I have been using my WD External Hard Drive in my new Windows 7 desktop. Everything was working fine until this morning, my external HD stopped responding. Everytime I connect external HD to my desktop, I get " You need to format the disk H: before you can use it".
I've tried changing the drive name as well but with no success.
my laptop acer aspire doesnt recognize my external hard drive in windows7. I will be great ful to them. it doesn't show any external hard drive but it shows pen drive and mobile usb cable but not external hard disk
View 1 Replies View RelatedI was running windows seven and my HD started failing so I bought a new one and had it shipped in. After recieving it today I backed up my old HD on to a My Passport I had lying around created my repair disk and set out to restore my new blank HD. When I got to the startup and repair menu I clicked restore from image and my computer scanned and could not find an image to restore from. The external is plugged in and I can see the backup files when it gives me the option to look for drivers but it wont recognize the external to let me load the files from it.
View 2 Replies View RelatedHow do I get my Windows 7 to read both RAM 1 gig each. total of 2 it only recognizing 1 gig?
View 2 Replies View RelatedWindows 7 doesn't recognize my D partition though windows XP used to recognize it just fine on my computer, and it also used to work fine on that HDD using that same version of windows 7 on my old computer. My computer is a Dell Optiplex 745 and my HDD is WD10EARS (No Jumpers is being used) Here is a Screen of the installation Process
View 2 Replies View RelatedWhen I insert a disk, the OS reads it correctly, and I can do whatever with it. However when I remove it, Windows still shows the disk is inserted, and inserting another disk causes any program that tries to access it to hang indefinitely (including individual windows explorer instances).
After several hours of google and trying various fixes (including removing the drivers for the dvd-drive and ATA Channel 0-5, disabling windows native burn capabilities, uninstalling CyberLink PowerDVD 8 and Nero Express 9, and everything in this thread), I've got it so that the drive recognizes a single removal of CD/DVD and insertion of a new CD/DVD, however the second time it still gets stuck.
I'm on an Alienware m17x with a TS-T633A DVDRW.
I am trying to upgrade my dad's Dell Inspiron 530S to WIn 7. I have chosen removable from the boot menu for the 1st 2nd and 3rd options, but the USB keeps getting passed over on start-up. I cannot see any menu functionality that lets me add USB. Right now removable is listed as floppy disk. He is on BIOS 1.0.13 (just upgraded to 1.0.18 same issue) running Win XP service Pack 3.
View 7 Replies View RelatedI'm trying to do a clean install of windows 7 (by booting the computer into the CD) but no drives show up. This usually happens to me so no big deal. The problem is.. recently I got a "new" computer, made out of old parts of other computers. SO i have no drivers CD.. So i have no SATA drivers...I tried to download about 30 so far with no luck. Simply because I have no idea what I should download.I simply don't know if sata drivers come from the HDD i have, from the motherboard, from the chip of the motherboard.. i have no clue.Here's my computer info you may need:I've seen posts saying to in the bios change from whatever I have to IDE or to something else, but I have no clue what that does so i would rather avoid it if possible. If there's no other solution, what does it actually do if i change from SATA to something else? (if its even SATA what I have).
View 9 Replies View RelatedI recently installed Windows 7 Ult. 64-bit on my new Asus G50vt-x5 laptop. I am unable to get my Officejet K60 to work with it, though every website I've gone to says that it should automatically show up when it's plugged in. The printer still works as a standalone copier, and it worked with my previous computer -- an Xp Pro system.
View 9 Replies View Relatedhave an acer veriton, trying to hook up an external cd/dvd drive.
View 4 Replies View RelatedWindows 7 doesn't recognize my WD HDD during installation?trouble shooting:This is what i did..... I took a laptop hdd and placed it into my desktop. I booted my desktop with the laptop hdd. I then placed the WD HDD ( the one that i've been having trouble with) as a second hard drive. I noticed that windows recognized the WD HDD and could write to it. I also reformatted the WD HDD. I then tried to run the windows installation from my laptop hdd so i could install it on my WD HDD and once again it didn't recognize it. I thought maybe i could clone my laptop HDD to my WD HDD with Acronis "clone software" and it couldn't recognize the WD HDD as well. This is frustrating...... Why can i write to the WD HDD but cant install the OS.
View 2 Replies View RelatedI have an OCZ SSD in my system. It works fine, I have tested on it other systems, and I am able to install Windows XP and Ubuntu on it. When I put in a Windows 7 disk it does not show my SSD. I have 2 different disks and both have the same problem. One is an old disk without SP1, one is a new one with SP1. I have tried different SATA wires and different SATA ports all tested and working on both other systems, and the same system under a different OS. Running in either AHCI or RAID doesn't let my system start from disk. When I click Custom and get the the screen where I partition my drive it does not show anything. It is completely blank. Despite the fact that my drive works under every other circumstance I can create.
View 4 Replies View RelatedI am running an HP Compaq 8510w with Windows 7 Enteprise. When I first got the laptop the USB ports didn't recognise devices when they were plugged in, and the laptop would just hang when shutting down (on the Windows Shutting Down screen), so I decided to reinstall the OS as there was a lot of unnecessary applications installed.
I've been using the laptop since the rebuild and all has been good, until the past week or so when the same two problems have materialised again - when I attach a PSP, or a printer via USB, they are not recognised. And when I shut the laptop down, it hangs on the Shutting Down screen.
What checks can I run to see what the cause of this might be? I've not really installed a load of software on here, and I can't think of anything specific that I may have done that would cause this...
I have an external USB drive attached to a Windows 7 Ultimate box. The USB drive has video files that I stream to my Samsung TV using DLNThe setup works except last night when I copied over .MP4 files to the USB drive. For this file extension, the files did not show as playable over DLNA. Is there a way to enable the setup to recognize this file extension?
View 1 Replies View RelatedI have a umax powerlook 1000 with large transparency adaptor. It previously worked on my win 2000 system but i had to upgrade to win7. I tried changing the compatibility tab to win 2000 and loaded the magaiscan 4.7 which runs but the computer simply can't find the scanner.
View 2 Replies View Relatedlooking for dvd rw driver for my dell optiplex 330;hl-dt-st dvd=_rw gsa-h73n ata device. not reading all cd/dvds since upgrade to windows 7
View 1 Replies View RelatedI have a Windows 7 Disc that I've used in the past, but I'm planning on building a new rig in about a month or two and I'm just planning a little bit. So my problem is that my computer doesn't seem to recognize my CD during the boot. It use to ask me press a button to boot from CD but no longer does and but I can run the CD after my computer has booted to my desktop so that means It can't be the CD nor the CD drive correct? I do have the boot order set for the CD-ROM first.
View 13 Replies View RelatedMy 1.5TB USB( using the EZ-dock adapter) drive is about full, and I'm looking at a 3GB drive to replace it. My system is a Netbook with USB 2.0 as the only external drive interface so that limits my options considerably if I want to keep it to something I can throw into my suitcase easily when travelling.
View 1 Replies View Relatedi recently tried to upgrade my computer by installing a new OCZ Agility III SSD. I didn't really want to reinstall windows as it is an OEM install and I dont have the disk. I therefore took the supposedly easy way out and bought a OCZ SSD Upgrade kit which contained Acronis True Image HD software to "Easily Clone and Transfer Data" as per the front of the box.The existing drives were 2 Seagate 500GB drive in a RAID0 Configuration All seemed to go well with cloning the drive, booting off the SSD until I noticed that no mass storage devices I have were being recognised anymore, all of which worked perfectly with the old RAID0 drives.
I have tried everything that I can find on this forum to no avail, however, I am not a computer expert, but a reasonably competent home user. On my motherboard (Foxconn H67MP), I have 2 yellow and 4 blue SATA ports. At the moment, I have the SSD in a blue port and have left the old disks in a RAID array on the yellow ones as I think they are the only ports that support RAID. During the installation, I repartitioned the RAID drives to create a backup partition which may or may not be relevant?I have 3 External HD, 2 WD and an Iomega all of which worked before installing the SSD. The WDs are USB powered and the Iomega (shows in device manager as Samsung HD503HI) is externally powered but none of them show in disk management. I can see the drives in device manager with a yellow warning triangle, however not in disk management. I have tried uninstalling the drives, the USB controllers, disabling power management?
My mother asked me to fix her computer, his window XP is badly corrupted, so I tried to install Window 7 on her computer. However, the hard drive didn't show on the screen. I found it quite odd because BIOS detected it as IDE driver, and it's a SATA driver. I tried to install with old Window XP installation CD. Same thing, doesn't show on the window XP installation screen either.
I tried to hook hard drive on other computer, and was testing with Window 7 XD and see if it was working, and it did. It shown on the disk screen. My guess that it's probably the BIOS that occurred, or perhaps other things. I have one hard drive, nothing more.
I have been looking for a Windows 7 driver for a NVIDIA Geforce Go 6800for an Alienware Area-51 M7700 laptop. Every driver that I download from NVIDIA's website gives me the error message during the installation that it cannot find a
driver compatible with my hardware. Windows 7 has installed a generic "standard VGA adapter" which does not allow for aero functionality
My netbook that uses windows 7 starter cannot detect any of the flash drives and has display troubles cause everytime restart its display will be in windows classic. Should I take it to be repaired??
View 1 Replies View RelatedI have my WD75 Caviar Black 750G from my old computer it has all my files on it and it will not let me plug it in and look through it probably because the original computer was Win XP. Is there anyway to get the information off of the harddrive?
View 2 Replies View RelatedI've been all over the net trying to resolve this issue, and found many hotfixes,downloads from Microsoft and manufacturer, but to no avail. My external drive was recognized for the first month. Then, very suddenly, Windows 7 doesn't recognize it. It sees it, but prompts a "Need to Format before first use". It has 300G already used with valuable info.Tried moving the external hard drive to our home PC with Windows XP and the same "Need to Format" message is prompted. If I hook it up on my wife's MAC, I can see the data. Now I have read that this is a known issue with the 64bit version of Windows and external drive. I have already all the KB976972 and KB977074 download fixes from Microsoft. I have also tried to uninstall the drive, unplug it, turn it off, restarting Windows, and plugging back the drive, but I have the formatting prompt again. And if I choose to not format, i have an error message DATA ERROR (CYCLIC REDUNDANCY CHECK).**This does not seem to be an issue regarding only the WD drives but all drives**Called WD tech, and it was useless. Does anyone have a fix? A link to share? An idea? I'm running Windows 7 Ultimate 64bit on my HP Pavilion a6418f.
View 8 Replies View RelatedFor some reason my HP Laptop (Win 7 Home Premium) can't see/recognize my usb external hard drive (seagate). When I start/restart my computer and connected the usb cable into laptop, it shows the icon on bottom taskbar (safely remove hardware and when clicked on the usb icon, I see "open Devices & Printers and Eject USB to IDE bridge), but I can't see my drive at all when I click on "my computer"? I can only see it under "right click Computer, Manage, Device Manger, Disk Drives," it only says; "generic USB Disk USB Device". And when I expanded the USB controllers via Device Manager, I can see it under USB Mass Storage Device. Sadly, I can't do much there/here unless Win 7 can see/recognize the drive under "My Computer".<> HD is 40GB IDE Seagate (enclosure is PowerSpec 3.5 IDE to USB 2.0)<> Drive is only storage for data, documents, pictures and softwares/programs, etc.<> Drive is/was not formattedAgain, this drive was never formatted, only for storage purpose (i.e. pictures, documents, data, etc.). I can see it on my old computer when connected internal via IDE cable.
View 7 Replies View Relatedi cant run any commands in command prompt.i have checked a lot of stuff on inet to solve like paths @environment variables etc but i still couldnt solve it.i thought maybe its cuz a system file is missing made a repair disc but couldnt run sfc via command prompt at boot because i got this error saying "thıs verıson of system recovery ıs not compatible with the version of windows you are trying to repair"
View 9 Replies View RelatedWindows Doesnt recognize my video card Ati radeon 5650 HD, it just says stantard video card for windows, neither my monitor its recognice....
I installed the driver many times , My pc is SONY VAIO Vpcef2s1e , i even downloaded the driver from sony site and still doesnt work...
My windwos is URALSOFT WINDOWS 7 ULTIMATE x64
I recently attempted to add a hard drive to my Lenovo W520 laptop using a CD/DVD caddy accessory designed to hold a SATA hard drive.Windows recognized the new device and according to its messages, automatically installed the required device drivers. However, when I go into Windows Explorer, the new drive is nowhere to be found.Now, I know (or at least assume) this new drive probably needs to be formatted, but shouldn't it show up within Windows Explorer even in a pre-formatted state?
View 4 Replies View RelatedI'm using the release candidate and whenever I plug in my Western Digital Passport USB external hard drive, I get nothing. It doesn't show up in device manager or in My Computer. The light on the harddrive comes on and the drive spins up, so I know it's working. Windows just won't recognize it.
View 9 Replies View RelatedI have a HP Pavilion dm1z laptop. The laptop has a HDMI port. I am trying to connect it to my Samsung BX2335 display. The display has the DVI dual link port only. So I bought a HDMI - DVI adapter.I have Win7 x64 on my laptop.When I start the laptop with the external display connected, the picture is duplicated on both the laptop and the external display. But as soon as Windows starts, the picture will only be displayed on the laptop, 'Starting Windows' being the last picture shown on both displays.After some investigation it seems that windows could not detect the external display successfully. In the 'Screen Resolution' window the external display is shown as 'Display the device on: VGA'. It is impossible to view the properties of the external display, as the option is disabled, and the display is called 'Default Monitor'.I tried updating the AMD Radeon Catalyst drivers, but this did not help. Tried to install the external display drivers, but these installed as the mobile device display drivers.
View 1 Replies View RelatedI have a HP Pavilion dm1z laptop. The laptop has a HDMI port. I am trying to connect it to my Samsung BX2335 display. The display has the DVI dual link port only. So I bought a HDMI - DVI adapter. I have Windows 7 x64 on my laptop. When I start the laptop with the external display connected, the picture is duplicated on both the laptop and the external display. But as soon as Windows starts, the picture will only be displayed on the laptop, 'Starting Windows' being the last picture shown on both displays. After some investigation it seems that windows could not detect the external display successfully. In the 'Screen Resolution' window the external display is shown as 'Display the device on: VGA'. It is impossible to view the properties of the external display, as the option is disabled, and the display is called 'Default Monitor'. I tried updating the AMD Radeon Catalyst drivers, but this did not help. Tried to install the external display drivers, but these installed as the mobile device display drivers.
View 1 Replies View Related
