Post Cloning Of OS Hard Drive

Oct 15, 2011

I have on my laptop (a thinkpad, from Lenovo) Windows 7 Professional, obtained via something called "MSDN Alliance" and my university. A few weeks ago, I finally had the opportunity to upgrade my hard drive. Thus, I placed the new disk in a USB case, plugged it in via USB, and performed a disk clone via a software from a company called EASUS. I then removed the old disk, placed the new one in its location (that is, inside the laptop), and removed the USB equipment. Good as new, I though. And everything appears to be working fine -- except the "nag screen" that seemingly randomly pops up out of nowhere and tells me that I am using a (I don't recall the text exactly at this moment) less that legal/legitimate installation of Windows. I can check if Windows has been activated -- and it has (of course, I did this after having installed it) (i.e., on the "old" disk), I have tried searching for solutions, however I only find issues when similar clonings have changed the drive letters.

View 9 Replies


ADVERTISEMENT

Cloning A Laptop Hard Drive And Using New Hardware?

Sep 7, 2012

I've got a laptop with a piece of really expensive software that is not transferable. As this software has been upgraded over the years, it has required more system resources in order to run smoothly. I am running Windows 7 UltimateIs it possible to clone the laptop's hard drive onto another one and place the new hard drive into a computer with better hardware???What would be the best software for this or is it ok to just use Windows 7 System image utility?

View 6 Replies View Related

Windows 7 64 Bit Cloning On To Blank Hard Drive

Jul 29, 2012

I have this current set up on my computer: 250Gb HDD ( C drive) - contains windows 7 64 bit OS, steam and other files. 360Gb HDD ( D drive) - Partially deleted and defunct windows vista. Some games and files on.

I recently purchased a 3Tb internal HDD, and wish to create the following setup:

3Tb internal HDD (C Drive) - contains the 250 and 360 GB HDD's cloned onto it. 250 and 360 Gb HDD's - Completely wiped and used for backup and storage.

I would also like the 250 and 360 Gb HDD's to be recognised seperately, AS IF they were seperate drives, while remaining on the same 3Tb HDD.

I can only use free software. I also do not want a RAID setup.

View 1 Replies View Related

Cloning A Hard Drive With Windows 7 Installed?

Jun 11, 2012

My company clones hard drives for deploying our software (each software comes with a new computer and a new windows license). We clone the drive to avoid installing the mother board drivers, windows updates, sql server, etc etc each time. This worked great with Windows XP but with Windows 7 we get a boot error on the clone: "Windows failed to start. A recent hardware or software change might be the cause. To fix the problem..." We are a small company and it really is a pain to re-install everything for each new release we do.

View 4 Replies View Related

Windows Won't Start After Cloning Hard Drive

Feb 1, 2011

i just cloned the OS hard drive in my computer from an 80GB to 160GB (both IDE) using acronis true image enterprise edition.

the clone process completed fine, but when i try to start the computer with the new hard drive plugged in (power and data cables disconnected from the old drive) i get the 'disk boot failure, insert system disk and press enter' message when the OS is supposed to startup.

i booted to the windows 7 OS disc and chose the repair option which detected that there was a startup issue with the disk and apparently fixed it, but when i restarted the computer i still get the same error message. i also used the startup repair option from the windows OS disc but it didn't detect any issues.

the interesting thing is that i can boot the new hard drive while the OS disc is in the DVD drive, but if i take it out i get the message again. i've also tried changing the jumper settings on the hard drive (master/single to cable select) but that didn't make a difference.

View 9 Replies View Related

Hard Drive Won't Boot After Post?

Mar 25, 2012

After removing a virus with malwarebytes the next day the computer (Dell studio xps running Windows 7 64 bit 8Gb) will post but then goes to black screen with blinking cursor and continuous beep. Removed and reset memory, CMOS battery, etc. BIOS sees the SATA drive. Booted from Win 7 disk - recognized the hd but disk repair did not work - was able to restore to a restore point, but after reboot, same thing. Finally took out hard drive and placed in another Dell computer to see if it was the drive or something else - it's the hard drive - computer sees it, but after post goes to black screen. Attached to my Mac and was able to back up files, but would really like to be able to repair windows to keep programs

View 2 Replies View Related

No Success With Cloning Hard Drive With Norton Ghost

Sep 16, 2012

I want to clone my existing laptop hard drive to a hard drive that I have encased as an external hard drive. My current HD is in two partitions - C: and D:. Norton Ghost told me that I would have to copy one partition at a time. Fine. After I copied C:, I went back to copy D:, but before beginning it says - warning/any existing data on the destination drive would be deleted. So how am I supposed to move one drive at a time? I don't want multiple partitions on my new HD if I can help it.

I went ahead and began copying D: onto my external drive, and when it was done, I now can't see that drive in Windows Explorer. In Disk Management I see the drive, but it looks like there isn't any data on it from the amount available. So it looks like I"m back to square one.

View 5 Replies View Related

Cloning To Western Digital External Hard Drive

Jan 15, 2013

i've been asked to set up 6 brand new Dell laptops bought for my software engineers in the industy - i have been given a 7th Dell laptop same as the other 6 which has had all the required software needed by our engineers for the machinery programing process installed on it - i've also been given a 1TB western Digital {USB connected} external hard drive for cloning the software and transfering it on to the other laptops, so this afternoon i cloned the 7th laptop with all the software on it using system back up - creating a system image file on the external hard drive, but when it came to transfering this image on to the other laptops, i thought i'd beable to restore {set up the C: drive} the new laptop from the file path E: {the external hard drive path} but it doesn't have the option {E: drive or USB input or external drive} only system restore/back up disk or network path, i can't use the network path as the company has access/permission,firewall blockers that basically stop our engineers laptops from working on customers sites when online, which kind of stops any work from happening, and is why the company.

View 6 Replies View Related

Cannot Log On After Cloning Hard Disk

Jun 26, 2010

I migrated from a 250 GB HDD to a 500 GB. I had around 230 GB of information wich I really didn't want to loose, so I cloned the old HDD to the new one with the software Acronis True Image Home.

Apparently, the cloning succeds, but when I disconnect the old Disk and try to boot from the new one, when I log on I get stuck in "preparing your session".

View 9 Replies View Related

Hard Disk Cloning Software?

Aug 17, 2009

Can anyone tell me is there any Hard Disk Cloning program similar to the Seagate Disk Wizard or Norton's Ghost that is compatible with Windows 7I tried using the Seagate Disk Wizard which I'd been using succesfully under WIN XP PRO and it creamed my backup HD and I had to reformat itPerhaps there is a Windows 7 version of SDW available or coming soon

View 9 Replies View Related

New Disk Drive - Cloning One Partition Of Multi-part Drive?

Aug 13, 2012

I have a generic System 7 64 bit system with a 1 TB SATA drive. It has one hard drive which I have partitioned into 4 partitions, with C: being where I put all the system software. The board has mulitple SATA ports.Change considered: cloning the C: partition onto a new SSD so that I can get the performance boost of an SSD. There are some heat problems with existing hard drive so I probably need to change it out, so I would also like to clone the D:, E:, and F: partitions to a new hard drive.I have cloned a single physical drive to another physical drive, and the software (Ghost, or the like) usually handles it ok, so that all I need to do is adjust some partition sizes, and then disconnect the old hard drive and everyting is good. This includes cloning a single hard drive with multiple partitions to being cloned to a new single hard drive with identical numbers of partitions.Compared to my prior experience, is there something different about cloning one partition only vs cloning the whole drive. My proposed plan is:

1) Install SSD
2) clone C: to SSD only
3) clone D: E: F: of old drive to new drive.
4) remove old drive.

View 5 Replies View Related

Cloning: Destination Drive Not Being Partitioned?

Jul 22, 2012

I am trying to use Seagate discwizard, to clone my hard drive to another. When I went through the process, the new HDD received only the C partition and not the D.

I really don't want to format the hdd and reinstall!

View 2 Replies View Related

[64-bit] POST Stalls At USB Drive?

Sep 17, 2012

I've done a search for issue and found none. I have a 2 Terabyte Seagate USB drive.When I try to boot with this USB drive connected to computer the POST hangs. Once I remove the USB drive the system boots as normal. My system also has a USB RF Transceiver for the keyboard and mouse. It causes no problem though just the drive.

View 9 Replies View Related

Cloning C Drive And System Reserved Portion?

Dec 26, 2012

I installed a new ssd drive and cloned my c drive onto it. It also cloned my system reserved partion [about 25 megabytes]. I then, at a later date, cloned my c drive [now my new ssd drive] again back to my old primary drive so that i have an up to date copy of my primary drive. But it also cloned my system reserved partion. Can i delete some of these system reserved partions. I now have 3 of them! It makes my computer look very untidy. What ones should i leave or do i need to leave them all?

View 1 Replies View Related

Extra Used Space After Cloning A Drive With Acronis

Jan 15, 2013

I have just cloned my d: drive, 500 gb to a new 1 terabyte drive f:

drive f: has 49 gig more used space then cloned drive d: users on drive f: is 39 gig larger than users on drive d: the d: drive also has around 50 gigs less used space.

all the other folders are the same size, so not only have I cloned, somehow an extra 49 gb to the f: drive but 10 gb seems to have 'gone'! I used Acronis True Image WD Edition and everything appeared to go well. I don't want to format my other drive as extra storage until I have some idea what has happened.

View 2 Replies View Related

Cloning C Drive And System Reserved Partition?

Jan 7, 2012

I installed a new ssd drive and cloned my c drive onto it. It also cloned my system reserved partion [about 25 megabytes].I then, at a later date, cloned my c drive [now my new ssd drive] again back to my old primary drive so that i have an up to date copy of my primary drive. But it also cloned my system reserved partion. Can i delete some of these system reserved partions. I now have 3 of them! It makes my computer look very untidy. What ones should i leave or do i need to leave them all?

View 1 Replies View Related

Cloning Program Drive And Data Drives From XP To Windows 7 Laptop?

Sep 28, 2011

I am trying to moved everything---program files as well as data files---from one laptop to another. The source is XP, the destination Windows 7 Home Premium 64. From what (little) I understand, most imaging programs clone everything, including the XP register and boot drive. But how can you then boot the Windows 7 machine to run the programs that were originally instaled in XP?I know I can just drag over the data files and re-install all the software, but I am not sure I will live long enough to complete that task.

View 2 Replies View Related

USB Flash Drive Preventing POST, Others Work Fine?

Mar 5, 2012

I have three flash drives, one a 1gb HP flash drive, one a 2gb Sandisk Cruzer, and one a 16gb Patriot XTWhen the HP 1gb drive and Sandisk 2gb are plugged in during boot, nothing happens. It POSTs fine and starts windows.When the Patriot drive is plugged in during boot, the BIOS hangs 2/3rds of the way through POST.I have tried multiple formatting schemes. Also note that there is absolutely nothing on any of these drives, they are empty and freshly formatted.1gb formatted to FAT works, FAT32 works, exFAT works, all regardless of allocation size.2gb formatted to FAT works, FAT32 works, exFAT works, all regardless of allocation size.16gb formatted to FAT32 fails, exFAT fails, regardless of allocation size. have tried a full (non-quick) format to check for bad sectors, to no avail I have tried HP format tool rather than windows format tool, to no avail.So at this point I'm thinking it's the Dell BIOS at fault here, and I'm going to have to dualboot instead of making a multiboot drive.

View 5 Replies View Related

Clone Hard Drive To 64gb Flash Drive And Restore To Another Hard Drive?

Nov 14, 2012

I have a hard drive I want to backup to a 64gb flash drive and then restore it to another different hard drive than where it came from. I have windows 7 and office on my laptop and I want it on my desktop pc. There isn't close to 64gb of info on my laptop so it should be fine even though the hard drive says I have 160gb. It is all free space except for those programs.

View 3 Replies View Related

Way To Expand Drive Size After "cloning"?

Sep 13, 2012

The title I chose was probably not the best, come to think of it. It isn't so much the resizing part of this process as it is all the rest of it that I seem to be having problems with.Okay, first of all I need to specify that I'm just an average user when it comes to Windows 7 and hardware nitty gritty. to which I am very grateful. And here I am again, hat in one hand and a problem in the other. Here's the situation: I have a laptop whose hard drive I've outgrown, so I bought a larger one for the machine. I also bought a USB-based enclosure so I'd be able to have the drives share data. I installed the new drive into the laptop, and put the old one in the enclosure. The old drive is 160 gigs in size with only about 3 gigs open. The new one is 500 gigs.

I used Clonezilla to clone the 160 to the 500. This worked perfectly. But I wound up with a new drive that still only had 3 gigs open. There were about 340 gigs left unallocated. So I used another Linux-based utility -- Parted Magic -- to reclaim the unallocated space.Okay, I need to back up for a second. The old drive has two partitions, call them C and D. The D partition is fairly small -- about 10 gigs.So Clonezilla cloned both partitions at their original sizes, but the funny thing was, it set the D partition ahead of the C partition. When I picture the graphic display that I get with a disk partition program, in my experience, the left most partition is the root partition, or "C". But for some reason, Clonezilla put D there, and C to the right of it. Well, I thought it probably doesn't matter because the OS can boot from other than the root partition -- or whatever it's proper term is -- from what I understand. So I expanded both in Parted Magic to take up all the unallocated space. Then I ran it and everything was set.

Went to boot the computer and no go. It couldn't find the boot sector or whatever. I didn't write down the error message so I don't recall the precise wording, but that is essentially what it was telling me. So I booted Parted Magic again, and took a look. Well, the "C" drive had the "boot" flag set, so I didn't really understand what the problem was other than it being out of place.So this time I deleted the D partition so that C was the only one and moved C down to take up D's space. Linux is assigning each of these partitions a name or descriptor, like sba1 and sba2. Well, D got the sba1 and C got the sba2. When I deleted D, C's descriptor didn't change. It's still sba2. I dunno if this will matter or not.Right now, I'm waiting for PM to finish moving the data as the C partition is expanded. Got another hour or so to go before it's done. I guess I'll find out if my workaround has worked.

My object was to transfer all the data from the old disk to the new, and to be able to access all the space in the new drive (duh). I also wanted C and D partitions. After the moving and expansion of C has been completed, there will be about 275 gigs of unallocated space left. My thinking is that if my latest attempt is successful, I'll go back and configure the unallocated space as D and then copy D's data off the old drive onto the new.So anyway, the point of this long-winded post is to ask the all-knowing forum mind how I should have done it and whether what I'm doing now will work. So the next time I can avoid the hours I've spent spinning my wheels. If I have to start all over, I'm prepared to do that, but before I do, I would like to find a way to "clone" the old drive (probably not the best word choice) AND expand the two directories at the same time. Clonezilla did not allow for this, near as I can determine, so I'm wondering which other Linux-based utility I can use? I've got a couple of disks of Linux utilities, and for all I know I might have one of them already. From what I've recently read there's also a Windows 7 Disk Management Tool that can do the resizing? I'm not at all familiar with it.

View 8 Replies View Related

Upgrading Hard Drive On A Solid State/Hard Drive System?

Oct 25, 2011

So, I have a i7 2600K system with a solid state disk as the boot drive, and an older (c2008) Samsung Spinpoint F3 500GB drive as the data drive for programs (that I deem as not worthy of the quick load times). The hard drive has given me some errors over time, and I bought a hard disk to replace it (a Hitachi 1TB). The issue I'm having is that the fact that Windows 7 puts a small (100MB) partition on the F3, and for some reason, even though I'm running Acronis 2012, it doesn't seem to be able to clone the F3 over to the Hitachi. I've also tried Drive XML, and for my 2 hour wait, I only managed to acquire a boot error. Thankfully, I've not done anything rash to destroy the data on the F3, but given the fact that I've seen corrupted files in Steam from that drive, I'm not will to trust it long term with my data. I really need to get the data onto that Hitachi, though... Anyone have any advice for upgrading the HDD in a SSD/HDD system? I don't really feel like it should be so hard, especially if I've bought Acronis True Image, but maybe they haven't designed their product to handle this scenario quite yet? 

View 9 Replies View Related

Computer Is Not Booting Hard Drive/Unresponsive Hard Drive?

Jun 16, 2011

I have a HP Touchsmart IQ500. Turning my computer PC on today, all I got was a blue HP invent screen with setup, boot menu, system recovery, and system diagnosis, and I could not get past it. I entered the BIOS and figured out that the hard drive was listed as "not installed." Pretty sure that is the main problem.I tried a system restore (with the Windows 7 install disc), but I guess the computer couldn't read the hard drive enough to enter safe mode (I tried restarting and F8ing several times). I put in an external hard drive, and the BIOS read it; however, windows does not allow you to partition an OS on a hard drive.

View 2 Replies View Related

Make Internal Hard Drive Into And External Hard Drive?

Mar 30, 2012

I have an internal hard disk not in use ,and I would like to make it as external disk !I looked on the net and I found I should have the " encelsure " butt I think I wont find it here in my city .So is there another way ? like usb -esata cable

View 3 Replies View Related

Internal Hard Drive Acting Like An External Hard Drive?

Mar 4, 2010

Me and my brother built me a new computer from scratch (he did the building - i did the watching). I purchased an internal hard drive from Overclockers UK. It's a Samsung 1TB drive. I also have a 64 Solid-state drive in there as my primary hard drive that Windows was installed on and a couple of programs are installed on. My storage disk (the 1TB disk) is for all my music/films etc. Whenever I drag and drop a file into the Samsung hard-drive - it copies it rather than moves it instantly.When I had a laptop, I had 3 external hard drives and this is the way it copied files onto them.how I can get the internal drive to stop acting like an external drive?

View 6 Replies View Related

Transfer Files From Bad Sata Hard Drive To New Hard Drive?

Dec 24, 2011

I have a virus infected sata hard drive with windows 7 on it. It has the win 7 anti virus 2012 on it, and it's a cybercriminal virus. I have lots of files I want to transfer to the new sata drive. I already have windows 7 installed on the new drive. How do I get the files from the bad drive to the new one?

View 4 Replies View Related

Software To Transfer Files From One Hard Drive To Another Hard Drive?

Jan 21, 2013

I have a USB Webcam 6.1.7601.17514 from Microsoft installed on a Fujitsu Laptop (Windows 7 ) and I want to copy and install it on another Fujitsu laptop (Windows 7).The other laptop the camera is not working and there is no webcam driver installed.

View 1 Replies View Related

Install Vista On One Hard Drive, Win 7 On Hard Drive 2

Nov 16, 2009

I have Vista installed on my Hard Drive, 250 GB.

But i recently purchased a 2nd Hard Drive, 500 GB, and i want to install Windows 7 on it.

Is that possible, to have both separately?

View 3 Replies View Related

Hard-drives Apparently Corrupted After Attempted To Install A Second Hard Drive?

Oct 8, 2011

make a dualboot comp by adding windows XP to a new partition. I created the new partition with 20gb. (From the 500 of my actual harddrive)But before I actually installed on that, I got distracted with a second harddrive that my dad got(for no reason). It had a full copy of Windows XP backed up on it from another computer, so I figured I would just use that for the dualboot. I plugged it in (wired the same way as my old harddrive, but different data slot), restarted, checked the harddrive in explorer - all the data was there / reading correctly / etc, and I used 'easyBCD' to add the new harddrive to the boot list.(Which, of course, crashes if I try to start it. I just wanted to see what it would do). For a reason I can't remember, I unplugged the second harddrive for a bit, started the computer on accident (I don't know if anything loaded before I shut it off), and then when I plugged it back in.Windows 7 would not launch. It goes to a DOS-like window, except it's just a flashing _ and it never does anything even after a few minutes. XP didn't work still.. so I decided to reinstall XP (as I couldn't tell which harddrive was which on the list, I unplugged the main harddrive while installing onto the new).. and when I did this.. it formatted and installed fully... then restarted.. then restarted.. and restarted.. and just kept restarting, never showing any thing past the manufacturer logo/BIOS load-button-message-thing. So, I then try to use my 3-disk Windows7Recovery disk(burned myself with a program apparently included by the manufacturer.) It installed fully, appearing to work.. but when I launched it, it said "Invalid Partition Table" and wouldn't boot past that. When I insert my driver installer disk, it gives me a basic DOS window thing. dir A: shows the files in the disk. dir B: for some reason shows the same. C: says "Error reading from drive C: DOS area: general failure". All other letter:'s just say "invalid drive". (I'm doing this with both harddrives in.) I attempted connecting the harddrives to an old computer, but it gave an error for both. (It detected the harddrives, but said it had an error reading from it. Windows Explorer asked me to format it... {i'm willing to format one of the drives if anybody thinks it will help, but the old harddrive has data I'd prefer not to lose.} ) Looking on google, I saw several problems that all have similar problems (less overdescripptive than I am though) but none of the fixes suggested worked for me. Also - as I have two different with different errors, I only need to make one of them work.)Also - my other available computer has a CD burner / floppy drive if either are required. I also have several USB's. The computer can boot from USB's and CD's (tested), and I could easily take the floppy thingy and connect it to the computer.also - this computer is probably still under warranty unless unscrewing the hard drive voids it. .. does that count as modification of the computer?

View 5 Replies View Related

Cloning HD In Windows 7?

Sep 11, 2011

I am running W7/64 in a Dell Inspiron. I discovered that Windows Backup did not give me back my folders when I needed them and I don't want to use it again. In all previous OSs I have used Apricorn/Acronis which backed up from BIOS and produced an external HD copy which would boot automatically and restore the complete disk, or one could select folders and files to move back. Simple and elegant.

i searched for "clone" information in "Windows 7" and got information mostly for other XP, Vista, etc. But I did see that the free XXCLONE was mentioned and I would like to hear from anyone who has used XXClone in Windows 7 to report on its value, problems, etc.

View 9 Replies View Related

External Hard Drive - Drive Letter Changed - Unable To Change Back?

Aug 21, 2012

I have a USB external hard drive that I keep all my documents etc on (had it for years)I upgraded from Vista Home to & Home Premium then had to upgrade recently to Professional to run my Sage. Through all these upgrades my ext. drive ran fine. Occasionally the drvie letter would change if I had something else plugged into the USB, this was always easily corected in disk management by changing the drive path.The connection on the case packed up so I had to get the drive put into a new case, now when I plug it in the drive is assigned G instead of F, I tried to change the drive letter allocation in Disk Management but it won't let me as the program still thinks I have a second ext. hard drive which is labelled F. I suspect this has happened because when the usb connection broke the drive was disconnected suddenly instead of a proper eject.How do I get Disk Management to remove the inactive drive - i can't find any obvious way - eject, delete etc are all missing when I click on tools or tasks.

View 2 Replies View Related

Hard Drive Partition: Adding Free Space Back To C Drive?

Sep 7, 2012

I installed Ubuntu on my computer a few months ago and created another partition for it on my 1TB hard drive. I didn't really care for Ubuntu so I decided to delete the partition it was on. That might have been a mistake. Well, now there's 87.68GB of free space on my hard disk that I can't use and I don't know how to add it back to my c: partition.

There was another post about this a couple years ago, but I don't understand the instructions and am not actually sure if it worked. Can someone explain how to do this, please? I'm not completely computer illiterate, but I'm not familiar with partitioning disks. It was just the one time with Ubuntu.

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved