My dvd burner will not recognize a blank dvd-r. I am using imgburn and i get the error "Device not ready: ID CRC or ECC error". The disc is a Taiyo Yuden dvd-r. I was able to burn a Verbatim dvd+r but not the TY dvd-r. My burner is a MATSHITA DVD-RAM UJ875AS and my laptop is a Lenovo Y450 running windows 7. I have also tried the same TY disc in another laptop and it was recognized perfectly
View 7 Replies
I have Dell computer with HL-DT-ST DVD+-RW GSA-H73N SCSI CdRom Device...never had a problem with it now all of a sudden it wont recognize a blank disc...it will play a dvd movie with no problem...I uninstalled and then reinstalled the drivers which did nothing...also uninstalled the drive completely which didnt help either
View 3 Replies View RelatedI have now installed win 7 three times, 64 bit and now 32 bit and have the same problem. I have read many similar problems on various forums and microsoft have been remotely on my PC for the last 2 days, and cannot resolve the I have 2 DVD RW drives, and both of them can read all types of media with no problems. When blank discs are inserted, all programs trying to access the drives just lock up. The "not responding" message will clear as soon as the disc is ejected and everything is then back to normal. If I leave the disc in the drive it will eventually recognise it after about 1.5 hours, but I can then do nothing with it.Microsoft have stated to me today that it is not an issue with Windows 7 and I should contact the manufacturers of the drives for help or updated drivers. All my drivers are showing as being up to date, and I cannot find any other drivers on the OEM websites.
Prior to purchasing, the upgrade advisor stated that I would have no issues moving from XP to WIN 7. Microsoft have informed me today that the upgrade advisor will not guarantee any piece of hardware will work correctly after win 7 install, it only indicates if any hardware will cause instability problems !!!I have an internal LITE-ON SHM-165P6S, and a USB Lightscribe drive built into my HP C8180 printer. These are 2 completely different drives that are exhibiting the same problem (only win 7 is the common theme)
I upgraded from Vista to Windows 7. Everything is great (big difference, I'm very pleased). I want to create a system repair disk for this new OS, just in case. But every time I load a blank CD, even after formatting it, the computer says that the CD is not blank.Yes it is! Why is it not recognizing this as a blank CD? I have tried several of them, same result.
View 5 Replies View RelatedI was running windows seven and my HD started failing so I bought a new one and had it shipped in. After recieving it today I backed up my old HD on to a My Passport I had lying around created my repair disk and set out to restore my new blank HD. When I got to the startup and repair menu I clicked restore from image and my computer scanned and could not find an image to restore from. The external is plugged in and I can see the backup files when it gives me the option to look for drivers but it wont recognize the external to let me load the files from it.
View 2 Replies View RelatedI recently installed windows 7 home premium 64 bit, previous OS was Vista home premium 32 bit. My desktop is an HP pavilion d4650y. I have the OS loaded on my main HD which is a SATA.
HD & DVD drive worked perfectly before on vista. I tested both devices on another pc with XP and they work fine. I've triple checked the connections but still the devices are not recognized by Windows 7. I've also tried renaming the HD & changing the drive letter, but still no luck.
Both drives are connected to a PCI E card, and are set to cable select, on separate cables. In the BIOS both drives show up. In disk management they do not show up at all.
My HD is a western digital 250 gb EIDE, and the DVD drive is a IDE Pioneer DVD burner (secondary disc drive).
I have two drives by seagate 1tb and 500gb. The 1tb drive is highspeed but when i plug it into the 3.0usb ss it does not show up. Im stuck using the 2.0 drive.
View 6 Replies View Relatedmy computer will recognize the drive but not the disc in it. i am running windows 7.
View 13 Replies View RelatedOS: Windows 7 Pro
CD Drive: HL-DT-ST CDRW/DVD GCC4244 ATA
Computer recognizes the drive, but no CD or DVD is recognized. When anything is inserted, the drive is completely silent. I try to open the drive, then it ejects the CD or DVD automatically.
I have uninstalled and rebooted....it automatically reinstalled upon rebooting, but no changes. I tried the Microsoft website automatic fix, but it didn't work either. Says the driver has the latest version.
I've tried installing a couple times now and I keep on getting an error saying that I'm missing a driver for the DVD drive.
Thing is, I'm installing Win 7 using the DVD drive.
So I've looked for a driver for my drive (Lite-On LH-20A1S) and all I get from the Lite-On site is Firmware. I've also tried the USB/DVD Download Tool to make a bootable USB stick but that program says my .iso isn't valid.
I reinstalled Windows 7 initializing all the hard drives to fix the constant crashes, and it seems to have worked. The bad news is that the computer does not seem to recognize one of my CD drive. By that I mean, if you click on computer it will show one of my CD drives under devices and removable storage, but not the other CD drive.
If I put a CD in, the drive will spin up but nothing happens. I tried to reinstall the drivers for the one CD drive but that was no help. How do I get the computer to see this other CD drive?
I'm running Window 7. Should I re-install Windows 7 again?
I have a Thinkpad W500 laptop with a CD/DVD-R/RW multi drive in the UltraSlim-Bay. Windows 7 Pro 64-bit does not recognize it as a removable drive and does not provide a means to "safely remove" it.
Previously, Vista Business SP1 64-bit ran on the same hardware and handled the same optical drive correctly.
There was driver for "ez-eject" that was available from IBM/Lenovo for previous Microsoft OS. Is that what made the optical drive removable? If so, is there anything like that available for Windows 7 to correctly handle this drive as removable?
I have an ASUS laptop fairly new and I tryed playing a dvd and it won't work, says it doesnt recognise the format (normal region 2 dvd) it plays cds just fine but not dvds, ive tried updating the drivers and checking its set to the right region but they say they are up to date?
View 7 Replies View RelatedToday I did a clean install of Windows 7 on a 64 GB SSD. While it was installing my 1 TB secondary drive was not connected.
After everything was finished I connected the Second Drive. It can be seen in devices, but I am not allowed to access it. I have checked disk managment under Adminstrative tools and it is also not there.
My computer will not recognize my CD ROM drive (the D drive). For example: when I put a disc into the CD drive, the mouse pointer briefly changes to a CD icon (as it normally does) to tell me -- presumably -- that the drive is scanning the disc for its Table Of Contents. However, the CD icon only appears for a split second (when normally it would take a few seconds to read the contents). When I double-click on the D drive to run the CD, it prompts me to 'Please insert disc into Drive D', when in fact there is already a disc in the drive. Can you tell me why this might be happening?
View 5 Replies View RelatedI can't download my music to itunes.
View 2 Replies View RelatedA couple months ago I installed a new graphics card in my computer. In the last few days I have realized that my dvd drive will open and windows says its working fine but no matter what I do it will not recognize that a disc is in the drive. I have used it very little, and possibly never since I installed the new graphics card so I went into my computer to see if there were any loose cables but I saw none. I also uninstalled then reinstalled the drivers for the thing but still no success.
View 2 Replies View RelatedI am building a computer fort the first time and I am having trouble getting Windows 7 to recognize my hard drive. My har drive and mother board are as follows: Hard drive-Seagate Barracuda 7200.12 ST3500418AS 500GB 7200 RPM 16MB Cache SATA 3.0Gb/s 3.5" Internal Hard Drive -Bare Drive, Mother Board-GIGABYTE GA-870A-UD3 AM3 AMD 870 SATA 6Gb/s USB 3.0 ATX AMD Motherboard when I go to install windows 7 I eventually get to a screen where it ask for an install location, unfortunately it doesn�t seem to recognize my hard drive. It gives me an option of installing driver so I went to the gigabyte website and downloaded the drivers that it said I required. I believe there was an ACHI driver and a Raid driver. After I stalled both of these drivers the hard drive still was not detected. One strange thing I noticed was that when I browse for a driver my hard drive is listed as a place I can search. I then proceeded to the Bios to try and match the drivers. The hard drive is detected in the Bio. When the HD is set to IDE my BluRay play is able to read the windows install disc. But windows won�t recognize my HD. If I set it to ACHI or Raid I can�t seem to get the windows CD to load. Do I need an IDE driver? Out of frustration I tried installing a windows XP to see if it would be able to recognize my hard drive. It seemed to load on the hard drive fine but entered this weird loop where windows would install itself but wouldn�t actually load as the operating system. In other words when I try to restart my computer and run the OS off of my hard drive it gave me an error message. Something like (windows OS could not be located) When I went to go install windows 7 again my hard drive still was not detected as a place to intall windows but when I search the hard drive (as if I was searching for a driver) I can see the Windows files that were loaded from when I tried to install XP.
View 5 Replies View RelatedI'm not particularly computer literate, however my desktop computer won't read discs. Whether it be a DVD, a set-up disc or even music CD's, there's a 1 in 10 chance that it will see it is there. On the odd occasion it opens, it works fine.
Currently an issue as I am trying to install wireless stick software but the disc will not load.
I use the subst command to map my d:downloads to A:
In windows XP recycle bin moved any deleted files from A: to the bin, but in windows 7 it doesn't. I can drag the files from the a: to the destop or another drive, then delete them from there to be stored in RB (just in case i need to restore them) but anything deleted from the A: is just deleted.
any ideas how to make the RB recognise a mapped (virtual) drive?
My 1.5TB USB( using the EZ-dock adapter) drive is about full, and I'm looking at a 3GB drive to replace it. My system is a Netbook with USB 2.0 as the only external drive interface so that limits my options considerably if I want to keep it to something I can throw into my suitcase easily when travelling.
View 1 Replies View RelatedMost of CDs and DVDs are working fine, but there are some which my DVD RW doesn't recognize. When I insert them, it doesn't react at all or it says that CD/DVD is blank. These CDs and DVDs are working without any problems on my old computer with Windows XP and also on my brother's laptop with Windows XP.
View 4 Replies View RelatedI am trying to do a backup, but it keeps telling me to put a cd into drive E. I have tried both slots and still have the problem.
View 2 Replies View Relatedhave an acer veriton, trying to hook up an external cd/dvd drive.
View 4 Replies View RelatedMy Dell Inspiron (updated to Win7) does not regognize a USB hard drive that contains my backup data.
View 1 Replies View Relatedmy cd player downt pick up my cd but it plays music
View 2 Replies View Relatedi am having problems with my dvd drives they will both read discs with data on but wont detect blank media, i have tried a number of things now, ive uninstalled them, ive removed the filters in the reg, ive searched for firmware updates and ive tried restoring my system, its not the media either, any i try is the same and they are fine in a different system, the only thing i can think of is if something happened when i changed from xp to 7 but im sure ive burned dvd whilst running 7 before, cant remember. The drives are SONY DVD RW DW-D22A and LITE-ON COMBO SOHC-4836K.
View 4 Replies View RelatedI'm going to be installing a new SSD into my laptop fairly soon (replacing the current HDD and putting the HDD in my optical drive). I am also upgrading from 7 Professional to 7 Enterprise, and with this comes many, many questions.First of all, how would I go about installing an OS onto a completely blank drive? I have experience with system partitioning and installing a second OS, but never onto a clean slate. Would I use a SATA-USB cable and install the OS through that, or would I have to burn the ISO onto a CD and install through my optical drive once I installed the SSD? Secondly, would I be able to use a system backup of my Professional system to restore my programs and files to the Enterprise filesystem? Or would I have to install everything from scratch?
View 4 Replies View RelatedI'm having some trouble getting an external hard drive to be recognized by my computer. I have quite a few already, but I got another one because one of them won't read on my comp, although it will read on my netbook. The new drive I got has the same issue, no go on the comp, but works fine on the netbook.
I tried unplugging all of the other drives and even using the other cables to connect the new drive, but Windows 7 simply won't recognize it being plugged in. No "badump" sound and no icon in My Computer. Tried restarting, nothing. I tried it in all six of my computer's USB ports, but got no better result.
I've been all over the net trying to resolve this issue, and found many hotfixes,downloads from Microsoft and manufacturer, but to no avail. My external drive was recognized for the first month. Then, very suddenly, Windows 7 doesn't recognize it. It sees it, but prompts a "Need to Format before first use". It has 300G already used with valuable info.Tried moving the external hard drive to our home PC with Windows XP and the same "Need to Format" message is prompted. If I hook it up on my wife's MAC, I can see the data. Now I have read that this is a known issue with the 64bit version of Windows and external drive. I have already all the KB976972 and KB977074 download fixes from Microsoft. I have also tried to uninstall the drive, unplug it, turn it off, restarting Windows, and plugging back the drive, but I have the formatting prompt again. And if I choose to not format, i have an error message DATA ERROR (CYCLIC REDUNDANCY CHECK).**This does not seem to be an issue regarding only the WD drives but all drives**Called WD tech, and it was useless. Does anyone have a fix? A link to share? An idea? I'm running Windows 7 Ultimate 64bit on my HP Pavilion a6418f.
View 8 Replies View RelatedI have a USB Kingston DataTraveler 2 GB jump drive that my wife uses with our philips stereo. I used HP USB Disk Storage Format Tool 2.2.3 with some Windows 95 files to create a bootable USB. After i was done I deleted everything on it and put mp3s back on. The stereo says "no audio found". I used Acronis Disk Director 11 to delete the partition and put FAT32 partition on there. Same thing with the stereo saying no audio found.
View 3 Replies View Related
