Windows Explorer Doesn't Recognize Added Hard Drive
Aug 1, 2012
I recently attempted to add a hard drive to my Lenovo W520 laptop using a CD/DVD caddy accessory designed to hold a SATA hard drive.Windows recognized the new device and according to its messages, automatically installed the required device drivers. However, when I go into Windows Explorer, the new drive is nowhere to be found.Now, I know (or at least assume) this new drive probably needs to be formatted, but shouldn't it show up within Windows Explorer even in a pre-formatted state?
View 4 Replies
ADVERTISEMENT
Oct 1, 2010
My mother asked me to fix her computer, his window XP is badly corrupted, so I tried to install Window 7 on her computer. However, the hard drive didn't show on the screen. I found it quite odd because BIOS detected it as IDE driver, and it's a SATA driver. I tried to install with old Window XP installation CD. Same thing, doesn't show on the window XP installation screen either.
I tried to hook hard drive on other computer, and was testing with Window 7 XD and see if it was working, and it did. It shown on the disk screen. My guess that it's probably the BIOS that occurred, or perhaps other things. I have one hard drive, nothing more.
View 9 Replies
View Related
Aug 14, 2012
I have my WD75 Caviar Black 750G from my old computer it has all my files on it and it will not let me plug it in and look through it probably because the original computer was Win XP. Is there anyway to get the information off of the harddrive?
View 2 Replies
View Related
Mar 28, 2011
my laptop acer aspire doesnt recognize my external hard drive in windows7. I will be great ful to them. it doesn't show any external hard drive but it shows pen drive and mobile usb cable but not external hard disk
View 1 Replies
View Related
Jan 30, 2010
I built a new computer. Rather expensive, but it should perform well. -Anyway-, I bought a brand new hard drive with the expectation of installing windows 7 on it and then working from there. The hard drive is recognized in the BIOS, the CMOS, and anything at all I've checked, but when I put the windows 7 64 bit disk in and try to do a custom install, seeing as I have nothing on the disk from which to upgrade, my hard drive does not show up in the section in which 7 asks where I want to install.
Motherboard is GIGABYTE GA-X58A-UD3R LGA 1366 Intel X58 SATA 6Gb/s USB 3.0 ATX Intel Motherboard, hard drive is Western Digital Caviar Black WD1001FALS 1TB 7200 RPM SATA 3.0Gb/s 3.5" Internal Hard Drive.
The hard drive is plugged into the top SATA port (It has like, 10).
What can I do?
View 27 Replies
View Related
Jun 11, 2011
I`ve got a serious problem with my vaio. i was surfing the net that i faced a BAD SECTOR ERROR on system 32. As I closed the ERROR,the system restarted. When I select the windows 7 to boot, the windows logo page come and restart again and again.Even when i decided to install a new version or repair it,the installation found no drive to install on.\
View 1 Replies
View Related
Oct 5, 2011
have an acer veriton, trying to hook up an external cd/dvd drive.
View 4 Replies
View Related
Nov 29, 2012
Most of CDs and DVDs are working fine, but there are some which my DVD RW doesn't recognize. When I insert them, it doesn't react at all or it says that CD/DVD is blank. These CDs and DVDs are working without any problems on my old computer with Windows XP and also on my brother's laptop with Windows XP.
View 4 Replies
View Related
Mar 5, 2011
I am building a computer fort the first time and I am having trouble getting Windows 7 to recognize my hard drive. My har drive and mother board are as follows: Hard drive-Seagate Barracuda 7200.12 ST3500418AS 500GB 7200 RPM 16MB Cache SATA 3.0Gb/s 3.5" Internal Hard Drive -Bare Drive, Mother Board-GIGABYTE GA-870A-UD3 AM3 AMD 870 SATA 6Gb/s USB 3.0 ATX AMD Motherboard when I go to install windows 7 I eventually get to a screen where it ask for an install location, unfortunately it doesn�t seem to recognize my hard drive. It gives me an option of installing driver so I went to the gigabyte website and downloaded the drivers that it said I required. I believe there was an ACHI driver and a Raid driver. After I stalled both of these drivers the hard drive still was not detected. One strange thing I noticed was that when I browse for a driver my hard drive is listed as a place I can search. I then proceeded to the Bios to try and match the drivers. The hard drive is detected in the Bio. When the HD is set to IDE my BluRay play is able to read the windows install disc. But windows won�t recognize my HD. If I set it to ACHI or Raid I can�t seem to get the windows CD to load. Do I need an IDE driver? Out of frustration I tried installing a windows XP to see if it would be able to recognize my hard drive. It seemed to load on the hard drive fine but entered this weird loop where windows would install itself but wouldn�t actually load as the operating system. In other words when I try to restart my computer and run the OS off of my hard drive it gave me an error message. Something like (windows OS could not be located) When I went to go install windows 7 again my hard drive still was not detected as a place to intall windows but when I search the hard drive (as if I was searching for a driver) I can see the Windows files that were loaded from when I tried to install XP.
View 5 Replies
View Related
Aug 7, 2012
For some reason my HP Laptop (Win 7 Home Premium) can't see/recognize my usb external hard drive (seagate). When I start/restart my computer and connected the usb cable into laptop, it shows the icon on bottom taskbar (safely remove hardware and when clicked on the usb icon, I see "open Devices & Printers and Eject USB to IDE bridge), but I can't see my drive at all when I click on "my computer"? I can only see it under "right click Computer, Manage, Device Manger, Disk Drives," it only says; "generic USB Disk USB Device". And when I expanded the USB controllers via Device Manager, I can see it under USB Mass Storage Device. Sadly, I can't do much there/here unless Win 7 can see/recognize the drive under "My Computer".<> HD is 40GB IDE Seagate (enclosure is PowerSpec 3.5 IDE to USB 2.0)<> Drive is only storage for data, documents, pictures and softwares/programs, etc.<> Drive is/was not formattedAgain, this drive was never formatted, only for storage purpose (i.e. pictures, documents, data, etc.). I can see it on my old computer when connected internal via IDE cable.
View 7 Replies
View Related
Mar 5, 2011
I am building a computer fort the first time and I am having trouble getting Windows 7 to recognize my hard drive. My har drive and mother board are as follows: Hard drive-Seagate Barracuda 7200.12 ST3500418AS 500GB 7200 RPM 16MB Cache SATA 3.0Gb/s 3.5" Internal Hard Drive -Bare Drive, Mother Board-GIGABYTE GA-870A-UD3 AM3 AMD 870 SATA 6Gb/s USB 3.0 ATX AMD Motherboard..So when I go to install windows 7 I eventually get to a screen where it ask for an install location, unfortunately it doesn't seem to recognize my hard drive. It gives me an option of installing driver so I went to the gigabyte website and downloaded the drivers that it said I required. I believe there was an AHCI driver and a Raid driver. After I stalled both of these drivers the hard drive still was not detected. One strange thing I noticed was that when I browse for a driver my hard drive is listed as a place I can search. I then proceeded to the Bios to try and match the drivers.The hard drive is detected in the Bio. When the HD is set to IDE my BluRay play is able to read the windows install disc. But windows won't recognize my HD. If I set it to AHCI or Raid I can't seem to get the windows CD to load. Do I need an IDE driver? Out of frustration I tried installing a windows XP to see if it would be able to recognize my hard drive. It seemed to load on the hard drive fine but entered this weird loop where windows would install itself but wouldn't actually load as the operating system. In other words when I try to restart my computer and run the OS off of my hard drive it gave me an error message. Something like (windows OS could not be located) When I went to go install windows 7 again my hard drive still was not detected as a place to intall windows but when I search the hard drive (as if I was searching for a driver) I can see the Windows files that were loaded from when I tried to install XP.
View 3 Replies
View Related
Jul 11, 2011
I have a Seagate external hard drive filled with photos from a mac. I am now trying to copy those onto a pc. Windows does not recognize the drive
View 5 Replies
View Related
Jul 26, 2012
computer will not recognize windows 7 on my usb hard drive when I try to boot from it. I go into bios and select usb hard drive but it goes on with its normal routine. Need to reinstall windows on a computer that I am locked out of.
View 9 Replies
View Related
Apr 1, 2012
I recently installed windows 7 home premium 64 bit, previous OS was Vista home premium 32 bit. My desktop is an HP pavilion d4650y. I have the OS loaded on my main HD which is a SATA.
HD & DVD drive worked perfectly before on vista. I tested both devices on another pc with XP and they work fine. I've triple checked the connections but still the devices are not recognized by Windows 7. I've also tried renaming the HD & changing the drive letter, but still no luck.
Both drives are connected to a PCI E card, and are set to cable select, on separate cables. In the BIOS both drives show up. In disk management they do not show up at all.
My HD is a western digital 250 gb EIDE, and the DVD drive is a IDE Pioneer DVD burner (secondary disc drive).
View 5 Replies
View Related
May 21, 2009
I'm using the release candidate and whenever I plug in my Western Digital Passport USB external hard drive, I get nothing. It doesn't show up in device manager or in My Computer. The light on the harddrive comes on and the drive spins up, so I know it's working. Windows just won't recognize it.
View 9 Replies
View Related
Nov 28, 2012
I have just finished my first build and everything was going fine until I tried to install Windows 7. I got through the first couple menus, then when I get to the part where I have to save the OS in a storage device, it does not detect my hard drive.
Specs:
Gigabyte Intel GA Z77X-U3H
Intel core i5 2500k
WD Caviar Black 1TB SATA 3 7200 rpm
Btw the HDD appears in the Bios.
View 10 Replies
View Related
Aug 20, 2011
Today I did a clean install of Windows 7 on a 64 GB SSD. While it was installing my 1 TB secondary drive was not connected.
After everything was finished I connected the Second Drive. It can be seen in devices, but I am not allowed to access it. I have checked disk managment under Adminstrative tools and it is also not there.
View 3 Replies
View Related
Jul 22, 2011
I'm having some trouble getting an external hard drive to be recognized by my computer. I have quite a few already, but I got another one because one of them won't read on my comp, although it will read on my netbook. The new drive I got has the same issue, no go on the comp, but works fine on the netbook.
I tried unplugging all of the other drives and even using the other cables to connect the new drive, but Windows 7 simply won't recognize it being plugged in. No "badump" sound and no icon in My Computer. Tried restarting, nothing. I tried it in all six of my computer's USB ports, but got no better result.
View 10 Replies
View Related
Sep 26, 2011
I am a MAC user but for a project I have to upload something on a PC...the external hard drive is recognized by the computer but I cant see the files on it...it is fine when I hook it up to the Mac..
View 1 Replies
View Related
Dec 9, 2011
I had an internet problem with windows 7 ultimate 64bit, so i decided to format it. I had one windows drive (SAMSUNG 250GB) and one storage drive (HITACHI 1TB) which has 900GB of important data on it. I chose custom installation onto my old windows drive (samsung) and it installed with no problems. I didn't touch my other drive. now, i can't see my 1tb storage drive in computers or in drive manager, but i can still see it in device manager! What should i do?? i really don't want to format it, but if the data is gone then i will have to.
View 5 Replies
View Related
Jan 2, 2012
I use an WD external hard drive (1TB) for additional storage and it was working fine with no issues. The small USB connector broke off the board yesterday and I purchased a new enclosure and installed it. Now my computer does not recognize it as a storage device. I have all the data still on the HD and really do not want to loose it. I tried adding a letter for the drive, but it does not show up to change the letter of the drive.
View 3 Replies
View Related
Nov 10, 2011
I have an Asus Z68 mainboard with UEFI-BIOS. Windows 7 Professional 64bit is installed in UEFI mode on a GPT partitioned drive (SSD). It worked flawlessly.Now I added my second, old harddrive, that is still MBR formatted.Windows won't start anymore, instead I am seeing "Windows is loading files", then a blinking cursor, and that's all.I have two options in BIOS regarding boot priority:
1) I can boot from the SSD as primary priority
2) I can select an option called "Windows Boot loader", I think this refers to the UEFI boot code that Windows wrote to the UEFI.
If I select the first option, I get the "Windows is loading files screen" and then the "Windows has detected a startup error, do you want to repair the system startup" screen. If I select "Start Windows normally", I get a blinking cursor and then nothing. If I select "Repair startup", I see "Windows is loading files", and then again the "Startup repair screen". It is an endless loop.If I select the second option, I get "Windows is loading files", then a blinking cursor, and nothing more.Is there any way to get my Windows to boot again without disconnecting or re-partitioning the old harddrive? Note that the old harddrive is NOT for booting, as it is just a datastore.
View 2 Replies
View Related
Feb 17, 2011
Here's my hard drive: Seagate Constellation ES ST3500514NS
I haven't been able to get Windows 7 installation to detect this drive for about two months now. I'm running on a Gigabyte GA-880GA-UD3H mobo, revision 2.1.
I recently found a list of drivers for my motherboard on Gigabyte. I also found some downloads for my hard drive.
Oh, and I can use this drive if I'm running Windows 7 on a different hard drive, but I just can't install Windows 7 on it.
View 5 Replies
View Related
Jun 14, 2012
y motherboard Asus P8Z77-V LX can handle up to 32 GB of DDR3 1600mhz.I did do a "memtest" on all of my 16GB DDR3 1600mhz, 10 passes, 10 hours and no errors. I had my original 4 GB still in the computer as I had to remove the other ram to install Windows 7. Once windows was installed I ran it with just the 4 GB for a few days to make sure everything was working which it was. So I then re-installed the remaining 12 GB of ram and then right away windows explorer kept crashing. I removed the 12GB I just put in and reinstalled each stick separately with the original 4 GB so each time there was 8 GB of ram installed with no problems at all.So what gives ???Is there a default setting somewhere that is limiting my memory?
View 9 Replies
View Related
May 22, 2011
I have a WD My Book 110 External Hard Drive and when I plug it in and go to my computer to access the files on it the drive doesn't show, but if I go to the start menu and type b: in the search box it shows the files and the drive also shows in Disk Management, so why isn't it showing in My Computer and how can I get it to show?
View 9 Replies
View Related
Jan 4, 2012
So my trusty old 40 GB Maxtor HDD finally died, and I'm trying to install Windows 7 on a 250 GB Western Digital Caviar SE 16 (SATA II). Windows will boot off of the DVD, load the setup, ask me if I want to perform an install or a repair, and then it asks if I want to upgrade or do a "custom" setup. I choose custom since it's a clean drive, but then it shows me a blank list of drives with the option to load a driver. My motherboard is a Gigabyte GA-G41M-ES2H, so I went to Gigabyte's website and downloaded the drivers and put them on a USB thumb drive. I spent hours trying to load different drivers to no avail. I tried the CD that came with the motherboard; no dice. I tried 32 and 64 bit installations; neither worked.
But you know what did work? My 180-day trial copy of Windows Server 2003. It detected that hard drive like Western Digital made it just for 2003.
View 9 Replies
View Related
Aug 5, 2011
I am always manipulation files between several folders so I have several iterations of Windows Explorer open when my computer boots up and showing the contents of the folders that I manipulate all the time. Using XP files moved or copied into another folder always appeared at the bottom of the explorer window and that was good because although they were out of alphabetical order I always knew where to find the new files in the explorer window. They would stay at the bottom until I clicked 'Refresh' or changed the focus to another folder or shut down that explorer. Windows 7 explorer behaves differently and places new files in alphabetical order. Is there a way it can be changed so that new files show at the bottom of the explorer window?
View 2 Replies
View Related
Jul 4, 2011
I have an external Samsung 640Gb hard drive which is not showing up in Windows Explorer, even though Device Manager shows it as recognized and working properly. I am running Windows 7 Home and this is something new as when I bought the drive it showed up in Explorer. I really need this drive as all my backups and programs are on it!
View 3 Replies
View Related
Dec 23, 2009
I just installed windows 7 on a home built desktop. Everything seems to be running fine except my 3rd hard drive won't show up. In device manager it shows all 3 hard drives, but in My Computer it only shows 2.
The hard drive that isn't showing up in My Computer (but showing up in Device Manager), is a Seagate Barracuda 7200.12 1 TB.
The hard drives that are showing up are both Seagate Barracuda 7200.11 but one is a 500 GB the other is a 750 GB.
View 3 Replies
View Related
Oct 29, 2009
I had Windows XP, then installed Windows 7 32bit Ultimate on IDE hard drive.
HOW CAN I FORMAT THE IDE HARD DRIVE SO AS TO DO A CLEAN INSTALL?
When putting CD in and pressing Intall. I wanted to Format my 40Gig IDE hard drive (that I use for windows intallation only). So as to start CLEAN install.
The CD recognised my hard drives. 250Gig SATA and 40Gig IDE....however would not let me format either or change in any way.....something about load driver?? VIA 6140 something.
So instead I thought to boot the disk and try that way. It didnt recognise the IDE hard drive at all. anyway I chose to do it the first way once I found that driver I mentioned.
I installed windows on woindows, then deleted the windows.old file afterwords.
View 4 Replies
View Related
Oct 8, 2011
I set the hard drive to stop spinning after 4 hours of idle activity but it doesn't ever go to sleep. If I set the time interval to < 1 hour like 45 min then it will go to sleep.
I'm not talking about the computer going to sleep/hibernating, I mean the spinning of the hard drive.
View 5 Replies
View Related
