Computer Is Stuck At Logo Screen?
Dec 3, 2011
I tried to flash drive on another computer it worked fine, but on my desktop it will not..If i turn my dektop on without the flash drive it comes up and says Reboot and Select proper boot device or insert boot media in selected boot device and press a key.If i insert the flash drive it freezes..If i start the computer with the flash drive in, it wont even get to the screen it freezes at the screen that tells me to press f12 for this, esc for that etc etc.This person has the same problem..And I cant boot from my origonal Hard drive because I believe its gone bad, If i start it with that hard drive it says Reboot and select proper boot device, its like it doesnt even recognize it, which im guessing means its gone bad.. But it wont freeze with that hard drive, but I also cant do anything
View 14 Replies
ADVERTISEMENT
Jul 15, 2012
Well it had been awhile since I reloaded windows and found out about win8 so I decided to try the new windows 8 release preview. After it installing it, It would go past the windows loading screen and leave a blank screen. Disappointed I went to load windows 7. Installed fine, but after the first restart it will not go past the windows logo screen.
When I say I'm reloading windows I am not formating my harddrive. I'm running a single harddrive setup and have 500gig of entertainment and miscellaneous I have not way to backup. I do the write over partition thing where it throws everything in a windows.old folder. I'm considering getting a solid state just to load windows to. Formatting the current drive is not an option.
I can boot to safe mode, but being this is a new install there is nothing I did to undo.
View 2 Replies
View Related
Jan 1, 2013
i recently install new updates on my laptop , after downloading and installing and asking me to restart my computer ,i did choose to restart now . After booting up again it is now stuck on windows 7 logo screen on startup. I tried booting up on safe mode and last known good config. but it didn't work. Also tried to use windows installation disk but it doesn't work either it just keep loading on "setup is starting" also tried "repair my computer" option but it just show me just a plain black screen
i had a Toshiba satellite laptop l745d with a6 vision AMD graphic card,windows 7 ultimate x64 os , 4gb of ram quadcore
View 8 Replies
View Related
Nov 17, 2012
I'm not 100% sure if this is even the right place to post this, so sorry if it's in the wrong forum. I have a Asus N53S laptop runnin windows 7 32 bit and I am having some trouble with it. This will probably be a large post so bear with me, the first problem I started having was blue screens on startup. I was able to fix the computer by running Startup repair a few times (tool about 3-4 hours) after that it worked for a day but the next day when I turned on the computer it froze and the music that was playing turned into a loud droning noise. After that I ran the startup repair again it did not work so I did a system restore, it seemed to fix the problem but sadly on startup I started getting blue screens again and this time neither startup repair nor system restore would work (I get a message saying there was a unexpected error: the system cannot find the file specified. (0x80070002) please close system restore and try again) I re open system restore 5 times and I get the same message.I restart my computer , spam f8 and choose the use last known good configuration. After I restore everything to factory settings and finish installing my steam games and other files I Ty restarting the computer to see if it fixed the problem. It seemed to have worked however that night there was a particularly large windows update (90 or so a one time) I clicked shutdown and let it finish the updates while I went to sleep. The next morning I wake up and turn on the computer it finishes syncing the updates then stays at the starting windows screen ( the logo would not show up just those words and a black screen. After it sat like that for 10 minutes or so I hold the power button and try again ,this time it did the same thing but only for a few seconds and it ran startup repair itself , startup repair could not fix the problem.
View 1 Replies
View Related
Mar 6, 2011
I recently built a computer, and tried to install Windows 7 OEM on it, but it gets stuck at the screen where it says starting windows and the logo appears. The logo gets smaller and larger. I've been told it might be something with the RAM, but tested it out and that's not the problem.
View 2 Replies
View Related
Dec 2, 2012
I've just did a clean install of Windows 7 to my SSD 2 weeks ago.
Recently, abut 4-5 times a week, my computer will hang at the Windws 7 logo screen. the part where the logo glows but it stops there. I tried the startup repair after I forceshut the computer, but no results.
I tried sfc / scannow but there's nothing wrong. I read that doing chkdsk on a SSD has no effect right ?
View 4 Replies
View Related
May 17, 2012
My Windows 7 boot normal and after Windows Starting logo appear, blue screen appear quickly so much that I can't see what's message and restart. I tried repaid and fixmbr and fixboot, no way.
View 9 Replies
View Related
Jun 8, 2012
Computer is frozen, black screen with movable mouse after splash logo. Same happens in safe mode. The log in screen never shows up. The computer sounds like its loading at that point, but nothing ever comes up. I can get into ubuntu. This happened after updating my graphics card nvidia. I have dual monitors. Windows 7 64 bit Home Premium, HP Pavilion p6107c Desktop.
View 1 Replies
View Related
Jun 17, 2012
My computer specs:[CODE]I installed windows 7 ultimate 64bit on the hard drive with a different computer. But when I connect it to this, it freezes and stalls at the windows 7 loading/logo screen, and restarts.It is frusrating because i cannot use the computer
View 5 Replies
View Related
Dec 16, 2012
Today when I turned it on it happened... I tried restarting and run repair mode, checked all the fixes and that but still failing... What to do?
View 1 Replies
View Related
Jan 12, 2013
I have installed windows 7 ultimate yesterday on my new SSD. it worked fine after i installed it.. today I started my PC and i noticed my windows is stuck at the Loading Screen.. Already did some research with no luck. I already tried to do Restore Point didn't work.
View 5 Replies
View Related
Sep 6, 2010
I am trying to dual boot Windows 7 Home Premium and Ubuntu 10.04 on my laptop (Toshiba Portege M400). I had Ubuntu 10.04 installed previously but I decided to wipe my hard drive before installing Windows 7. I used GParted to delete all my partition and setup two new ones. I formated the first partition as NFTS for Windows. After that, I proceeded to installing Windows. The first time I tried it, I was successful although I did need to reformat that NFTS partition I had made because it said that the partition table type (GUID) was not compatible. Windows 7 installed fine after that. However, when I try to install Ubuntu, it sees the whole disk as blank. I tried resolving this issue with GParted but that too saw the drive as if it were blank even though Windows 7 was installed. After that, I booted up the GParted Live CD once again and changed the partition table to MS-DOS. My Windows 7 boots up and goes through all the tasks before the first boot up. When it restarts for the first time, it fails to boot; it simply stays on the glowing Windows logo. I've tried formatting the entire disk through the Windows 7 disk and partitioning from there several times and I still get the same results.
View 3 Replies
View Related
Dec 8, 2012
The problem is this. I got a new GPU for my moms computer. She installed it, it worked fine. She played her game for a bit then went to restart the computer and now it wont work. It'll get stuck at the windows logo where it will pulsate but nothing else after (it just keeps doing that).The only other thing we can besides starting windows normally is doing Windows Start Up Repair. We don't get the option to start in safe mode ( I think. We we supposed to hit F8 while on the windows logo to do that?). When we run Start Up Repair, it goes to Windows with some kind of progress bar that just keeps going and going (it's not really a progress bar, more just to show that it's loading something I guess).When we try booting Windows from the disc, we get the same two options "Start Windows Normally" and "Start Windows Repair" or or something like that.The only things we have not tried yet are:*Letting Start Up Repair go for 15+ minutes (we went for 15 minutes but decided to try other things to fix the issue)Taking out the new card and putting in the old card *Going in to Bios and press F5 to set everything to default Resetting Bios (idk how to do this processes but I've reada bit and I can find a guide)We tried press F8, but that just takes us to the boot menu with a list of devices to boot from. If we try to boot from the device with windows on it, it just gives us the options to start Windows normally or run repair.For some reason, we just cannot reinstall windows. We set bios to boot from disc, we even try manually booting from disc via the boot menu, but no go. So booting from disc and repairing or something similar is apparently not an option. What could it be?I am thinking that it is an issue with the hard drive. I don't know. Any thoughts or opinions?I feel really bad at this point. I wanted to help out and I caused this headache Edit: I forgot to mention, I live several hours from her, so I cannot do anything manually myself. Any instructions or tips or whatnot I will have to give over skype
View 4 Replies
View Related
Aug 15, 2012
After the system update last night my computer has been acting weird. It started up at first but then it froze so i decided to hold down the power button to turn it off. after that when i turned it on again i get stuck in the welcome screen.
View 4 Replies
View Related
Sep 19, 2009
I wanted to dual boot Win 7 64 with my vista 32 but after the install completes and the computer reboots it hangs on the Win 7 boot logo and then just stays there until i turn off the power button. It's kinda like the problem when you have a USB plugged in and the boot logo hangs except there's nothing plugged into the comp. Reinstalled again the the same result. When I look at the win 7 drive from vista it looks like all the files are all there but it just keeps hanging on that logo =(. What should I do?
Also when i try and boot into safemode it hangs on "Classpnp.sys"
I've looked elsewhere and seen that people solved this problem by updating bios but I have the latest version of mine =(
I've tried EVERY boot option in F8 to no avail.
View 1 Replies
View Related
Jun 26, 2012
I just got a new computer, custom built nothing on either hard drives, i have a 1tb hard drive and a 64 gb SSD drive. I have a brand new windows 7 oem version, I start my computer up and it gets stuck on a screen.
View 8 Replies
View Related
Aug 22, 2012
I recently upgraded my computers power supply and graphics card to brand new ones. When I oot my computer up, it is now stuck on "windows is starting" screen. When I try to boot in any of the safe modes, I load up to atipcie.sys then my computer freezes and never continues to load the rest of safe mode. When I click repair computer, I get stuck at the Blue windows screen, and as soon as it starts up a cmd box pops up then quickly closes before I could even read it. I also tried loading last working configuration but no luck. Even when I load boot recovery mode, a cmd box comes up quick then closes and continues to be stuck.
View 8 Replies
View Related
Dec 13, 2012
Last night, my computer spontaneously rebooted. When it got to the 'Starting Windows' screen, the animated windows logo never appeared. I rebooted. Tried running System Recovery. This time, the screen is "Windows is loading files..." The progress bar fills up and then freezes.
Tried booting into safe mode. Again, the "Windows is loading files" progress bar fills up and then freezes. Tried to reinstall Windows. Boots from DVD, then the "Windows is loading files" progress bar fills up and then freezes yet again. Have been running Memtest86+ for the last ~9 hours, no issues.
Specs: MSI 790FX-GD70 | AMD Phenom II X4 945 | 4x2GB G.Skill Ripjaws DDR3-1333 | 1x80GB Intel SSD (OS) | 2x1TB Samsung Spinpoint F3 7200RPM HDD (other) | 1x2TB WD Elements external HDD (backup) | XFX RadeonHD 6870 1GB GDDR5
View 7 Replies
View Related
Dec 26, 2012
I can not get my computer to start up. I have gone through the recovery start up, pressing F8 to get to the screen, after pressing system recovery, it just takes me to a blue screen and then back to the page that tells you windows failed to start up normally. I have tried safe mode, the same thing happens and then I tried last known good configuration. That led me back to a blue screen with nothing happening except the lights on the front of the computer blinking white several times, then orange back and forth. At one point it did go to a black screen with the lights on the front blinking, but it did that forever and nothing happened
View 3 Replies
View Related
Jan 12, 2012
If I close my laptop, half the time, the computer freezes after I put in my password. It just gets stuck on the welcome screen with the spinning wheel. It doesn't always happen, but I have to do a hard reset everytime it does. I already set the HD to never turn off, so I am just wondering what else i can do to stop this freezing?
View 6 Replies
View Related
Mar 10, 2011
I share my computer with my father in order to pay off a debt I owe to him, and when I arrived home in the afternoon I was greeted by him, informing me that my computer wouldn't turn on. Generally this would simply be a random issue, or perhaps he turned off the computer and thought it was in sleep (though he's smart enough to tell the difference.). This time, however, was different.I turned the computer on, and to my horror the splash screen shows and then the computer hangs. The only responsive key is Tab, which then shows me the detailed POST description. It tests my memory and shows my processor, etc as well as my drives, but after that it freezes at 'Looking for IDE drives...'. At that point, the only responsive (often it isn't responsive either) key is Delete, and that simply shows a 'prepare to enter Setup' message, and proceeds to do nothing else.I have already tried draining my capacitors (turning my PSU off and holding down the power button), removing and replacing my CMOS battery, continually restarting it, pressing multiple buttons, removing and then putting back my GPU (had to in order to expose my battery) as well as disconnecting and then reconnecting my two drives. I've considered reseating my RAM, but in my past experience doing so has done nothing for previous, similar problems.Both of us have done absolutely nothing that could have damaged the BIOS.
-Specifications-
GPU: NVIDIA GTX 260 Core 216
CPU: Intel Core 2 Extreme QX6850
RAM: 4GB DDR2 PC8500 Corsair Dominator
Motherboard: GA-EP45-UD3P
OS: Windows 7 Ultimate 64-bit
View 2 Replies
View Related
Jan 23, 2013
I have a Dell studio XPS desktop computer with windows 7 home premium service pack 1.The processor is an Intel i5 CPU,12gb of ram,64-bit system. I have noticed that recently when I navigate to different screens the web pages will not load up fast until I move the cursor slightly. If I do not move the cursor the page takes forever to load up. I have run scans for viruses and everything comes up negative. I have also changed out the mouse but it still does the same thing. What would cause this and how can I fix the problem.
View 4 Replies
View Related
Jun 2, 2011
Recently my desktop has started having issues. I purchased it new in january and within this last month when I start it, it gets stuck in the startup screen. When I try to do startup repair it always is unsuccessful. When I view the details it lists this "problem signature 07: Bad patch" I have tried doing a system restore to every point it lists and it says "the instruction at 0xfba8ca53 referenced memory at 0x06e2f90f. The memory could not be read. Click ok to terminate". When I try to enter safe mode it doesn't work either.
View 2 Replies
View Related
Dec 23, 2011
My computer was working fine a couple days ago and all of a sudden got a terrible Trojan that would spam me with random IE ads. So I ran ad-aware and it got rid of the problem. I went to bed relieved but woke up to my computer in a black screen with just a single cursor "_" flashing. I figured it was a fluke and restarted. same problem.
So I decided to open up the computer and check the SATA drive connections. Everything looked fine but the problem still persisted. I decided that it could just be slot number 1 and moved it to slot 3. The computer would start up and go to desktop but all of my icons disappeared and the computer would just hang if I tried to open any file or go on the internet or any program.
Obviously, it was because the SATA drive was now in a new slot?? I'm not sure. But I put it back into slot 1 and went into the BIOS setup and sure enough, it was a "not detected" for slot 1. The main HDslot.
I tried to reset the BIOS using the jumper method and it still just hangs on black screen with cursor "_" flashing...
Specs:
- windows 7 ultimate edition
- Intel duel core @ 3.2ghz
- 4gb RAM
- Asus P5Q-PRO motherboard
- geforce 8800 GTX graphics card
View 14 Replies
View Related
May 30, 2011
I am not trying to install Windows 7, it came on my computer and has been working fine for over a year now. I restarted my computer a few days ago (after it had been working just fine) and now it will not load past the "Setup is Starting Services" screen. I keep getting the error message "Install Windos: The computer restarted unexpectedly or encountered an unexpected error. Windows installation cannot proceed. To install Windows, click 'OK' to restart the computer, then restart the installation." I cannot figure out why it is mentioning anything about installing windows when it came on the computer and has been working until now. I have hit "ok" and it does nothing but come back to the same stuck point. I do not have a disk for this computer as it never came with one. It is a Toshiba Satellite L455D.
View 4 Replies
View Related
May 7, 2012
I am running an Advent desktop PC and its stats are as follows; Intel Core i5-2310 CPU @ 2.90GHz 8GB RAM Win 7 64 bit.The problem I am having is when ever i boot up the computer it shows the Advent logo-screen where I can access the boot menu etc but then it goes to a black screen with a cursor/underscore flashing in the top left... This screen stays for quite a while and I am not sure if it stops because of a key I have pressed or just because it has run its course but after it disappears the computer goes back to the logo-screen for a moment and proceeds to boot up as normal except slightly slower than usual.It is a relatively new computer and it has no problems running at all once the boot up is complete it is fast and as friendly as ever.
View 4 Replies
View Related
Oct 21, 2012
Today I started up my pc and after the BIOS screen (the place where you can press f8-f11 for various options) it went to a black screen with a blinking underscore in the upper left corner and stayed there indefinitely. It did this even after reboot.
I tried using the diagnostic tool and everything it tested passed (including HDD). I did this test twice and the same results were produced.
I also googled for similar problems (one topic mentioned that the op disassembling his computer and physically tapping a chip on the motherboard caused it to work) but I have no experience with taking apart my computer and i do not want to break it accidentally. I did however chance upon a topic advising him to do a CMOS reset which apparently helped that op, so i looked through the various options on the BIOS page. There was one option (f10 I think) mentioning CMOS on its fourth sub-window, so i pressed the reset option but I'm mot entirely sure if I used the right function.
I uninstalled kaspersky pure and replaced kaspersky pure for kaspersky anti-virus yesterday, dont know if this was the cause. I am using windows 7 64 bit.
View 4 Replies
View Related
Feb 13, 2011
Like the title says, my computer is stuck on a black screen.I downloaded an update and was instructed to restart the computer. After restarting the computer it went to a black screen. It won't do anything past that. I've tried starting it in safe mode but always with the same result. I have no idea what to do with this short of taking it to Best Buy to have the geek squad take a look at it and frankly I don't feel like doing that.
View 2 Replies
View Related
Jan 5, 2013
my laptop will not load up. I can get it to the screen where it says repair computer, safe mode and all that. (advance boot options) but anytime I click any off them it goes to a screen where it says I need to put in the windows installer disk. I do not have any disk but I downloaded the repair disc from my other laptop. I put the disk in the computer and restart it and it just goes back to same screen. It does not automatic rebot, or ask me to rebot from disk.
View 2 Replies
View Related
Dec 1, 2011
i recently built a computer and got everything working . Now my problem is that after i shut down my computer for example at night and turn it on in the morning it will always get stuck in the windows 7 logo. I have to turn off the pc and turn it back on once or twice for it to boot correctly. Is there any way to fix this problem? I have windows 7 ultimate 64 bit and i have re-installed it twice already but still get this problem. This only happens when i leave the computer off for a long period of time.
View 12 Replies
View Related
Jul 21, 2012
When i do system repair it comes up with a cmd saying im missing files or something i will post pics if needed.I tried running a program that SIW2 gave to me with the cd and idk what to do.
View 2 Replies
View Related
