I've just did a clean install of Windows 7 to my SSD 2 weeks ago.
Recently, abut 4-5 times a week, my computer will hang at the Windws 7 logo screen. the part where the logo glows but it stops there. I tried the startup repair after I forceshut the computer, but no results.
I tried sfc / scannow but there's nothing wrong. I read that doing chkdsk on a SSD has no effect right ?
My Windows 7 boot normal and after Windows Starting logo appear, blue screen appear quickly so much that I can't see what's message and restart. I tried repaid and fixmbr and fixboot, no way.
View 9 Replies View RelatedWindows 7 Home Premium x64 will hang after the "Starting Windows" logo, showing only a black screen, forcing me to hold down the power button.Windows will boot in safe mode and will boot if I disable my video card from Device Manager.I have run hard drive and memory diagnostics without any errors showing up.I did not change anything before the problem began occuring.I've already tried restoring to the initial system image from Lenovo OneKey Recovery (I'm using an IdeaPad Y560) and using the Windows System Restore, as well as updating drivers and BIOS.Attached are my event logs in administrative view from today (The problem has been occuring for a week or two, however, I don't have access to logs from that time), in which I reinstall my drivers and attempt to install a download manager in safe mode among other things.
View 8 Replies View RelatedMy computer specs:[CODE]I installed windows 7 ultimate 64bit on the hard drive with a different computer. But when I connect it to this, it freezes and stalls at the windows 7 loading/logo screen, and restarts.It is frusrating because i cannot use the computer
View 5 Replies View RelatedI tried to flash drive on another computer it worked fine, but on my desktop it will not..If i turn my dektop on without the flash drive it comes up and says Reboot and Select proper boot device or insert boot media in selected boot device and press a key.If i insert the flash drive it freezes..If i start the computer with the flash drive in, it wont even get to the screen it freezes at the screen that tells me to press f12 for this, esc for that etc etc.This person has the same problem..And I cant boot from my origonal Hard drive because I believe its gone bad, If i start it with that hard drive it says Reboot and select proper boot device, its like it doesnt even recognize it, which im guessing means its gone bad.. But it wont freeze with that hard drive, but I also cant do anything
View 14 Replies View RelatedI have a new toshiba laptop that the O/S failed to load after shutting down. It hangs at the bootup level when showing the windows logo.
View 1 Replies View RelatedComputer is frozen, black screen with movable mouse after splash logo. Same happens in safe mode. The log in screen never shows up. The computer sounds like its loading at that point, but nothing ever comes up. I can get into ubuntu. This happened after updating my graphics card nvidia. I have dual monitors. Windows 7 64 bit Home Premium, HP Pavilion p6107c Desktop.
View 1 Replies View RelatedIts my office comupter, it worked fine yesterday. when i came in today i just locked up on the start up screen. I ran a smart extended test on the drive it passed. I even purchased a new hard drive and replaced. I put in the install disc and wait for the recovery window, it starts with loading fles then starts windows and hangs up in same spot. I switched out the Ram and did the same thing. dont know what else it would be or to do.
View 6 Replies View RelatedI am new here so apologies for being a newbie. I have a mid ranged gaming tower from ncix. That's about 7 months old. Its a 64bit windows 7 with 12gbs ram and 1tb hard drive.I was playing Starcraft with friends earlier today when suddenly the computer restarted during the match and was unable to boot up again after the sudden restart.It hangs at a black screen with the blinking underscore.
View 2 Replies View RelatedWhen i boot my computer up it will stop for about 15 mins on boot screen the screen that has options press delete for setup etc... stay there for around 15 or 20 mins then boot on to desktop
View 1 Replies View RelatedOkay so I may have buggered something up royally, but I took the CPU out of my mom's computer. Ended up dusting it out, because it was overheating. I wanted to try the phenom out in my board so I swapped them out. It is an HP pavilion a6755y se. I put an Athlon x2 in it and it wouldn't post. I took it out and put the phenom back in and now it won't boot to windows. I reformatted the entire drive and to no avail it still didn't work. I disconnected all USB's attached and I am using a PS/2 mouse and keyboard. This is really frustrating to me. It loaded the default bios settings from when I took the CMOS battery out. Had to change the Sata controller to IDE. When put on ACHI it gave me a screen full of colorful boxes that flashed and really scared me. I am very frustrated and I am wondering where I should go from here. My mom is pissed and she wants her computer back to normal conditionDunno how to flash the bios. It reads all the ram and the phenom that is in its socket so I don't think it's a hardware issue. Although, I can't get a livecd to run for the life of me. I dunno what I have done, but I would like to fix it asap even if it needs new parts. It did take quite a bit of force to get the heatsink off the cpu when I was dusting
View 3 Replies View RelatedI am running an Advent desktop PC and its stats are as follows; Intel Core i5-2310 CPU @ 2.90GHz 8GB RAM Win 7 64 bit.The problem I am having is when ever i boot up the computer it shows the Advent logo-screen where I can access the boot menu etc but then it goes to a black screen with a cursor/underscore flashing in the top left... This screen stays for quite a while and I am not sure if it stops because of a key I have pressed or just because it has run its course but after it disappears the computer goes back to the logo-screen for a moment and proceeds to boot up as normal except slightly slower than usual.It is a relatively new computer and it has no problems running at all once the boot up is complete it is fast and as friendly as ever.
View 4 Replies View RelatedI just finished building my computer the other day and installed Windows 7 Ultimate 64 bit edition. The install went great and the computer is amazingly fast, but I am less than impressed with the boot time. I have windows installed on two Corsair Force GT 60 GB Solid State Drives in RAID 0 configuration. The motherboard is a GIGABYTE G1. Sniper and the processor is an i7 990X. As I said, I am very impressed with the performance once the computer is on, but it takes ages to get there. I had some trouble with it stalling at the "Verifying DMI Pool Data..." for about 30 seconds each boot. That seems to have been fixed when I cleared the board and reconfigured BIOS. The problem I am having now is that when Windows begins to load, it says "Starting Windows" (right before the logo flies in). It will sit at that screen for over a minute before it starts to animate. It only takes about 5 seconds to load after the animation starts. No problems after that. It does change depending on the BIOS settings. It did not always do this. I have been messing with them so much to try to isolate what's causing it but I cannot.
View 3 Replies View RelatedI have a 7 month old Gateway desktop I got from Best Buy. Not long after getting it I replaced the power supply and put in a graphics card, no problems whatsoever. I didn't plug or unplug anything, but this morning I tried to turn it on and it sticks at the black screen with the logo, the logo will do the small wave thing and pulse but the computer won't go past it. I have tried recovery, repair, memory repair, and CHKDSK, all say they can't fix it automatically. Safe mode doesn't work and gets stuck while trying to load the files for it.
I took out the PSU and GPU and put back in the original power supply and it didn't fix it (not good with hardware so don't laugh if that sounds stupid). It did not come with a Windows 7 repair disk. I don't want to take it back and trade it in because I have files on it I want to keep, is there anything else I missed that may fix this?
Specs are (general as I don't know specifics):
Windows 7 Home Premium 64 bit
i5 2320 CPU quad core @ 3GZ
8 GB RAM
Radeon HD 6770 GPU (Intel HD now that it's taken out)
I have a HP Pavilion G6 notebook and Windows 7 Ultimate 32. The OS froze today while I was working and the only solution was to shut it down by holding the power button. I restarted it afterwards and after the Windows 7 logo screen my display shuts off (it's not just a blank screen, the monitor is off). I tried using system restore and it gets me as far as the log-in screen and after I enter my password, it gives me another blank screen (this time the monitor is on, but the screen is blank) and ctrl+alt+del does not work, nor does anything else. I am writing from safe mode right now, it seems to work just fine, but a normal start-up gives me a black screen.
View 1 Replies View RelatedI'am running windows 7 professional. When i boot the PC, i have no trouble up to the point of the windows logo. When this disappears my screen (SyncMaster 913n) keep displaying the text "optimal screen resolution is 1280x1024 60 hertz" and then i dont see anything else than that. Even if i change the screen resolution to 800x600 i get the message. My GFX is 8800 Geforce GT with the drivers 285.62 (64Bit) same issue. Everything was working fine earlier today, then after a reboot i got this issue. The computer is a clean re-install so can their be missing some drivers besides the GT 8800 that can make the problem?
View 4 Replies View Relatedtoday i was working on the PC when the power got down for a second, i started the pc and the power blinked again, so i just waited 30 mins or so and i turned on the pc again, but this time it only got to the color balls that form the windows logo, showed the "please wait" message with a black background to finally led me to a black screen with the windows 7 ultimate logo on the bottom center, a button with some accesibility options to the left and the red button to turn off and reset the machine,i cant do anything more, Ctrl+Alt+Supr doesn't work or the windows key+R. starting in safe mode doesn't change anything neither.
my specs are:
Intel core 2 duo 2.4 ghz
2 gb RAM
250 GB HDD
geForce 9500 gt
PS: i didn't install or configure anything before the second time the power got down, and after the first one the pc started fine.
Basically my laptop was working fine last night. I turn it on this morning and after the windows logo appears the screen goes black. However i can see and move the mouse cursor still.I tried pressing f8 at the beginning of the start up, and tred to repair my problem using the windows 7 repair features, but it didn't work, annoyingly i forgot to set a restore point as well so i can't try that.When i go into safe mode the exact same thing happens, but with the mouse being slightly more pixelated and blocky.I've got a Windows 7 Premium 32 bit disk which i purchased from Windows, but when i load that up it tells me that to install it i need to log into windows, which i obviously can't.I'm using a HP G70-120EM, i've had it for just over 12 months (Annoyingly exactly a week after the warranty is void) and like i mentioned, i've been using Windows 7 premium 32 bit for the past 2 months
View 9 Replies View RelatedMy laptop is hp-dv6-3122tx with ATI 5650 and intel hd switchable graphics.Recently my laptop started giving me a black screen after the windows logo. I was having some issues with my GPUs too.Sometimes my ATI card was not coming up in the device manager and i was only using intel HD. i have noticed that when that happens i can't see my laptop charging icon changes to plugged in mode even though i plug in the charger , but the laptop was of course charging perfectly . But recently i found my ATI card back in device manager and it was working pretty well. But after exactly a week I started getting some white lines appearing in the display too. With that knowledge i assumed that the black screen issue is a counter-product of the GPU issue. I used safemode to uninstall all the GPU drivers. Then i can log into windows and work normally and windows detects the GPUs and install the plug and play drivers. After they install it i can restart the pc and work normally. But once a shut this down and later when i try to switch it on i get the black screen issue from ground zero. that makes me believe that this is mere a software issue. But those white lines i mentioned about is due to hardware fault i guess. I don't know what to do right now. I don't want ATI graphics, intel HD is ok. i just want to switch this thing on and do my work coz i can't afford another laptop right now.
View 4 Replies View RelatedSo last night I turned off my PC as usual. Rebooted it this morning and every time the Windows 7 Logo disappears, all I see is a black screen, no mouse pointer, cant bring up task manager, the pc seems unresponsive. I am currently running the PC in safe mode.
There are other threads on the forums and on google, I have tried everything so far. As a list for you, this is what I have tried:
Windows Restore
Windows Repair
Reinstalling Windows 7 (will not allow me to do so from safe mode)
Booting Windows in low resolution mode.
Booting windows from the Win 7 CD I made, this causes me to get past the windows logo, then all I see is a mouse pointer and a windows background.
Using winkey + P does nothing.
I have 2 GeForce 9800 GX2s - I use 2 displays normally, occasionally using a third. The machine was running fine last night and no new software has been installed for the past 3 days. I assume the issue is multi-display related, however the pc is totally non responsive after the windows logo which suggests something else =/.
I am totally at a loss and need this PC for my work (I work from home in Austria for several companies in other countries), I have been at this since about 5am and 5 hours later there has been no change.
when i start up my laptop (Windows 7 ultimate) after i see the windows logo the screen goes black for about 20 seconds and i have scanned for everything using malwarebytes, superantispyware , security essentials and also on start up i only have my antivirus running as all else is unticked, any ideas to the problem as i have seen people ask about it also in Yahho answers but nobody has been able to fix.
View 4 Replies View RelatedI've been having this issue and have been unable to fix it so far. I can get into my computer in safe mode but have not been able to get on normally without it freezing on the windows logo screen. I tried running various tests which have failed and even reinstalled windows (upgraded so I wouldnt lose data) but that failed as well. System repair doesnt work either. I have no idea what could be wrong.
View 3 Replies View RelatedI bought a new Samsung RC520 laptop. I logged in fine and started to install virus software, applications, windows updates etc. In between all this I had to reboot for the installations to be completed with no problems.
I then installed more window updates (office 2010) followed by a reboot. From this point on wards when I power the laptop on it will get as far as the Windows logo screen and then goes into a black screen. If I leave it for 5 minutes the mouse arrow appears but still black screen.
I tried booting into
Safemode, last know configuration, Enable low-resolution video (640×480)" startup but still get the black screen. Ran the repair from the Windows 7 disc. Can't do a system restore as the laptop is so new it hasn't created one yet, doh! Tried plugging it into an external monitor and still black screen on laptop.
So basically over the weekend I shut my computer down because I was not going to be home. On sunday I go to turn my computer on and it hangs at the windows logo splash screen after POST. So I grab my laptop and start researching. I am able to get into safe mode with out any trouble only when I start windows normally do I run into problems. So here is what i have tried and with no success. Start up repair w/ and w/out disc, system restore, I have reinstalled windows 3 times, with 2 different versions, pro and ultimate and on first reboot I have the same problem. I flashed my bios about a year ago and have had minor issues since then that were all fixed by using krndbg and windows symbols server as a reference...
View 5 Replies View RelatedI'm having an issue with one of my windows Vista systems. It's a HP computer (blah, I know)... and is several years old. It's issue of late occurs on start-up. After attempting to "Start windows normally", the system will display the load screen then immediately go to a black screen. It doesn't restart... it just stays black. I've tried to go into Safe Mode as well as do a system restore and go to the last known good config. Nothing works. The problem is there is over 200 gb worth of work, school and personal files on this system I need to export to my external hd. After that I don't care what happens to this freakin computer.
View 1 Replies View RelatedIt simply disables display.
My screen goes blank right after the glowing windows logo.
This is a fresh install.
It's an ATI card. Brand new. It was working (for 2 weeks) on vista perfectly.
I understand that there is an issue with ATI catalyst control center.
with all due respect, I can't load a driver if my screen is disabled.
How to Add and Restore the Windows Logo Screen Saver Back in Windows 7 ?
View 0 Replies View RelatedI'd hang on the windows 7 logo as it flies up (it freezes on the colored balls) and then it goes to a blue screen, hinting at hardware-related problems. After a restart or two, I am usually able to make it to the desktop like normal. I just took this easy route, assuming that ignoring it would make it go away.Well, this morning, it happened again, but then when it made it passed the windows7 logo, I got to a black screen with just my mouse. This is a common enough problem- plenty of complaints and advice out there. When I try running safe mode, it hangs on AVG-named drivers. So i went and deleted them all through a thumbdrive linux boot (Can't I just reinstall AVG or another program once my comp is working?) but now it hangs on a new driver so I stopped deleting them. CLASSPNP.sys, which is another hugely common problem. Safe mode is out.Put my digital copy of Windows 7 on another thumb drive and booted to that to try and use recovery mode. No recovery images, memory check didn't yell at me, chkdsk seemed to run fine (unless running it in the X or "boot" drive is wrong and I have to figure out how to navigate to the C or D drive in cmd ...but even then, what do I do with the result of chkdsk, especially when it will probably show no problems?) so I THINK recovery tools are out, unless I failed to use them correctly.So now I'm faced with re-installing windows, in which case I have no idea what my activation key is, being that it was a digital copy and I don't have the student access to where I originally downloaded it.
TL;DR:
1) Can I find my win7 activation key with a key-finding/decrypting program while using my linux boot?
2) I've read that my GPU (nvidia 460) or even PSU (Corsair 650) could be to blame- are there ways to troubleshoot/verify that if I don't have other parts to replace them with?
I have xfire 5770 with driver 11.5b hotfix and win7 ultimate. This is fresh built so no hardware fault.
620w corsair and 4 gb kingston blu, i7 2600k
My PC reboots its self after windows logo I have got it to work before by doing a system restore but I would have to do it twice to get it to work. I have a mini dump which I will upload.
Problem signature:
Problem Event Name:BlueScreen
OS Version:6.1.7601.2.1.0.256.1
Locale ID:2057
Additional information about the problem:
BCCode:124
BCP1:0000000000000000
BCP2:FFFFFA8007D327F8
BCP3:0000000000000000
BCP4:0000000000000000
OS Version:6_1_7601
Service Pack:1_0
Product:256_1
Files that describe the problem:
C:WindowsMinidump - 82812-24913-01.dmp
C:UsersAdminAppDataLocalTempWER-38563-0.sysdata.xml
Read our privacy statement online: [URL]
If the online privacy statement is not available, please read our privacy statement offline: C:Windowssystem32en-USerofflps.txt
I'm having incredibly annoying issues with my windows starting up on my asus g73sw laptop. It wouldn't go past the windows logo screen. I thought my hard drive was probably shot, so I replaced it with a brand new solid state drive, fresh windows install. Worked perfect for one day, then the same problem. Tried completely fresh installs twice since then and never transferred any files at all in case they were corrupted. The computer will load now, but not before sitting on the windows logo screen for 5 minutes or more. I have checked the BIOS to make sure the solid state drive is boot option number 1.
View 2 Replies View Related