Its my office comupter, it worked fine yesterday. when i came in today i just locked up on the start up screen. I ran a smart extended test on the drive it passed. I even purchased a new hard drive and replaced. I put in the install disc and wait for the recovery window, it starts with loading fles then starts windows and hangs up in same spot. I switched out the Ram and did the same thing. dont know what else it would be or to do.
View 6 RepliesMy dell n5030 laptop isnt getting past the windows start up screen. It boots up fine up to the part where the four balls become the windows logo, but then freezes there everytime. When i try to select the windows start up repair it blacks out the screen and I cant do anything.
I know its not a faulty hard drive because its newly fitted and this problem occured previously on a different hard drive aswell.
I have a teensy problem in the form of a computer hang up.After running a disk check when my primary drive (C) did not appear in the computer's defrag list, my computer began to lag badly. After a crash, it then hung at the Starting Windows screen. Assuming repair or reinstall of the OS was needed, I popped in my installation disk. It get so far as the "Setup is Starting" screen before it hung (further emphasized by the sound of the in-use CD/DVD drive ceasing activity noise).I'm completely stumped at this point and have no funds to get myself a replacement laptop, and it's an item in my possession that is sorely needed
View 6 Replies View RelatedI am new here so apologies for being a newbie. I have a mid ranged gaming tower from ncix. That's about 7 months old. Its a 64bit windows 7 with 12gbs ram and 1tb hard drive.I was playing Starcraft with friends earlier today when suddenly the computer restarted during the match and was unable to boot up again after the sudden restart.It hangs at a black screen with the blinking underscore.
View 2 Replies View RelatedI've just did a clean install of Windows 7 to my SSD 2 weeks ago.
Recently, abut 4-5 times a week, my computer will hang at the Windws 7 logo screen. the part where the logo glows but it stops there. I tried the startup repair after I forceshut the computer, but no results.
I tried sfc / scannow but there's nothing wrong. I read that doing chkdsk on a SSD has no effect right ?
When i boot my computer up it will stop for about 15 mins on boot screen the screen that has options press delete for setup etc... stay there for around 15 or 20 mins then boot on to desktop
View 1 Replies View RelatedF keys will not work either! I don't think I have a disc to restore from, what else can I do?
View 4 Replies View RelatedI just finished building my computer the other day and installed Windows 7 Ultimate 64 bit edition. The install went great and the computer is amazingly fast, but I am less than impressed with the boot time. I have windows installed on two Corsair Force GT 60 GB Solid State Drives in RAID 0 configuration. The motherboard is a GIGABYTE G1. Sniper and the processor is an i7 990X. As I said, I am very impressed with the performance once the computer is on, but it takes ages to get there. I had some trouble with it stalling at the "Verifying DMI Pool Data..." for about 30 seconds each boot. That seems to have been fixed when I cleared the board and reconfigured BIOS. The problem I am having now is that when Windows begins to load, it says "Starting Windows" (right before the logo flies in). It will sit at that screen for over a minute before it starts to animate. It only takes about 5 seconds to load after the animation starts. No problems after that. It does change depending on the BIOS settings. It did not always do this. I have been messing with them so much to try to isolate what's causing it but I cannot.
View 3 Replies View RelatedWhen I started my computer, it started with a green screen then the picture is distorted. What do I do to fix this
View 5 Replies View RelatedI have a windows 7 advent laptop. When I turn my laptop on, it works and comes up with the option either to "launch startup repair" or "start windows normally". Whichever one I select, the same thing happens. It goes to the blue screen as normal where I would select my user but that option doesn't come up. It's just the blue screen. I have tried rebooting it, and waiting for it to load for over 10minutes but it doesn't change from that screen. The cursor still works but no keys work on it and there is nothing to click.
View 2 Replies View RelatedMy friend was having problems with her computer. So I ran a few programs to check it out and clean it up.. (AVG, CCleaner, AntiMalware...) But then after running the last one and rebooting, the screen goes black once Windows starts to load. Then the mouse appears but still nothing. I tried safe mode and still nothing... Not sure what to do, but just gaining access to copy files to an external hard drive is important. I was planning to reformat anyways..
View 3 Replies View RelatedI can not get my computer to start up. I have gone through the recovery start up, pressing F8 to get to the screen, after pressing system recovery, it just takes me to a blue screen and then back to the page that tells you windows failed to start up normally. I have tried safe mode, the same thing happens and then I tried last known good configuration. That led me back to a blue screen with nothing happening except the lights on the front of the computer blinking white several times, then orange back and forth. At one point it did go to a black screen with the lights on the front blinking, but it did that forever and nothing happened
View 3 Replies View RelatedMy computer was working fine a couple days ago and all of a sudden got a terrible Trojan that would spam me with random IE ads. So I ran ad-aware and it got rid of the problem. I went to bed relieved but woke up to my computer in a black screen with just a single cursor "_" flashing. I figured it was a fluke and restarted. same problem.
So I decided to open up the computer and check the SATA drive connections. Everything looked fine but the problem still persisted. I decided that it could just be slot number 1 and moved it to slot 3. The computer would start up and go to desktop but all of my icons disappeared and the computer would just hang if I tried to open any file or go on the internet or any program.
Obviously, it was because the SATA drive was now in a new slot?? I'm not sure. But I put it back into slot 1 and went into the BIOS setup and sure enough, it was a "not detected" for slot 1. The main HDslot.
I tried to reset the BIOS using the jumper method and it still just hangs on black screen with cursor "_" flashing...
Specs:
- windows 7 ultimate edition
- Intel duel core @ 3.2ghz
- 4gb RAM
- Asus P5Q-PRO motherboard
- geforce 8800 GTX graphics card
Like the title says, my computer is stuck on a black screen.I downloaded an update and was instructed to restart the computer. After restarting the computer it went to a black screen. It won't do anything past that. I've tried starting it in safe mode but always with the same result. I have no idea what to do with this short of taking it to Best Buy to have the geek squad take a look at it and frankly I don't feel like doing that.
View 2 Replies View Relatedmy laptop will not load up. I can get it to the screen where it says repair computer, safe mode and all that. (advance boot options) but anytime I click any off them it goes to a screen where it says I need to put in the windows installer disk. I do not have any disk but I downloaded the repair disc from my other laptop. I put the disk in the computer and restart it and it just goes back to same screen. It does not automatic rebot, or ask me to rebot from disk.
View 2 Replies View RelatedEverytime i start my computer from cold i go through my bios screen then come to the windows 7 screen where the windows fly to you and float/wave It hangs wont go to the log in screen or anything. I have to do a force shut down with my power button. When i start my computer again it goes fast to the "windows did not boot properly screen" I click start windows normally and it boots super fast. and on every restart it boots fine. Just from a first cold start.. What could be the problem?
View 1 Replies View Relatedive been running a i5 -2500k system i built a year ago absolutely fine oc'd to 4.1ghz @1.248v i added a ocz agility 3 60gb ssd to use as an SRT cache device about 7 months ago and its been running like a dream, until recently when i turn the computer on it boots up windows in under 40secs but hangs/crashes whilst searching for network and i have to reset my computer. its quicker to find network on 2nd boot up although not everytime.
View 5 Replies View RelatedA few days ago I awoke my Toshiba laptop in the morning, only to find it hanging up with continuous HDD activity. After a while I did a hard shutdown and tried to restart, but the HDD activity continued, and after an hour of trying, it was barely past the start screen - zero chance of any useful activity.
It performs normally in command prompt, and I can barely get it booted in safe mode (HDD thrash eventually stops until I ask it to do anything). Task manager doesn't show any unusual processes or services, but the resource monitor does show the HDD activity. Chkdsk (thru command prompt) on the X and D partitions came out fine, but on the C drive it doesn't even get to 1% and slows to about 1 file/minute. I attempted a Start Repair, but it said nothing was wrong. Tried a System Restore, but for some reason no restore points could be found.
The HDD seems to be performing OK (I'm using robocopy/cmd prompt to copy all I can to an external HDD), with only the occasional I/O error. It's possible I caught a virus, although I'm generally cautious (Ad-Aware antivirus, all updates ASAP, regular scans with this and Malwarebytes).
I'd really, really like to find a way out of this without a complete reformat. I've tried stopping everything I could in Safe Mode, but to no avail. Also tried to uninstall my AV software (and anything else that seemed to be running at startup), but was denied there as well.
I'm at my whit's end with this. My PC shuts down fine but hangs on restart. It does this is both safe and normal mode. It appears to hang right before the HD would get turned off. The SHUTTING DOWN screen proceeds fine and the HD stops it's activity, the screen goes black (the HD light stays) and it just hangs there. Pressing the RESET button on the PC starts it up fine. If I am restarting from some utility (for example when installing Windows) it can hang with the RESTARTING WINDOWS screen.
View 3 Replies View RelatedI have been having random reboots and sometimes hard-hangs whenever I am starting to play any PC games after start-up. I have to keep resetting and run through any checks I could think of but the checks always find everything to be okay. Sometimes I do get BSOD and I remember vaguely something about SYSTEM SERVICE EXCEPTION and also the DRIVER IRQL NOT LESS OR EQUAL phrases.[CODE]
View 9 Replies View RelatedI was moving, my PC fell over. Plugged her in, all laggy and HDDs were not happy. Ran chkdsk, everything works now except the Welcome Screen takes forever, Windows 7 is on it's on Vertex 4, prior to me moving the Welcome Screen would be instant. After Windows boots everything is peppy and ready like it was! I don't understand!
View 4 Replies View Relatedthis happens all the time now and becomeing annoying . I have window 7 , IE it happens on my laptop .
View 2 Replies View RelatedI've had windows 7 ultimate 64bits for a year now on my brand new pc, and today he starts and slowly ... around 35 mins to show desktop and will take forever if i click anything. I restarted in safe mode and it works perfectly, there are no exclamation points on the device manager. The only major change i have done but not recently was my video card from Nvidia to raddeon saphire.
View 1 Replies View RelatedI was handed a computer to try and clean up yesterday. It is an 2 GHZ AMD 64 bit CPU running windows 7 64-bit with a whole 1 GB of ram. Yes I said 1 GB of ram, I cringed too. I've got the owner convinced to upgrade that to 4GB and he's gonna go with a dual core processor while he's at it which should make a ton of difference.In any case, on to the problem. The windows install was pretty bogged down, somewhere around 80 running processes and no free physical memory. The machine actually booted to the desktop fairly quickly but wouldn't respond to anything due to all the running processes. I went through the task manager and killed enough tasks that I could navigate. I ran ccleaner on it to clear some junk. I went through the startup processes and cleared all the non-essentials. I went into the add-remove programs and removed the junk. I ran ccleaner again and cleared up the remnants and even ran the registry cleaner. I ran malwarebytes and an AVG virus scan and was actually surprised to find the system very clean. It's whole problem seemed to be an absurd amount of "legit" startup items. After I got it all cleaned up to around 40 running processes I defragmented the drive using defraggler and manually bumped the size of the swap file up to 1.5x ram.
The system is now running great, well as great as it can with only 1 GB of ram. All except for one problem.... when the machine boots up it comes to the screen where you can select a user, I select the user and then it hangs on the welcome screen for as much as 20 minutes before it goes on. It didn't take more than 20 minutes to boot before I started!How can it possibly be booting slower now with an optimized drive, larger swap file, and 0 extra components running at startup?
yesterday I was using my computer and it was working fine. I turned it off (like I do every night before bed). And when I turned it on again today it got stuck at the Welcome screen. I thought that maybe it was just a one time problem (most of my computer problems are) so I shut if off manually using the power button and the booted it back up again but it got stuck at the welcome screen again. So it is off now. This computer is homebuilt and it is almost 1 year old.
Specs:
i5 2400
AMD Radeon HD 6850
8GB RAM
Asus P8Z68-V Motherboard
If I use Remote Desktop to access a Windows 7 system. End RDP, and then return to log on locally the welcome screen hangs. Making a reboot necessary. Re-trying the RDP session also does not work, with a long error message starting:-
"The task you are trying to do can't be completed..."
My windows 7 hangs up after logging in. In safe mode with networking, it is running perfectly. I have had this problem intermittantly, and the last times I got a message that my video driver as stopped working and is recovering. My computer would work fine for about a month or so and then it would happen. I have downloaded latest drivers from nVidia, and have also disabled everything except Microsft items on Startup.The errors I get in the event log is as follows :DCOM got error "1084" attempting to start the service WSearch with arguments "" in order to run the server:{7D096C5F-AC08-4F1F-BEB7-5C22C517CE39}DCOM got error "1084" attempting to start the service ShellHWDetection with arguments "" in order to run the server:{DD522ACC-F821-461A-A407-50B198B896DC}DCOM got error "1084" attempting to start the service EventSystem with arguments "" in order to run the server:{1BE1F766-5536-11D1-B726-00C04FB926AF}The driver detected a controller error on DeviceHarddisk3DR3.The following boot-start or system-start driver(s) failed to load:
discache
spldr
Wanarpv6
The following boot-start or system-start driver(s) failed to load:
AsIO
AsUpIO
discache
spldr
Wanarpv6
I performed a clean boot by disabling everything except microsoft stuff at startup. The item I eliminated was adobe reader speed launcher. I can not see it in my programs or features so I can uninstall it. With it disabled..my computer stopped hanging.
I've got new pc with Windows 7 Home Premium x64. It sometimes hangs on shutdown screen. And then I hold power button (I don't have reset button on my new case) and see BSOD.
View 7 Replies View RelatedI am having a similar problem using the "blank" screen saver with a password...
Purchased a new Dell XPS 8000 three days ago and everything appeared to be working fine. I was using the wired keyboard and mouse supplied with the computer.
Connected my old usb Microsoft Wireless Comfort Keyboard/Mouse 1.0A to the system and suddenly the system would never go to screen saver. I checked for windows updates and it recommended an update for the wireless keyboard and mouse. Installed the update and now my system goes to screen saver.
The problem now is that it doesn't return from screen saver consistently. I am still characterizing the problem... When I move the mouse I get the login screen, type the password, hit return, and the screen goes blank (as if it is back in the blank screen saver).
I have had the desktop reactivate very quickly (normally) if the screen saver was on only for a few minutes. I have had it take 2 minutes plus to get to the desktop. I have also had the system freeze and ended up power cycling.
I thought this was a power management issue. I tried setting up power settings so nothing would ever go into power save mode but this hasn't made a difference.
I just reconnected my wired keyboard and mouse to see if the issue goes away. I am expecting this to solve it, but I really would like to use the wireless.
Update...
1. Went back to wired mouse/keyboard and the issue persisted.
2. Rolled back updates from last Windows 7 update: Dell Monitor 6/21/2009 1.0.0.0, Microsoft (HID Class) 5/8/2009 7.00.258.0, and Microsoft (USB) 11/03/2009 7.10.344.0. Problem still persisited.
3. Did a "reset to defaults" on the Dell power settings profile and removed the password from the blank screen saver. Seemed to resolve the issue, but only tried it once with the screen saver on for an hour.
4. Added the password back to the screen saver. Worked once and then hung the computer the 2nd time. I move the mouse, get the login screen, type my password, hit return, and the monitors go blank (as if it is in the blank screen saver). At this point it is hung, no mouse, no keyboard, ... must power cycle to get the system back up and running.
Yet another update...
Found a "solution" (let's call it a work around) for this issue in another thread: Seven locks up after an hour or so idle. I had my task bar set to auto hide, changed it to be visible all of the time and no more system hangs.
While I am thrilled to not have to power cycle everytime I go to screen saver, I would still like to auto hide the task bar. I wonder if there isn't a better fix that would allow me to still configure the task bar.
XPS 8000, 8 GB Ram, 1 TB Hard Drive, ATI 4630 graphics.
Since a coffee spill on the keyboard, my laptop won't normally boot as it did before.ow it just hangs on boot screen. It takes somewhere between 10s and 5min to boot.ometime it requires to be reset several times to actually boot windows. I switched RAM, the problem persisted. Every component in my laptop is working (Wifi, Ethernet, Sound etc.) What should I do?
View 3 Replies View RelatedI thought I'd move with the times and picked up a copy of Windows 7 Ultimate. I had Vista installed before.
Booted from CD, delete/recreate partition and did a clean install.
The installer hangs on a black screen after the first reboot. Even left it overnight without progress. Forcing a reboot and going into Safe Mode the setup tries to continue, then comes up with a prompt saying 'Setup cannot run in Safe mode, rebooting your computer', whereupon it hangs again.
This is the sequence I tried:
1. Boot from CD, delete boot partition, new partition, clean install (HUNG)
2. Disconnect router, then as 1. (HANG)
3. Reset BIOS to factory defaults, then as 1. (HANG)
4. Disconnect external hard drive and printer, then as 1. (HANG)
5. Disabled on-board chips like sound, legacy USB etc, then as 1. (HANG)
I've tried booting to the CD and doing a 'repair windows' but that comes back without problems.
The only other thing I could think of is that the graphics card is incompatible... but I don't have onboard VGA and I don't have another card just lying around.
I've never had a problem doing a clean Windows install. I'm really disappointed they're making it so difficult. Does anyone have any suggestions? I might have to just go back to Vista...