After install windows 7 everything fine until I install all Asus driver Intel chip all my HDD DVD is missing not show up on my computer anyone having problem? In bios it show up all HHD DVD ROM.
I'm working on a computer with a RAID setup. It is 2 hard drives 500gb each showing up as 1tb in windows. Both drives show up in the bios but all of a sudden when trying ot start the computer I get a "Operating system is missing" error.
I'm trying to run a chkdsk form a win 7 64 bit disk and telling it to run on H; (system drive) but it says 'cannot open volume for direct access'.
The other drive, C: is just a recovery drive built into dell computer systems. I tried using a boot cd and running mbrfix to no avail.
my monitor exhibited signs of flickering during start-up, but only minor ones and would just stop at the 'Welcome' screen of windows so I didn't give it much thought. Iv'e been using it with the cpu the same time I bought the monitor.But after some time, the flickering got worse. It went from 1-2 second interval flickers to a whole 10 seconds of blackness before it showed anything.Now,Iv'e got a new cpu but still using the old monitor. After a day or so, the monitor exhibited the first symptoms of my first cpu, so I just dismissed it. But after a week, It got a hell worse, before I even start-up my computer, the monitor doesn't show Analog/Digital at the top-left corner of the screen. PLUS my cpu keeps restarting after I pushed the ON button after 10 seconds or so. Is the monitor responsible for the restart and what could be the reason for the flickering?
So the drives in question are 3 Seagate 1.5tb 7200.11 HD's.
They show up fine in the BIOS where they are all listed as slaves (ga-p55-ud4p) and in Device Manager - which lists them all as working properly. I cannot distinguish one from another in Device Manager, and the one that is working has very important legal files on it.
However, I can only see one in "My Computer" - but the other 2 I cannot "see" them so I cannot access them.
The one I can see is the oldest one and was not altered when the older PC was upgraded (upgraded all components except HD's and OS). I also kept 2 older WD 500AAKS which are both working fine as well.
The two I cannot see: One is brand new. The other was reformatted to blank (quick) on another PC (which was upgraded to Win7 at that time) which subsequently could not see the drive. I moved it over to this faster PC and still cannot see it.
All these 1.5tb Seagate drives are CC firmware so are not part of the older firmware issue. None have any 1.5gb jumpers on them.
Mobo drivers are all fully up to date - I just re-updated all of them. Windows is up to date. Windows does show in the Troubleshooter that a USB controller driver is not found and I cannot seem to find out how to install it (via uninstalling it, updating drivers, etc etc - question thread
New external HDD won't show in "Computer". I Have searched a lot, but only find comments directing me to Disk management and Device manager. The Ext. HD is not showing there either. Power light is on. This is a Lacie 2 TB Minimus USB 3.0 External Hard Drive [URL] No "Doorbell" sound when I plug in or un plug the USB connector. The LaC i.e., troubleshooting page tells me to go to device manager, but like l said, it's not showing there either.
Plus, it seems to have knocked out several of my USB ports, and I had the warning flag next to several of them in device manager ,but I was able to get them back by right clicking on each line one at a time, Un installing, and right clicking on the heading for the group, and selected "scan for hardware change". Then in the tray, I saw Driver was installed, or device is ready, something like that. All the ports seem to be working now, and the yellow flags are gone.
I did then try the External drive again, but it is still not working. I also installed desktop manager, but it's telling me to plug in my external drive, and then to re start my device. And if I start Desktop Manager it says, "No LaCie Desktop compliant device found." So I have another computer that shares this monitor,so I shut this one down, and hooked up my usb keyboard and mouse to the other older desktop system running XP, and the older computer does recognize this external hard drive.
It is in My computer on the older XP system/computer. So I shut that one down and started this one, and it does not show up on this computer, but then I noticed my keyboard would not work. Had to switch the keyboard USB ports to the other front USB port. And I had the yellow flags back in device manager again. Had to un-install again and let the system re install (selecting "scan for hardware change). Windows 7 Home premium, 64 Bit, Compaq Desktop, model 2010.
I have just bought a used copy of Age of Empires 3, but when I put the Cd in my disk drive, nothing happens and I get no messages of any sort. I have A windows 7 laptop in good working order, and with the requirements to play the game. Can any one tell me if a game disk can become damaged enough that it won't play, or is there some other problem?
I want to transfer files from my ipod to my computer but when I look for my ipod in "my computer" it doesn't show as a drive. I can use it with I tunes, it works fine but for my purposes, I need to access the files on the drive in "my computer" I am using windows 7
My External USB Hard Drive doesn't show up in My Computer Win 7 64bit.
I've just received my Western Element 2,5Tb today. When I first plugged it in, it worked normally. But due to my over-excitement, I copied too much files at the same time and it wasn't working anymore. I regretted doing this immediately.
I have searched on the internet to find some solutions but all of them didn't work. I've checked the Computer Management, Disk Management, but nothing about my External HD showed up. In the notification area, my laptop still detected it and I can removed it properly [even though i can't use it at all].
I tried to connect to my USB and another Samsung 500Gb HDD. And it worked perfectly fine. Then, I tried to connect my new HDD to my sister's lap [she is using Window Vista] and it worked perfectly fine too.
Such as a mouse, a mobile, or an external drive.I mean make them visible (in My Computer) even though they're not connected so it's easier to remember what devices I use. My memory is awful, don't ask.Obviously I know I wouldn't be able to access the files unless the devices were connected, but the point is to make their icons show up as if they were connected even though they won't actually be of any use.
I have a hp pavillon dv-9000 running win 7 pro.......this laptop when give to me was in bad shape.... At one point i had the cd/dvd rom drive working yet in the middle of loading windows files it stoped working.... Knwoing the bios has only the driver for win vista i thought the driver for cd/dvd might not work.. So i droped win 7 on a usb flash drive..... The os is up n running.... So far no real troubles.. Ive had to jump around to find drivers for this..Any ways i still dont have a cd/dvd driver nor any place in the device manager to even update the driver..Gren ligh on cd/dvdrom door..... Oh and i have a replacement cd/dvdrom drive. That when i install i no longer have a green light on door it is red..... Funny thing is it dont show in my computer or device manager yet in the bois it is enable.. Yet dont read in boot list? Humm wait now my head forgot if it reads in boot list or not... Ill check it again to make sure im right... So thinking this over...
I was on a flight with EasyJet today, and, the cabin manager confirmed that WiFi was available on the aircraft, and, as a matter of fact Windows 7 was indicating that new connections were available, however, I had a blonde moment. I could not browse anywhere to discover the name of the network and try to connect. I think that this is a design flaw, as WinXP allows users to discover new SSIDs, or else the SSID is configured in some way that it cannot be found is it possible?
How do I get my external drives to show up in my computer as a letter and not in the printer and devices.... Some of my external drives works fine. Everything was working fine 3 months ago. Everything works fine on my laptop...
Our computer has wireless internet connection. Network type: Access Point Security Type: No authentication (Open) Encryption Type: WEP. "Show characters checkbox" is greyed out (There definitely is a password.) How can we show the Wifi password?
My computer doesn't show asian characters...including languages like Hindi, Arabic, Chinese(all), Japanese, Korean, Gujarati etc....I have many files in these languages but because of problem it shows only boxes in file names....There is no problem in displaying characters in browsers and word processors...Sometimes it shows all characters correctly but sometimes it doesn't. After reboot it shows them correctly, but not every time.
I have an issue where my flash drive periodically won't show up in My Computer... when I insert it, I hear the 'hardware insert' sound but no drive in my computer and no autostart. it doesn't show in device manager and clicking 'refresh' does not make it show up! if I remove the flash drive, the drive appears in 'my computer' for a second then disappears... the same problem occurs when I plug it into another port... I have four ports, only three of them are not used by something plugged in permanently... usually I have to insert the flash drive into random ports at least 5 times before it displays the drive...
I have five Sata drives. Of these five, Windows 7 Pro 64 "Computer management" reports that two of them still are 100% free despite both having significant usage as reported in "Computer" and "Explorer"
I recently noticed an issue when trying to connect to external hard drives. Initially noted that it wasn't showing in 'my computer' and so assumed I had driver issues and sought to update them from Dell's site. After doing so there was still no change, but noted that It was appearing in 'device manager'.I even tried updating the USB hubs from the Device Manager, and it states that they are all up-to-date with the correct drivers. Both external hard drives that i have tried has worked on other PC's so i assume that mine is the issue.
I have sony laptop, i have install the internet driver, but i cant access network. i connect through wifi and i have all info of wifi eg. Username and pasword but that shows no internet access so