Cloning Windows 7 Partition To External HDD W/ Mac OS Extended Format
Nov 10, 2012
I recently switched from a Mac to a PC. I cloned my system partition of my PC to my external hard disk, and I only realized later that the external HDD was in a Mac OS extended (journaled) format. I thought I would have to format that partition as NTFS and re-clone afterwards. I tried to remove that partition using Disk Utilities on my Mac but got an error message. Surprisingly, though, when I connected the external HDD to my PC, I can access that partition under My Computer, and when I open Disk Management that partition is listed as NTFS.
1) How can I tell if the cloned partition on my external HDD is ok?
2) Should I reformat it and start from scratch instead?
3) If so, should I be making an image OR a clone of my system disk (so that I can boot from my external HDD and restore my system if my internal HDD fails)?
View 1 Replies
ADVERTISEMENT
Mar 30, 2011
So I recently installed win7 to my desktop which at the time had Ubuntu as the sole OS. I wanted all my stuff from Ubuntu after win7 install so I created an NTFS partition and moved all my crap there, wipe Ubuntu and did a clean install. So after I moved all my stuff from the NTFS patition to the win7 partition I ran gparted and erased the extra drive. What I was paying attention to was that win7 installed into an extended partition. Now when I try to boot I get a 'Disk failure boot, insert system disk and press enter'. So I thought ok easy enough, no luck it can't run the repair from install disk as it can't see the drive for some reason. is there any hope for my drive? Or should I clean install? No biggie if I have too, I can run Ubuntu live and move my crap if need be, just would rather not.
View 2 Replies
View Related
Oct 25, 2009
I have 4 partitions on my notebook.
C: is Windows 7 32-bit
D: is Vista 32-bit
E: is Windows 7 64-bit
F: is Data.
I now want to get rid of the Vista partition and give its sectors to the Windows 7 64-bit.
I tried shrinking the Vista partiton, but the extend option is greyed out for Windows 7 64-bit.
How do I remove Vista and have it deleted from the boot manager setup?
Then how do I extend the Windows 7 64-bit into the, now empty, Vista partition?
View 9 Replies
View Related
Dec 24, 2009
How can i create an extended partition using Windows 7 and how can i add logical drives to it?
View 1 Replies
View Related
Jun 30, 2012
Is it possible to install windows XP, Vista, or Seven on an extended partition? I have a partitioned up hard drive for my main boot OS (linux fedora 17) and i am trying to find a solution so i can play video games and every solution ive tried from Virtual Machines to Wine just dont work for me and i want to install a version of windows to play my video games and the only space i have free is at the end of one of my drives as an extended partition.
View 3 Replies
View Related
Jan 23, 2011
I want to add a new internal 1TB HDD with 2 partitions: 100GB for scratch disk space for Adobe CS, Autocad etc. and the remaining 900GB for User Data. My OS/Apps is on a 90GB SSD with no partitions. I have read the tutorial on creating a new partition but several questions remain unanswered..
1. should both the "S" partition ("S"cratch space) and "U" partition (User Data) be extended partitions, or should the "S" partition be Primary? If I desired to direct temp files here and possibly a 2nd pagefile...would that dictate primary or extended type? Is it OK to perform all these functions on this partition (scratch space, temp, pagefile?).
2. I want the "S" scratch disk partition to be on the outer edge of the drive so that it is the fastest. Do I create this partition 1st or 2nd?
3. Since I'm not installing an OS on this HDD, the 100MB "recovery" partition will not be created on this one? Would it be advantageous to have such a partition if the other SDD with OS/Apps fails?
4. Does the tutorial here still the correct steps for what I want to do?Partition or Volume - Create New
View 4 Replies
View Related
Jan 15, 2013
i've been asked to set up 6 brand new Dell laptops bought for my software engineers in the industy - i have been given a 7th Dell laptop same as the other 6 which has had all the required software needed by our engineers for the machinery programing process installed on it - i've also been given a 1TB western Digital {USB connected} external hard drive for cloning the software and transfering it on to the other laptops, so this afternoon i cloned the 7th laptop with all the software on it using system back up - creating a system image file on the external hard drive, but when it came to transfering this image on to the other laptops, i thought i'd beable to restore {set up the C: drive} the new laptop from the file path E: {the external hard drive path} but it doesn't have the option {E: drive or USB input or external drive} only system restore/back up disk or network path, i can't use the network path as the company has access/permission,firewall blockers that basically stop our engineers laptops from working on customers sites when online, which kind of stops any work from happening, and is why the company.
View 6 Replies
View Related
Jan 7, 2012
I installed a new ssd drive and cloned my c drive onto it. It also cloned my system reserved partion [about 25 megabytes].I then, at a later date, cloned my c drive [now my new ssd drive] again back to my old primary drive so that i have an up to date copy of my primary drive. But it also cloned my system reserved partion. Can i delete some of these system reserved partions. I now have 3 of them! It makes my computer look very untidy. What ones should i leave or do i need to leave them all?
View 1 Replies
View Related
Nov 24, 2009
Windows 7 is coming pre-installed on my new PC from Dell. It has two 500GB HDDs.
I want to partition the first drive into just a couple of partitions. I guess I will have to shrink the main partition to about 100GB for the OS and apps.
But my question is: that partition with the OS and apps will be a 'primary' one...what will my next couple of partitions be? Logical? Extended?
I'm not sure how to decide what type of partitions to have.
View 7 Replies
View Related
Nov 14, 2009
Just new here, i am right now installing my new-built PC with Windows 7 Enterprise.
Unfortunately, i have already some problems. My hard drive is a 1 TB WD and on setup i made a primary partition of 50 GB for Windows 7. I thought to partition the rest afterwards and there is the problem. The installation went without any problem, but in diskmanager i cannot see the option as i saw in XP to choose between a primary or an extended partition.
I wanted to make a large extended partition of the unallocated space and then divide it into some logical drives to hold my programs, pictures & films,... etc. As Windows 7 makes primary partition always i am limited to 4 partitions and that is not enough.
View 2 Replies
View Related
Jan 14, 2010
i've purchased a seagate 1TB external hard drive and need to format it in FAT32 format.
View 9 Replies
View Related
Jun 6, 2011
Table top, Acer brand, Aspire M5700HDD: 500GBPart: 1. Hidden partition, 20GB, eRecovery2.Partition C partitioned by Acer, 240GB, OS3. Partition D partitioned by Acer, 240GBI plan to format both C and D partitions and make 4 partitions.So, check with Acer firstAcer's reply is confusing, saying that the hidden partition will be damaged if format C partition
View 9 Replies
View Related
Aug 13, 2012
I have a generic System 7 64 bit system with a 1 TB SATA drive. It has one hard drive which I have partitioned into 4 partitions, with C: being where I put all the system software. The board has mulitple SATA ports.Change considered: cloning the C: partition onto a new SSD so that I can get the performance boost of an SSD. There are some heat problems with existing hard drive so I probably need to change it out, so I would also like to clone the D:, E:, and F: partitions to a new hard drive.I have cloned a single physical drive to another physical drive, and the software (Ghost, or the like) usually handles it ok, so that all I need to do is adjust some partition sizes, and then disconnect the old hard drive and everyting is good. This includes cloning a single hard drive with multiple partitions to being cloned to a new single hard drive with identical numbers of partitions.Compared to my prior experience, is there something different about cloning one partition only vs cloning the whole drive. My proposed plan is:
1) Install SSD
2) clone C: to SSD only
3) clone D: E: F: of old drive to new drive.
4) remove old drive.
View 5 Replies
View Related
May 9, 2011
I created a 20gb partition on my external hard drive and no longer require the partition. It is currently unallocated space so I want to format it into NFTS. Using computer management the partition was selected and and I went through the steps to format but i keep on getting an error message saying there is not enough space on the disk to complete this operation.
View 1 Replies
View Related
Jul 16, 2011
I have two windows on my system, one in drive C and another in drive D. Both are windows 7. Now, I want to format the partition D but I cannot. could u please help me in this issue? I want just keep the windows in drive C and format all thing of drive D...
View 3 Replies
View Related
May 21, 2012
I am trying to format my 1.5Tb Samsung external HDD using Windows XP X64.I tried using port E and F.Formatting goes on for upto 7 hours,progress bar gets to end and I get the 'can't complete format' message.I am a computing dummy, how to get this done correctly and successfuly.
View 6 Replies
View Related
Mar 23, 2012
750 Samsung portable device. Problems seems to sort itself out eventually but it keeps firing up prompts to format the drive before I can use it. First time it happened I had to unplug it, restarted and then it was OK. It just did it again and then again when I restarted, took a minute or two but eventually it read the drive and it was ok. Why is this happening and what can I do to stop it? Might it be a power issue? I have the device connected via a USB 2.0 port, through an extension lead and then through a 4 way splitter. I have had problems with this splitter before I think, but not with the small connector. Maybe I can try connecting it through one of the other ports and see if it still has the same problem.
View 8 Replies
View Related
Jan 27, 2013
I recently backed up about 500gb of recent work onto an external drive so I could clean my PC inside and out. I gave it a clean install of windows 7 and when it comes time to get my work of my external, the drive cannot be recognized and requires a reformat.It was working perfectly fine and I surely did not format the drive into a RAW file system. I tried plugging into my laptop running win8 and still the very same issue. I plugged it into a mac running the lastest mac os 10 and I can browse all my folders and see the files but I can't move/copy or open them. But at least I know all is not lost.
View 6 Replies
View Related
May 27, 2012
why does Windows 7 want always format a truecrypt partition? i have an external hard disk 2 partition ntfs file system 1 was encrypted with truecrypt 32bit under Windows 7 32bit everytime , Windows 7 pop up with a request to format the drive.i don't auto mount the partition, i mount the partition always when i need so when the partition is not mounted , Windows 7 asks me to format.
View 2 Replies
View Related
Jul 17, 2011
Recently, after trying to format a memory stick I have encountered some problems:
- After right clicking on the stick or on a partition and selecting format, nothing happens. Literally nothing, its like I didn't press it.
- Another a bit troubling issue, is that when I tried to scan with my antivirus, I get that the scan engine cant initialize, although the whole software works. I am using Bitdefender Internet Security 2010
I am currently scanning with ESET Online Scanned for viruses, to be sure I don't have a nasty one, but from what I see is that other then that, everything works fine. Finished the scan, with no issues. Also the troubling memory stick, i went to another PC, and was virus free and also was easily formatted. So i am afraid is something related to the system or something like that.
View 5 Replies
View Related
Oct 4, 2012
but i was wondering do i delete the partition and then create a new partition or do i format it? (see picture)
View 6 Replies
View Related
Nov 5, 2011
I had to install windows 7 in my pc.....bt while installing a message always shows up saying "windows could not format a partition on disk 0.an error occured while preparing the partition for installation.error code 0x80070057"my hard drive is samsung HD502H(500GB) and have a partition of 93.1GB.
View 1 Replies
View Related
Dec 20, 2012
I have a new Dell with windows 7 and I have three external hard drives which I use on three other machines with xp pro one them. This machine will not open these drives and demands a format. They work perfect on my other machines
View 2 Replies
View Related
Jun 21, 2011
I am on my grandparents desktop, and they recently had me dual boot Windows 7 onto their Windows XP machine, and they now no longer need XP anymore. The XP partition is listed as a System, Healthy, Active, Primary partition. The 7 partition is listed as a Boot, Active, Healthy, Logical partition. How can I delete/format the XP partition and make the Windows 7 a primary partition? I have tried by using Disk Manager, and Eauseus Partition Manager, but it won't let me convert it to primary, or format the XP partition.
View 14 Replies
View Related
Jul 6, 2011
I just got a new hard drive and a dvd drive because both my hard drive and dvd drive both died. So I got it all set up in my comp and everything seemed to be going fine but I keep getting the windows could not format a partition on disk 0 The error occurred while preparing the installation. error code 0x80070057.
View 5 Replies
View Related
Aug 4, 2011
I've just purchased a new desktop Extra Value Desktop PC - Desktops | Ebuyer.com along with an OEM Windows 7 64bit. This is a fresh install on a brand new PC. Every time I get the same error message "windows could not format the partition on disk 0. The error occurred while preparing the partition selected for installation. Error code: 0x80070057". I've just removing RAM and still same problem. Even tried install XP and after 3 hours fomating the drive it it came up with this error ""Setup was unable to format the partition. The disk may be damaged."
View 9 Replies
View Related
Jul 15, 2010
I am trying to do a clean install of windows 7 onto my laptop, and I keep getting the error, "windows could not format a partition on disk 0. The error occurred while preparing the partition selected for installation. Error code: 0x80070057" . I have reformatted the hard drive and tried clicking next from there. This is the 64-bit version of windows 7
View 9 Replies
View Related
Dec 25, 2012
Yesterday evening I was having computer problems so I decided to do a clean reinstall of WIndows 7. I cleaned out some partitions and then tried to put WIndows 7 on the fresh partition. The process began and then I got a mesage saying that Windows cold not format a partition on disk 0. This error occured while preparing the partition selected for installtin. Error code 0x80070057I also get a message when I restart the computer saying ¨Missing Operaing system¨ I´m guessing that that means I cant log in to fix this problem
View 3 Replies
View Related
Sep 10, 2011
I have a problem someone here might be able to throw some light on.
I am trying to format an external 80gb hdd in fat 32, and it keeps stopping saying "hdd too large" i have tried different ways with no joy
View 8 Replies
View Related
Apr 10, 2011
I just got a new Western Digital 2TB external hard drive for backup, but I want to partition it in order for it to be more effective(or so I've heard). I know that in Windows XP when you format a new hard drive you can make partitions with extreme ease. How can I do that in Windows 7?
View 1 Replies
View Related
Mar 22, 2011
A couple of weeks ago a storm blew through and knocked out my power for a moment, then it came back on. Within a few seconds, another wind gust and it ripped our power lines down.Got power back a few days later, and have been busy trying to fix this on my own but to no avail.
My computer booted into system recovery tools, start up problem fixes etc. none of them worked, leading to the decision to format my SSD and try to reinstall windows 7. I get to "windows is copying files" and it stays stuck at 0% for about a minute or two, then I get "Windows could not format a partition on disk 1. The error occured while preparing the partition selected for installation. Error code: 0x8007057.
I concluded that I should try deleting the partition and creating a new one. That however, got me this message:Failed to delete the selected partition. [Error: 0x8007017].So I decided to try and format the drive, to this result:
Failed to format the selected partition. [Error: 0x8007057].
Same result as when I was trying to install. Puzzles me! I've still got a lot to learn.I've tried removing unnecessary RAM, same results.Having the same problem with a Vista 64 bit install disk, and have tried to install on my SSD and HDD with no differences.
System:
ASUS Sabertooth X58 MoBo
Core i7 920
6gb DDR3 1600mhz corsair RAM
RiDATA 32GB SSD (OS drive)
1TB Western Digital HDD
and one other 500GB HDD (I forget the brand)
View 5 Replies
View Related
