapped out the ATI Radeon HD2900XT with a Nvidia Geforce GTX 460. There was a sound card (PCI) I removed as well as a redundant firewire port I unhooked from the Mobo. I then booted and peformed a fresh install of Windows 7 32bit Pro. Everything seemed to be going fine... until I tried to shut down. Windows would freeze on the Shutting Down screen. I mean freeze because the spinning circle would stop and the entire machine was unresponsive.
I read online that pre-Service Pack 1 Windows 7 didn't like multi-core processers and would have issues shutting down, so I updated to SP1 (along with a bunch of other updates). Now when I try to shut down, the Shutting Down screen disappears and the signal to the monitor ends, however the machine stays on. I can hear the fans running and see the lights to the PCI cards still on. Once again I have no option but to hold the power button until it shuts down. One extra note I double checked every driver and they are all up to day. Also when I boot in Safe Mode the PC shuts down fine and I have no problem restarting, just shutting down...
I have been trying multiple times to install Windows 7 to my hp pavilion g6-1007 laptop from an installation DVD but with no success so far. The problem is that I can't proceed with the installation. Every time I put the DVD and boot from there, first I see that black screen with the bar at the bottom saying "loading files".And after it finishes, it gets to a black screen (with only a cursor present) and then it does nothing more than that. It hangs there, no matter how much time I wait. The DVD-ROM also throttles down and the HDD activity LED stops blinking at all.I thought about a crappy image, so I downloaded the repair disk iso and burned a CD with it, but then I got exactly the same behavior. I'm thinking now of perhaps trying to install from a USB stick, as a last resort.
View 4 Replies View RelatedDell vostro 1000 Windows 7 Hangs after login, blank screen only cursor is shown
View 1 Replies View RelatedI was moving, my PC fell over. Plugged her in, all laggy and HDDs were not happy. Ran chkdsk, everything works now except the Welcome Screen takes forever, Windows 7 is on it's on Vertex 4, prior to me moving the Welcome Screen would be instant. After Windows boots everything is peppy and ready like it was! I don't understand!
View 4 Replies View Related
