I'm having some trouble getting an external hard drive to be recognized by my computer. I have quite a few already, but I got another one because one of them won't read on my comp, although it will read on my netbook. The new drive I got has the same issue, no go on the comp, but works fine on the netbook.
I tried unplugging all of the other drives and even using the other cables to connect the new drive, but Windows 7 simply won't recognize it being plugged in. No "badump" sound and no icon in My Computer. Tried restarting, nothing. I tried it in all six of my computer's USB ports, but got no better result.
For some reason my HP Laptop (Win 7 Home Premium) can't see/recognize my usb external hard drive (seagate). When I start/restart my computer and connected the usb cable into laptop, it shows the icon on bottom taskbar (safely remove hardware and when clicked on the usb icon, I see "open Devices & Printers and Eject USB to IDE bridge), but I can't see my drive at all when I click on "my computer"? I can only see it under "right click Computer, Manage, Device Manger, Disk Drives," it only says; "generic USB Disk USB Device". And when I expanded the USB controllers via Device Manager, I can see it under USB Mass Storage Device. Sadly, I can't do much there/here unless Win 7 can see/recognize the drive under "My Computer".<> HD is 40GB IDE Seagate (enclosure is PowerSpec 3.5 IDE to USB 2.0)<> Drive is only storage for data, documents, pictures and softwares/programs, etc.<> Drive is/was not formattedAgain, this drive was never formatted, only for storage purpose (i.e. pictures, documents, data, etc.). I can see it on my old computer when connected internal via IDE cable.
I am a MAC user but for a project I have to upload something on a PC...the external hard drive is recognized by the computer but I cant see the files on it...it is fine when I hook it up to the Mac..
I'm using the release candidate and whenever I plug in my Western Digital Passport USB external hard drive, I get nothing. It doesn't show up in device manager or in My Computer. The light on the harddrive comes on and the drive spins up, so I know it's working. Windows just won't recognize it.
I use an WD external hard drive (1TB) for additional storage and it was working fine with no issues. The small USB connector broke off the board yesterday and I purchased a new enclosure and installed it. Now my computer does not recognize it as a storage device. I have all the data still on the HD and really do not want to loose it. I tried adding a letter for the drive, but it does not show up to change the letter of the drive.
my laptop acer aspire doesnt recognize my external hard drive in windows7. I will be great ful to them. it doesn't show any external hard drive but it shows pen drive and mobile usb cable but not external hard disk
.I didn't wait for the computer to tell me it was ok to remove the drive in the usb port. Now my computer no longer recognizes the external drive After removing my external hard drive (without the ok) my computer no longer recognizes the external hard drive. What do I do.
My computer does not recognize my WD1200B015-RNN external drive when I plug it in to the usb port. I now have windows 7. It previously worked on Vista?
computer will not recognize windows 7 on my usb hard drive when I try to boot from it. I go into bios and select usb hard drive but it goes on with its normal routine. Need to reinstall windows on a computer that I am locked out of.
I got a problem, my external hard drive (westen digital 1.0TB) isn't popping up my computer. I can see it in devices (USB to ATA/ATAPI bridge) but i can't acces it.What i've done already:Computer Management-> Disk Management. Than ive to initialize the disk, i can choose between MBR and GPT. In both cases i got the error: Data error (cyclic redundancy check). I can't chance any letter Downloaded different programs but non of them worked
I have attached a Seagate 500 GG external hard drive to my computer but it is not showing up in My Computer.I have browsed similar threads and on their advice gone into Device Manager.The drive is there but with no letter assigned to it but when I right click to assign one, it refers me to Windows Help, which is unable to solve the problem. There are actually two extra ikons in Device Manager - one marked FAT Healthy (EISA Configuration) and the other just marked (GPT Protective Partition).The device is acknowledged as working properly in Device Manager.The files on this drive were created on a Mac, which may be the source of the problem? Most of them I will therefore not be able to read, but there is one which is a .mov file which I should be able to read and hopefully copy - if I can access it.Is there any way I can access the drive via my PC (Windows XP) or will the drive have been formatted for Mac only and therefore is inaccessible via PC?
I am trying to transfer files on my external hard drive (Toshiba Canvio - Windows XP) to my new computer (Windows 7), but when I click on the file located on the external hard drive, I get the following messsage: "please select a valid job". How can I transfer all of the old files on my external drive to my new computer?
I am attempting to help my friend. Has old laptop, been making system image backups with Macrium Free on external usb WD Hardrive. Now wishes to get new laptop and transfer pertinent data and programs to the new computer. I haven't a clue. He had not installed the HD programming, using macrium instead.
my desktop computer won't boot. When I turn it on it displays the welcome splash screen and then goes black. A message will then display that says CMD failed to start and then it will shut down. It does the same thing in safe mode as well.My question is. I have already set up the HD from the desktop as an external to my laptop so I could get files off it. Is there any way to do system restore on the hard drive when it is set as an external? Because I did this last night and I think if I restore the drive it will fix it.
My 1.5TB USB( using the EZ-dock adapter) drive is about full, and I'm looking at a 3GB drive to replace it. My system is a Netbook with USB 2.0 as the only external drive interface so that limits my options considerably if I want to keep it to something I can throw into my suitcase easily when travelling.
I've been all over the net trying to resolve this issue, and found many hotfixes,downloads from Microsoft and manufacturer, but to no avail. My external drive was recognized for the first month. Then, very suddenly, Windows 7 doesn't recognize it. It sees it, but prompts a "Need to Format before first use". It has 300G already used with valuable info.Tried moving the external hard drive to our home PC with Windows XP and the same "Need to Format" message is prompted. If I hook it up on my wife's MAC, I can see the data. Now I have read that this is a known issue with the 64bit version of Windows and external drive. I have already all the KB976972 and KB977074 download fixes from Microsoft. I have also tried to uninstall the drive, unplug it, turn it off, restarting Windows, and plugging back the drive, but I have the formatting prompt again. And if I choose to not format, i have an error message DATA ERROR (CYCLIC REDUNDANCY CHECK).**This does not seem to be an issue regarding only the WD drives but all drives**Called WD tech, and it was useless. Does anyone have a fix? A link to share? An idea? I'm running Windows 7 Ultimate 64bit on my HP Pavilion a6418f.
I was running windows seven and my HD started failing so I bought a new one and had it shipped in. After recieving it today I backed up my old HD on to a My Passport I had lying around created my repair disk and set out to restore my new blank HD. When I got to the startup and repair menu I clicked restore from image and my computer scanned and could not find an image to restore from. The external is plugged in and I can see the backup files when it gives me the option to look for drivers but it wont recognize the external to let me load the files from it.
Today I did a clean install of Windows 7 on a 64 GB SSD. While it was installing my 1 TB secondary drive was not connected.
After everything was finished I connected the Second Drive. It can be seen in devices, but I am not allowed to access it. I have checked disk managment under Adminstrative tools and it is also not there.
I am building a computer fort the first time and I am having trouble getting Windows 7 to recognize my hard drive. My har drive and mother board are as follows: Hard drive-Seagate Barracuda 7200.12 ST3500418AS 500GB 7200 RPM 16MB Cache SATA 3.0Gb/s 3.5" Internal Hard Drive -Bare Drive, Mother Board-GIGABYTE GA-870A-UD3 AM3 AMD 870 SATA 6Gb/s USB 3.0 ATX AMD Motherboard when I go to install windows 7 I eventually get to a screen where it ask for an install location, unfortunately it doesn�t seem to recognize my hard drive. It gives me an option of installing driver so I went to the gigabyte website and downloaded the drivers that it said I required. I believe there was an ACHI driver and a Raid driver. After I stalled both of these drivers the hard drive still was not detected. One strange thing I noticed was that when I browse for a driver my hard drive is listed as a place I can search. I then proceeded to the Bios to try and match the drivers. The hard drive is detected in the Bio. When the HD is set to IDE my BluRay play is able to read the windows install disc. But windows won�t recognize my HD. If I set it to ACHI or Raid I can�t seem to get the windows CD to load. Do I need an IDE driver? Out of frustration I tried installing a windows XP to see if it would be able to recognize my hard drive. It seemed to load on the hard drive fine but entered this weird loop where windows would install itself but wouldn�t actually load as the operating system. In other words when I try to restart my computer and run the OS off of my hard drive it gave me an error message. Something like (windows OS could not be located) When I went to go install windows 7 again my hard drive still was not detected as a place to intall windows but when I search the hard drive (as if I was searching for a driver) I can see the Windows files that were loaded from when I tried to install XP.
I recently installed windows 7 home premium 64 bit, previous OS was Vista home premium 32 bit. My desktop is an HP pavilion d4650y. I have the OS loaded on my main HD which is a SATA.
HD & DVD drive worked perfectly before on vista. I tested both devices on another pc with XP and they work fine. I've triple checked the connections but still the devices are not recognized by Windows 7. I've also tried renaming the HD & changing the drive letter, but still no luck.
Both drives are connected to a PCI E card, and are set to cable select, on separate cables. In the BIOS both drives show up. In disk management they do not show up at all.
My HD is a western digital 250 gb EIDE, and the DVD drive is a IDE Pioneer DVD burner (secondary disc drive).
I have an internal hard disk not in use ,and I would like to make it as external disk !I looked on the net and I found I should have the " encelsure " butt I think I wont find it here in my city .So is there another way ? like usb -esata cable
Me and my brother built me a new computer from scratch (he did the building - i did the watching). I purchased an internal hard drive from Overclockers UK. It's a Samsung 1TB drive. I also have a 64 Solid-state drive in there as my primary hard drive that Windows was installed on and a couple of programs are installed on. My storage disk (the 1TB disk) is for all my music/films etc. Whenever I drag and drop a file into the Samsung hard-drive - it copies it rather than moves it instantly.When I had a laptop, I had 3 external hard drives and this is the way it copied files onto them.how I can get the internal drive to stop acting like an external drive?
I am building a computer fort the first time and I am having trouble getting Windows 7 to recognize my hard drive. My har drive and mother board are as follows: Hard drive-Seagate Barracuda 7200.12 ST3500418AS 500GB 7200 RPM 16MB Cache SATA 3.0Gb/s 3.5" Internal Hard Drive -Bare Drive, Mother Board-GIGABYTE GA-870A-UD3 AM3 AMD 870 SATA 6Gb/s USB 3.0 ATX AMD Motherboard..So when I go to install windows 7 I eventually get to a screen where it ask for an install location, unfortunately it doesn't seem to recognize my hard drive. It gives me an option of installing driver so I went to the gigabyte website and downloaded the drivers that it said I required. I believe there was an AHCI driver and a Raid driver. After I stalled both of these drivers the hard drive still was not detected. One strange thing I noticed was that when I browse for a driver my hard drive is listed as a place I can search. I then proceeded to the Bios to try and match the drivers.The hard drive is detected in the Bio. When the HD is set to IDE my BluRay play is able to read the windows install disc. But windows won't recognize my HD. If I set it to AHCI or Raid I can't seem to get the windows CD to load. Do I need an IDE driver? Out of frustration I tried installing a windows XP to see if it would be able to recognize my hard drive. It seemed to load on the hard drive fine but entered this weird loop where windows would install itself but wouldn't actually load as the operating system. In other words when I try to restart my computer and run the OS off of my hard drive it gave me an error message. Something like (windows OS could not be located) When I went to go install windows 7 again my hard drive still was not detected as a place to intall windows but when I search the hard drive (as if I was searching for a driver) I can see the Windows files that were loaded from when I tried to install XP.
My mother asked me to fix her computer, his window XP is badly corrupted, so I tried to install Window 7 on her computer. However, the hard drive didn't show on the screen. I found it quite odd because BIOS detected it as IDE driver, and it's a SATA driver. I tried to install with old Window XP installation CD. Same thing, doesn't show on the window XP installation screen either.
I tried to hook hard drive on other computer, and was testing with Window 7 XD and see if it was working, and it did. It shown on the disk screen. My guess that it's probably the BIOS that occurred, or perhaps other things. I have one hard drive, nothing more.
I built a new computer. Rather expensive, but it should perform well. -Anyway-, I bought a brand new hard drive with the expectation of installing windows 7 on it and then working from there. The hard drive is recognized in the BIOS, the CMOS, and anything at all I've checked, but when I put the windows 7 64 bit disk in and try to do a custom install, seeing as I have nothing on the disk from which to upgrade, my hard drive does not show up in the section in which 7 asks where I want to install.
Motherboard is GIGABYTE GA-X58A-UD3R LGA 1366 Intel X58 SATA 6Gb/s USB 3.0 ATX Intel Motherboard, hard drive is Western Digital Caviar Black WD1001FALS 1TB 7200 RPM SATA 3.0Gb/s 3.5" Internal Hard Drive.
The hard drive is plugged into the top SATA port (It has like, 10).
I have my WD75 Caviar Black 750G from my old computer it has all my files on it and it will not let me plug it in and look through it probably because the original computer was Win XP. Is there anyway to get the information off of the harddrive?