Motherboard Doesn't See Hard Drives After Flash
Jun 8, 2011
I got a new motherboard yesterday, installed it, and installed windows. This morning, I decided it would be a good idea to flash the UEFI (BIOS) to the newest version. Now, when I try to boot, it just sits with a gray cursor at the top left of the screen. I went into the UEFI and went to boot order, but it only shows my 1TB hard drive and my dvd drive. But I had a 750GB hard drive with windows installed. I think this is the reason it won't boot, because it doesn't see the drive with the OS installed.
View 9 Replies
ADVERTISEMENT
Jul 21, 2009
The new MB will not recognize the old hard drives. My previous MB (socket 775) failed so I installed a new LGA1155 MB and a new Intel processor. I also installed my two SATA drives. One HD has the Windows 7 OS plus all the programs. The other HD has all the user data. When I try to start the new rig, it tries to reinstall Windows.
View 9 Replies
View Related
Jul 16, 2012
My netbook that uses windows 7 starter cannot detect any of the flash drives and has display troubles cause everytime restart its display will be in windows classic. Should I take it to be repaired??
View 1 Replies
View Related
Jun 1, 2011
I am installing windows 7. but the installation cd won't recognized the hard drives but my bios does. i went to the website and looked up drivers for the wd2500s but they don't have them. they said that they use the software in windows to work. so is there any way to get the drives to work? i have three set up on raid 0
View 5 Replies
View Related
Nov 13, 2012
I recently noticed an issue when trying to connect to external hard drives. Initially noted that it wasn't showing in 'my computer' and so assumed I had driver issues and sought to update them from Dell's site. After doing so there was still no change, but noted that It was appearing in 'device manager'.I even tried updating the USB hubs from the Device Manager, and it states that they are all up-to-date with the correct drivers. Both external hard drives that i have tried has worked on other PC's so i assume that mine is the issue.
View 1 Replies
View Related
Jun 20, 2012
the problem being is the motherboard will not recognize the graphics card with the latest drives and older ones to test, the strange thing is if i take a stick of memory out it boots up in single memory mode and recognises the card straight away, likewise if i install another module to make it 6gb it fires up perfectly and plays CODMW3 no problem but if i am doing office work after about 30minutes the screen starts to flicker and black lines appear through writing then finally the BSOD comes up complaining about one of the graphics card drivers, dont get me wrong i have played COD for ages and not had a problem, i am at a bit of a loss i want 6gb memory ideally but the system becomes unstable, the system works great as an office computer with 4gb of memory but wont play videos or do video editing because it doesnt recognize the card.
View 10 Replies
View Related
May 8, 2012
in 7 doesn't see any USB flash drives. Check in disk management - not showing up there either.AND........If I switch HDDs & revert to XP - same thing. No usb flash drives appear. And in control panel > disk management they do not appear as unassigned also.
View 1 Replies
View Related
Jul 8, 2012
So I basically want a new motherboard and CPU. I've settled pretty much on this CPU:
Amazon.com: Intel Core i7 2600K Processor 3.4 Ghz 4 Core LGA 1155 - BX80623I72600K: Electronics
But that expense starts to limit me with regards to motherboard. I essentially want the best possible stuff I can get but I would never dare overclock my stuff.I've looked at the ASUS Maximus IV Gene-Z as supposedly being the best motherboard out there... for overclockers.It being so highly rated all around draws me to it, but also hear very great things about various other ASUS types, like ASUS p8Z68 which are basically just as good as the Maximus IV Gene-Z, but without overclocking or some additional features I won't use.
So being that I basically want a computer twice as fast as my ass, what would be a good personalized recommendation for me with regards to motherboards?
View 9 Replies
View Related
Jul 21, 2011
I've got three different (but identical, to look at them) MicroSDHC thumb drives. When I tried them in my new Win 7 PC, it assigned a different drive letter and description to each, under Devices with Removable Storage. Even though "Hide empty drives in the computer folder" is checked in my Folder Options, it's not working -- they're still listed under Computer, grayed out. Worse, when I fire up Windows Explorer, it occasionally (but not consistently) gives me a series of errors about the drives not being available -- and this continues to happen even after I uninstall them in Device Manager.
View 5 Replies
View Related
Jan 16, 2012
2 of my usb flash drives are not recognised while 2 are, and I have just been given a new one.When I plugged it in the computer said it was loading drivers and then that it was ready for use.It shows up in device manager but I cannot access it from 'my computer'.The same applies to 2 of my 4 drives.
View 1 Replies
View Related
Aug 6, 2012
When I put the flash drive into any of the USB drive on the computer I get a message come up firstly asking me to format the flash drive. I even get this message come up when I plug my TomTom satnav in via USB.If I click on the drive designation I get the following message: {{ K:drive is not accessible. The volume does not contain a recognized file system. Make sure that all required file system drives are loaded and that the volume is not corrupted.}} I know that the memory sticks are OK as I have tried several and also tried all the USB slots on the computer and in another computer. I cannot remember having done anything to have caused the problem since last using the USP drives.
View 3 Replies
View Related
Feb 21, 2009
It is difficult to remove multiple flash drives using the safely remove hardware dialog. I had three flash drives plugged into a USB hub, and I wanted to remove all three at once. I click on the remove hardware icon in the notification area, but it only allows me to select one drive at a time.
When I click on a drive to remove, the dialog disappears and another window opens to let me know that the drive can be removed.
I have to repeat this process for the other two drives. Worse still, the remove hardware icon changes position when the safe to remove dialog appears.
Ideally, when multiple removable devices are installed, the remove hardware dialog should remain visible after selecting a device to remove. That would allow the user to select additional devices to remove if so desired.
View 5 Replies
View Related
Oct 8, 2011
make a dualboot comp by adding windows XP to a new partition. I created the new partition with 20gb. (From the 500 of my actual harddrive)But before I actually installed on that, I got distracted with a second harddrive that my dad got(for no reason). It had a full copy of Windows XP backed up on it from another computer, so I figured I would just use that for the dualboot. I plugged it in (wired the same way as my old harddrive, but different data slot), restarted, checked the harddrive in explorer - all the data was there / reading correctly / etc, and I used 'easyBCD' to add the new harddrive to the boot list.(Which, of course, crashes if I try to start it. I just wanted to see what it would do). For a reason I can't remember, I unplugged the second harddrive for a bit, started the computer on accident (I don't know if anything loaded before I shut it off), and then when I plugged it back in.Windows 7 would not launch. It goes to a DOS-like window, except it's just a flashing _ and it never does anything even after a few minutes. XP didn't work still.. so I decided to reinstall XP (as I couldn't tell which harddrive was which on the list, I unplugged the main harddrive while installing onto the new).. and when I did this.. it formatted and installed fully... then restarted.. then restarted.. and restarted.. and just kept restarting, never showing any thing past the manufacturer logo/BIOS load-button-message-thing. So, I then try to use my 3-disk Windows7Recovery disk(burned myself with a program apparently included by the manufacturer.) It installed fully, appearing to work.. but when I launched it, it said "Invalid Partition Table" and wouldn't boot past that. When I insert my driver installer disk, it gives me a basic DOS window thing. dir A: shows the files in the disk. dir B: for some reason shows the same. C: says "Error reading from drive C: DOS area: general failure". All other letter:'s just say "invalid drive". (I'm doing this with both harddrives in.) I attempted connecting the harddrives to an old computer, but it gave an error for both. (It detected the harddrives, but said it had an error reading from it. Windows Explorer asked me to format it... {i'm willing to format one of the drives if anybody thinks it will help, but the old harddrive has data I'd prefer not to lose.} ) Looking on google, I saw several problems that all have similar problems (less overdescripptive than I am though) but none of the fixes suggested worked for me. Also - as I have two different with different errors, I only need to make one of them work.)Also - my other available computer has a CD burner / floppy drive if either are required. I also have several USB's. The computer can boot from USB's and CD's (tested), and I could easily take the floppy thingy and connect it to the computer.also - this computer is probably still under warranty unless unscrewing the hard drive voids it. .. does that count as modification of the computer?
View 5 Replies
View Related
Feb 26, 2012
I have win 7 home premium on one tower and win 7 pro. on another. My question is can I save a system iso of each one on usb flash drives in case of a crash? My home premium c:/ drive shows 445gb. free from 465gb. so would I have to use at least a 20gb. flash drive. I know New Egg has a large selection of flash drives. I have a second hd in my pro system I used to save a complete iso backup on it.
View 2 Replies
View Related
Mar 16, 2012
I install a flash drive, opens automatically, when I close programs and click remove I get a window item is still in use. Close all programs and click safe to remove. I am not real literate on computers but I don't know where to go to even find if there is anything left open in the flash drive. I keep going back ti remove safely and same window comes back.. How big a risk if I just remove it?
View 3 Replies
View Related
Dec 9, 2011
I have a problem with my PC. It is simply can't read lot of USB drive. I need to restart in order to be able to read it. Sometimes it is working or else it is still fail to read.I don't know what is the problem but I get this Inaccessible Function error. And when I checked at Disk Management, the file format of the USB flash drive shown as RAW.I have Ubuntu on my PC (dual boot). And it is just working. Therefore for some reason, my Windows 7 is stupid enough to detect my USB file system.
View 4 Replies
View Related
Jan 6, 2010
I have tried multiple fixes and still cannot connect any flash drive or external drive to any usb port on my computer without the dreaded "Usb not recognized" error. My mouse and keyboard are both usb and have worked fine though. I have unplugged the power cord from my psu for a few minutes. I have booted into safe mode. I have deleted the infcache.1 file. I have check my Bios settings (and have latest bios update). I have completely removed all the usb devices in device manager and rebooted which reinstalled everything. I have booted the computer up with a flash drive already in a usb port. I have gone into Drive Manager to see if anything is recognized without a drive letter. I have even applied the hotfix from here - [URL]. Nothing seems to work, yet all of these devices work fine on my netbook running Windows XP.
When I originally installed Windows 7 everything was working fine. I would say it roughly stopped working a month or two ago. I don't constantly use flash drives or my externals so I could be a little off on the time frame (why I didn't do a system restore). I first noticed the problem when I plugged in my Tmobile G1 phone to transfer files and it wasn't recognized. My phone would still charge off of the usb port, but I couldn't mount and browse the 4 gig sd card in my phone. It was working before because I have files on my phone that I transferred from my computer after the Windows 7 install. I started testing out my known, working flash drives as well as my usb powered 2.5" external drive and they too come up unrecognized on all usb ports (front and back).
My specs:
AMD X2 5000+ BE
Gigabyte GA-M55plus-S3G mobo
G.Skill PI Black 4GB ram (2x2 - DDR2 800)
2 Western Digital Sata drives
Nvidia 9800 GTX+ video card
450 Watt PSU (don't remember brand right now, but good amp rating on 12v for video card).
Windows 7 Ultimate x64
The only drivers I am using for the system that are not the default Windows 7 drivers are for my video card and onboard audio. Onboard audio is the only Windows 7 driver provided on the Gigabyte website for my motherboard. What shoild I do, check or double check or should I start considering formatting and a reinstall of Windows 7 (which I have been trying to avoid)?
View 4 Replies
View Related
May 25, 2012
I've got new computer with Windows 7 & for some reason or other cannot access two Sandisk flash drives (Cruzer Blades) yet no problems with other makes!
View 3 Replies
View Related
Nov 6, 2012
I have recently downloaded Windows xp .But I am having problem with sound.The disk is unsupported.
View 2 Replies
View Related
Apr 20, 2009
I have a couple of flash drives I have formatted to NTFS. One for an install drive and one for a readyboost test. If I formatted the drive in CMD do I have to format it the other way (to FAT32) in CMD or can I just right click the flash drive and format it there?
View 3 Replies
View Related
May 28, 2012
I have just recently acquired a flash-drive and have been curious as to how to encrypt some files on it. The key word being some.It's a large drive (8GB), and will be used for many different things. I want an area on the drive to be used to transport/hold personal documents which I wish to have encrypted.I have tried software like TrueCrypt which decided to use the whole drive, and didn't seem to work properly anyway (?)I want something that acts like a 'safe', I double click it, I enter a password, I access the files.I need the software to run strictly from the stick, without the need for Admin' Privileges and for it to work on most operating systems (2000 and newer)... I understand I could use old fashioned password protected/encrypted .zip's.... but I don't know if Windows can natively read these without the need of say 7zip or WinZip.
View 1 Replies
View Related
Mar 31, 2012
When attaching a flash drive:
1. The autoplay pop up doesn't appear;
2. The device does light up initially;
3. The device doesn't show up in "Computer"
4. The device doesn't show up in Disk Management - just Disk 0 (system reserved, C: and I and 0 (CD ROM)
5. The device appears in Device Manager under USB controllers as a storage device but I can't access it.
6. This happens with all memory sticks and occasionally with ipod etc.. but sometimes for no apparent reason they work! All devices works ok with other computers.
7. 9 times out of 10 plugging in a device or turning on the USB attached printer will cause the computer to BSOD, usually with IRQL NOT LESS OR EQUAL 0X0000000A
8. Devices are never allocated a drive letter.
The only thing I can think of is that I repartitioned the external hard drive (which I attach to back up) which may have confused the computer with driver numbers? Possibly?! And I did fiddle with the System Reserved drive as I had back up issues and one of the solutions was to rename it, then I renamed it back again (I think).I'm running Windows 7 Home 64-bit, Avira anti virus and the computer is about 6 months old, working ok until a month ago. Can't think that we downloaded anything about the same time as the problem started but possible. I've tried to update all drivers that I can think of but the only one that needed doing was the Nvidia GeForce 7025 which was outdated.
View 8 Replies
View Related
Nov 20, 2012
When I try to use something on Internet Explorer that requires Flash, it always says "Flash Version 9.0 or greater is required.." But I always keep my Flash updated. Right now, it's Flash Player 11.
View 5 Replies
View Related
Jan 9, 2013
Had to rebuild my DAW after my old mother board ate it. Got a new mobo and ram and put it together today. Installed Windows 7 Ultimate 64 bit. In My Computer, Windows only sees 2 of my drives. The 3rd drive with my projects on it isn't there. It shows up in the BIOS and the System Management Storage app as healthy and active
View 2 Replies
View Related
Apr 11, 2009
This is sort of an extension of a previous problem, which I never found a solution for. Thread: Accessing drives in Windows Explorer takes a long time
Basically, I sometimes can't access other drives/partitions on my computer. If I look at my drives in Windows Explorer, I can see them all listed. If I double-click on the drive, the progress bar at the top of the window moves along very slowly, but the drive never actually opens.
Sometimes I can access a folder on the problem drive by running e:stuff, while other times it will just open an empty Windows Explorer window. Sometimes I can access a folder, but if I try to access the same folder a few minutes later, I run into the same problem again.
Indexing is turned off for all but a few folders (library folders).
Any ideas?
View 7 Replies
View Related
Feb 4, 2012
My USB flash drive doesnt work anymore?
View 3 Replies
View Related
Mar 24, 2011
All of my Removable Storage Devices (Flash drives, External HDD) do not work with my Windows 7. When I connect them, I hear the beeps but the device sometimes show up, sometimes not and sometimes they appear after a long interval. On accessing them, Windows tell me that I need to format the drive. Well, I can't do that. It's happening with all of my removable devices, not just one. They work fine with my laptop which is Windows 7 too,
View 1 Replies
View Related
Mar 11, 2012
Windows 7 HP has suddenly started to create headers for the alphabetical groups it has started to organize the contents of my flash drives into. Here is an example: The headers were not there last week, they have not been there since the system was built a year ago, they are not on the drives themselves and they do not appear when the flash drives are plugged into my XP system. I have made no changes that would account for the appearance of these headers during the past week or so.
View 2 Replies
View Related
Aug 15, 2011
My laptop is not letting me copy anything onto USB flash drives. I'm using windows 7. I have already tried system restore and uninstalling the drive in Device Manager and Disabling write protection in the registry but to no avail. I am able to format the pen drive and also access files on it and copy files from it. But I am not able to paste files from my laptop onto the pen drive. It says "Destination folder access denied" and "You need permission to perform this action". I am running an administrator account. Also I am able to do everything normally in the case of a external HDD but again face the problem when trying to paste something to SD cards. I have taken ownership, run as administrator and also tried to drag-drop but to no avail. This not for just 1 particular file/folder. I am not able to copy anything to the USB and at the same time I am able to copy anything to the external HDD.
View 4 Replies
View Related
Sep 1, 2011
My Adobe Flash Player doesn't work, everytime I go to a video on the internet, a box with a circle, triangle and square comes up in the corner, when I install it and open IE, my dad's favourites and stuff shows up, but when I close it and open it again, it goes back to mine and IE doesn't work again,
View 1 Replies
View Related
Feb 23, 2013
I just installed Windows 7 Ultimate 64 bit OS. The BIOS sees both hard drives and the CD and DVD drive and the Windows Device Manager shows the extra hard drive and both optical drives. When I click the folder in the task bar (Libraries) I can only see "C" drive and no optical drives either. When I click on the CD drive I get the right menues for it, but it does not work at all. If I put a CD in the drive it locks up the system and I have to power off the computer before I can eject it.
System Info:
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Ultimate, Service Pack 1, 64 bit
[Code].....
View 6 Replies
View Related