Free HDD CLoning Software?
Jan 31, 2012SImple question does anybody no of the best free HDD cloning software for Windows 7 ?
View 3 Replies
ADVERTISEMENT
Cloning HD In Windows 7?
Sep 11, 2011I am running W7/64 in a Dell Inspiron. I discovered that Windows Backup did not give me back my folders when I needed them and I don't want to use it again. In all previous OSs I have used Apricorn/Acronis which backed up from BIOS and produced an external HD copy which would boot automatically and restore the complete disk, or one could select folders and files to move back. Simple and elegant.
i searched for "clone" information in "Windows 7" and got information mostly for other XP, Vista, etc. But I did see that the free XXCLONE was mentioned and I would like to hear from anyone who has used XXClone in Windows 7 to report on its value, problems, etc.
Cannot Log On After Cloning Hard Disk
Jun 26, 2010I migrated from a 250 GB HDD to a 500 GB. I had around 230 GB of information wich I really didn't want to loose, so I cloned the old HDD to the new one with the software Acronis True Image Home.
Apparently, the cloning succeds, but when I disconnect the old Disk and try to boot from the new one, when I log on I get stuck in "preparing your session".
Windows 7 Corrupted After Cloning
Aug 12, 2010I'm transfering all my data to a new hdd using gparted. My ubuntu partition went fine but my windows 7 is corrupted or broken. I tried twice to clone the partition but the new one is behaving oddly. url...first when windows starts theres nothing on the screen, i have to ctrl+alt+del and create a explorer.exe process, then I can't navigate because any attempt to enter "computer" or any explorer windows returns a warning with "no such interface supported". All my data is still there but is currently unusable.I really want to clone it because reinstalling everything is going to be too much time consuming.
View 9 Replies View RelatedATI 3870 X2 And Cloning The Monitor. HOW!@??
Dec 1, 2009I have a 22 inch monitor on my desktop. I also have a 46 inch Samsung LCD HD TV. I want to clone my display so what is seen on the monitor, can also been seen on the TV across the room.
Extended desktop works but I need to be able to CLONE it. I can't for the life of me figure out how to do this on Windows 7. Any help would be great.
Video card in question is an ATI 3870 X2 with 3 DVI outputs and one HDMI output.
Add 2nd HDD - Swap Allocations After Cloning
Jan 25, 2012I installed a 2nd hard drive (presently drive B: ) it is initialized, volume prepared and ready to go. The plan is to clone Drive C: to it. Then making it the primarily C: drive. The old C: Drive will then be changed to Drive B.
View 4 Replies View RelatedCloning From Raid O To Single Ssd
Sep 25, 2011I bought a intel 320 160g gen3. Looking to clone my raid o to it. I may be over simplifying it but can't I just install the SSd in the 3rd Sata spot clone to it from the raid then just change the bios to boot off of the SSd and change it to ahci? Then keep the raid o as is for storage of games and such. I am not putting any important data on the raid o purely a gaming computer. Fresh instal isn't an option btw.
View 3 Replies View RelatedCloning Windows 7 On SSD To Larger One
Jul 27, 2012I originally did a fresh install of Windows 7 onto an SSD, which has now become too small. Using the Windows 7 utility today I created a system image onto an external standard hard drive. I'd like to restore the image onto my new, larger SSD. Is preparation such as alignment needed, or does going from one SSD to another take care of that? I'm assuming I can resize the active partition using Disk Management afterwards.
View 5 Replies View RelatedHow To Repair Problems After Cloning A Hdd To A Ssd
Jun 19, 2012I've cloned my 320GB HDD to a 128GB SSD. Before you think I lost my mind let me state, I've used "less" than 25% of that 320GB HDD.
Now, my problem is this. When I boot up the cloned SSD in my new] laptop it will not bootup and says, it does not detect a bootble disk. I've tried the repair/restore three times with no success. Does anyone know for certain what I might do to repair this issue and get it to bootup correctly?
Cloning Windows 7 Disk Signature?
Sep 19, 2011I have used a linux live cd to create an exact image copy of a 320gb hdd on an external HDD by doing:
root@ubuntu:/media/backup# dd if=/dev/sda of=2011-09-19.img bs=32256
9922896+0 records in
9922896+0 records out
320072933376 bytes (320 GB) copied, 8851.48 s, 36.2 MB/s
Windows 7 ultimate is installed on that HDD. I just want this image so if the hdd fails i can buy a new hdd and restore the image to the new hdd.However is there some disk signature problem if i do this? Because the new hdd would have a different disk signature from the one of the old hdd. I have read that this can cause an error message during boot along the lines of 'The boot selection failed because a required device is inaccessible.'. Do i have to manually edit the MBR using a hex editor to match the new hdd? How do i even find the correct signature of the new hdd?
Cloning: Destination Drive Not Being Partitioned?
Jul 22, 2012I am trying to use Seagate discwizard, to clone my hard drive to another. When I went through the process, the new HDD received only the C partition and not the D.
I really don't want to format the hdd and reinstall!
Hard Disk Cloning Software?
Aug 17, 2009Can anyone tell me is there any Hard Disk Cloning program similar to the Seagate Disk Wizard or Norton's Ghost that is compatible with Windows 7I tried using the Seagate Disk Wizard which I'd been using succesfully under WIN XP PRO and it creamed my backup HD and I had to reformat itPerhaps there is a Windows 7 version of SDW available or coming soon
View 9 Replies View RelatedDifference Between Cloning And System Imaging?
Nov 25, 2012what is the difference between cloning and system imaging?
View 9 Replies View RelatedCloning Dual Boot Machine?
Sep 14, 20101. I have a FUJITSU MHZ2160BH G2 2.5 ATA Hard Drive which is an moving parts hard drive. Id like to replace this with a Solid State much large hard drive. Are all 2.5 Hard Drives the same in terms of the generic size? I.e. do I simply just screw the back of the laptop, take out the old and put in the new?
2. I have a three partitions that I would like to clone. I have a dual boot, Windows 7 and Ubuntu laptop with shared hosting. Is Clonezilla the best for this do you think? Its a little complicated in that Id like to copy the existing hard drive and then in the new hard drive increase the partitions by 15 gig each - and then copy the 3 partitions in.
Cloning Apps To Handle SSDs?
Sep 27, 2011I have a system that I'd like to clone to an SSD. The source disk is an HDD that is currently using two partitions. I'd like to just move the C partition to an SSD, but my only question is, what cloning apps would allow the SSD to be recognized properly, or would Windows 7 pick up the fact it is an SSD drive and adjust the OS accordingly, including enabling TRIM.
If it matters, the SATA controller is already set to AHCI, and the target drive is a Crucial C300.
Forgot to mention, I had been using Partition Wizard 7.0 (bootable iso) in the past, but never with an SSD.
Post Cloning Of OS Hard Drive
Oct 15, 2011I have on my laptop (a thinkpad, from Lenovo) Windows 7 Professional, obtained via something called "MSDN Alliance" and my university. A few weeks ago, I finally had the opportunity to upgrade my hard drive. Thus, I placed the new disk in a USB case, plugged it in via USB, and performed a disk clone via a software from a company called EASUS. I then removed the old disk, placed the new one in its location (that is, inside the laptop), and removed the USB equipment. Good as new, I though. And everything appears to be working fine -- except the "nag screen" that seemingly randomly pops up out of nowhere and tells me that I am using a (I don't recall the text exactly at this moment) less that legal/legitimate installation of Windows. I can check if Windows has been activated -- and it has (of course, I did this after having installed it) (i.e., on the "old" disk), I have tried searching for solutions, however I only find issues when similar clonings have changed the drive letters.
View 9 Replies View RelatedBoot Failure During Cloning Process?
Jun 28, 2011we are attempting to upgrade the harddrive in an asus eeepc 1005ha from 250 Gb to 750Gb. we purchased "Disk Director" by acronis and are using the cloning feature.
everything seemed to go well until we installed the new drive and it would not boot. the original drive was reinstalled and a second attempt was made to clone it.
the cloning process includes a reboot of the computer to start cloning. it would not boot. a screen comes up the says "windows failed to start. a recent hardware or software change might be the cause..." it then says that we need to use the installation disc and the repair computer feature.
the repair window on the disc will not come up, what starts is the recovery utility which reinstalls the OS and erases everything else.
Cloning A Laptop Hard Drive And Using New Hardware?
Sep 7, 2012I've got a laptop with a piece of really expensive software that is not transferable. As this software has been upgraded over the years, it has required more system resources in order to run smoothly. I am running Windows 7 UltimateIs it possible to clone the laptop's hard drive onto another one and place the new hard drive into a computer with better hardware???What would be the best software for this or is it ok to just use Windows 7 System image utility?
View 6 Replies View RelatedWindows 7 64 Bit Cloning On To Blank Hard Drive
Jul 29, 2012I have this current set up on my computer: 250Gb HDD ( C drive) - contains windows 7 64 bit OS, steam and other files. 360Gb HDD ( D drive) - Partially deleted and defunct windows vista. Some games and files on.
I recently purchased a 3Tb internal HDD, and wish to create the following setup:
3Tb internal HDD (C Drive) - contains the 250 and 360 GB HDD's cloned onto it. 250 and 360 Gb HDD's - Completely wiped and used for backup and storage.
I would also like the 250 and 360 Gb HDD's to be recognised seperately, AS IF they were seperate drives, while remaining on the same 3Tb HDD.
I can only use free software. I also do not want a RAID setup.
Cloning C Drive And System Reserved Portion?
Dec 26, 2012I installed a new ssd drive and cloned my c drive onto it. It also cloned my system reserved partion [about 25 megabytes]. I then, at a later date, cloned my c drive [now my new ssd drive] again back to my old primary drive so that i have an up to date copy of my primary drive. But it also cloned my system reserved partion. Can i delete some of these system reserved partions. I now have 3 of them! It makes my computer look very untidy. What ones should i leave or do i need to leave them all?
View 1 Replies View RelatedExtra Used Space After Cloning A Drive With Acronis
Jan 15, 2013I have just cloned my d: drive, 500 gb to a new 1 terabyte drive f:
drive f: has 49 gig more used space then cloned drive d: users on drive f: is 39 gig larger than users on drive d: the d: drive also has around 50 gigs less used space.
all the other folders are the same size, so not only have I cloned, somehow an extra 49 gb to the f: drive but 10 gb seems to have 'gone'! I used Acronis True Image WD Edition and everything appeared to go well. I don't want to format my other drive as extra storage until I have some idea what has happened.
Cloning C Drive And System Reserved Partition?
Jan 7, 2012I installed a new ssd drive and cloned my c drive onto it. It also cloned my system reserved partion [about 25 megabytes].I then, at a later date, cloned my c drive [now my new ssd drive] again back to my old primary drive so that i have an up to date copy of my primary drive. But it also cloned my system reserved partion. Can i delete some of these system reserved partions. I now have 3 of them! It makes my computer look very untidy. What ones should i leave or do i need to leave them all?
View 1 Replies View RelatedCloning A Hard Drive With Windows 7 Installed?
Jun 11, 2012My company clones hard drives for deploying our software (each software comes with a new computer and a new windows license). We clone the drive to avoid installing the mother board drivers, windows updates, sql server, etc etc each time. This worked great with Windows XP but with Windows 7 we get a boot error on the clone: "Windows failed to start. A recent hardware or software change might be the cause. To fix the problem..." We are a small company and it really is a pain to re-install everything for each new release we do.
View 4 Replies View RelatedWindows Won't Start After Cloning Hard Drive
Feb 1, 2011i just cloned the OS hard drive in my computer from an 80GB to 160GB (both IDE) using acronis true image enterprise edition.
the clone process completed fine, but when i try to start the computer with the new hard drive plugged in (power and data cables disconnected from the old drive) i get the 'disk boot failure, insert system disk and press enter' message when the OS is supposed to startup.
i booted to the windows 7 OS disc and chose the repair option which detected that there was a startup issue with the disk and apparently fixed it, but when i restarted the computer i still get the same error message. i also used the startup repair option from the windows OS disc but it didn't detect any issues.
the interesting thing is that i can boot the new hard drive while the OS disc is in the DVD drive, but if i take it out i get the message again. i've also tried changing the jumper settings on the hard drive (master/single to cable select) but that didn't make a difference.
No Success With Cloning Hard Drive With Norton Ghost
Sep 16, 2012I want to clone my existing laptop hard drive to a hard drive that I have encased as an external hard drive. My current HD is in two partitions - C: and D:. Norton Ghost told me that I would have to copy one partition at a time. Fine. After I copied C:, I went back to copy D:, but before beginning it says - warning/any existing data on the destination drive would be deleted. So how am I supposed to move one drive at a time? I don't want multiple partitions on my new HD if I can help it.
I went ahead and began copying D: onto my external drive, and when it was done, I now can't see that drive in Windows Explorer. In Disk Management I see the drive, but it looks like there isn't any data on it from the amount available. So it looks like I"m back to square one.
Cloning 6 Identical Pc's From One Reference Pc With Windows 7 Home Premium
Apr 18, 2012I bought 6 identical win 7 tablet pc's. (Acer Iconia W501) one for each of us in the famliy. They come with a lot of crapware and the initial startup - process and cleaning took forever. Now my neighbor want the same setup. All the computers are exactly identical. Before we had Windows XP machines and by using the cloning software from Easeus I took ,from just one of the pc's, a complete Cartion sector copy to an external USB harddrive. Then using a easeus boot cd on any of my other identical XP machines I could simply clone this single copy back to any of the identical xp machines, and they would work fine. The question is then : Is this possible with Windows 7 home premium machines ? They all have their seperate windows license, so will 6 identical cloned machines be able to work. Can windows "feel" that it is not the original windows it came with, but the system software from its "sister". I am reluctant to just try it out, since none of the new tablets came with a Windows 7 install disc. Once im a through the startup cloning, can I rely on this one copy to be enough for future rescue-clonings ? or do I need to take a clone of each pc?
View 2 Replies View RelatedCloning Windows 7 Partition To External HDD W/ Mac OS Extended Format
Nov 10, 2012I recently switched from a Mac to a PC. I cloned my system partition of my PC to my external hard disk, and I only realized later that the external HDD was in a Mac OS extended (journaled) format. I thought I would have to format that partition as NTFS and re-clone afterwards. I tried to remove that partition using Disk Utilities on my Mac but got an error message. Surprisingly, though, when I connected the external HDD to my PC, I can access that partition under My Computer, and when I open Disk Management that partition is listed as NTFS.
1) How can I tell if the cloned partition on my external HDD is ok?
2) Should I reformat it and start from scratch instead?
3) If so, should I be making an image OR a clone of my system disk (so that I can boot from my external HDD and restore my system if my internal HDD fails)?
Windows 7 Fast Cloning And Booting From Multiple Partitions?
Jul 21, 2011So what I do now is:1) Delete "DosDevicesC:" in "HKEY_LOCAL_MACHINESYSTEMMountedDevices" and some other DosDevices that will have an other letter booting the clone.2) Using the free MiniTool from partitionwizard.com, I delete a partition I don't need anymore and clone the one running in it. PS: PartitionWizard will reboot and clone it unless I copy an other not active partition (previous clone) which can not have been booted yet so "DosDevicesC:" is still absent.3) Now I need to run "bcdboot f:windows /s f:" in a cmd/dos-window or batchfilewhere "f:" is the new created clone. Or use EasyBCD.4) Then I also use the free version of boot-us.com to be able to hide and protect the other not needed clones or original partition when booting and using a clone.
So I don't really need the BCD bootmanager from Windows 7. It gives only more things do to to prepare the cloned partition. I even don't need the "DosDevicesC:" in the registry, because I need to take it out before cloning. Is there a way to skip or delete the BCD and boot into the only not hidden active partition called C:, which will have any other serialnumber?Is there a way to keep "DosDevicesC:" out of the registry or change it after making a clone-copy. Maybe be able to change the registry from a non active partition with a simple batchfile. Or maybe even have "DosDevicesC:" be deleted everytime when windows is booting before it is automaticly been rewritten into the registry with the active partition?
Cloning To Western Digital External Hard Drive
Jan 15, 2013i've been asked to set up 6 brand new Dell laptops bought for my software engineers in the industy - i have been given a 7th Dell laptop same as the other 6 which has had all the required software needed by our engineers for the machinery programing process installed on it - i've also been given a 1TB western Digital {USB connected} external hard drive for cloning the software and transfering it on to the other laptops, so this afternoon i cloned the 7th laptop with all the software on it using system back up - creating a system image file on the external hard drive, but when it came to transfering this image on to the other laptops, i thought i'd beable to restore {set up the C: drive} the new laptop from the file path E: {the external hard drive path} but it doesn't have the option {E: drive or USB input or external drive} only system restore/back up disk or network path, i can't use the network path as the company has access/permission,firewall blockers that basically stop our engineers laptops from working on customers sites when online, which kind of stops any work from happening, and is why the company.
View 6 Replies View RelatedCloning Program Drive And Data Drives From XP To Windows 7 Laptop?
Sep 28, 2011I am trying to moved everything---program files as well as data files---from one laptop to another. The source is XP, the destination Windows 7 Home Premium 64. From what (little) I understand, most imaging programs clone everything, including the XP register and boot drive. But how can you then boot the Windows 7 machine to run the programs that were originally instaled in XP?I know I can just drag over the data files and re-install all the software, but I am not sure I will live long enough to complete that task.
View 2 Replies View RelatedNew Disk Drive - Cloning One Partition Of Multi-part Drive?
Aug 13, 2012I have a generic System 7 64 bit system with a 1 TB SATA drive. It has one hard drive which I have partitioned into 4 partitions, with C: being where I put all the system software. The board has mulitple SATA ports.Change considered: cloning the C: partition onto a new SSD so that I can get the performance boost of an SSD. There are some heat problems with existing hard drive so I probably need to change it out, so I would also like to clone the D:, E:, and F: partitions to a new hard drive.I have cloned a single physical drive to another physical drive, and the software (Ghost, or the like) usually handles it ok, so that all I need to do is adjust some partition sizes, and then disconnect the old hard drive and everyting is good. This includes cloning a single hard drive with multiple partitions to being cloned to a new single hard drive with identical numbers of partitions.Compared to my prior experience, is there something different about cloning one partition only vs cloning the whole drive. My proposed plan is:
1) Install SSD
2) clone C: to SSD only
3) clone D: E: F: of old drive to new drive.
4) remove old drive.