Cloning A Laptop Hard Drive And Using New Hardware?
Sep 7, 2012
I've got a laptop with a piece of really expensive software that is not transferable. As this software has been upgraded over the years, it has required more system resources in order to run smoothly. I am running Windows 7 UltimateIs it possible to clone the laptop's hard drive onto another one and place the new hard drive into a computer with better hardware???What would be the best software for this or is it ok to just use Windows 7 System image utility?
View 6 Replies
ADVERTISEMENT
Oct 15, 2011
I have on my laptop (a thinkpad, from Lenovo) Windows 7 Professional, obtained via something called "MSDN Alliance" and my university. A few weeks ago, I finally had the opportunity to upgrade my hard drive. Thus, I placed the new disk in a USB case, plugged it in via USB, and performed a disk clone via a software from a company called EASUS. I then removed the old disk, placed the new one in its location (that is, inside the laptop), and removed the USB equipment. Good as new, I though. And everything appears to be working fine -- except the "nag screen" that seemingly randomly pops up out of nowhere and tells me that I am using a (I don't recall the text exactly at this moment) less that legal/legitimate installation of Windows. I can check if Windows has been activated -- and it has (of course, I did this after having installed it) (i.e., on the "old" disk), I have tried searching for solutions, however I only find issues when similar clonings have changed the drive letters.
View 9 Replies
View Related
Jul 29, 2012
I have this current set up on my computer: 250Gb HDD ( C drive) - contains windows 7 64 bit OS, steam and other files. 360Gb HDD ( D drive) - Partially deleted and defunct windows vista. Some games and files on.
I recently purchased a 3Tb internal HDD, and wish to create the following setup:
3Tb internal HDD (C Drive) - contains the 250 and 360 GB HDD's cloned onto it. 250 and 360 Gb HDD's - Completely wiped and used for backup and storage.
I would also like the 250 and 360 Gb HDD's to be recognised seperately, AS IF they were seperate drives, while remaining on the same 3Tb HDD.
I can only use free software. I also do not want a RAID setup.
View 1 Replies
View Related
Jun 11, 2012
My company clones hard drives for deploying our software (each software comes with a new computer and a new windows license). We clone the drive to avoid installing the mother board drivers, windows updates, sql server, etc etc each time. This worked great with Windows XP but with Windows 7 we get a boot error on the clone: "Windows failed to start. A recent hardware or software change might be the cause. To fix the problem..." We are a small company and it really is a pain to re-install everything for each new release we do.
View 4 Replies
View Related
Feb 1, 2011
i just cloned the OS hard drive in my computer from an 80GB to 160GB (both IDE) using acronis true image enterprise edition.
the clone process completed fine, but when i try to start the computer with the new hard drive plugged in (power and data cables disconnected from the old drive) i get the 'disk boot failure, insert system disk and press enter' message when the OS is supposed to startup.
i booted to the windows 7 OS disc and chose the repair option which detected that there was a startup issue with the disk and apparently fixed it, but when i restarted the computer i still get the same error message. i also used the startup repair option from the windows OS disc but it didn't detect any issues.
the interesting thing is that i can boot the new hard drive while the OS disc is in the DVD drive, but if i take it out i get the message again. i've also tried changing the jumper settings on the hard drive (master/single to cable select) but that didn't make a difference.
View 9 Replies
View Related
Sep 16, 2012
I want to clone my existing laptop hard drive to a hard drive that I have encased as an external hard drive. My current HD is in two partitions - C: and D:. Norton Ghost told me that I would have to copy one partition at a time. Fine. After I copied C:, I went back to copy D:, but before beginning it says - warning/any existing data on the destination drive would be deleted. So how am I supposed to move one drive at a time? I don't want multiple partitions on my new HD if I can help it.
I went ahead and began copying D: onto my external drive, and when it was done, I now can't see that drive in Windows Explorer. In Disk Management I see the drive, but it looks like there isn't any data on it from the amount available. So it looks like I"m back to square one.
View 5 Replies
View Related
Jan 15, 2013
i've been asked to set up 6 brand new Dell laptops bought for my software engineers in the industy - i have been given a 7th Dell laptop same as the other 6 which has had all the required software needed by our engineers for the machinery programing process installed on it - i've also been given a 1TB western Digital {USB connected} external hard drive for cloning the software and transfering it on to the other laptops, so this afternoon i cloned the 7th laptop with all the software on it using system back up - creating a system image file on the external hard drive, but when it came to transfering this image on to the other laptops, i thought i'd beable to restore {set up the C: drive} the new laptop from the file path E: {the external hard drive path} but it doesn't have the option {E: drive or USB input or external drive} only system restore/back up disk or network path, i can't use the network path as the company has access/permission,firewall blockers that basically stop our engineers laptops from working on customers sites when online, which kind of stops any work from happening, and is why the company.
View 6 Replies
View Related
Sep 28, 2011
I am trying to moved everything---program files as well as data files---from one laptop to another. The source is XP, the destination Windows 7 Home Premium 64. From what (little) I understand, most imaging programs clone everything, including the XP register and boot drive. But how can you then boot the Windows 7 machine to run the programs that were originally instaled in XP?I know I can just drag over the data files and re-install all the software, but I am not sure I will live long enough to complete that task.
View 2 Replies
View Related
Jun 26, 2010
I migrated from a 250 GB HDD to a 500 GB. I had around 230 GB of information wich I really didn't want to loose, so I cloned the old HDD to the new one with the software Acronis True Image Home.
Apparently, the cloning succeds, but when I disconnect the old Disk and try to boot from the new one, when I log on I get stuck in "preparing your session".
View 9 Replies
View Related
Aug 17, 2009
Can anyone tell me is there any Hard Disk Cloning program similar to the Seagate Disk Wizard or Norton's Ghost that is compatible with Windows 7I tried using the Seagate Disk Wizard which I'd been using succesfully under WIN XP PRO and it creamed my backup HD and I had to reformat itPerhaps there is a Windows 7 version of SDW available or coming soon
View 9 Replies
View Related
Aug 13, 2012
I have a generic System 7 64 bit system with a 1 TB SATA drive. It has one hard drive which I have partitioned into 4 partitions, with C: being where I put all the system software. The board has mulitple SATA ports.Change considered: cloning the C: partition onto a new SSD so that I can get the performance boost of an SSD. There are some heat problems with existing hard drive so I probably need to change it out, so I would also like to clone the D:, E:, and F: partitions to a new hard drive.I have cloned a single physical drive to another physical drive, and the software (Ghost, or the like) usually handles it ok, so that all I need to do is adjust some partition sizes, and then disconnect the old hard drive and everyting is good. This includes cloning a single hard drive with multiple partitions to being cloned to a new single hard drive with identical numbers of partitions.Compared to my prior experience, is there something different about cloning one partition only vs cloning the whole drive. My proposed plan is:
1) Install SSD
2) clone C: to SSD only
3) clone D: E: F: of old drive to new drive.
4) remove old drive.
View 5 Replies
View Related
Jul 22, 2012
I am trying to use Seagate discwizard, to clone my hard drive to another. When I went through the process, the new HDD received only the C partition and not the D.
I really don't want to format the hdd and reinstall!
View 2 Replies
View Related
Dec 26, 2012
I installed a new ssd drive and cloned my c drive onto it. It also cloned my system reserved partion [about 25 megabytes]. I then, at a later date, cloned my c drive [now my new ssd drive] again back to my old primary drive so that i have an up to date copy of my primary drive. But it also cloned my system reserved partion. Can i delete some of these system reserved partions. I now have 3 of them! It makes my computer look very untidy. What ones should i leave or do i need to leave them all?
View 1 Replies
View Related
Jan 15, 2013
I have just cloned my d: drive, 500 gb to a new 1 terabyte drive f:
drive f: has 49 gig more used space then cloned drive d: users on drive f: is 39 gig larger than users on drive d: the d: drive also has around 50 gigs less used space.
all the other folders are the same size, so not only have I cloned, somehow an extra 49 gb to the f: drive but 10 gb seems to have 'gone'! I used Acronis True Image WD Edition and everything appeared to go well. I don't want to format my other drive as extra storage until I have some idea what has happened.
View 2 Replies
View Related
Jan 7, 2012
I installed a new ssd drive and cloned my c drive onto it. It also cloned my system reserved partion [about 25 megabytes].I then, at a later date, cloned my c drive [now my new ssd drive] again back to my old primary drive so that i have an up to date copy of my primary drive. But it also cloned my system reserved partion. Can i delete some of these system reserved partions. I now have 3 of them! It makes my computer look very untidy. What ones should i leave or do i need to leave them all?
View 1 Replies
View Related
Jan 5, 2013
I have a Lenovo T400 with a 500gb hard drive( with all my software and files) running win 7. I bought a Lenovo T410 with a 750gb Hard drive, running win 7, and nothing else in it. I want to put everything from the T400 hard drive on to the T410 hard drive. How can I do this?
View 3 Replies
View Related
Jun 27, 2011
Can I swap out my old hard drive from my HP dv6 to a refurbished same model? The 1st one's MOBO burned up but Hard drive was not damaged. Want to be able to access the stored data. Hoping swapping the HDs would be the easy way
View 4 Replies
View Related
Aug 29, 2012
My Lenovo Z570 (1024) is running very slow even after fresh install and defrag.The drive seems very slow and the activity list seems to be going on for quite a bit. The overall speed of the machine is effected and it seems slower that my wifes Samsung R511 i5 laptop.
View 1 Replies
View Related
Sep 4, 2011
how to get partition the hard drive in hp laptop?
View 1 Replies
View Related
Nov 6, 2011
should I partition my hard drive to have one with applications and other with data. C & D drive
View 1 Replies
View Related
Oct 6, 2012
can i Hook a hard drive up to a laptop?
View 1 Replies
View Related
Jan 3, 2013
Have set up wireless device to my PC. would like to know how to set up laptop connecting to PC
View 3 Replies
View Related
Dec 26, 2012
alright, I'm posting on behalf of a friend(doing chat on facebook..), who is trying to replace the harddrive on a windows 7 laptop.now.. installation of the new drive did not go to plan, so he tried to put the old one in, and the computer apparently took this as cause to commit seppeku if you will.we have tried everything, up to and including testing for a bad mobo, which I suspect it is.all he's getting is a power light, not even the screen's backlight is coming up.
View 9 Replies
View Related
Dec 20, 2011
A random times, often not long after startup/wakeup my hard drive appears to freeze. The hard drive light lights up solid, any programs accessing the drive freeze and resource monitor says the disk is "100% active" yet also says "0kb disk I/O" is occuring.After a couple of minutes it fixes itself and anything ive attempted to do during the time it was frozen all happens really quickly.The nature of the problem makes me believe its the hard drive at fault, but its smart readings are fine and ive ran the dell diagnostic tool that came with the laptop without finding any problems. Ive also done the ususal routine of updating drivers and the BIOS etc.
Specs:
Dell XPS L502x
Intel core i7 2ghz (2630 i think)
8gb ram
Nvidia GT 540m
Toshiba MK6461GSGY 640gb HDD
View 3 Replies
View Related
Apr 6, 2012
I have 2 laptops - the hard drive for one of them is now suddenly asking me for a password.I never set any password on it
1. I set the BIOS password on one laptop (which has a dual boot)
2. I made a backup image of the Windows OS on an external drive using that dual-booted machine
3. I then installed that backed-up image on the other harddrive using the same machine - and that caused the password....
View 2 Replies
View Related
Nov 6, 2012
My friend's laptop (Acer Aspire One 722 - Windows 7 x64) has been shut down after opening an email and Windows never started up again. When you attempt to start up the windows, it stays the black screen and says "No bootable Device Found"! I inserted Windows Live Disk and loaded it (Windows XP Mini - Golden Edition). When I went to "My Computer", it did not show any local drive. I went to "Disk Management" and in there, there was also no unallocated or allocated space. I even removed the HDD and plugged it back in. No thing happened. Then I removed the RAM card and inserted it back. Again, nothing happened! By the way, HDD had movements when laptop was on (I had removed the beneath panel).I inserted Windows 7 Disk to install a fresh Windows 7. But when you get to the part where it asks you to choose the partition to install the operating Sustem, it shows one unallocated drive with 0 (Zero) capacity! The options to Delete and format are disable. Only the option "New" is active and it gives you (0) bite to partition!
View 5 Replies
View Related
Jun 14, 2010
My motherboard crapped out on my HP dv6000 a week ago and so I decided it was time to upgrade. I just ordered a new dell latitude e6410 so I'm really excited!
Anyway, my dv6000 will not charge and is completely dead. I am trying to figure out the easiest and most economically sound way to get everything off my hard drive and on to my new machine.
View 9 Replies
View Related
Feb 6, 2013
So one of my friend's laptop had been acting slow, and I took a look at it and I cleard out some applications but it was still going bad. it turns out the hard drive had to be replaced, so he sent it in under warranty. I reinstalled Norton 360 and Office for him, and helped him reinstall some of his games.Then i found out it was acting slow again, and was practically unusable for gaming!He's coming down this weekend, and I plan to take another hack at it. But I don't know what the cause would be. it's a new hard drive with a new factory image. I suspect that the new hard drive might be faulty, but I don't know how to test it. I do have some spare hard drives around that I could install, but I'd like kto know what testing processes or programs I can use to better diagnose the problem.
View 1 Replies
View Related
May 16, 2011
im trying to install windows 7 on my laptop but its not finding any drivers
View 2 Replies
View Related
Sep 26, 2011
I am a MAC user but for a project I have to upload something on a PC...the external hard drive is recognized by the computer but I cant see the files on it...it is fine when I hook it up to the Mac..
View 1 Replies
View Related
Jan 22, 2012
I received the intact hard drive from my old Toshiba laptop (laptop was salvaged and I received a new laptop) How do I transfer the data and programs to my new Toshiba laptop? Do I need a computer wizard to perform this?
View 2 Replies
View Related
