Is it possible to install windows XP, Vista, or Seven on an extended partition? I have a partitioned up hard drive for my main boot OS (linux fedora 17) and i am trying to find a solution so i can play video games and every solution ive tried from Virtual Machines to Wine just dont work for me and i want to install a version of windows to play my video games and the only space i have free is at the end of one of my drives as an extended partition.
So I recently installed win7 to my desktop which at the time had Ubuntu as the sole OS. I wanted all my stuff from Ubuntu after win7 install so I created an NTFS partition and moved all my crap there, wipe Ubuntu and did a clean install. So after I moved all my stuff from the NTFS patition to the win7 partition I ran gparted and erased the extra drive. What I was paying attention to was that win7 installed into an extended partition. Now when I try to boot I get a 'Disk failure boot, insert system disk and press enter'. So I thought ok easy enough, no luck it can't run the repair from install disk as it can't see the drive for some reason. is there any hope for my drive? Or should I clean install? No biggie if I have too, I can run Ubuntu live and move my crap if need be, just would rather not.
I want to add a new internal 1TB HDD with 2 partitions: 100GB for scratch disk space for Adobe CS, Autocad etc. and the remaining 900GB for User Data. My OS/Apps is on a 90GB SSD with no partitions. I have read the tutorial on creating a new partition but several questions remain unanswered..
1. should both the "S" partition ("S"cratch space) and "U" partition (User Data) be extended partitions, or should the "S" partition be Primary? If I desired to direct temp files here and possibly a 2nd pagefile...would that dictate primary or extended type? Is it OK to perform all these functions on this partition (scratch space, temp, pagefile?).
2. I want the "S" scratch disk partition to be on the outer edge of the drive so that it is the fastest. Do I create this partition 1st or 2nd?
3. Since I'm not installing an OS on this HDD, the 100MB "recovery" partition will not be created on this one? Would it be advantageous to have such a partition if the other SDD with OS/Apps fails?
4. Does the tutorial here still the correct steps for what I want to do?Partition or Volume - Create New
Windows 7 is coming pre-installed on my new PC from Dell. It has two 500GB HDDs.
I want to partition the first drive into just a couple of partitions. I guess I will have to shrink the main partition to about 100GB for the OS and apps.
But my question is: that partition with the OS and apps will be a 'primary' one...what will my next couple of partitions be? Logical? Extended?
I'm not sure how to decide what type of partitions to have.
Just new here, i am right now installing my new-built PC with Windows 7 Enterprise.
Unfortunately, i have already some problems. My hard drive is a 1 TB WD and on setup i made a primary partition of 50 GB for Windows 7. I thought to partition the rest afterwards and there is the problem. The installation went without any problem, but in diskmanager i cannot see the option as i saw in XP to choose between a primary or an extended partition.
I wanted to make a large extended partition of the unallocated space and then divide it into some logical drives to hold my programs, pictures & films,... etc. As Windows 7 makes primary partition always i am limited to 4 partitions and that is not enough.
I recently switched from a Mac to a PC. I cloned my system partition of my PC to my external hard disk, and I only realized later that the external HDD was in a Mac OS extended (journaled) format. I thought I would have to format that partition as NTFS and re-clone afterwards. I tried to remove that partition using Disk Utilities on my Mac but got an error message. Surprisingly, though, when I connected the external HDD to my PC, I can access that partition under My Computer, and when I open Disk Management that partition is listed as NTFS.
1) How can I tell if the cloned partition on my external HDD is ok? 2) Should I reformat it and start from scratch instead? 3) If so, should I be making an image OR a clone of my system disk (so that I can boot from my external HDD and restore my system if my internal HDD fails)?
I have started the installation process of windows 7 on a clean 1 TB hard drive. In order to ensure expediency of the read time of my primary drive, I choose the custom installation. When I did I partioned the drive as 250GB & 700GB. Hoever it also created a 100MB system partition on its own. It never did this in Vista. Is it suppose to do that?
I have my HP Laptop which came with Windows Vista as the OS. I want to upgrade to Windows 7 so I bought Windows 7 from my local store.I entered the disc and did boot from CD. It reached to the page where it shows the disk partition. I deleted the partitions and created new one. However, whenever I create the partition, it creates a primary one and gives me error saying Setup was unable to create a new system partition or locate an existing system partition.
I am helping a friend out with his new HP that he just bought. It comes with a 1TB hard drive and windows 7 home 64 bit. Since it is an HP and the OS and various HP programs are loaded on it already, is there a way to partition the HDD now so that my friend can keep part of the drive isolated for programs and the OS and use the rest for files?
I have partitioned my main hdd into 2, one is for system install only and the other has programs / game installations. I want to put a fresh install on my system partition but wonder how difficult it will be to use the programs from the other partition, eg. Will i have any registry problems if i try to run the programs straight away? Some of these programs are hefty in size...
i have a new lap tab with windows 7 home premium 64-bit here i have a problem for installation pro e so i want have xp as a partition with out loosing windows 7 home premium.
Okay so i clicked custom install and it shows all my drivers. I did a partition on my C drive before doing the installation and when i try to install windows 8 and i want to choose the empty partition unallocated it's not on the screen options?
It only shows C, my Recover, System G, and HP Tools F How do i make my unallocated show in my windows 8 installation so that i can choose it
My boot menu originally consists of Vista (C:) and recovery partition (D:). To install Windows 7, I shrank C and made a separate partition (W:)
Now I have 3 partitions: Vista (C:), New Simple Volume (W:), Recovery (D:).
I installed Windows 7 to the (W:), and it reboots a few times during installation. My situation goes as follows:
Initial installation---Reboot (1 of 3)---bypasses the boot menu and continues installation---Reboot (2 of 3)---boot menu shows up and I can choose to continue the installation of Windows 7, or go to Vista. When I choose Windows 7, it finishes installation---Reboot (3 of 3)---No boot menu is shown. Computer boots into recovery partition.
Why is this happening? Repairing Windows 7 or Vista using recovery partition doesn't help either. It basically just forms a loop by booting to the recovery every time.
Interestingly, the only way I can start Vista again is by reinstalling Windows 7 and wait until the boot menu screen show up after the reboot (2 of 3).
1.I start installing a fresh copy of Win 7.2.At the point of installation which concerns partitions I delete my 2 old ones (had 2 partitions on 1 HDD) and create 2 new ones.3.I continue installation on the smaller partition (just for the OS purpose) 4.All done perfectly with installation.5.When I go to My Computer I am only showing drive C: (the smaller OS partition) and I don't see the second partition at all.
I have been given the challenge to make a way to install Windows without any installation media and without having to even touch the computer while it's installing. So far I've made a .wim image with the help of this guide and I've made an Autounattend.xml file with thI put the install.wim image in the sources directory on a flash drive and the Autounattend.xml file in the root of the flash drive, and it does exactly what I want it to - all except it's not on a partition. So I move it to a partition and add a boot entry using EasyBCD. It boots fine, but it acts like the Autounattend.xml file isn't even there. So right now I have the choice of hands free installation with media, or manual installation without media. My main question is why the Autounattend.xml file isn't working when I boot the same media from a partition
After purchasing my new Student Version of Windows 7 Professional I was keen to do a full system format, and start fresh. I no longer had a need for the Dell Recovery Partition which contained Vista (and a decent amount of bloatware), so I removed all partitions from my disk to start with a blank 180GB HDD.
I thought to myself, if I am going to start fresh I might as well do things right and mimic Dell’s setup with a recovery partition of my own. Now to be fair, this isn’t an extremely wild idea as there are plenty of manufacturers and software companies who provide such solutions very simple and easy. Everyone knows that Norton Ghost is fantastic, and Acronis TrueImage is right there with them. Of course you can simply run-up Imagex along with WinPE and sysprep a WIM to re-image your HDD at anytime for a free solution.
However, all these solutions require that you have some sort of recovery media for boot time operation, and the Imagex solution isn’t for the faint of heart. Now I do a lot of travel, and I wanted a solution that didn’t require me to look after a bootable DVD or USB stick, and because I am working with a laptop I didn’t have second disk which I could boot from via BIOS settings. My recovery solution had to be a Primary Partition on my only HDD with boot time options (in case my system is completely rooted.)
This turned out to be quite the challenge, as Windows 7 / Vista no longer support the simple easy boot.ini file that allows you to manually adjust boot time parameters. Instead Windows 7 / Vista have moved onto some fancy form of bootsect / BCD (Boot Configuration Data) which is very difficult to edit manually. Thankfully all of my hard work paid off and I now have a self sufficient system with all the diagnostics and re-imaging tools I could ever need. And thanks to Windows 7’s new Backup and Restore options, I was also able to include a system image which contained all of my settings and applications so that I don’t have to sit through 10 hours of Windows Update again.
What I ended up with is a Primary partition on my HDD that is a full and complete bootable version of the Windows 7 installation media. When I choose this partition at boot time it is exactly as if I have inserted the Windows 7 Install DVD into my disk drive! I can utilise all of the tools in the Windows Recovery Console (which includes the option to restore from a previously created system image), or I can simply re-install Windows 7 from scratch - without affecting my restore partition or boot menu variables!
Having obtained my new 80GB Intel X-25M SSD I will of course be using it as the Windows Partition in my new installation after I receive my release copy on 22nd October.
However, I was wondering on the best way to partition the remainder of my storage to maximise performance, and particularly where I place the swap file, applications and data.
The Maxtor was the original HD that came with the PC and is approaching 4 years old. I obviously don't want to use it for anything that affects performance so the obvious usage is as a backup volume. However, I'm not sure of the wisdom of this given it is the oldest drive!
So, my current plan is as follows:Boot & Windows Partition, including application installation: All 74.5GB of the available SSD Swap File: A seperate 10GB partition of the WD drive Data: The remainder of the WD Drive (Can you get Windows 7 to move the location of the User Folders such as 'Documents', 'Downloads' etc. to a partition other than the system drive? If so how?) Backup: The Maxtor Drive Even though I am getting a full version of Win 7 by virtue of the UK Pre-Order offer, I won't be maintaining my Vista install so no need for a partition for that (good riddance!).
It is important that the swap file is not on the SSD I understand to reduce the number of write cycles and maintain its lifespan.
Does this sound like a good plan to maximise performance? Certainly using the seperate swap file seems to work very well in my RC test installation.
I am installing windows on a new computer, and was watching the series of videos newegg has on the matter. I got to the third episode - [URL] and noticed that at about 12:30 into the video, he mentions creating a maximum size partition on the drive before installing windows. What purpose does this serve? Does it merely allocate the full size of the drive strictly to windows, so nothing else can use it?
I installed Windows 7 on a formerly Vista Business computer. Now I would like to know, does a clean installation of Windows 7 automatically create a recovery partition or backup? Or do I need to format the Recovery Drive D(from the Vista installation) and make a backup on that drive (D)?
So, I have a disk with Windows 7 installed on the 3rd partition of that disk. I want to move that installation to the first partition of the disk.Repartitioning and boot settings aside, is there a way to do that? (besides using sysprep)Last time I tried that, windows would load slowly and after ''Preparing your desktop'' screen it would just show the one-color desktop, no icons, no explorer shell loaded.Alt,Ctrl,delete works, for running ''explorer'' from task manager, but computer, control panel or anything system-related does not open, instead it pops up an error window with, (e.x.)''{ED7BA470-8E54-465E-825C-99712043E01C}'' not found.
No install disks, no manual just letter telling me to protect customer data entire drive was wiped clean including Recovery partition. Checked disk management it shows all 4 primary partitions used: 200mb (boot), 169gb (C drive), 281gb (D drive), 16.5gb Recovery partition. I tried F9 when booting (nothing) just boots into OS. This setup is completely useless to me. Called Asus ($50.) for install disk they said call Microsoft, call Microsoft ($99. new disk) they said call Asus, I've already paid for Win 7 once and i'll be damned if I pay for it again. Typical corporation bullshit.What I want to do is install Win 7 on 1st part, 2nd (shared NTFS part), Ubuntu on logical partitions.
I am getting a error during reinstallation of win 7 which is "setup was unable to create a new system partition or locate an existing system partition. See the setup log files for more information." I have win7 DVD for install. I have Dell xps studio 435MT/9100 desktop. I have 2 hard drives(640gb) each.
I am preparing a laptop for sale, and have carried out a fresh install of Windows (booting from recovery CD). During this process, I selected 'Custom installation'followed by the hard disk partition containing my personal data and 'Drive options (advanced)', followed by 'Delete'. Is this a secure method of erasure or should I take additional precautionary steps before selling?
I have my HP Laptop which came with Windows Vista as the OS. I want to upgrade to Windows 7 so I bought Windows 7 from my local store.I entered the disc and did boot from CD. It reached to the page where it shows the disk partition. I deleted the partitions and created new one. However, whenever I create the partition, it creates a primary one and gives me saying Setup was unable to create a new system partition or locate an existing system partition.The stupidity that I did was deleted the partition which had the Recovery Drive in it. So, now I am stuck and not able to install Vista as well as Windows 7. I am not able to boot Windows as there is no OS in my laptop now.
So I'm trying to install Windows 7 on my notebook through a USB boot but I keep getting the Setup was unable to create a new system partition or locate an existing system partition. error no matter what I try. My notebook has no CD/DVD drive so I've been using a USB flash drive boot which I created using bootcamp on my macbook pro.
Here is are screenshots of where I'm stuck, disk part and details of disk 0 (HDD):
My notebook has no OS now so I'd really like to get this fixed!
