Can Create The Logical Partition After Z: Drive
Aug 13, 2011can we create the logical partition after Z: drive?if yes then what we will be the name of that drive
View 2 Repliescan we create the logical partition after Z: drive?if yes then what we will be the name of that drive
View 2 RepliesI had my friend Dell Laptop. He want me to create a two extra partitions in existing primary partition which is C:The HDD is 1TB in size.One hour ago I had used Dell data backup program and created recovery discs and then formatted the Laptop to factory default. I thought before formatting it will give me options to create a partitions but it did not had any option.
View 6 Replies View RelatedJust new here, i am right now installing my new-built PC with Windows 7 Enterprise.
Unfortunately, i have already some problems. My hard drive is a 1 TB WD and on setup i made a primary partition of 50 GB for Windows 7. I thought to partition the rest afterwards and there is the problem. The installation went without any problem, but in diskmanager i cannot see the option as i saw in XP to choose between a primary or an extended partition.
I wanted to make a large extended partition of the unallocated space and then divide it into some logical drives to hold my programs, pictures & films,... etc. As Windows 7 makes primary partition always i am limited to 4 partitions and that is not enough.
After clean installing Windows 7 to second partition dual booting with XP, I notice that the Windows 7 paritition is marked "logical drive" in Disk Management. XP is marked primary active.
Are there any reasons why an OS should not be installed to a logical drive?
Windows 7 is coming pre-installed on my new PC from Dell. It has two 500GB HDDs.
I want to partition the first drive into just a couple of partitions. I guess I will have to shrink the main partition to about 100GB for the OS and apps.
But my question is: that partition with the OS and apps will be a 'primary' one...what will my next couple of partitions be? Logical? Extended?
I'm not sure how to decide what type of partitions to have.
Here's the scenario: I have a 1TB disk with several partitions on it.
#1: Primary partition with Vista on it.
#2: A 500GB primary partition used as storage/backup.
#3: A 50GB partition encrypted with Truecrypt, Logical drive
Now, I want to create a new Primary partition at the end of the drive, so I can install another copy of Windows 7. Notice my 500GB storage partition does not need to be Primary, but it is, and I cannot create any more Primary partitions. How can I change the storage partition to a logical drive, and have my new partition be Primary?
I have Windows 7 SP1 and I should only move the users profiles (without the default profile) and the public folder in a NTFS logical partition.
I should modify the ACLs of the root directory () of the logical partition to still have a coherent and stable system or not? If so, how should I modify these ACLs?
i want to create another partition, which can be bootable. so that i will be able to boot from ubuntu as well as windows 7....
View 3 Replies View RelatedI had bought new laptop. At that I have two drives and I locked one of them with the bitlocker and later on I just deleted that drive from disk management. Now I cannot create partition, I have more than 160 GB and system does not allow me to install a fresh copy and neither it allows me create a partition. What should I do?
View 3 Replies View Relatedhow to create windows image bootable partion in my hard drive
View 1 Replies View RelatedI wanted to know if there was any way i could make windows 7 my only operating system. Currently i have a dual boot with xp and 7. On disk management xp is listed as D: (System,Active,Primary Partition) and 7 is listed as C: (Boot,Page File,Crash Dump,Logical Drive). Is there any way to delete windows xp and have windows 7 be the primary partition without reinstalling it. I already moved all of my data from xp to windows 7. I had hoped to delete all of the data on XP and incorporate the newly unallocated space into windows 7.
View 1 Replies View RelatedI've often heard that the OS should be on a drive (logical drive) by itself so that, when it gets a problem, you can just re-install a new copy of the OS on that drive. However, isn't the OS modified when you install programs?
View 2 Replies View Relatedthis is my first time using a logical drive so my question is does a logical drive get deleted when i reinstall windows
View 9 Replies View RelatedI have 4 partitions...1 with 7, and another with Vista. I want to put XP on also, but of course I can't create another primary. I'm pretty sure I can add XP on a logical, but don't know how. Am I right, or am I out of luck with XP.
View 9 Replies View Relatedi had XP pro installed on my c drive (250gb) for a while,,,a month ago i have installed windows 7 enterprise to another hard disk (500gb) to test and get used to it while i keep my xp...so i have dual boot without any problems..
i never actually looked at it before up until today when i decided that its time to get rid of xp and keep the windows 7 as my only boot option...
as some of you have experienced before i had problems deleting the xp completely due to it being the system drive,etc..
while i was playing around i have found out that the hard drive that i have installed windows 7 has no primary partition but only a logical drive where the os is installed...while the hard drive of the xp is system drive on a primary partition...( I AM ATTACHING THE SCREEN-SHOT OF MY DISK MANAGEMENT)
so now i have a dilemma,,i need help!!
what i ultimately want to do is to get rid of XP completely and keep my 7 as my only boot.....what the heck do i need to do to accomplish that?
i have unsuccessfully tried to delete ,format the xp manually,,,i have physically removed the xp drive which resulted in no boot at all,,cause it has the boot file...
im stuck with a drive which i cannot format,,and if i do it , i cant boot windows 7...
1 thing i didnt try is to format xp drive with xp cd setup...it will result in no boot...and boot the pc with win7 cd and repair the boot sector....i don't know if it will work and i don't trust it...i dont want to lose my windows 7 setup as i have installed all my software and settings...
the fact that it is installed on a logical drive bothers me a lot! help?
My friend recently upgraded to 7 with my help. However i made the mistake of making it a logical partition. Once he deleted his old Vista partition, the system was unbootable. Now he needs a way to convert the logical partition to a primary one. I had him try use gparted live to convert it, but gparted doesnt have that option. My next idea was to run puppy off a USB and use a partition manager on that.
View 1 Replies View RelatedI currently have Win XP 32 bit on my C drive which is logical (don't know why it is). And I want to add Windows Ultimate, but I don't know where to put it. Here is a screenshot of my disk management.
Operating System
Microsoft Windows XP Pro 32 bit
Computer Model
N/A
CPU
Intel Core i3-2120 CPU @ 3.30Hz
[code]....
I'm using Compaq Presario CQ40-627TUMy Laptop SpecIntel Dual Core Processor T4400 (2.2GHz, 80Mhz FSB,1 MB L2 Cache)- 2048MB 800MHz DDR2 Memory- 320GB 7200rpm Hard Disk Drive- 14.1' TFT WXGA High-Definition widescreen LCD panel with brightviewtechnologynd i'm using windows 7 Ultimate on boot system partition C, dual boot with linux mint. which mean i got four partition. one for linux mint. one for its swap space. one for windows 7. one for my data storage(movies,drivers,mp3,picture and etc).last few days i try to resize my C partition (120gb) to make it smaller to gain some unallocated spaces and resize the D partition because my D (almost 100gb) (ntfs/primary/data storage) almost full. i use easeus partition master v5.01.
After done resizing and restart i can't see any D partition. so i was worried that my data will disappeared. i try to look for it but there is no Drive D even on the easeus or diskpart. the only drive appears was C Drive.i remove my Linux Mint and its swap (60gb) and thinking that i could get some more free space and do some cmd prompt windows 7 repair fixmbr thing to remove the grub. then i use partition recovery to transfer those missing data from partition D to C Drive. (appears as unformatted)i try to use partition wizard home to resize it back to 300gb. and it works. but i cant make a partition. it will disappear just like that.i also try to use diskpart,command prompt diskpard, and paragon. but also not working. the C drive was shrink but theres no unallocated space and no D drive (the new create partition). i try logical partition,primary,ntfs and fat but also not working. even the unallocated space also gone. i use almost 4 3rd party partitioning software but still got no luck with it.example:i divide 300gb into 2 partition which exist the C partition 150Gb but the other one gone. i wish theres other way than format. i also done many time. doing check disk, partition table doctor, searching for bad sector. but no errors with my hdd.
I had 3 drives. my windows7 was installed on drive C. And I had 130GB unallocated space. I wanted to make new drive in this space with Minitool Partition Wizard.I read in mintool site that you can only have 3 primary drives. My E Drive was not important for me and I convert it to a logical drive and made a restart.Buuuut after restart my Windows 7 wont boot. Now I have fedora 15 and I see that all my drives and files are ok.
View 1 Replies View RelatedI have my HP Laptop which came with Windows Vista as the OS. I want to upgrade to Windows 7 so I bought Windows 7 from my local store.I entered the disc and did boot from CD. It reached to the page where it shows the disk partition. I deleted the partitions and created new one. However, whenever I create the partition, it creates a primary one and gives me error saying Setup was unable to create a new system partition or locate an existing system partition.
View 9 Replies View RelatedA friend has asked me to install Widows 7 on a friends laptop which has XP. The laptop doesn't have a DVD drive (no drive at all) so I've had to stick the installer on a USB stick from disc using a program.The USB boots up fine on the laptop, just like a disc. I formatted 2 partitions (same drive) and tried to install windows 7 but I get this error:"setup was unable to create a new system partition or locate an existing partition"So now, I have someone else's laptop with no OS. The owner is a 70 year old computer illiterate man.i'm planning on trying to install Vista instead and if successful, upgrade to 7. I would have upgraded in the 1st place, but P can't be directly upgraded to 7.
View 6 Replies View RelatedI have a copy of windows 7 from a friend. (USB, possibly enterprise)It runs well, is official and can be re installed and is verified through the Microsoft site, so the media doesn't seem to be a problem.I was able to install Win7 Ult x64 on my WinVista HomePrem x86, but I went back through to clean the hard drive (it was full, I didn't format before) and after low level formatting I cannot reinstall the OS. The harddrives are completely empty, and I get stuck at "Setup was unable to create a new system partition or locate an existing system partition," after hitting next when you are selecting the HD partition to install on. I tried a couple of things already:
-Installing on another harddrive
-Formatting using Hiren's bootcd
-Using a hard drive with XP installed to see if it is an upgrade and not a full version (no luck, still wouldn't install)
-diskpart > list disk > select disk 0 > list partition > active \ in cmd..I have three hard drives attached to the computer right now, they can't all be broken. T.T
I want to create a new partition to load Linux on it (on my Windows 7 system). Now I currently have a C-drive(Windows), a D-Drive(80GB) and an E-Drive(400MB). Now how do I create a new partition for Linux, without using the windows cd and booting from it? Can I use Virtual Hard Disk(VHD)?
View 4 Replies View Relatedwhile i am formating my laptop i cant create more than 4 primary partiotion
what is the reason behind that error .
I've done a clean format to my OS . But at the partition creation part , some of my hdd couldn't be used to make a partition of it . I'll give you a screenshot to explain my problem better s you can see after the process tells me that creation of a new partition has been completed i end up seeing this error
View 9 Replies View RelatedI've been trying to set up a 2nd partition to put a 32bit windows 7 on, but I can't.But it's not letting me edit how much I want to shrink my drive by. Even if I manually put in a number, the "Shrink" button is gray and I cannot click on it.
View 2 Replies View Relatedim trying to create 3 accounts each on its on partition in windows7 how can i do that?
View 2 Replies View Relatedi am using lenovo y510 laptop which comes with an hidden OEM partition which can be used for "one key recovery" process to restore original settings or to format the pc without any cd or dvd or usb and it is a very nice feature a laptop can have...
now my question is...
my laptop has vista home basic in its OEM partition...is there anyway to change it to Windows 7...so that it can format Windows 7 whenever i press recovery key ?
or is there anyway to do something like this ?
when I'm formatting a HDD that is completely clean (no partitions or volumes) should I create a partition or some kind of volume to format the drive, which will format the whole drive, I don't know which one to go with.
If partition, what kind, primary extended etc. If volume, what kind of volume RAID, stripe etc
I have an odd problem - I have 2 drives - one SATA one IDE on the motherboard to choose from. Both blank. The install program sees them, apparently can partition them (let's me into advanced options), but when i select either one to install to, gives an error that it cannot create the partition.
View 6 Replies View Relatedi got a new hp laptop which already as 3 partitions. C:, Recovery (D) and Local Disk (Q). Since iam very new, i want to know can i take a Backup of the Recovery(D) in DVDs and restore the space (capacity) to C drive? Or is it necessary to have it in the system? When i try to make a partition from C drive, the same old prob of getting Dynamic disk conversion comes up...Now dat i got back all the unallocated partition back to C, how do i create another new partition? I tried checking with other posts but was unable to understand..
View 3 Replies View Related