Windows 7 64 Bit Cloning On To Blank Hard Drive
Jul 29, 2012
I have this current set up on my computer: 250Gb HDD ( C drive) - contains windows 7 64 bit OS, steam and other files. 360Gb HDD ( D drive) - Partially deleted and defunct windows vista. Some games and files on.
I recently purchased a 3Tb internal HDD, and wish to create the following setup:
3Tb internal HDD (C Drive) - contains the 250 and 360 GB HDD's cloned onto it. 250 and 360 Gb HDD's - Completely wiped and used for backup and storage.
I would also like the 250 and 360 Gb HDD's to be recognised seperately, AS IF they were seperate drives, while remaining on the same 3Tb HDD.
I can only use free software. I also do not want a RAID setup.
View 1 Replies
ADVERTISEMENT
Jun 11, 2012
My company clones hard drives for deploying our software (each software comes with a new computer and a new windows license). We clone the drive to avoid installing the mother board drivers, windows updates, sql server, etc etc each time. This worked great with Windows XP but with Windows 7 we get a boot error on the clone: "Windows failed to start. A recent hardware or software change might be the cause. To fix the problem..." We are a small company and it really is a pain to re-install everything for each new release we do.
View 4 Replies
View Related
Feb 1, 2011
i just cloned the OS hard drive in my computer from an 80GB to 160GB (both IDE) using acronis true image enterprise edition.
the clone process completed fine, but when i try to start the computer with the new hard drive plugged in (power and data cables disconnected from the old drive) i get the 'disk boot failure, insert system disk and press enter' message when the OS is supposed to startup.
i booted to the windows 7 OS disc and chose the repair option which detected that there was a startup issue with the disk and apparently fixed it, but when i restarted the computer i still get the same error message. i also used the startup repair option from the windows OS disc but it didn't detect any issues.
the interesting thing is that i can boot the new hard drive while the OS disc is in the DVD drive, but if i take it out i get the message again. i've also tried changing the jumper settings on the hard drive (master/single to cable select) but that didn't make a difference.
View 9 Replies
View Related
Oct 15, 2011
I have on my laptop (a thinkpad, from Lenovo) Windows 7 Professional, obtained via something called "MSDN Alliance" and my university. A few weeks ago, I finally had the opportunity to upgrade my hard drive. Thus, I placed the new disk in a USB case, plugged it in via USB, and performed a disk clone via a software from a company called EASUS. I then removed the old disk, placed the new one in its location (that is, inside the laptop), and removed the USB equipment. Good as new, I though. And everything appears to be working fine -- except the "nag screen" that seemingly randomly pops up out of nowhere and tells me that I am using a (I don't recall the text exactly at this moment) less that legal/legitimate installation of Windows. I can check if Windows has been activated -- and it has (of course, I did this after having installed it) (i.e., on the "old" disk), I have tried searching for solutions, however I only find issues when similar clonings have changed the drive letters.
View 9 Replies
View Related
Sep 7, 2012
I've got a laptop with a piece of really expensive software that is not transferable. As this software has been upgraded over the years, it has required more system resources in order to run smoothly. I am running Windows 7 UltimateIs it possible to clone the laptop's hard drive onto another one and place the new hard drive into a computer with better hardware???What would be the best software for this or is it ok to just use Windows 7 System image utility?
View 6 Replies
View Related
Sep 16, 2012
I want to clone my existing laptop hard drive to a hard drive that I have encased as an external hard drive. My current HD is in two partitions - C: and D:. Norton Ghost told me that I would have to copy one partition at a time. Fine. After I copied C:, I went back to copy D:, but before beginning it says - warning/any existing data on the destination drive would be deleted. So how am I supposed to move one drive at a time? I don't want multiple partitions on my new HD if I can help it.
I went ahead and began copying D: onto my external drive, and when it was done, I now can't see that drive in Windows Explorer. In Disk Management I see the drive, but it looks like there isn't any data on it from the amount available. So it looks like I"m back to square one.
View 5 Replies
View Related
Jan 15, 2013
i've been asked to set up 6 brand new Dell laptops bought for my software engineers in the industy - i have been given a 7th Dell laptop same as the other 6 which has had all the required software needed by our engineers for the machinery programing process installed on it - i've also been given a 1TB western Digital {USB connected} external hard drive for cloning the software and transfering it on to the other laptops, so this afternoon i cloned the 7th laptop with all the software on it using system back up - creating a system image file on the external hard drive, but when it came to transfering this image on to the other laptops, i thought i'd beable to restore {set up the C: drive} the new laptop from the file path E: {the external hard drive path} but it doesn't have the option {E: drive or USB input or external drive} only system restore/back up disk or network path, i can't use the network path as the company has access/permission,firewall blockers that basically stop our engineers laptops from working on customers sites when online, which kind of stops any work from happening, and is why the company.
View 6 Replies
View Related
Jul 23, 2010
I just got a new computer, new hard drive and everything. I attempted to install Windows 7 (full version, NOT an upgrade) by putting the disc in, starting the computer, and booting from the BIOS. The monitor shows a bar that says that the Windows files are loading. Then it displays the little Windows logo. And finally it comes to a blue-ish screen with a bird on it (which I have been told is the sign-on screen) with a cursor. Nothing else. I've tried pressing CTRL+ALT+DELETE and running Safe Mode. Nothing works.
I have heard that the solution might have something to do with putting certain drivers onto a flash drive. Is that true? If so, um... explain. If not, explain that too.
View 9 Replies
View Related
Mar 9, 2011
What all is involved in loading Windows 7 on a new, blank drive from an Update disk?'ve got 2 computers to upgrade and am about to build a third one, so I'd like to get the Family Pack, which has retail licenses instead of OEM, but how hard will it be to use that on the new pc build?
View 5 Replies
View Related
Jan 26, 2012
I came into the possession of a new HP computer, the hard drive has no operating system on it. Is there any way of putting windows XP or Vista on this system without going out and buying them. Are there any operating systems online that can be downloaded?
View 3 Replies
View Related
Jun 26, 2010
I migrated from a 250 GB HDD to a 500 GB. I had around 230 GB of information wich I really didn't want to loose, so I cloned the old HDD to the new one with the software Acronis True Image Home.
Apparently, the cloning succeds, but when I disconnect the old Disk and try to boot from the new one, when I log on I get stuck in "preparing your session".
View 9 Replies
View Related
Aug 17, 2009
Can anyone tell me is there any Hard Disk Cloning program similar to the Seagate Disk Wizard or Norton's Ghost that is compatible with Windows 7I tried using the Seagate Disk Wizard which I'd been using succesfully under WIN XP PRO and it creamed my backup HD and I had to reformat itPerhaps there is a Windows 7 version of SDW available or coming soon
View 9 Replies
View Related
Aug 13, 2012
I have a generic System 7 64 bit system with a 1 TB SATA drive. It has one hard drive which I have partitioned into 4 partitions, with C: being where I put all the system software. The board has mulitple SATA ports.Change considered: cloning the C: partition onto a new SSD so that I can get the performance boost of an SSD. There are some heat problems with existing hard drive so I probably need to change it out, so I would also like to clone the D:, E:, and F: partitions to a new hard drive.I have cloned a single physical drive to another physical drive, and the software (Ghost, or the like) usually handles it ok, so that all I need to do is adjust some partition sizes, and then disconnect the old hard drive and everyting is good. This includes cloning a single hard drive with multiple partitions to being cloned to a new single hard drive with identical numbers of partitions.Compared to my prior experience, is there something different about cloning one partition only vs cloning the whole drive. My proposed plan is:
1) Install SSD
2) clone C: to SSD only
3) clone D: E: F: of old drive to new drive.
4) remove old drive.
View 5 Replies
View Related
Sep 28, 2011
I am trying to moved everything---program files as well as data files---from one laptop to another. The source is XP, the destination Windows 7 Home Premium 64. From what (little) I understand, most imaging programs clone everything, including the XP register and boot drive. But how can you then boot the Windows 7 machine to run the programs that were originally instaled in XP?I know I can just drag over the data files and re-install all the software, but I am not sure I will live long enough to complete that task.
View 2 Replies
View Related
Jul 22, 2012
I am trying to use Seagate discwizard, to clone my hard drive to another. When I went through the process, the new HDD received only the C partition and not the D.
I really don't want to format the hdd and reinstall!
View 2 Replies
View Related
Dec 26, 2012
I installed a new ssd drive and cloned my c drive onto it. It also cloned my system reserved partion [about 25 megabytes]. I then, at a later date, cloned my c drive [now my new ssd drive] again back to my old primary drive so that i have an up to date copy of my primary drive. But it also cloned my system reserved partion. Can i delete some of these system reserved partions. I now have 3 of them! It makes my computer look very untidy. What ones should i leave or do i need to leave them all?
View 1 Replies
View Related
Jan 15, 2013
I have just cloned my d: drive, 500 gb to a new 1 terabyte drive f:
drive f: has 49 gig more used space then cloned drive d: users on drive f: is 39 gig larger than users on drive d: the d: drive also has around 50 gigs less used space.
all the other folders are the same size, so not only have I cloned, somehow an extra 49 gb to the f: drive but 10 gb seems to have 'gone'! I used Acronis True Image WD Edition and everything appeared to go well. I don't want to format my other drive as extra storage until I have some idea what has happened.
View 2 Replies
View Related
Jan 7, 2012
I installed a new ssd drive and cloned my c drive onto it. It also cloned my system reserved partion [about 25 megabytes].I then, at a later date, cloned my c drive [now my new ssd drive] again back to my old primary drive so that i have an up to date copy of my primary drive. But it also cloned my system reserved partion. Can i delete some of these system reserved partions. I now have 3 of them! It makes my computer look very untidy. What ones should i leave or do i need to leave them all?
View 1 Replies
View Related
Nov 14, 2012
I have a hard drive I want to backup to a 64gb flash drive and then restore it to another different hard drive than where it came from. I have windows 7 and office on my laptop and I want it on my desktop pc. There isn't close to 64gb of info on my laptop so it should be fine even though the hard drive says I have 160gb. It is all free space except for those programs.
View 3 Replies
View Related
Sep 13, 2012
The title I chose was probably not the best, come to think of it. It isn't so much the resizing part of this process as it is all the rest of it that I seem to be having problems with.Okay, first of all I need to specify that I'm just an average user when it comes to Windows 7 and hardware nitty gritty. to which I am very grateful. And here I am again, hat in one hand and a problem in the other. Here's the situation: I have a laptop whose hard drive I've outgrown, so I bought a larger one for the machine. I also bought a USB-based enclosure so I'd be able to have the drives share data. I installed the new drive into the laptop, and put the old one in the enclosure. The old drive is 160 gigs in size with only about 3 gigs open. The new one is 500 gigs.
I used Clonezilla to clone the 160 to the 500. This worked perfectly. But I wound up with a new drive that still only had 3 gigs open. There were about 340 gigs left unallocated. So I used another Linux-based utility -- Parted Magic -- to reclaim the unallocated space.Okay, I need to back up for a second. The old drive has two partitions, call them C and D. The D partition is fairly small -- about 10 gigs.So Clonezilla cloned both partitions at their original sizes, but the funny thing was, it set the D partition ahead of the C partition. When I picture the graphic display that I get with a disk partition program, in my experience, the left most partition is the root partition, or "C". But for some reason, Clonezilla put D there, and C to the right of it. Well, I thought it probably doesn't matter because the OS can boot from other than the root partition -- or whatever it's proper term is -- from what I understand. So I expanded both in Parted Magic to take up all the unallocated space. Then I ran it and everything was set.
Went to boot the computer and no go. It couldn't find the boot sector or whatever. I didn't write down the error message so I don't recall the precise wording, but that is essentially what it was telling me. So I booted Parted Magic again, and took a look. Well, the "C" drive had the "boot" flag set, so I didn't really understand what the problem was other than it being out of place.So this time I deleted the D partition so that C was the only one and moved C down to take up D's space. Linux is assigning each of these partitions a name or descriptor, like sba1 and sba2. Well, D got the sba1 and C got the sba2. When I deleted D, C's descriptor didn't change. It's still sba2. I dunno if this will matter or not.Right now, I'm waiting for PM to finish moving the data as the C partition is expanded. Got another hour or so to go before it's done. I guess I'll find out if my workaround has worked.
My object was to transfer all the data from the old disk to the new, and to be able to access all the space in the new drive (duh). I also wanted C and D partitions. After the moving and expansion of C has been completed, there will be about 275 gigs of unallocated space left. My thinking is that if my latest attempt is successful, I'll go back and configure the unallocated space as D and then copy D's data off the old drive onto the new.So anyway, the point of this long-winded post is to ask the all-knowing forum mind how I should have done it and whether what I'm doing now will work. So the next time I can avoid the hours I've spent spinning my wheels. If I have to start all over, I'm prepared to do that, but before I do, I would like to find a way to "clone" the old drive (probably not the best word choice) AND expand the two directories at the same time. Clonezilla did not allow for this, near as I can determine, so I'm wondering which other Linux-based utility I can use? I've got a couple of disks of Linux utilities, and for all I know I might have one of them already. From what I've recently read there's also a Windows 7 Disk Management Tool that can do the resizing? I'm not at all familiar with it.
View 8 Replies
View Related
Dec 12, 2011
I have recently purchased an old off-lease HP Compaq dc7700p to use as a backup desktop. I loaded Windows 7 64 onto it and everything seems to be functioning normally aside from a peculiar problem. Every time the PC restarts, it will hang on a blank black screen after POST. I have to hold down the power button for a hard reset, after which it will boot normally.
View 2 Replies
View Related
Oct 27, 2011
After the latest Win 7 updates on three of my computers, the CD drive does not read blank CDs. It gives an error message "Windows cannot read the disk in drive E:"etc, format the disk etc.I was always able to put a blank CD in the drive and see that it was blank or could copy files to drive. Now, it only gives me this message. I tried several different blank CDs. They work fine in my older XP computer.
View 2 Replies
View Related
Oct 25, 2011
So, I have a i7 2600K system with a solid state disk as the boot drive, and an older (c2008) Samsung Spinpoint F3 500GB drive as the data drive for programs (that I deem as not worthy of the quick load times). The hard drive has given me some errors over time, and I bought a hard disk to replace it (a Hitachi 1TB). The issue I'm having is that the fact that Windows 7 puts a small (100MB) partition on the F3, and for some reason, even though I'm running Acronis 2012, it doesn't seem to be able to clone the F3 over to the Hitachi. I've also tried Drive XML, and for my 2 hour wait, I only managed to acquire a boot error. Thankfully, I've not done anything rash to destroy the data on the F3, but given the fact that I've seen corrupted files in Steam from that drive, I'm not will to trust it long term with my data. I really need to get the data onto that Hitachi, though... Anyone have any advice for upgrading the HDD in a SSD/HDD system? I don't really feel like it should be so hard, especially if I've bought Acronis True Image, but maybe they haven't designed their product to handle this scenario quite yet?
View 9 Replies
View Related
Jun 16, 2011
I have a HP Touchsmart IQ500. Turning my computer PC on today, all I got was a blue HP invent screen with setup, boot menu, system recovery, and system diagnosis, and I could not get past it. I entered the BIOS and figured out that the hard drive was listed as "not installed." Pretty sure that is the main problem.I tried a system restore (with the Windows 7 install disc), but I guess the computer couldn't read the hard drive enough to enter safe mode (I tried restarting and F8ing several times). I put in an external hard drive, and the BIOS read it; however, windows does not allow you to partition an OS on a hard drive.
View 2 Replies
View Related
Mar 30, 2012
I have an internal hard disk not in use ,and I would like to make it as external disk !I looked on the net and I found I should have the " encelsure " butt I think I wont find it here in my city .So is there another way ? like usb -esata cable
View 3 Replies
View Related
Mar 4, 2010
Me and my brother built me a new computer from scratch (he did the building - i did the watching). I purchased an internal hard drive from Overclockers UK. It's a Samsung 1TB drive. I also have a 64 Solid-state drive in there as my primary hard drive that Windows was installed on and a couple of programs are installed on. My storage disk (the 1TB disk) is for all my music/films etc. Whenever I drag and drop a file into the Samsung hard-drive - it copies it rather than moves it instantly.When I had a laptop, I had 3 external hard drives and this is the way it copied files onto them.how I can get the internal drive to stop acting like an external drive?
View 6 Replies
View Related
Dec 24, 2011
I have a virus infected sata hard drive with windows 7 on it. It has the win 7 anti virus 2012 on it, and it's a cybercriminal virus. I have lots of files I want to transfer to the new sata drive. I already have windows 7 installed on the new drive. How do I get the files from the bad drive to the new one?
View 4 Replies
View Related
Jan 21, 2013
I have a USB Webcam 6.1.7601.17514 from Microsoft installed on a Fujitsu Laptop (Windows 7 ) and I want to copy and install it on another Fujitsu laptop (Windows 7).The other laptop the camera is not working and there is no webcam driver installed.
View 1 Replies
View Related
Feb 10, 2012
My dvd burner will not recognize a blank dvd-r. I am using imgburn and i get the error "Device not ready: ID CRC or ECC error". The disc is a Taiyo Yuden dvd-r. I was able to burn a Verbatim dvd+r but not the TY dvd-r. My burner is a MATSHITA DVD-RAM UJ875AS and my laptop is a Lenovo Y450 running windows 7. I have also tried the same TY disc in another laptop and it was recognized perfectly
View 7 Replies
View Related
Dec 18, 2011
i am having problems with my dvd drives they will both read discs with data on but wont detect blank media, i have tried a number of things now, ive uninstalled them, ive removed the filters in the reg, ive searched for firmware updates and ive tried restoring my system, its not the media either, any i try is the same and they are fine in a different system, the only thing i can think of is if something happened when i changed from xp to 7 but im sure ive burned dvd whilst running 7 before, cant remember. The drives are SONY DVD RW DW-D22A and LITE-ON COMBO SOHC-4836K.
View 4 Replies
View Related
Nov 29, 2011
I'm going to be installing a new SSD into my laptop fairly soon (replacing the current HDD and putting the HDD in my optical drive). I am also upgrading from 7 Professional to 7 Enterprise, and with this comes many, many questions.First of all, how would I go about installing an OS onto a completely blank drive? I have experience with system partitioning and installing a second OS, but never onto a clean slate. Would I use a SATA-USB cable and install the OS through that, or would I have to burn the ISO onto a CD and install through my optical drive once I installed the SSD? Secondly, would I be able to use a system backup of my Professional system to restore my programs and files to the Enterprise filesystem? Or would I have to install everything from scratch?
View 4 Replies
View Related
