Windows 7 Laptop Doesn't Recognize All Of Flash Drives

Jul 16, 2012

My netbook that uses windows 7 starter cannot detect any of the flash drives and has display troubles cause everytime restart its display will be in windows classic. Should I take it to be repaired??

View 1 Replies


ADVERTISEMENT

IE9 Doesn't Recognize Flash

Nov 20, 2012

When I try to use something on Internet Explorer that requires Flash, it always says "Flash Version 9.0 or greater is required.." But I always keep my Flash updated. Right now, it's Flash Player 11.

View 5 Replies View Related

Motherboard Doesn't See Hard Drives After Flash

Jun 8, 2011

I got a new motherboard yesterday, installed it, and installed windows. This morning, I decided it would be a good idea to flash the UEFI (BIOS) to the newest version. Now, when I try to boot, it just sits with a gray cursor at the top left of the screen. I went into the UEFI and went to boot order, but it only shows my 1TB hard drive and my dvd drive. But I had a 750GB hard drive with windows installed. I think this is the reason it won't boot, because it doesn't see the drive with the OS installed.

View 9 Replies View Related

Windows 7 Laptop Sometimes Doesn't Recognize USB Devices?

Feb 3, 2011

I am running an HP Compaq 8510w with Windows 7 Enteprise. When I first got the laptop the USB ports didn't recognise devices when they were plugged in, and the laptop would just hang when shutting down (on the Windows Shutting Down screen), so I decided to reinstall the OS as there was a lot of unnecessary applications installed.

I've been using the laptop since the rebuild and all has been good, until the past week or so when the same two problems have materialised again - when I attach a PSP, or a printer via USB, they are not recognised. And when I shut the laptop down, it hangs on the Shutting Down screen.

What checks can I run to see what the cause of this might be? I've not really installed a load of software on here, and I can't think of anything specific that I may have done that would cause this...

View 3 Replies View Related

Laptop Doesn't Recognize Usb For Mouse

Jul 18, 2011

my laptop is saying tit doesn't any longer recognize the USB for my mouse,,does this mean the mouse is fried?

View 2 Replies View Related

Laptop Acer Aspire Doesn't Recognize External Hard Drive In Windows 7

Mar 28, 2011

my laptop acer aspire doesnt recognize my external hard drive in windows7. I will be great ful to them. it doesn't show any external hard drive but it shows pen drive and mobile usb cable but not external hard disk

View 1 Replies View Related

Toshiba Laptop Doesn't Read Pen Drives

Aug 5, 2012

I purchased a Toshiba Lap Top from a lady. She said that she had the system completely restored....she sure did. I have no internal sound and my pen drives will not work in any of the USB ports. What do I have to do to get them to work? I have all of my work on these pen drives.

View 1 Replies View Related

Windows 7 Setup Does Not Recognize Hard Drives

Dec 1, 2009

I have been trying to install a copy of an x86 version of Windows 7 Ultimate for weeks. For some reason when I first installed it It did not recognize my hard drives. I was ok with the upgrade at first (from Windows Vista Ultimate) but along with the disk space it is taking up from windows.old, I want a clean copy. When I go in the setup, click install, and go to the Custom Install tab, no hard drives or partitions show up. I have tried installing drivers from the Western Digital site, to no avail.The ultimate question I am trying to get answered is how do I get a my hard drives to show up on the setup and finally get to my destination of having one partition, with my copy of Windows 7 Ultimate on it? This is the information of the hard drives and where I tried to download the drivers to allow the installation to work: WD Support > Installation > SATA & SAS > WD Caviar SE / SE16 (SATA I)

I tried to load the drivers at the installation and apparently they were not the correct ones, although the most recent ones I could find were for WinXP.I am getting frustrated with Windows 7! I also have a problem where I am not sure If my video card is working properly or not, but that is another issue that I have posted on that the advice I received did not work..

View 9 Replies View Related

Why Doesnt Windows 7 Recognize Two Of Hard Drives

Sep 21, 2012

My motherboard is ASUS P6X58D Premium, Intel i7 920 2.67Htz, Windows 7 Pro 64bit, Hard drives: C: WD Caviar RE2WD500YS, WD1002FAEX 64mb cache, 3rd drive is 1TBWD1002FAEX 32mb cache, and 4th drive is: 1TB WD1001FALS-00J7B0 32mb cache.When I click on My Comuter in Windows 7, it does not see hard drives #3, and #4 but it does see the C: drive that is a 500GB WD drive and the first 1TB WD hard drive.Drives #3 and #4 are not seen by Windows. Western Digital Data LifeGuard Diagnostics(DLGDIAG) sees all four drives but the SMART status of drives #3 & #4 say: Not Available. I can run a Quick Test on drives #3 & #4 and they pass the Quick Test but it won't run the other WD tests for drives #3 & #4

View 2 Replies View Related

Windows 7 Doesn't Recognize All RAM

Mar 16, 2011

How do I get my Windows 7 to read both RAM 1 gig each. total of 2 it only recognizing 1 gig?

View 2 Replies View Related

Windows 7 Doesn't Recognize External HD?

Sep 14, 2011

I have been using my WD External Hard Drive in my new Windows 7 desktop. Everything was working fine until this morning, my external HD stopped responding. Everytime I connect external HD to my desktop, I get " You need to format the disk H: before you can use it".

I've tried changing the drive name as well but with no success.

View 1 Replies View Related

Windows 7 Doesn't Recognize Partitions?

Feb 3, 2011

Windows 7 doesn't recognize my D partition though windows XP used to recognize it just fine on my computer, and it also used to work fine on that HDD using that same version of windows 7 on my old computer. My computer is a Dell Optiplex 745 and my HDD is WD10EARS (No Jumpers is being used) Here is a Screen of the installation Process

View 2 Replies View Related

Windows Doesn't Recognize DVD Eject

Apr 19, 2010

When I insert a disk, the OS reads it correctly, and I can do whatever with it. However when I remove it, Windows still shows the disk is inserted, and inserting another disk causes any program that tries to access it to hang indefinitely (including individual windows explorer instances).

After several hours of google and trying various fixes (including removing the drivers for the dvd-drive and ATA Channel 0-5, disabling windows native burn capabilities, uninstalling CyberLink PowerDVD 8 and Nero Express 9, and everything in this thread), I've got it so that the drive recognizes a single removal of CD/DVD and insertion of a new CD/DVD, however the second time it still gets stuck.

I'm on an Alienware m17x with a TS-T633A DVDRW.

View 2 Replies View Related

Win XP PC Doesn't Recognize Windows 7 Bootable USB?

Jul 14, 2012

I am trying to upgrade my dad's Dell Inspiron 530S to WIn 7. I have chosen removable from the boot menu for the 1st 2nd and 3rd options, but the USB keeps getting passed over on start-up. I cannot see any menu functionality that lets me add USB. Right now removable is listed as floppy disk. He is on BIOS 1.0.13 (just upgraded to 1.0.18 same issue) running Win XP service Pack 3.

View 7 Replies View Related

Windows 7 Installation Doesn't Recognize HDD?

Jan 15, 2013

I'm trying to do a clean install of windows 7 (by booting the computer into the CD) but no drives show up. This usually happens to me so no big deal. The problem is.. recently I got a "new" computer, made out of old parts of other computers. SO i have no drivers CD.. So i have no SATA drivers...I tried to download about 30 so far with no luck. Simply because I have no idea what I should download.I simply don't know if sata drivers come from the HDD i have, from the motherboard, from the chip of the motherboard.. i have no clue.Here's my computer info you may need:I've seen posts saying to in the bios change from whatever I have to IDE or to something else, but I have no clue what that does so i would rather avoid it if possible. If there's no other solution, what does it actually do if i change from SATA to something else? (if its even SATA what I have).

View 9 Replies View Related

Windows 7 Doesn't Recognize Officejet K60?

Nov 24, 2010

I recently installed Windows 7 Ult. 64-bit on my new Asus G50vt-x5 laptop. I am unable to get my Officejet K60 to work with it, though every website I've gone to says that it should automatically show up when it's plugged in. The printer still works as a standalone copier, and it worked with my previous computer -- an Xp Pro system.

View 9 Replies View Related

Windows 7 Doesn't Recognize Usb 2.0 To Ide Cd/dvd/rw Drive?

Oct 5, 2011

have an acer veriton, trying to hook up an external cd/dvd drive.

View 4 Replies View Related

Windows 7 Doesn't Recognize WD HDD During Installation

Jan 4, 2012

Windows 7 doesn't recognize my WD HDD during installation?trouble shooting:This is what i did..... I took a laptop hdd and placed it into my desktop. I booted my desktop with the laptop hdd. I then placed the WD HDD ( the one that i've been having trouble with) as a second hard drive. I noticed that windows recognized the WD HDD and could write to it. I also reformatted the WD HDD. I then tried to run the windows installation from my laptop hdd so i could install it on my WD HDD and once again it didn't recognize it. I thought maybe i could clone my laptop HDD to my WD HDD with Acronis "clone software" and it couldn't recognize the WD HDD as well. This is frustrating...... Why can i write to the WD HDD but cant install the OS.

View 2 Replies View Related

Windows 7 Setup Doesn't Recognize SDD

Mar 24, 2012

I have an OCZ SSD in my system. It works fine, I have tested on it other systems, and I am able to install Windows XP and Ubuntu on it. When I put in a Windows 7 disk it does not show my SSD. I have 2 different disks and both have the same problem. One is an old disk without SP1, one is a new one with SP1. I have tried different SATA wires and different SATA ports all tested and working on both other systems, and the same system under a different OS. Running in either AHCI or RAID doesn't let my system start from disk. When I click Custom and get the the screen where I partition my drive it does not show anything. It is completely blank. Despite the fact that my drive works under every other circumstance I can create.

View 4 Replies View Related

Windows 7 DLNA Doesn't Recognize MP4 Files?

Feb 3, 2013

I have an external USB drive attached to a Windows 7 Ultimate box. The USB drive has video files that I stream to my Samsung TV using DLNThe setup works except last night when I copied over .MP4 files to the USB drive. For this file extension, the files did not show as playable over DLNA. Is there a way to enable the setup to recognize this file extension?

View 1 Replies View Related

Windows 7 Doesn't Recognize Umax Scanner

Apr 20, 2011

I have a umax powerlook 1000 with large transparency adaptor. It previously worked on my win 2000 system but i had to upgrade to win7. I tried changing the compatibility tab to win 2000 and loaded the magaiscan 4.7 which runs but the computer simply can't find the scanner.

View 2 Replies View Related

Dvd Rw Doesn't Recognize All Disks Since Update To Windows 7?

Dec 22, 2012

looking for dvd rw driver for my dell optiplex 330;hl-dt-st dvd=_rw gsa-h73n ata device. not reading all cd/dvds since upgrade to windows 7

View 1 Replies View Related

Computer Doesn't Recognize Windows 7 Disc

Feb 2, 2013

I have a Windows 7 Disc that I've used in the past, but I'm planning on building a new rig in about a month or two and I'm just planning a little bit. So my problem is that my computer doesn't seem to recognize my CD during the boot. It use to ask me press a button to boot from CD but no longer does and but I can run the CD after my computer has booted to my desktop so that means It can't be the CD nor the CD drive correct? I do have the boot order set for the CD-ROM first.

View 13 Replies View Related

Windows 7 And Flash Drives

Jul 21, 2011

I've got three different (but identical, to look at them) MicroSDHC thumb drives. When I tried them in my new Win 7 PC, it assigned a different drive letter and description to each, under Devices with Removable Storage. Even though "Hide empty drives in the computer folder" is checked in my Folder Options, it's not working -- they're still listed under Computer, grayed out. Worse, when I fire up Windows Explorer, it occasionally (but not consistently) gives me a series of errors about the drives not being available -- and this continues to happen even after I uninstall them in Device Manager.

View 5 Replies View Related

Windows 7 Installation Doesn't Recognize Hard Drive

Oct 1, 2010

My mother asked me to fix her computer, his window XP is badly corrupted, so I tried to install Window 7 on her computer. However, the hard drive didn't show on the screen. I found it quite odd because BIOS detected it as IDE driver, and it's a SATA driver. I tried to install with old Window XP installation CD. Same thing, doesn't show on the window XP installation screen either.

I tried to hook hard drive on other computer, and was testing with Window 7 XD and see if it was working, and it did. It shown on the disk screen. My guess that it's probably the BIOS that occurred, or perhaps other things. I have one hard drive, nothing more.

View 9 Replies View Related

Windows 7 Doesn't Recognize NVIDIA Graphics Card?

Jan 30, 2011

I have been looking for a Windows 7 driver for a NVIDIA Geforce Go 6800for an Alienware Area-51 M7700 laptop. Every driver that I download from NVIDIA's website gives me the error message during the installation that it cannot find a
driver compatible with my hardware. Windows 7 has installed a generic "standard VGA adapter" which does not allow for aero functionality

View 9 Replies View Related

Windows 7 Doesn't Recognize The Information On 2nd Hard Drive

Aug 14, 2012

I have my WD75 Caviar Black 750G from my old computer it has all my files on it and it will not let me plug it in and look through it probably because the original computer was Win XP. Is there anyway to get the information off of the harddrive?

View 2 Replies View Related

Windows 7 Cannot Read Usb Flash Drives

Dec 9, 2011

I have a problem with my PC. It is simply can't read lot of USB drive. I need to restart in order to be able to read it. Sometimes it is working or else it is still fail to read.I don't know what is the problem but I get this Inaccessible Function error. And when I checked at Disk Management, the file format of the USB flash drive shown as RAW.I have Ubuntu on my PC (dual boot). And it is just working. Therefore for some reason, my Windows 7 is stupid enough to detect my USB file system.

View 4 Replies View Related

Command Prompt Doesn't Recognize Commands / Can't Repair Windows

Jan 31, 2012

i cant run any commands in command prompt.i have checked a lot of stuff on inet to solve like paths @environment variables etc but i still couldnt solve it.i thought maybe its cuz a system file is missing made a repair disc but couldnt run sfc via command prompt at boot because i got this error saying "thıs verıson of system recovery ıs not compatible with the version of windows you are trying to repair"

View 9 Replies View Related

Windows 7 Doesn't Recognize Video Card Ati Radeon 5650 HD

Mar 13, 2012

Windows Doesnt recognize my video card Ati radeon 5650 HD, it just says stantard video card for windows, neither my monitor its recognice....

I installed the driver many times , My pc is SONY VAIO Vpcef2s1e , i even downloaded the driver from sony site and still doesnt work...

My windwos is URALSOFT WINDOWS 7 ULTIMATE x64

View 2 Replies View Related

Windows Explorer Doesn't Recognize Added Hard Drive

Aug 1, 2012

I recently attempted to add a hard drive to my Lenovo W520 laptop using a CD/DVD caddy accessory designed to hold a SATA hard drive.Windows recognized the new device and according to its messages, automatically installed the required device drivers. However, when I go into Windows Explorer, the new drive is nowhere to be found.Now, I know (or at least assume) this new drive probably needs to be formatted, but shouldn't it show up within Windows Explorer even in a pre-formatted state?

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved