External Drive Wont Show In Computer
Mar 7, 2012i bought a new external and it installs on my laptop and is in device manager but does not want to show in my computer.
View 2 Repliesi bought a new external and it installs on my laptop and is in device manager but does not want to show in my computer.
View 2 RepliesNew external HDD won't show in "Computer". I Have searched a lot, but only find comments directing me to Disk management and Device manager. The Ext. HD is not showing there either. Power light is on. This is a Lacie 2 TB Minimus USB 3.0 External Hard Drive [URL] No "Doorbell" sound when I plug in or un plug the USB connector. The LaC i.e., troubleshooting page tells me to go to device manager, but like l said, it's not showing there either.
Plus, it seems to have knocked out several of my USB ports, and I had the warning flag next to several of them in device manager ,but I was able to get them back by right clicking on each line one at a time, Un installing, and right clicking on the heading for the group, and selected "scan for hardware change". Then in the tray, I saw Driver was installed, or device is ready, something like that. All the ports seem to be working now, and the yellow flags are gone.
I did then try the External drive again, but it is still not working. I also installed desktop manager, but it's telling me to plug in my external drive, and then to re start my device. And if I start Desktop Manager it says, "No LaCie Desktop compliant device found." So I have another computer that shares this monitor,so I shut this one down, and hooked up my usb keyboard and mouse to the other older desktop system running XP, and the older computer does recognize this external hard drive.
It is in My computer on the older XP system/computer. So I shut that one down and started this one, and it does not show up on this computer, but then I noticed my keyboard would not work. Had to switch the keyboard USB ports to the other front USB port. And I had the yellow flags back in device manager again. Had to un-install again and let the system re install (selecting "scan for hardware change). Windows 7 Home premium, 64 Bit, Compaq Desktop, model 2010.
My External USB Hard Drive doesn't show up in My Computer Win 7 64bit.
I've just received my Western Element 2,5Tb today. When I first plugged it in, it worked normally. But due to my over-excitement, I copied too much files at the same time and it wasn't working anymore. I regretted doing this immediately.
I have searched on the internet to find some solutions but all of them didn't work. I've checked the Computer Management, Disk Management, but nothing about my External HD showed up. In the notification area, my laptop still detected it and I can removed it properly [even though i can't use it at all].
I tried to connect to my USB and another Samsung 500Gb HDD. And it worked perfectly fine. Then, I tried to connect my new HDD to my sister's lap [she is using Window Vista] and it worked perfectly fine too.
How do I get my external drives to show up in my computer as a letter and not in the printer and devices.... Some of my external drives works fine. Everything was working fine 3 months ago. Everything works fine on my laptop...
View 1 Replies View Relatedok i have a western digital my passport external hard drive. its Mosley contains games and all of my music and a video. ive haven't even had it for a year and it is not showing up on my pc. i did what other forms that i looked at "going through the computer management and changing the later it doesn't work". but when i did it, it took like ten minutes to load up usually when it is in sleep mode. plus when it is loading i went into my pc and the window is not responding i tried to end it. so i unplugged the usb and everything worked again. it works on other pc's but mine. some of my friends said it could be a virus or a Trojan. i dont know what to do to fix this im thinking of getting a new hard drive but i want to make sure i can fix this before i spend $60-$70 on a new one.
View 6 Replies View RelatedMy sent to only show dvd drive and external drive, I cannot send files to documents or folders.
View 1 Replies View Related.I didn't wait for the computer to tell me it was ok to remove the drive in the usb port. Now my computer no longer recognizes the external drive After removing my external hard drive (without the ok) my computer no longer recognizes the external hard drive. What do I do.
View 1 Replies View RelatedI have a Seagate External Hard drive, Desk Goflex 3 TB.I'm using it for sevral mounth in windows 7 and it's working fine.Now, I bought a new latop using windows 7 as well, and it's not recognizing my hard drive.The hard drive doesn't appear in the Disk Management at all.The computer does recognize other USB devices (disk-on-keys, mouse).
View 1 Replies View RelatedI recently noticed an issue when trying to connect to external hard drives. Initially noted that it wasn't showing in 'my computer' and so assumed I had driver issues and sought to update them from Dell's site. After doing so there was still no change, but noted that It was appearing in 'device manager'.I even tried updating the USB hubs from the Device Manager, and it states that they are all up-to-date with the correct drivers. Both external hard drives that i have tried has worked on other PC's so i assume that mine is the issue.
View 1 Replies View Relatedi bought a trix hard drive enclosure/case for my 2.5 250GB hard drive. I connected everything up and inserted the hard drive usb into my laptop but windows will not show the drive in my computer. It does make the beeping noise telling me its detected the drive and it also shows in device management.The strange thing is i tried installing linux on it and it did, but the computer will not boot into it from the enclosure, but does from the hard drive. Ive also tried it on 2 computers and both will not assign the drive and give it a drive letter.
View 2 Replies View RelatedHow to Show Windows 7 Computer Drive Letters Before or After Drive Name ?
View 0 Replies View RelatedI reimaged my computer because I was having a whole bunch of trubble with it (no of which really matter now). After reimaging I tried to access some of the files I saved on my external hard drive, but no matter what I tried I could not get access to the files.The drive appears in device Manager and in the USB Device pages, and I have tried uninstalling and reinstalling the drive. But for some reason I just can't access the device.
View 3 Replies View RelatedI have an issue where my flash drive periodically won't show up in My Computer... when I insert it, I hear the 'hardware insert' sound but no drive in my computer and no autostart. it doesn't show in device manager and clicking 'refresh' does not make it show up! if I remove the flash drive, the drive appears in 'my computer' for a second then disappears... the same problem occurs when I plug it into another port... I have four ports, only three of them are not used by something plugged in permanently... usually I have to insert the flash drive into random ports at least 5 times before it displays the drive...
View 6 Replies View RelatedNew external HDD won't show in "Computer" l Have searched a lot, but only find comments directing me to Disk management and Device manager. The Ext. HD is not showing there either. Power light is on. This is a Lacie 2 TB Minimus USB 3.0 External Hard Drive [URL] "Doorbell" sound when I plug in or un plug the USB connector. The LaC ie troubleshooting page tells me to go to device manager, but like l said, it's not showing there either. Plus, it seems to have knocked out several of my USB ports, and I had the warning flag next to several of them in device manager ,but I was able to get them back by right clicking on each line one at a time, Un installing, and right clicking on the heading for the group, and selected "scan for hardware change" Then in the tray, I saw Driver was installed, or device is ready, something like that. All the ports seem to be working now, and the yellow flags are gone. I did then try the External drive again, but it is still not working. I also installed desktop manager, but it's telling me to plug in my external drive, and then to re start my device. And if I start Desktop Manager it says, "No LaCie Desktop compliant device found." So I have another computer that shares this monitor,so I shut this one down, and hooked up my usb keyboard and mouse to the other older desktop system running XP, and the older computer does recognize this external hard drive. It is in My computer on the older XP system/computer.
So I shut that one down and started this one, and it does not show up on this computer, but then I noticed my keyboard would not work. Had to switch the keyboard USB ports to the other front USB port. And I had the yellow flags back in device manager again. Had to un-install again and let the system re install ( selecting "scan for hardware change)
I'm having some trouble getting an external hard drive to be recognized by my computer. I have quite a few already, but I got another one because one of them won't read on my comp, although it will read on my netbook. The new drive I got has the same issue, no go on the comp, but works fine on the netbook.
I tried unplugging all of the other drives and even using the other cables to connect the new drive, but Windows 7 simply won't recognize it being plugged in. No "badump" sound and no icon in My Computer. Tried restarting, nothing. I tried it in all six of my computer's USB ports, but got no better result.
I just got a new laptop with Win 7. The computer sees the Iomega external drive, and tells me how big it is, how much space I have on it, but won't let me see the files.
View 2 Replies View RelatedI got a problem, my external hard drive (westen digital 1.0TB) isn't popping up my computer. I can see it in devices (USB to ATA/ATAPI bridge) but i can't acces it.What i've done already:Computer Management-> Disk Management. Than ive to initialize the disk, i can choose between MBR and GPT. In both cases i got the error: Data error (cyclic redundancy check). I can't chance any letter Downloaded different programs but non of them worked
View 2 Replies View RelatedI have attached a Seagate 500 GG external hard drive to my computer but it is not showing up in My Computer.I have browsed similar threads and on their advice gone into Device Manager.The drive is there but with no letter assigned to it but when I right click to assign one, it refers me to Windows Help, which is unable to solve the problem. There are actually two extra ikons in Device Manager - one marked FAT Healthy (EISA Configuration) and the other just marked (GPT Protective Partition).The device is acknowledged as working properly in Device Manager.The files on this drive were created on a Mac, which may be the source of the problem? Most of them I will therefore not be able to read, but there is one which is a .mov file which I should be able to read and hopefully copy - if I can access it.Is there any way I can access the drive via my PC (Windows XP) or will the drive have been formatted for Mac only and therefore is inaccessible via PC?
View 3 Replies View RelatedI am trying to transfer files on my external hard drive (Toshiba Canvio - Windows XP) to my new computer (Windows 7), but when I click on the file located on the external hard drive, I get the following messsage: "please select a valid job". How can I transfer all of the old files on my external drive to my new computer?
View 5 Replies View RelatedSome of my external drive find on the PC... Windows 7 and other external drives don't.. Those shows up in the printer and devices.. How do I get them to work as a letter drive in my computer....I have bought 2 floppy drives and don't work either... everything works on my laptop.... Just so much trouble to hook everything up..
View 3 Replies View RelatedCan see my external hard drive in device manager but not in my computer
View 1 Replies View RelatedMy Iomega external UBS drives does not show up in mycomputer by it does appear in the device manager.
View 2 Replies View RelatedCan I boot my Windows 7 or XP PC into a USB mode where the computer can be used simply as an external USB drive? Mac has this feature and it can be very convenient for large file transfers.how do I connect two PC to swap the files. Win 7 to XP?
View 5 Replies View RelatedI am attempting to help my friend. Has old laptop, been making system image backups with Macrium Free on external usb WD Hardrive. Now wishes to get new laptop and transfer pertinent data and programs to the new computer. I haven't a clue. He had not installed the HD programming, using macrium instead.
View 4 Replies View RelatedBacked up on Western Digital My Book Home Edition. Plug into new Dell XPS, and it is not recognized. How to retrieve files from hard drive?
View 6 Replies View RelatedMy computer does not recognize my WD1200B015-RNN external drive when I plug it in to the usb port. I now have windows 7. It previously worked on Vista?
View 1 Replies View Relatedmy desktop computer won't boot. When I turn it on it displays the welcome splash screen and then goes black. A message will then display that says CMD failed to start and then it will shut down. It does the same thing in safe mode as well.My question is. I have already set up the HD from the desktop as an external to my laptop so I could get files off it. Is there any way to do system restore on the hard drive when it is set as an external? Because I did this last night and I think if I restore the drive it will fix it.
View 2 Replies View Relatedi have two external hardrives, well a laptop hardrive and a desktop hardrive in enclosures, and they were working fine with windows 7, but then i installed a virtual disc program virtual clone drive and now they won't show up at all.
anyone else have a similar problem or know what may have happened, i already uninstalled the virtual clone disc program but it still won't load.
I made the HDD from my dead PC external. It does not show any of my Windows related documents or desktop folders. Is there anyway I can find and retreive them?
View 6 Replies View RelatedI am dual booting windows 7 and ubuntu 10.04 on a hp dv4 1162 tx laptop and have it plugged into a Benq monitor. That is the only monitor that i use and don't do any dual monitor things.
My dilemma is that this monitor does not show any of the boot screens and that means that i cannot choose which os to boot into. How can i make it show them.
My computer shows the space and everything else but doesnt show the folder and files in it like pictures and videos... and also i cant copy anything to it... on other computer there is no problem.
View 1 Replies View Related