Laptop Acer Aspire Doesn't Recognize External Hard Drive In Windows 7
Mar 28, 2011
my laptop acer aspire doesnt recognize my external hard drive in windows7. I will be great ful to them. it doesn't show any external hard drive but it shows pen drive and mobile usb cable but not external hard disk
I am a MAC user but for a project I have to upload something on a PC...the external hard drive is recognized by the computer but I cant see the files on it...it is fine when I hook it up to the Mac..
I have a new acer aspire 5750g The dvd-rw does not work ive tried games, music cds nothing works, I can hear it spinning but that all nothing appears on the screen
For some reason my HP Laptop (Win 7 Home Premium) can't see/recognize my usb external hard drive (seagate). When I start/restart my computer and connected the usb cable into laptop, it shows the icon on bottom taskbar (safely remove hardware and when clicked on the usb icon, I see "open Devices & Printers and Eject USB to IDE bridge), but I can't see my drive at all when I click on "my computer"? I can only see it under "right click Computer, Manage, Device Manger, Disk Drives," it only says; "generic USB Disk USB Device". And when I expanded the USB controllers via Device Manager, I can see it under USB Mass Storage Device. Sadly, I can't do much there/here unless Win 7 can see/recognize the drive under "My Computer".<> HD is 40GB IDE Seagate (enclosure is PowerSpec 3.5 IDE to USB 2.0)<> Drive is only storage for data, documents, pictures and softwares/programs, etc.<> Drive is/was not formattedAgain, this drive was never formatted, only for storage purpose (i.e. pictures, documents, data, etc.). I can see it on my old computer when connected internal via IDE cable.
My mother asked me to fix her computer, his window XP is badly corrupted, so I tried to install Window 7 on her computer. However, the hard drive didn't show on the screen. I found it quite odd because BIOS detected it as IDE driver, and it's a SATA driver. I tried to install with old Window XP installation CD. Same thing, doesn't show on the window XP installation screen either.
I tried to hook hard drive on other computer, and was testing with Window 7 XD and see if it was working, and it did. It shown on the disk screen. My guess that it's probably the BIOS that occurred, or perhaps other things. I have one hard drive, nothing more.
I have my WD75 Caviar Black 750G from my old computer it has all my files on it and it will not let me plug it in and look through it probably because the original computer was Win XP. Is there anyway to get the information off of the harddrive?
I'm using the release candidate and whenever I plug in my Western Digital Passport USB external hard drive, I get nothing. It doesn't show up in device manager or in My Computer. The light on the harddrive comes on and the drive spins up, so I know it's working. Windows just won't recognize it.
I recently attempted to add a hard drive to my Lenovo W520 laptop using a CD/DVD caddy accessory designed to hold a SATA hard drive.Windows recognized the new device and according to its messages, automatically installed the required device drivers. However, when I go into Windows Explorer, the new drive is nowhere to be found.Now, I know (or at least assume) this new drive probably needs to be formatted, but shouldn't it show up within Windows Explorer even in a pre-formatted state?
I'm having some trouble getting an external hard drive to be recognized by my computer. I have quite a few already, but I got another one because one of them won't read on my comp, although it will read on my netbook. The new drive I got has the same issue, no go on the comp, but works fine on the netbook.
I tried unplugging all of the other drives and even using the other cables to connect the new drive, but Windows 7 simply won't recognize it being plugged in. No "badump" sound and no icon in My Computer. Tried restarting, nothing. I tried it in all six of my computer's USB ports, but got no better result.
I built a new computer. Rather expensive, but it should perform well. -Anyway-, I bought a brand new hard drive with the expectation of installing windows 7 on it and then working from there. The hard drive is recognized in the BIOS, the CMOS, and anything at all I've checked, but when I put the windows 7 64 bit disk in and try to do a custom install, seeing as I have nothing on the disk from which to upgrade, my hard drive does not show up in the section in which 7 asks where I want to install.
Motherboard is GIGABYTE GA-X58A-UD3R LGA 1366 Intel X58 SATA 6Gb/s USB 3.0 ATX Intel Motherboard, hard drive is Western Digital Caviar Black WD1001FALS 1TB 7200 RPM SATA 3.0Gb/s 3.5" Internal Hard Drive.
The hard drive is plugged into the top SATA port (It has like, 10).
I`ve got a serious problem with my vaio. i was surfing the net that i faced a BAD SECTOR ERROR on system 32. As I closed the ERROR,the system restarted. When I select the windows 7 to boot, the windows logo page come and restart again and again.Even when i decided to install a new version or repair it,the installation found no drive to install on.\
I use an WD external hard drive (1TB) for additional storage and it was working fine with no issues. The small USB connector broke off the board yesterday and I purchased a new enclosure and installed it. Now my computer does not recognize it as a storage device. I have all the data still on the HD and really do not want to loose it. I tried adding a letter for the drive, but it does not show up to change the letter of the drive.
I have a WD My Book 110 External Hard Drive and when I plug it in and go to my computer to access the files on it the drive doesn't show, but if I go to the start menu and type b: in the search box it shows the files and the drive also shows in Disk Management, so why isn't it showing in My Computer and how can I get it to show?
i have been trying unsuccessfully using anydvd, dvdclone, handbrake to copy dvd to the hard drive. I wish to compress the data removing surplus subtitles, languages, etc to keep the file size to a minimum but always end up with the film split in several files. Please can someone advise how i can copy the dvd into one file for viewing on the Aspire one?
The model is 532h. The hard drive went bad so I replaced it with a brand new hard drive that's smaller in size (120GB vs original 160GB). I first cloned the recovery partition "PQSERVICE" to the new hard drive and then install it, ran alt+F10 but it shows "no bootable device". Alt + F10 worked with the old hard drive and the recovery ran fine but because the drive is bad it gave an error at the end. With the new hard drive the alt+F10 doesn't work at all. I checked in the BIOS and it's there. I changed the partition type to active but still get the same error. I finally use the recovery disk, wiped out everything and the recovery went through till the end (it said successfully) but after reboot I still get "no bootable device" error.
I created a partition and installed XP on it and the game installs correctly (installation wouldn't even start on Win7) and it runs. However, the drivers I got when I bought the laptop are only compatible with Win7 (video drivers, wifi/lan drivers, the audio driver works fine on XP however).Because of this driver problem, I have no graphics driver to run the game (I know it works because I can start the game and hear the audio). I also couldn't connect to the internet to find and update drivers on that specific machine.
So I searched for them on another computer but after hours of searching, downloading and transferring the files to my Acer, failed to find any compatible with XP.The Acer website which I downloaded these drivers from mentions they work on XP in the description but they wouldn't install, giving the error 'not support on this operating system' or similar.FYI the hardware for the drivers I needed were: - Lite-on Wireless LAN 3rd WiFi BGN Atheros HB97 (OR Broadcom LAN BCM57780 for ethernet connection)- Intel VGA Chip UMAHas
I have a Seagate External Hard drive, Desk Goflex 3 TB.I'm using it for sevral mounth in windows 7 and it's working fine.Now, I bought a new latop using windows 7 as well, and it's not recognizing my hard drive.The hard drive doesn't appear in the Disk Management at all.The computer does recognize other USB devices (disk-on-keys, mouse).
I have been using my WD External Hard Drive in my new Windows 7 desktop. Everything was working fine until this morning, my external HD stopped responding. Everytime I connect external HD to my desktop, I get " You need to format the disk H: before you can use it".
I've tried changing the drive name as well but with no success.
I have a Seagate GoFlex Desk 3TB external hard drive. I got it about.. 6 months ago and I've never had a problem with it up until last week. I plugged it in and it started making a normal fan sound like is usually does, then after a few seconds it stopped which made it seem like it was shut off.
My problem is that after turning on the power for the very first time, it will not recognize my keyboard. I have several different keyboards and I tried them all- including the Acer keyboard that came with the PC.I think my mistake was that before turning on the power, I had plugged in both an HDMI connection to my TV as well as a DVI connection to an Acer 23" monitor. Then when I powered up the PC, it defaulted to the HDMI output but I didn't realize that and was expecting it to displa on the monitor.It took me a while to figure out that it defaulted to the HDMI connection. I started out by looking at my monitor and couldn't figure out why there was no activity on the monitor. But once I switched the TV input to "HDMI 1", I saw the output was displayed on my TV.Unfortunately, it doesn't seem to recognize any keyboard now although it does make a "clicking" sound when I press keys on the keyboard. I tried to press WIN+P to change the HDMI output to show the same output on both the TV and the monitor but it seems to default to "side by side" and the only thing that I can think to do now is to pull out the power cord plug and try to re-boot with just the monitor connected and without the HDMI connection.When I hit the "power off" button, it has no effect. Should I pull out the power cord from the outlet? Or is there some other way to get it to reboot?
I have a Windows 7 Laptop which i bought in January, at the same time i bought a WD 2TB external hard drive to back up all my files onto (last laptop broke and i lost everything so decided to keep everything off the laptop itself).
I was running windows seven and my HD started failing so I bought a new one and had it shipped in. After recieving it today I backed up my old HD on to a My Passport I had lying around created my repair disk and set out to restore my new blank HD. When I got to the startup and repair menu I clicked restore from image and my computer scanned and could not find an image to restore from. The external is plugged in and I can see the backup files when it gives me the option to look for drivers but it wont recognize the external to let me load the files from it.
i took out the hard drive from my laptop that had a BSOD and can't boot. I boutght an enclosure n plugged it using usb to another laptop so i can get my files, but when i click on the disk a window pops up saying disk is not formatted..i dont want to lose my files si i downloaded tesdisk. When i choose "Analyse" it seems that it finds four partitions, but above each one there's a warning "Incorrect number of heads/cylinders 255 (NFTS) ! =240 (HD) or Bad sector head and Bad Ending Head and Bad Starting head..I dont know what to do next.
I am running an HP Compaq 8510w with Windows 7 Enteprise. When I first got the laptop the USB ports didn't recognise devices when they were plugged in, and the laptop would just hang when shutting down (on the Windows Shutting Down screen), so I decided to reinstall the OS as there was a lot of unnecessary applications installed.
I've been using the laptop since the rebuild and all has been good, until the past week or so when the same two problems have materialised again - when I attach a PSP, or a printer via USB, they are not recognised. And when I shut the laptop down, it hangs on the Shutting Down screen.
What checks can I run to see what the cause of this might be? I've not really installed a load of software on here, and I can't think of anything specific that I may have done that would cause this...
My 1.5TB USB( using the EZ-dock adapter) drive is about full, and I'm looking at a 3GB drive to replace it. My system is a Netbook with USB 2.0 as the only external drive interface so that limits my options considerably if I want to keep it to something I can throw into my suitcase easily when travelling.
My laptop does not read my new external hard disk drive using USB connection. The sign "Safely remove hardware and eject media" is there. But the icon of the hard drive doesn't appear in the "Computer".
Recently my laptop crashed beyond repair, and has had to be rebuilt. It now operates on Windows 7.Luckily I had backed up some important files onto a portable external Lacie Hardrive. I now need to return some of the files back to the laptop so that I can use them..but I can't seem to find a way to do it!! I suppose I'm just being 'thick'..but can anyone tell me how to do it.