I have a Dell studio XPS desktop computer with windows 7 home premium service pack 1.The processor is an Intel i5 CPU,12gb of ram,64-bit system. I have noticed that recently when I navigate to different screens the web pages will not load up fast until I move the cursor slightly. If I do not move the cursor the page takes forever to load up. I have run scans for viruses and everything comes up negative. I have also changed out the mouse but it still does the same thing. What would cause this and how can I fix the problem.
My computer was working fine a couple days ago and all of a sudden got a terrible Trojan that would spam me with random IE ads. So I ran ad-aware and it got rid of the problem. I went to bed relieved but woke up to my computer in a black screen with just a single cursor "_" flashing. I figured it was a fluke and restarted. same problem.
So I decided to open up the computer and check the SATA drive connections. Everything looked fine but the problem still persisted. I decided that it could just be slot number 1 and moved it to slot 3. The computer would start up and go to desktop but all of my icons disappeared and the computer would just hang if I tried to open any file or go on the internet or any program.
Obviously, it was because the SATA drive was now in a new slot?? I'm not sure. But I put it back into slot 1 and went into the BIOS setup and sure enough, it was a "not detected" for slot 1. The main HDslot.
I tried to reset the BIOS using the jumper method and it still just hangs on black screen with cursor "_" flashing...
I'm using Intel Core 2 Duo 2.8Ghz 2GB RAM, Win7 64bit, 160GB HDD, Geforce 9400GT.
Recently my PC is getting stuck for no reason. While browsing, watching a movie, when I leave it idle for a while its getting stuck. Screen is as it was and I cannot move the cursor, keyboard isn't working. Then I restart it manually and go to the option "start windows normally" or something. This happened previously and I thought it has smthin to do with my HDD, but I checked it n re installed win7 64bit. It was working normally for about 3 months and now it started again.
My computer starts to boot up as normal, shows the 4 colored dote resolving to the Microsoft logo followed by the light blue screed with usual Microsoft decal then the screen goes black and all i have is the cursor. the cursor moves as normal but that's it. Ctr-Alt-Del brings up the light blue screen with the usual options and if I select Task Manager it appears but still with a black screen behind.I can reboot in safe mode and I get the normal Windows screen. however my Anti Virus (Bitdefender) will not load. trying a system image restore has produced the same result.
it started over a year ago when I started to get random BSOD messages, after no specific update, installation, or hardware change whatsoever.those usually included "IRQ_LESS_OR_EQUAL". usually after a crash it took some startup attempts to boot successfuly.
more recently crashes followed those BSOD's: "BAD_POOL_CALLER" "BAD_POOL_HEADER" "BAD_SYSTEM_CONFIG_INFO"
since the latest crash, the computer is failing to start - after widows logo appears, I get a black screen with a cursor. NO control afterwards - Ctrl+Alt+Del doesn't work and I all I can do is restart.
I tried:
1. safe mode (all kinds) - still get the black screen with no response
2. low resolution video mode- same
3. Windows Restore, both from the boot options dialog and from the WIN7 installation disc boot - it doesn't run, I get an error message ("the application referenced memory......... .....memory can't be read" )
4. memory check, it ran but I cant access the results.
5. Windows system files checker ('sfc'), via the repair tools command prompt - it doesn't start, says there's a startup repair pending so startup - yet there isn't
6. reset BIOS settings - nothing before the current trouble, at times, I also tried:
- reinstalling drivers for Graphic card, Network card and motherboard - cleaning dust in the CPU cooler - fastening connectors - clean format (that was a long time ago but blue screens appeared even shortly afterwards)
nothing worked....
specs: cpu: Intel I7 motherboard: Asus P7H55-M PRO Graphic card: PNY nVidia Quadro 580 Windows 7 pro
my Acer aspire 4750G uses windows 7 64 bitit boots and get stuck in the log in screen.. I have no password but I have two users, so I have to click on which to log into.the cursor is moving , but when I click on the User, nothing happens.. the cursor is still moving, but there is no indication that the computer is reading.that round moving icon that you see is not there..is there a way to fix this without reformatting? I dont know much about computer troubleshooting and repair
my computer boots up to a black screen with a mouse. The problem is, when I boot from anything or into any option I get this. Safe Mode gets me black screen, so does booting from a Win 7 Recovery disk, everything puts me in a black screen with cursor. At first it will show Windows logo on the screen, with loading bar, then cuts out, and cursor pops up. That's it.Also, when I try to boot normally, it hangs at Windows logo, then flashes a quick blue screen then reboots.
I have a gateway computer that is infected with a virus. I was able to load the computer in safe mode a couple of times before it no longer loaded login screen for my computer. Now when I cut the computer on there is only a black screen with a white blinking cursor. I have the avira rescue cd and have changed the seetings to boot straight from the cd rom but even after running the rescue disc the computer will not allow me to use the (f) function keys. When I press down on any of the (f) function keys there is a beeping sound but no action. I tried to use a windows reboot cd made from another computer but it does not load on the start up like the avira resue disk does.
what could be wrong with my computer i hit the power button and it start and it says start windows normally but when i click on it after is says windows is starting it goes to a black screen with the cursor i can move the cursor but nothing else. it goes to the black screen before it will let me even log on to my computer
After the system update last night my computer has been acting weird. It started up at first but then it froze so i decided to hold down the power button to turn it off. after that when i turned it on again i get stuck in the welcome screen.
I tried to flash drive on another computer it worked fine, but on my desktop it will not..If i turn my dektop on without the flash drive it comes up and says Reboot and Select proper boot device or insert boot media in selected boot device and press a key.If i insert the flash drive it freezes..If i start the computer with the flash drive in, it wont even get to the screen it freezes at the screen that tells me to press f12 for this, esc for that etc etc.This person has the same problem..And I cant boot from my origonal Hard drive because I believe its gone bad, If i start it with that hard drive it says Reboot and select proper boot device, its like it doesnt even recognize it, which im guessing means its gone bad.. But it wont freeze with that hard drive, but I also cant do anything
I just got a new computer, custom built nothing on either hard drives, i have a 1tb hard drive and a 64 gb SSD drive. I have a brand new windows 7 oem version, I start my computer up and it gets stuck on a screen.
I recently upgraded my computers power supply and graphics card to brand new ones. When I oot my computer up, it is now stuck on "windows is starting" screen. When I try to boot in any of the safe modes, I load up to atipcie.sys then my computer freezes and never continues to load the rest of safe mode. When I click repair computer, I get stuck at the Blue windows screen, and as soon as it starts up a cmd box pops up then quickly closes before I could even read it. I also tried loading last working configuration but no luck. Even when I load boot recovery mode, a cmd box comes up quick then closes and continues to be stuck.
Over the night I usually turn off my PSU, this morning, I turned it on, booted the pc normal, and the cursor wasn't moving on the desktop. The mouse itself, was lighten up, and ready to be used. I plugged the USB in and out, and everything were back normal.
I can not get my computer to start up. I have gone through the recovery start up, pressing F8 to get to the screen, after pressing system recovery, it just takes me to a blue screen and then back to the page that tells you windows failed to start up normally. I have tried safe mode, the same thing happens and then I tried last known good configuration. That led me back to a blue screen with nothing happening except the lights on the front of the computer blinking white several times, then orange back and forth. At one point it did go to a black screen with the lights on the front blinking, but it did that forever and nothing happened
If I close my laptop, half the time, the computer freezes after I put in my password. It just gets stuck on the welcome screen with the spinning wheel. It doesn't always happen, but I have to do a hard reset everytime it does. I already set the HD to never turn off, so I am just wondering what else i can do to stop this freezing?
I share my computer with my father in order to pay off a debt I owe to him, and when I arrived home in the afternoon I was greeted by him, informing me that my computer wouldn't turn on. Generally this would simply be a random issue, or perhaps he turned off the computer and thought it was in sleep (though he's smart enough to tell the difference.). This time, however, was different.I turned the computer on, and to my horror the splash screen shows and then the computer hangs. The only responsive key is Tab, which then shows me the detailed POST description. It tests my memory and shows my processor, etc as well as my drives, but after that it freezes at 'Looking for IDE drives...'. At that point, the only responsive (often it isn't responsive either) key is Delete, and that simply shows a 'prepare to enter Setup' message, and proceeds to do nothing else.I have already tried draining my capacitors (turning my PSU off and holding down the power button), removing and replacing my CMOS battery, continually restarting it, pressing multiple buttons, removing and then putting back my GPU (had to in order to expose my battery) as well as disconnecting and then reconnecting my two drives. I've considered reseating my RAM, but in my past experience doing so has done nothing for previous, similar problems.Both of us have done absolutely nothing that could have damaged the BIOS.
Basically what happens: Explorer has stopped working: restart the program.Afterwards, either I can't move my cursor, or the moves very slowly or in different directions but still slowly.The only way I've been able to get out of is by Ctrl Shift Esc Task Manager and then Alt Tabbing my way to process list to kill WerFault.I dug around through event viewer, but this the most recent relevant crash I found.
I can still hear the sound (I was listening to music on iTunes the first time and the second time I was watching a movie on VLC) ctrl+alt+del works, (when I choose cancel, the screen goes blank) I can log off and everything's fine when I log back in. This happened twice within past two hours... when I was listening to music and watching movie in the background... and it happened when I was typing details of a mp3 file's properties...
Recently my desktop has started having issues. I purchased it new in january and within this last month when I start it, it gets stuck in the startup screen. When I try to do startup repair it always is unsuccessful. When I view the details it lists this "problem signature 07: Bad patch" I have tried doing a system restore to every point it lists and it says "the instruction at 0xfba8ca53 referenced memory at 0x06e2f90f. The memory could not be read. Click ok to terminate". When I try to enter safe mode it doesn't work either.
I am not trying to install Windows 7, it came on my computer and has been working fine for over a year now. I restarted my computer a few days ago (after it had been working just fine) and now it will not load past the "Setup is Starting Services" screen. I keep getting the error message "Install Windos: The computer restarted unexpectedly or encountered an unexpected error. Windows installation cannot proceed. To install Windows, click 'OK' to restart the computer, then restart the installation." I cannot figure out why it is mentioning anything about installing windows when it came on the computer and has been working until now. I have hit "ok" and it does nothing but come back to the same stuck point. I do not have a disk for this computer as it never came with one. It is a Toshiba Satellite L455D.
Today I started up my pc and after the BIOS screen (the place where you can press f8-f11 for various options) it went to a black screen with a blinking underscore in the upper left corner and stayed there indefinitely. It did this even after reboot.
I tried using the diagnostic tool and everything it tested passed (including HDD). I did this test twice and the same results were produced.
I also googled for similar problems (one topic mentioned that the op disassembling his computer and physically tapping a chip on the motherboard caused it to work) but I have no experience with taking apart my computer and i do not want to break it accidentally. I did however chance upon a topic advising him to do a CMOS reset which apparently helped that op, so i looked through the various options on the BIOS page. There was one option (f10 I think) mentioning CMOS on its fourth sub-window, so i pressed the reset option but I'm mot entirely sure if I used the right function.
I uninstalled kaspersky pure and replaced kaspersky pure for kaspersky anti-virus yesterday, dont know if this was the cause. I am using windows 7 64 bit.
Like the title says, my computer is stuck on a black screen.I downloaded an update and was instructed to restart the computer. After restarting the computer it went to a black screen. It won't do anything past that. I've tried starting it in safe mode but always with the same result. I have no idea what to do with this short of taking it to Best Buy to have the geek squad take a look at it and frankly I don't feel like doing that.
my laptop will not load up. I can get it to the screen where it says repair computer, safe mode and all that. (advance boot options) but anytime I click any off them it goes to a screen where it says I need to put in the windows installer disk. I do not have any disk but I downloaded the repair disc from my other laptop. I put the disk in the computer and restart it and it just goes back to same screen. It does not automatic rebot, or ask me to rebot from disk.
Since I find it much faster to move the "beam" cursor around with the arrow keys (and CTRL+Arrow key to jump over whole words), I frequently use that instead of the mouse to reposition the cursor, handy if I want to go back a few words and add or change something.
However on many sites, using the arrow keys fails to move the beam, yet the actual input position does change.
For example, I'll press "CRTL+Left Arrow" a few times to jump back three words. On the screen the beam stops flashing but stays put, yet if I start to type the typing starts where the beam should have ended up if it moved properly.
I was watching a football game on firstrowsport.eu and my computer (a hp pavilion desktop) just shut down uncommanded. I waited for it to restart, and after the BIOS screen, it just had a flashing cursor. I used the disc version of PartedMagic to get into my computer and ran the fdisk-l command. [code]
Can't get into windows, black screen with blinking cursor for some reason I can't even get into windows 7, after I get pass the screen that says "asus", my laptop brand, It goes into a black screen with a blinking cursor in the left hand corner like this: Click this bar to view the full image. I'm unable to do anything at that point, it just blinks. I can't even boot into safe mode now, the only think I'm able to get into is the Bios Setup Utility menus and Asus' express gate, which is just a media/internet/gaming/skype thing that doesn't allow .exe files to run. This came factory installed so I don't have a windows 7 disc to run fixes.
When i do system repair it comes up with a cmd saying im missing files or something i will post pics if needed.I tried running a program that SIW2 gave to me with the cd and idk what to do.