Computer Does Not Recognize WD1200B015-RNN External Drive When Plug It Into The Usb Port
Jun 25, 2012
My computer does not recognize my WD1200B015-RNN external drive when I plug it in to the usb port. I now have windows 7. It previously worked on Vista?
I have a Router with ethernet and usb ports on it, and want to use the usb port to plug an external hard drive into it. Is this possible or is the usb port only for connecting to a PC.
I'm having some trouble getting an external hard drive to be recognized by my computer. I have quite a few already, but I got another one because one of them won't read on my comp, although it will read on my netbook. The new drive I got has the same issue, no go on the comp, but works fine on the netbook.
I tried unplugging all of the other drives and even using the other cables to connect the new drive, but Windows 7 simply won't recognize it being plugged in. No "badump" sound and no icon in My Computer. Tried restarting, nothing. I tried it in all six of my computer's USB ports, but got no better result.
I have just re-built my windows 7 machine after a harddisk failure. All seems to be working fine except for my external USB drive which locks up explorer and windows in general, only way out is the magic reset (even Task manager locks up).
I recently purchased the Phillips Universal USB from Amazon for my mp3 player; my previous one broke and now I have no way of hooking it up to my computer and putting new music on my mp3. The problem is when I plug in the usb the computer does NOTHING, nothing pops up. Nada. When I plug in other usbs they seem to work fine so I'm not sure what the problem is. What can I do to fix this?
My 1.5TB USB( using the EZ-dock adapter) drive is about full, and I'm looking at a 3GB drive to replace it. My system is a Netbook with USB 2.0 as the only external drive interface so that limits my options considerably if I want to keep it to something I can throw into my suitcase easily when travelling.
I've been all over the net trying to resolve this issue, and found many hotfixes,downloads from Microsoft and manufacturer, but to no avail. My external drive was recognized for the first month. Then, very suddenly, Windows 7 doesn't recognize it. It sees it, but prompts a "Need to Format before first use". It has 300G already used with valuable info.Tried moving the external hard drive to our home PC with Windows XP and the same "Need to Format" message is prompted. If I hook it up on my wife's MAC, I can see the data. Now I have read that this is a known issue with the 64bit version of Windows and external drive. I have already all the KB976972 and KB977074 download fixes from Microsoft. I have also tried to uninstall the drive, unplug it, turn it off, restarting Windows, and plugging back the drive, but I have the formatting prompt again. And if I choose to not format, i have an error message DATA ERROR (CYCLIC REDUNDANCY CHECK).**This does not seem to be an issue regarding only the WD drives but all drives**Called WD tech, and it was useless. Does anyone have a fix? A link to share? An idea? I'm running Windows 7 Ultimate 64bit on my HP Pavilion a6418f.
For some reason my HP Laptop (Win 7 Home Premium) can't see/recognize my usb external hard drive (seagate). When I start/restart my computer and connected the usb cable into laptop, it shows the icon on bottom taskbar (safely remove hardware and when clicked on the usb icon, I see "open Devices & Printers and Eject USB to IDE bridge), but I can't see my drive at all when I click on "my computer"? I can only see it under "right click Computer, Manage, Device Manger, Disk Drives," it only says; "generic USB Disk USB Device". And when I expanded the USB controllers via Device Manager, I can see it under USB Mass Storage Device. Sadly, I can't do much there/here unless Win 7 can see/recognize the drive under "My Computer".<> HD is 40GB IDE Seagate (enclosure is PowerSpec 3.5 IDE to USB 2.0)<> Drive is only storage for data, documents, pictures and softwares/programs, etc.<> Drive is/was not formattedAgain, this drive was never formatted, only for storage purpose (i.e. pictures, documents, data, etc.). I can see it on my old computer when connected internal via IDE cable.
I am a MAC user but for a project I have to upload something on a PC...the external hard drive is recognized by the computer but I cant see the files on it...it is fine when I hook it up to the Mac..
I'm using the release candidate and whenever I plug in my Western Digital Passport USB external hard drive, I get nothing. It doesn't show up in device manager or in My Computer. The light on the harddrive comes on and the drive spins up, so I know it's working. Windows just won't recognize it.
I was running windows seven and my HD started failing so I bought a new one and had it shipped in. After recieving it today I backed up my old HD on to a My Passport I had lying around created my repair disk and set out to restore my new blank HD. When I got to the startup and repair menu I clicked restore from image and my computer scanned and could not find an image to restore from. The external is plugged in and I can see the backup files when it gives me the option to look for drivers but it wont recognize the external to let me load the files from it.
I use an WD external hard drive (1TB) for additional storage and it was working fine with no issues. The small USB connector broke off the board yesterday and I purchased a new enclosure and installed it. Now my computer does not recognize it as a storage device. I have all the data still on the HD and really do not want to loose it. I tried adding a letter for the drive, but it does not show up to change the letter of the drive.
.I didn't wait for the computer to tell me it was ok to remove the drive in the usb port. Now my computer no longer recognizes the external drive After removing my external hard drive (without the ok) my computer no longer recognizes the external hard drive. What do I do.
my laptop acer aspire doesnt recognize my external hard drive in windows7. I will be great ful to them. it doesn't show any external hard drive but it shows pen drive and mobile usb cable but not external hard disk
I reinstalled Windows 7 initializing all the hard drives to fix the constant crashes, and it seems to have worked. The bad news is that the computer does not seem to recognize one of my CD drive. By that I mean, if you click on computer it will show one of my CD drives under devices and removable storage, but not the other CD drive.
If I put a CD in, the drive will spin up but nothing happens. I tried to reinstall the drivers for the one CD drive but that was no help. How do I get the computer to see this other CD drive?
I'm running Window 7. Should I re-install Windows 7 again?
My computer will not recognize my CD ROM drive (the D drive). For example: when I put a disc into the CD drive, the mouse pointer briefly changes to a CD icon (as it normally does) to tell me -- presumably -- that the drive is scanning the disc for its Table Of Contents. However, the CD icon only appears for a split second (when normally it would take a few seconds to read the contents). When I double-click on the D drive to run the CD, it prompts me to 'Please insert disc into Drive D', when in fact there is already a disc in the drive. Can you tell me why this might be happening?
computer will not recognize windows 7 on my usb hard drive when I try to boot from it. I go into bios and select usb hard drive but it goes on with its normal routine. Need to reinstall windows on a computer that I am locked out of.
Recently took out my laptop HDD and formatted it, NTFS format, and stored stuff on it. Now when I place that in an enclosure and want to use it as an external HDD drive, it doesn't pick up the device. Through Diskpart I am able to give the drive a letter and access it, but when I "Safely" remove device, the Drive letters remain....
- Do I need to do anything special to make the Device a Plug and Play? - How do I remove the Drive Letters that I assigned through Diskpart from "My Computer"?
System configured as RAID 1 (mirror) and works well until this day. From today DVD/RW Drive Shows Up As Hard Drive! Under conmputer mannagment all drives shows correctly. I tried everything - unninstall, tried diferent DVD/RW drive, tried assign a new letter etc
I just got a new laptop with Win 7. The computer sees the Iomega external drive, and tells me how big it is, how much space I have on it, but won't let me see the files.
I got a problem, my external hard drive (westen digital 1.0TB) isn't popping up my computer. I can see it in devices (USB to ATA/ATAPI bridge) but i can't acces it.What i've done already:Computer Management-> Disk Management. Than ive to initialize the disk, i can choose between MBR and GPT. In both cases i got the error: Data error (cyclic redundancy check). I can't chance any letter Downloaded different programs but non of them worked
I have attached a Seagate 500 GG external hard drive to my computer but it is not showing up in My Computer.I have browsed similar threads and on their advice gone into Device Manager.The drive is there but with no letter assigned to it but when I right click to assign one, it refers me to Windows Help, which is unable to solve the problem. There are actually two extra ikons in Device Manager - one marked FAT Healthy (EISA Configuration) and the other just marked (GPT Protective Partition).The device is acknowledged as working properly in Device Manager.The files on this drive were created on a Mac, which may be the source of the problem? Most of them I will therefore not be able to read, but there is one which is a .mov file which I should be able to read and hopefully copy - if I can access it.Is there any way I can access the drive via my PC (Windows XP) or will the drive have been formatted for Mac only and therefore is inaccessible via PC?
I am trying to transfer files on my external hard drive (Toshiba Canvio - Windows XP) to my new computer (Windows 7), but when I click on the file located on the external hard drive, I get the following messsage: "please select a valid job". How can I transfer all of the old files on my external drive to my new computer?
Some of my external drive find on the PC... Windows 7 and other external drives don't.. Those shows up in the printer and devices.. How do I get them to work as a letter drive in my computer....I have bought 2 floppy drives and don't work either... everything works on my laptop.... Just so much trouble to hook everything up..