How To Create An Extended Partition With Logical Drives ?
Nov 14, 2009
Just new here, i am right now installing my new-built PC with Windows 7 Enterprise.
Unfortunately, i have already some problems. My hard drive is a 1 TB WD and on setup i made a primary partition of 50 GB for Windows 7. I thought to partition the rest afterwards and there is the problem. The installation went without any problem, but in diskmanager i cannot see the option as i saw in XP to choose between a primary or an extended partition.
I wanted to make a large extended partition of the unallocated space and then divide it into some logical drives to hold my programs, pictures & films,... etc. As Windows 7 makes primary partition always i am limited to 4 partitions and that is not enough.
Windows 7 is coming pre-installed on my new PC from Dell. It has two 500GB HDDs.
I want to partition the first drive into just a couple of partitions. I guess I will have to shrink the main partition to about 100GB for the OS and apps.
But my question is: that partition with the OS and apps will be a 'primary' one...what will my next couple of partitions be? Logical? Extended?
I'm not sure how to decide what type of partitions to have.
I had my friend Dell Laptop. He want me to create a two extra partitions in existing primary partition which is C:The HDD is 1TB in size.One hour ago I had used Dell data backup program and created recovery discs and then formatted the Laptop to factory default. I thought before formatting it will give me options to create a partitions but it did not had any option.
Earlier in the year I bought myself an Apple Mac Mini. I knew I could run Windows on it and soon installed Windows 7. For various reasons I'd like to run 2 copies of Windows, plus OS-X, plus a shared FAT32 partition which all OSs can see and write to. You wouldn't think that would be so difficult..!Unfortunately, Macs use the GPT disk partitioning scheme (which doesn't support extended or logical volumes), Instead, it can support up to 128 primary partitions. However, these get presented to Windows as if they were MBR partitions. GPT also needs an EFI partition, giving me 5 partitions minimum for what I need. Windows backup & partitioning tools (e.g. Paragon's Drive Backup) mistakenly see this as an MBR drive with 5 primary partitions and subsequently refuse to work.Fortunately, Mac OS-X doesn't actually need to be on a GPT drive. It'll run perfectly well from an MBR drive which should in theory save me one partition (the EFI partition). In practice however, installing Windows 7 on an MBR drive causes it to create a 100MB System partition. This leaves me needing 5 partitions again which gets me right back to square one!Is there any way to configure Windows 7 so that it doesn't need that 100MB partition?
I've bought this Sragate 500GB (Recognized as 465GB) HDD and moved everyhing into it. Partitioned it during 7 installation and here are my partitions all in NTFS:
Primary (101MB) - NTFS - Created during Windows 7 setup - I'll delete when I'm ready to install a new OS
I installed my Windows 7 and winxp in the 2nd and 3rd primary and I switch between these two by activaving the appropriate one. when I'm in XP and activate 75GB primart to boot in Windows 7 something strange happens:
Except the 1st logical drive, any other logical drive I have after it dissapears and turns into unpartitioned space. and it seems to be a bug of windows disk management tool or limitation in winxp. the point is that there's no such a problem when I do the same in Windows 7 exactly.
After clean installing Windows 7 to second partition dual booting with XP, I notice that the Windows 7 paritition is marked "logical drive" in Disk Management. XP is marked primary active.
Are there any reasons why an OS should not be installed to a logical drive?
I have Windows 7 SP1 and I should only move the users profiles (without the default profile) and the public folder in a NTFS logical partition.
I should modify the ACLs of the root directory () of the logical partition to still have a coherent and stable system or not? If so, how should I modify these ACLs?
So I recently installed win7 to my desktop which at the time had Ubuntu as the sole OS. I wanted all my stuff from Ubuntu after win7 install so I created an NTFS partition and moved all my crap there, wipe Ubuntu and did a clean install. So after I moved all my stuff from the NTFS patition to the win7 partition I ran gparted and erased the extra drive. What I was paying attention to was that win7 installed into an extended partition. Now when I try to boot I get a 'Disk failure boot, insert system disk and press enter'. So I thought ok easy enough, no luck it can't run the repair from install disk as it can't see the drive for some reason. is there any hope for my drive? Or should I clean install? No biggie if I have too, I can run Ubuntu live and move my crap if need be, just would rather not.
Is it possible to install windows XP, Vista, or Seven on an extended partition? I have a partitioned up hard drive for my main boot OS (linux fedora 17) and i am trying to find a solution so i can play video games and every solution ive tried from Virtual Machines to Wine just dont work for me and i want to install a version of windows to play my video games and the only space i have free is at the end of one of my drives as an extended partition.
I want to add a new internal 1TB HDD with 2 partitions: 100GB for scratch disk space for Adobe CS, Autocad etc. and the remaining 900GB for User Data. My OS/Apps is on a 90GB SSD with no partitions. I have read the tutorial on creating a new partition but several questions remain unanswered..
1. should both the "S" partition ("S"cratch space) and "U" partition (User Data) be extended partitions, or should the "S" partition be Primary? If I desired to direct temp files here and possibly a 2nd pagefile...would that dictate primary or extended type? Is it OK to perform all these functions on this partition (scratch space, temp, pagefile?).
2. I want the "S" scratch disk partition to be on the outer edge of the drive so that it is the fastest. Do I create this partition 1st or 2nd?
3. Since I'm not installing an OS on this HDD, the 100MB "recovery" partition will not be created on this one? Would it be advantageous to have such a partition if the other SDD with OS/Apps fails?
4. Does the tutorial here still the correct steps for what I want to do?Partition or Volume - Create New
I recently switched from a Mac to a PC. I cloned my system partition of my PC to my external hard disk, and I only realized later that the external HDD was in a Mac OS extended (journaled) format. I thought I would have to format that partition as NTFS and re-clone afterwards. I tried to remove that partition using Disk Utilities on my Mac but got an error message. Surprisingly, though, when I connected the external HDD to my PC, I can access that partition under My Computer, and when I open Disk Management that partition is listed as NTFS.
1) How can I tell if the cloned partition on my external HDD is ok? 2) Should I reformat it and start from scratch instead? 3) If so, should I be making an image OR a clone of my system disk (so that I can boot from my external HDD and restore my system if my internal HDD fails)?
I'm using Compaq Presario CQ40-627TUMy Laptop SpecIntel Dual Core Processor T4400 (2.2GHz, 80Mhz FSB,1 MB L2 Cache)- 2048MB 800MHz DDR2 Memory- 320GB 7200rpm Hard Disk Drive- 14.1' TFT WXGA High-Definition widescreen LCD panel with brightviewtechnologynd i'm using windows 7 Ultimate on boot system partition C, dual boot with linux mint. which mean i got four partition. one for linux mint. one for its swap space. one for windows 7. one for my data storage(movies,drivers,mp3,picture and etc).last few days i try to resize my C partition (120gb) to make it smaller to gain some unallocated spaces and resize the D partition because my D (almost 100gb) (ntfs/primary/data storage) almost full. i use easeus partition master v5.01.
After done resizing and restart i can't see any D partition. so i was worried that my data will disappeared. i try to look for it but there is no Drive D even on the easeus or diskpart. the only drive appears was C Drive.i remove my Linux Mint and its swap (60gb) and thinking that i could get some more free space and do some cmd prompt windows 7 repair fixmbr thing to remove the grub. then i use partition recovery to transfer those missing data from partition D to C Drive. (appears as unformatted)i try to use partition wizard home to resize it back to 300gb. and it works. but i cant make a partition. it will disappear just like that.i also try to use diskpart,command prompt diskpard, and paragon. but also not working. the C drive was shrink but theres no unallocated space and no D drive (the new create partition). i try logical partition,primary,ntfs and fat but also not working. even the unallocated space also gone. i use almost 4 3rd party partitioning software but still got no luck with it.example:i divide 300gb into 2 partition which exist the C partition 150Gb but the other one gone. i wish theres other way than format. i also done many time. doing check disk, partition table doctor, searching for bad sector. but no errors with my hdd.
I have my HP Laptop which came with Windows Vista as the OS. I want to upgrade to Windows 7 so I bought Windows 7 from my local store.I entered the disc and did boot from CD. It reached to the page where it shows the disk partition. I deleted the partitions and created new one. However, whenever I create the partition, it creates a primary one and gives me error saying Setup was unable to create a new system partition or locate an existing system partition.
A friend has asked me to install Widows 7 on a friends laptop which has XP. The laptop doesn't have a DVD drive (no drive at all) so I've had to stick the installer on a USB stick from disc using a program.The USB boots up fine on the laptop, just like a disc. I formatted 2 partitions (same drive) and tried to install windows 7 but I get this error:"setup was unable to create a new system partition or locate an existing partition"So now, I have someone else's laptop with no OS. The owner is a 70 year old computer illiterate man.i'm planning on trying to install Vista instead and if successful, upgrade to 7. I would have upgraded in the 1st place, but P can't be directly upgraded to 7.
I am trying to map to a network drive and I cannot, this is am hp laptop running Win 7 32bit ultimate, if I map to \servernamesharename, cannot map, I cannot even browse to select the servername, I can ping the two servers I have, I also have the local account in the laptop in the two servers which are still win nt 4.0 servers that only acts as storage servers, but if map using \serverIPSharename, then I can map to it. Is there any security settings that I need to change? I have others computers running win 7 6bit proff, and never had any issues like this.
I have a copy of windows 7 from a friend. (USB, possibly enterprise)It runs well, is official and can be re installed and is verified through the Microsoft site, so the media doesn't seem to be a problem.I was able to install Win7 Ult x64 on my WinVista HomePrem x86, but I went back through to clean the hard drive (it was full, I didn't format before) and after low level formatting I cannot reinstall the OS. The harddrives are completely empty, and I get stuck at "Setup was unable to create a new system partition or locate an existing system partition," after hitting next when you are selecting the HD partition to install on. I tried a couple of things already:
-Installing on another harddrive -Formatting using Hiren's bootcd -Using a hard drive with XP installed to see if it is an upgrade and not a full version (no luck, still wouldn't install) -diskpart > list disk > select disk 0 > list partition > active \ in cmd..I have three hard drives attached to the computer right now, they can't all be broken. T.T
I want to create a new partition to load Linux on it (on my Windows 7 system). Now I currently have a C-drive(Windows), a D-Drive(80GB) and an E-Drive(400MB). Now how do I create a new partition for Linux, without using the windows cd and booting from it? Can I use Virtual Hard Disk(VHD)?
I've done a clean format to my OS . But at the partition creation part , some of my hdd couldn't be used to make a partition of it . I'll give you a screenshot to explain my problem better s you can see after the process tells me that creation of a new partition has been completed i end up seeing this error
I've been trying to set up a 2nd partition to put a 32bit windows 7 on, but I can't.But it's not letting me edit how much I want to shrink my drive by. Even if I manually put in a number, the "Shrink" button is gray and I cannot click on it.
I have this Toshiba 640Gb HDD. I partitioned it into three logical drives. When I inserted the hdd in my xp, one drive cannot be read. Later when I used again the hdd in 7, it says that one of the drives needs to be formatted (the one that can't be read by xp). I did so but I noticed that the drive letter changed. Series of switching between the two OS, the drive's letter continues to change upon formatting. Then to arrange again the drive letters in their alpha list, I used Easeus Partition Master to change the letters of the partitions back as F, G, and H. After the process, when I inserted the hdd, it took significant amount of time for the drive to be read.
Is there any way to revert and restore the drive letters of the system? I've tried to restore from backup but to no avail.
i am using lenovo y510 laptop which comes with an hidden OEM partition which can be used for "one key recovery" process to restore original settings or to format the pc without any cd or dvd or usb and it is a very nice feature a laptop can have...
now my question is...
my laptop has vista home basic in its OEM partition...is there anyway to change it to Windows 7...so that it can format Windows 7 whenever i press recovery key ?
when I'm formatting a HDD that is completely clean (no partitions or volumes) should I create a partition or some kind of volume to format the drive, which will format the whole drive, I don't know which one to go with.
If partition, what kind, primary extended etc. If volume, what kind of volume RAID, stripe etc
I have an odd problem - I have 2 drives - one SATA one IDE on the motherboard to choose from. Both blank. The install program sees them, apparently can partition them (let's me into advanced options), but when i select either one to install to, gives an error that it cannot create the partition.
i got a new hp laptop which already as 3 partitions. C:, Recovery (D) and Local Disk (Q). Since iam very new, i want to know can i take a Backup of the Recovery(D) in DVDs and restore the space (capacity) to C drive? Or is it necessary to have it in the system? When i try to make a partition from C drive, the same old prob of getting Dynamic disk conversion comes up...Now dat i got back all the unallocated partition back to C, how do i create another new partition? I tried checking with other posts but was unable to understand..
kay I am trying to make bootable USB so I can reinstall my Windows 7, but when I get to the step to create partition primary, it tells me there is insufficient space to do so. What's up with that? I really need to get my laptop back working before the 14th, because I am going up to my grandparents' house for the summer and would like to bring my laptop with me. I also don't want them to find out I broke it so...heh.Also, I've tried burning the ISO to a 4GB DVD disk with ImgBurn but every disk I do gives me an error, and I only have 3 DVDs left and I don't want to try again because I don't want to waste them. I actually just went out to buy this USB so I'm really upset that I'm having issues with it
