New USB External HDD Won't Show In Computer
Oct 28, 2012
New external HDD won't show in "Computer". I Have searched a lot, but only find comments directing me to Disk management and Device manager. The Ext. HD is not showing there either. Power light is on. This is a Lacie 2 TB Minimus USB 3.0 External Hard Drive [URL] No "Doorbell" sound when I plug in or un plug the USB connector. The LaC i.e., troubleshooting page tells me to go to device manager, but like l said, it's not showing there either.
Plus, it seems to have knocked out several of my USB ports, and I had the warning flag next to several of them in device manager ,but I was able to get them back by right clicking on each line one at a time, Un installing, and right clicking on the heading for the group, and selected "scan for hardware change". Then in the tray, I saw Driver was installed, or device is ready, something like that. All the ports seem to be working now, and the yellow flags are gone.
I did then try the External drive again, but it is still not working. I also installed desktop manager, but it's telling me to plug in my external drive, and then to re start my device. And if I start Desktop Manager it says, "No LaCie Desktop compliant device found." So I have another computer that shares this monitor,so I shut this one down, and hooked up my usb keyboard and mouse to the other older desktop system running XP, and the older computer does recognize this external hard drive.
It is in My computer on the older XP system/computer. So I shut that one down and started this one, and it does not show up on this computer, but then I noticed my keyboard would not work. Had to switch the keyboard USB ports to the other front USB port. And I had the yellow flags back in device manager again. Had to un-install again and let the system re install (selecting "scan for hardware change). Windows 7 Home premium, 64 Bit, Compaq Desktop, model 2010.
View 3 Replies
ADVERTISEMENT
Nov 16, 2012
My External USB Hard Drive doesn't show up in My Computer Win 7 64bit.
I've just received my Western Element 2,5Tb today. When I first plugged it in, it worked normally. But due to my over-excitement, I copied too much files at the same time and it wasn't working anymore. I regretted doing this immediately.
I have searched on the internet to find some solutions but all of them didn't work. I've checked the Computer Management, Disk Management, but nothing about my External HD showed up. In the notification area, my laptop still detected it and I can removed it properly [even though i can't use it at all].
I tried to connect to my USB and another Samsung 500Gb HDD. And it worked perfectly fine. Then, I tried to connect my new HDD to my sister's lap [she is using Window Vista] and it worked perfectly fine too.
View 4 Replies
View Related
Dec 15, 2011
How do I get my external drives to show up in my computer as a letter and not in the printer and devices.... Some of my external drives works fine. Everything was working fine 3 months ago. Everything works fine on my laptop...
View 1 Replies
View Related
Mar 7, 2012
i bought a new external and it installs on my laptop and is in device manager but does not want to show in my computer.
View 2 Replies
View Related
Nov 13, 2012
I recently noticed an issue when trying to connect to external hard drives. Initially noted that it wasn't showing in 'my computer' and so assumed I had driver issues and sought to update them from Dell's site. After doing so there was still no change, but noted that It was appearing in 'device manager'.I even tried updating the USB hubs from the Device Manager, and it states that they are all up-to-date with the correct drivers. Both external hard drives that i have tried has worked on other PC's so i assume that mine is the issue.
View 1 Replies
View Related
Nov 23, 2011
I reimaged my computer because I was having a whole bunch of trubble with it (no of which really matter now). After reimaging I tried to access some of the files I saved on my external hard drive, but no matter what I tried I could not get access to the files.The drive appears in device Manager and in the USB Device pages, and I have tried uninstalling and reinstalling the drive. But for some reason I just can't access the device.
View 3 Replies
View Related
Oct 28, 2012
New external HDD won't show in "Computer" l Have searched a lot, but only find comments directing me to Disk management and Device manager. The Ext. HD is not showing there either. Power light is on. This is a Lacie 2 TB Minimus USB 3.0 External Hard Drive [URL] "Doorbell" sound when I plug in or un plug the USB connector. The LaC ie troubleshooting page tells me to go to device manager, but like l said, it's not showing there either. Plus, it seems to have knocked out several of my USB ports, and I had the warning flag next to several of them in device manager ,but I was able to get them back by right clicking on each line one at a time, Un installing, and right clicking on the heading for the group, and selected "scan for hardware change" Then in the tray, I saw Driver was installed, or device is ready, something like that. All the ports seem to be working now, and the yellow flags are gone. I did then try the External drive again, but it is still not working. I also installed desktop manager, but it's telling me to plug in my external drive, and then to re start my device. And if I start Desktop Manager it says, "No LaCie Desktop compliant device found." So I have another computer that shares this monitor,so I shut this one down, and hooked up my usb keyboard and mouse to the other older desktop system running XP, and the older computer does recognize this external hard drive. It is in My computer on the older XP system/computer.
So I shut that one down and started this one, and it does not show up on this computer, but then I noticed my keyboard would not work. Had to switch the keyboard USB ports to the other front USB port. And I had the yellow flags back in device manager again. Had to un-install again and let the system re install ( selecting "scan for hardware change)
View 1 Replies
View Related
Jan 17, 2009
i have two external hardrives, well a laptop hardrive and a desktop hardrive in enclosures, and they were working fine with windows 7, but then i installed a virtual disc program virtual clone drive and now they won't show up at all.
anyone else have a similar problem or know what may have happened, i already uninstalled the virtual clone disc program but it still won't load.
View 2 Replies
View Related
May 2, 2012
I made the HDD from my dead PC external. It does not show any of my Windows related documents or desktop folders. Is there anyway I can find and retreive them?
View 6 Replies
View Related
Aug 26, 2011
ok i have a western digital my passport external hard drive. its Mosley contains games and all of my music and a video. ive haven't even had it for a year and it is not showing up on my pc. i did what other forms that i looked at "going through the computer management and changing the later it doesn't work". but when i did it, it took like ten minutes to load up usually when it is in sleep mode. plus when it is loading i went into my pc and the window is not responding i tried to end it. so i unplugged the usb and everything worked again. it works on other pc's but mine. some of my friends said it could be a virus or a Trojan. i dont know what to do to fix this im thinking of getting a new hard drive but i want to make sure i can fix this before i spend $60-$70 on a new one.
View 6 Replies
View Related
Nov 16, 2011
My sent to only show dvd drive and external drive, I cannot send files to documents or folders.
View 1 Replies
View Related
Jul 27, 2010
I am dual booting windows 7 and ubuntu 10.04 on a hp dv4 1162 tx laptop and have it plugged into a Benq monitor. That is the only monitor that i use and don't do any dual monitor things.
My dilemma is that this monitor does not show any of the boot screens and that means that i cannot choose which os to boot into. How can i make it show them.
View 9 Replies
View Related
Oct 11, 2012
I have a Seagate External Hard drive, Desk Goflex 3 TB.I'm using it for sevral mounth in windows 7 and it's working fine.Now, I bought a new latop using windows 7 as well, and it's not recognizing my hard drive.The hard drive doesn't appear in the Disk Management at all.The computer does recognize other USB devices (disk-on-keys, mouse).
View 1 Replies
View Related
Jan 20, 2013
My computer shows the space and everything else but doesnt show the folder and files in it like pictures and videos... and also i cant copy anything to it... on other computer there is no problem.
View 1 Replies
View Related
Oct 1, 2011
My external hard disk up until a few weeks ago had been working perfectly. The next time I used it - windows 7 will not recognise it. I have tried different USB ports and computers. But it doesn't seem to work. It doesn't show up in device manager or disk manager. Its like nothing is plugged in. I tried switching hard disk cases and power supplies. But still nothing. The hard disk seems to try and run every so often, the light flashed red and it makes whirring noises as if it was connecting to the computer.
I dont know what else to do ? And it has almos 1500 GB of data.
View 1 Replies
View Related
Oct 28, 2011
i bought a trix hard drive enclosure/case for my 2.5 250GB hard drive. I connected everything up and inserted the hard drive usb into my laptop but windows will not show the drive in my computer. It does make the beeping noise telling me its detected the drive and it also shows in device management.The strange thing is i tried installing linux on it and it did, but the computer will not boot into it from the enclosure, but does from the hard drive. Ive also tried it on 2 computers and both will not assign the drive and give it a drive letter.
View 2 Replies
View Related
Apr 4, 2012
my monitor exhibited signs of flickering during start-up, but only minor ones and would just stop at the 'Welcome' screen of windows so I didn't give it much thought. Iv'e been using it with the cpu the same time I bought the monitor.But after some time, the flickering got worse. It went from 1-2 second interval flickers to a whole 10 seconds of blackness before it showed anything.Now,Iv'e got a new cpu but still using the old monitor. After a day or so, the monitor exhibited the first symptoms of my first cpu, so I just dismissed it. But after a week, It got a hell worse, before I even start-up my computer, the monitor doesn't show Analog/Digital at the top-left corner of the screen. PLUS my cpu keeps restarting after I pushed the ON button after 10 seconds or so. Is the monitor responsible for the restart and what could be the reason for the flickering?
View 3 Replies
View Related
Oct 23, 2011
.I didn't wait for the computer to tell me it was ok to remove the drive in the usb port. Now my computer no longer recognizes the external drive After removing my external hard drive (without the ok) my computer no longer recognizes the external hard drive. What do I do.
View 1 Replies
View Related
Feb 21, 2010
So the drives in question are 3 Seagate 1.5tb 7200.11 HD's.
They show up fine in the BIOS where they are all listed as slaves (ga-p55-ud4p) and in Device Manager - which lists them all as working properly. I cannot distinguish one from another in Device Manager, and the one that is working has very important legal files on it.
However, I can only see one in "My Computer" - but the other 2 I cannot "see" them so I cannot access them.
The one I can see is the oldest one and was not altered when the older PC was upgraded (upgraded all components except HD's and OS). I also kept 2 older WD 500AAKS which are both working fine as well.
The two I cannot see: One is brand new. The other was reformatted to blank (quick) on another PC (which was upgraded to Win7 at that time) which subsequently could not see the drive. I moved it over to this faster PC and still cannot see it.
All these 1.5tb Seagate drives are CC firmware so are not part of the older firmware issue. None have any 1.5gb jumpers on them.
Mobo drivers are all fully up to date - I just re-updated all of them. Windows is up to date. Windows does show in the Troubleshooter that a USB controller driver is not found and I cannot seem to find out how to install it (via uninstalling it, updating drivers, etc etc - question thread
http://www.tomshardware.com/forum/270613-30-ud4p-win7-64bitpro-controller-driver
ga-p55-ud4p rev.1, i7 860, 4gb gskill eco ram, xfx 5890, Seasonic X750 gold, very cool system...
What gives? Any ideas?
View 7 Replies
View Related
Dec 5, 2012
I hooked up Corsair SSD with XP pro.Computer does not show HD.I have 45 gb corsair accelerator. Do need drivers?
View 1 Replies
View Related
Mar 10, 2012
I have just bought a used copy of Age of Empires 3, but when I put the Cd in my disk drive, nothing happens and I get no messages of any sort. I have A windows 7 laptop in good working order, and with the requirements to play the game. Can any one tell me if a game disk can become damaged enough that it won't play, or is there some other problem?
View 5 Replies
View Related
Sep 6, 2012
After install windows 7 everything fine until I install all Asus driver Intel chip all my HDD DVD is missing not show up on my computer anyone having problem? In bios it show up all HHD DVD ROM.
View 1 Replies
View Related
Jun 17, 2011
how to display language bar?
View 1 Replies
View Related
Dec 16, 2011
my computer will not show on desktop but only in taskbar
View 1 Replies
View Related
Jan 2, 2012
I want to transfer files from my ipod to my computer but when I look for my ipod in "my computer" it doesn't show as a drive. I can use it with I tunes, it works fine but for my purposes, I need to access the files on the drive in "my computer" I am using windows 7
View 3 Replies
View Related
Aug 7, 2012
where do i find "my computer""
View 2 Replies
View Related
Sep 6, 2012
Such as a mouse, a mobile, or an external drive.I mean make them visible (in My Computer) even though they're not connected so it's easier to remember what devices I use. My memory is awful, don't ask.Obviously I know I wouldn't be able to access the files unless the devices were connected, but the point is to make their icons show up as if they were connected even though they won't actually be of any use.
View 2 Replies
View Related
Dec 28, 2012
I have a hp pavillon dv-9000 running win 7 pro.......this laptop when give to me was in bad shape.... At one point i had the cd/dvd rom drive working yet in the middle of loading windows files it stoped working.... Knwoing the bios has only the driver for win vista i thought the driver for cd/dvd might not work.. So i droped win 7 on a usb flash drive..... The os is up n running.... So far no real troubles.. Ive had to jump around to find drivers for this..Any ways i still dont have a cd/dvd driver nor any place in the device manager to even update the driver..Gren ligh on cd/dvdrom door..... Oh and i have a replacement cd/dvdrom drive. That when i install i no longer have a green light on door it is red..... Funny thing is it dont show in my computer or device manager yet in the bois it is enable.. Yet dont read in boot list? Humm wait now my head forgot if it reads in boot list or not... Ill check it again to make sure im right... So thinking this over...
View 1 Replies
View Related
Oct 31, 2012
I was on a flight with EasyJet today, and, the cabin manager confirmed that WiFi was available on the aircraft, and, as a matter of fact Windows 7 was indicating that new connections were available, however, I had a blonde moment. I could not browse anywhere to discover the name of the network and try to connect. I think that this is a design flaw, as WinXP allows users to discover new SSIDs, or else the SSID is configured in some way that it cannot be found is it possible?
View 2 Replies
View Related
Feb 1, 2009
How to Show Windows 7 Computer Drive Letters Before or After Drive Name ?
View 0 Replies
View Related
Nov 19, 2011
In network explorer PC are shown by computer name but computer description does not appears.
View 2 Replies
View Related
