Windows 7 Home Premium hangs for a prolonged period of time at the shutdown screen. It normally takes a few seconds only, but it now begins to hang for several minutes at the shutdown screen.
View 3 RepliesI recently got a PC that my office was getting rid of. The PC was in great shape and I was told it worked fine when they gave it to me. They ripped out the hard drive and gave me the machine. As soon as I got it, I put a brand new 2Tb Seagate HDD in. I also replaced the existing RAM (2x1Gb sticks) with 2x 2Gb sticks with the memory speed to match my motherboard. Finally I swapped out the ATI Radeon HD2900XT with a Nvidia Geforce GTX 460. There was a sound card (PCI) I removed as well as a redundant firewire port I unhooked from the Mobo. I then booted and peformed a fresh install of Windows 7 32bit Pro. Everything seemed to be going fine... until I tried to shut down. Windows would freeze on the Shutting Down screen. I mean freeze because the spinning circle would stop and the entire machine was unresponsive.
I read online that pre-Service Pack 1 Windows 7 didn't like multi-core processers and would have issues shutting down, so I updated to SP1 (along with a bunch of other updates). Now when I try to shut down, the Shutting Down screen disappears and the signal to the monitor ends, however the machine stays on. I can hear the fans running and see the lights to the PCI cards still on. Once again I have no option but to hold the power button until it shuts down. One extra note I double checked every driver and they are all up to day. Also when I boot in Safe Mode the PC shuts down fine and I have no problem restarting, just shutting down...
When I try to shutdown my PC it nearly always hangs at the "Logging Off" or "Shutting Down" screen, the only time it shuts down properly is immediately aftwer it has been freshly started. It seems to me that a program or driver is causing the problem.
Dell Optiplex GX620
Intel Pentium Dual Core Processor
4 GB RAM
Win 7 Ultimate
my internet started running very slow about 3 weeks ago. It also takes approximately 2 minutes for my computer to shut down. I am running Windows 7, 64bit, with 6 gb of ram. I ran malwarebytes and it did not detect anything. I cleaned my hard drive with the disc cleaner. I ran microsoft essentials and it did not detect anything. I recently purchased Norton antivirus and ran a complete scan and it found nothing. Every time I shut down the computer it takes exactly the same amount of time to shut down.
View 7 Replies View RelatedI have a dual boot, win7 and WinXPsp3. My XP drive shuts down fine but my Win7 drive has a shutdown delay of about 2 minutes and 15 seconds. No music is playing. my specs are
Desktop:
Drive C: W7 Home Premium 80GB NTFS (Sata)
Drive D: WinXP Pro sp2 80GB NTFS (Sata)
Drive E : Storage 80gb (Sata)
[Code].....
Is there any registry hack that can allow me to shutdown windows after "x" mins whenever I click shutdown (or press shutdown button) my system?
View 9 Replies View RelatedMy Windows 7 takes nearly 3-4 mins during shutdown,?
View 2 Replies View RelatedI have a problem with my laptop (A Sony Vaio VPCEB4J0E) Basically, whenever I tell it to shut down, it doesn't actually do so and only closes Windows explorer so I'm left looking at my desktop whilst nothing happens.
View 4 Replies View Relatedi've recently done a fresh install inc SP1 of win 7Pro x64 and now the pc almost constantly hangs on shutdown.everythings up to date driver wise etc.I was aware of this problem on my older quadcore machine but had it very infrequently, this happens almost constantly on my new one.Found a hotfix which i tried to install but had a warning say that "not applicable to my computer", i then realised that the problem was addressed in SP1.
View 6 Replies View RelatedI have been having this random problem where my computer fails to shutdown every time. I know it is a general question but I have no idea why this happens. The only thing I remember changing was my sound card, but it is disabled in the device manager so I don' think that is the issue.Is there any way I can log events to see why it is crashing?
View 5 Replies View RelatedI just bought a new Lenovo Thinkpad T400. This is my 5th Thinkpad. It is a 2767-P1U. It is running Windows 7. I have the Lenovo drivers installed and have upgraded them to the latest available. I have also got Norton Anti-Virus 2011 and Office 2007 Professional. Windows is fully updated as well.The processor is: Core 2Duo T9400 with 2GB Memory.I am having issues getting the machine to shut down from the "Start > Shutdown" command. It continues to the shut down splash screen and has the rotating circle "hourglass" and stays that way. There appears to be little to no hard drive activity and it just sits there. After about 5 minutes of waiting, I am forced to use the actual power button to hard shut down the system.In order to investigate possible causes to this problem I began by determining what programs are running at start up in MSCONFIG. Aside from a few IBM applications, Windows and Norton services nothing seems to be in there that should cause any issues.
I checked the Event Viewer and can see that there seems to be some issues with "miniport" drivers from AMD. I thought this may have something to do with the video drivers as they are ATI (now AMD) and removed the extra Catalyst stuff and left the drivers. No change.I removed the Anti-Virus software completely. No Change.I tried disabling the network adapters, including Wireless. No change.One thing is certain. If I start the computer and sign into windows and then immediately click Start>Shutdown, it goes down in 10 seconds. Is this a power management driver issue? A video driver issue still? Some other "miniport" issue? Something I can't see?
Windows 7 Professional x64 edition is installed on a computer. During the installation, every time it went to restart the system would hang immediately; I had to do a hard reboot to continue the installation.Now Windows 7 is installed, and still hangs on reboot. When I choose Restart, the system shows the shutdown screen, goes black, and hangs. After some time waiting it never reboots and I never see the BIOS screen. However, if I choose "shutdown", it works perfectly.Also, when I force it to reboot, the system does NOT give me the message that it wasn't shut down correctly. I've reinstalled the system twice. All drivers are installed correctly, and Windows is completely up to date. I even updated the BIOS to the current version.
View 2 Replies View RelatedOne of the computers in the office where I work hangs when the user shuts down in the evening. The error dialog says there are two processes still running, and the title bar of the dialog says "explorer.exe error". The message in the dialog says something like "The instruction at "0xXXXXXXXX" referenced memory at "0xXXXXXXXX", The memory could not be "written. Click OK to close." There is an OK button and when you click it, the computers finishes it's shutdown with no further hang up. Windows explorer is the stuck process shown. I've done a little research on it and some of the suggestions are to clear the temporary internet files, which I did, but that didn't help and I wonder if they were thinking IE and not the Windows explorer which is different.
View 4 Replies View RelatedThis is starting to drive me nuts sometimes. I remote into my desktop at home from work sometimes and depending on applications, when I go for a reboot or shut the PC down, it hangs and I can't remote back in. A few days ago I waited 5 hours and had to go home to click "Force shutdown" on the prompt that Windows 7 had waiting for me.
View 4 Replies View RelatedI just installed a retail copy of win 7 on my laptop and have been experiencing some issues. At first everything worked fine but out of the blue my desktop/folders have not been auto-refreshing. Whenever I try to delete or create a new folder I have to manually refresh to the folder in order to view it. When shutting down my laptop it takes 5+ minutes and when my desktop is loading after booting up the laptop it takes several minutes for everything to load and for the win 7 chime.
Finally, it won't allow me to update. When I try to use the windows updater it hangs for a while on "creating restoring point" (which may be normal) but then permanently hangs on installing update 1/16 at 0%. If I try canceling the update nothing happens and even when I try to shut down the laptop it attempts to install the updates but hangs on update 1/16.
From researching these issues I've realized that the auto-refresh problem is not uncommon and has something to do with a network. This may be unrelated but these problems only started to occur when I was transferring pictures via a USB stick.
I have a fresh install of Windows 7 ultimate 32bit that crashes with a blue screen after a few minutes on startup.i have installed it on my new 1.5 TB Samsung hard drive.I already have windows XP running on my older hard drive (which im running now) without any issues.I have completed disk checks along with emmory checks and everything is in order.
My system specs are:
System Summary
Processor
Name : Intel Pentium III Xeon processor
Speed : 2657 MHz
[code]....
I've had windows 7 ultimate 64bits for a year now on my brand new pc, and today he starts and slowly ... around 35 mins to show desktop and will take forever if i click anything. I restarted in safe mode and it works perfectly, there are no exclamation points on the device manager. The only major change i have done but not recently was my video card from Nvidia to raddeon saphire.
View 1 Replies View RelatedI was handed a computer to try and clean up yesterday. It is an 2 GHZ AMD 64 bit CPU running windows 7 64-bit with a whole 1 GB of ram. Yes I said 1 GB of ram, I cringed too. I've got the owner convinced to upgrade that to 4GB and he's gonna go with a dual core processor while he's at it which should make a ton of difference.In any case, on to the problem. The windows install was pretty bogged down, somewhere around 80 running processes and no free physical memory. The machine actually booted to the desktop fairly quickly but wouldn't respond to anything due to all the running processes. I went through the task manager and killed enough tasks that I could navigate. I ran ccleaner on it to clear some junk. I went through the startup processes and cleared all the non-essentials. I went into the add-remove programs and removed the junk. I ran ccleaner again and cleared up the remnants and even ran the registry cleaner. I ran malwarebytes and an AVG virus scan and was actually surprised to find the system very clean. It's whole problem seemed to be an absurd amount of "legit" startup items. After I got it all cleaned up to around 40 running processes I defragmented the drive using defraggler and manually bumped the size of the swap file up to 1.5x ram.
The system is now running great, well as great as it can with only 1 GB of ram. All except for one problem.... when the machine boots up it comes to the screen where you can select a user, I select the user and then it hangs on the welcome screen for as much as 20 minutes before it goes on. It didn't take more than 20 minutes to boot before I started!How can it possibly be booting slower now with an optimized drive, larger swap file, and 0 extra components running at startup?
yesterday I was using my computer and it was working fine. I turned it off (like I do every night before bed). And when I turned it on again today it got stuck at the Welcome screen. I thought that maybe it was just a one time problem (most of my computer problems are) so I shut if off manually using the power button and the booted it back up again but it got stuck at the welcome screen again. So it is off now. This computer is homebuilt and it is almost 1 year old.
Specs:
i5 2400
AMD Radeon HD 6850
8GB RAM
Asus P8Z68-V Motherboard
If I use Remote Desktop to access a Windows 7 system. End RDP, and then return to log on locally the welcome screen hangs. Making a reboot necessary. Re-trying the RDP session also does not work, with a long error message starting:-
"The task you are trying to do can't be completed..."
I just got Windows 7 home premium. I can't figure what to do. I start windows and as long as I am using it stays open. But if I do nothing for about 2 min. It goes back to where I sign in to Windows again. Then I have to enter my password again,to get back in to Windows again. There must be a setting for this, but I can't find it.
View 3 Replies View RelatedI have a Dell inspiron 1545 with Windows 7 Home Premium x64. I recently reinstalled AutoCAD 2012 Student Edition on my system (I had this installed earlier but I'd uninstalled some of its components).
Since reinstalling, the Windows Logon screen takes around 3 minutes to appear after the Windows logo disappears after booting. The only thing on the screen is the cursor. Pressing ctrl + alt + del does nothing. I can only move the arrow cursor around for 3 minutes.
Restoring the system to a point before I'd reinstalled AutoCAD fixes the problem, but reinstalling it brings the problem up again.
My windows 7 hangs up after logging in. In safe mode with networking, it is running perfectly. I have had this problem intermittantly, and the last times I got a message that my video driver as stopped working and is recovering. My computer would work fine for about a month or so and then it would happen. I have downloaded latest drivers from nVidia, and have also disabled everything except Microsft items on Startup.The errors I get in the event log is as follows :DCOM got error "1084" attempting to start the service WSearch with arguments "" in order to run the server:{7D096C5F-AC08-4F1F-BEB7-5C22C517CE39}DCOM got error "1084" attempting to start the service ShellHWDetection with arguments "" in order to run the server:{DD522ACC-F821-461A-A407-50B198B896DC}DCOM got error "1084" attempting to start the service EventSystem with arguments "" in order to run the server:{1BE1F766-5536-11D1-B726-00C04FB926AF}The driver detected a controller error on DeviceHarddisk3DR3.The following boot-start or system-start driver(s) failed to load:
discache
spldr
Wanarpv6
The following boot-start or system-start driver(s) failed to load:
AsIO
AsUpIO
discache
spldr
Wanarpv6
I performed a clean boot by disabling everything except microsoft stuff at startup. The item I eliminated was adobe reader speed launcher. I can not see it in my programs or features so I can uninstall it. With it disabled..my computer stopped hanging.
I've got new pc with Windows 7 Home Premium x64. It sometimes hangs on shutdown screen. And then I hold power button (I don't have reset button on my new case) and see BSOD.
View 7 Replies View RelatedI just finished installing updates from microsoft and restarted my computer, it boots to a blank windows 7 screen without my username and a moveable mouse, i also ran diagnostics everything passed,,and it wont let me boot to safe mode, i press f8 and it just trys to boot like normal
View 1 Replies View Relatedihave a dell optiplex 380 runing windows 7.after supplying myusername and passwordit hangs at a welcome sceen for ever.
View 3 Replies View RelatedI have a problem with Windows 7. I restarted the computer to finish installing updates, and when the welcome screen came up, the computer gets stuck there. I tried restarting the computer again, and it did the same thing. This started happening after installing updates. Safe mode works fine so I don't know what to do.
View 1 Replies View RelatedI have an HP desktop with an Asus MB #M2N68-AM SE2.Sometimes it boots normally but lately it may be as long as 10 to 15 minutes to get past the Windows l7 flashing logo.
View 5 Replies View RelatedNot sure whats going on at first I thought maybe had some malware hidden so a ran an eset scan AND a malwarebytes scan, neither found anything. Usually it would take about 20 seconds or so from the time I turn it on to the log in screen. Now sometimes I'll turn it on and it will stay at the loading windows screen sometimes a couple minutes to 5 mins then make its way to the log in screen.
View 4 Replies View RelatedI've just did a clean install of Windows 7 to my SSD 2 weeks ago.
Recently, abut 4-5 times a week, my computer will hang at the Windws 7 logo screen. the part where the logo glows but it stops there. I tried the startup repair after I forceshut the computer, but no results.
I tried sfc / scannow but there's nothing wrong. I read that doing chkdsk on a SSD has no effect right ?
When I run the Windows 7 Home Premium OEM disc I get past "loading files" and then freeze on "starting windows". I see 4 little colored balls in the center of the screen (guessing the start of the MSFT logo) and then everything freezes.
Here's what I've got:
Monitor: Samsung T260HD 25.5in Rose/Black LCD w/ATSC
HDD: 2 x Seagate 1.5TB Serial ATA HD 7200/32MB/SATA-3G
Memory: Corsair Dominator 6144MB PC12800 DDR3 1600MHz (3x2)
DVD: LG 22X DVDRW SATA
Motherboard: ASUS P6TD Deluxe Intel X58 Socket LGA1366 MB
Power Supply: Corsair 950w 80 Plus Power Supply
GPU: 5850 is backordered, so am using an old Nvidia 6600 GT to attempt to install Windows - connected to monitor with DVI cable
OS: Windows 7 Home Premium OEM
I've done lots of research and tried:
1. Using a PS2 keyboard/mouse
2. Disabling USB in bios
3. Disabling just about everything else in bios
4. Tried w/ 2MB, 4MB and 6MB ram
Any help or suggestions would be greatly appreciated.