why does Windows 7 want always format a truecrypt partition? i have an external hard disk 2 partition ntfs file system 1 was encrypted with truecrypt 32bit under Windows 7 32bit everytime , Windows 7 pop up with a request to format the drive.i don't auto mount the partition, i mount the partition always when i need so when the partition is not mounted , Windows 7 asks me to format.
View 2 Replies
I've been using TrueCrypt 7.0a to encrypt the partitions on my external and internal hard drives for quite some time now. In fact, because I had no other available space, I copied a disc iso to one such partition just last night? This morning, however, when I try to mount and access that partition, Windows won't recognize the mounted partition, and when I run "repair filesystem" from within TrueCrypt -- the equivalent of running chkdsk from a command prompt, I get: Corrupt master file table. Windows will attempt to recover master file table from disk. After a lengthy wait (it IS a 250GB partition), it returns the message I least want to hear: Windows cannot recover master file table. CHKDSK aborted.
View 9 Replies View RelatedI have a problem with two external-hardrives that I cant access. I keep getting incorrect password or not a truecrypt volume I have one drive that is a 2 terabyte drive and another one that's 1 terabyte. They both where working fine when I tested them about a week ago. Since Saturday I have been trying to access the 2 terabyte drive, but I just keep getting incorrect password.Yesterday I also tested the 1 terabyte drive but still no luck. I know that both the drives cant be malfunctioning.
View 9 Replies View RelatedTable top, Acer brand, Aspire M5700HDD: 500GBPart: 1. Hidden partition, 20GB, eRecovery2.Partition C partitioned by Acer, 240GB, OS3. Partition D partitioned by Acer, 240GBI plan to format both C and D partitions and make 4 partitions.So, check with Acer firstAcer's reply is confusing, saying that the hidden partition will be damaged if format C partition
View 9 Replies View RelatedI have two windows on my system, one in drive C and another in drive D. Both are windows 7. Now, I want to format the partition D but I cannot. could u please help me in this issue? I want just keep the windows in drive C and format all thing of drive D...
View 3 Replies View RelatedRecently, after trying to format a memory stick I have encountered some problems:
- After right clicking on the stick or on a partition and selecting format, nothing happens. Literally nothing, its like I didn't press it.
- Another a bit troubling issue, is that when I tried to scan with my antivirus, I get that the scan engine cant initialize, although the whole software works. I am using Bitdefender Internet Security 2010
I am currently scanning with ESET Online Scanned for viruses, to be sure I don't have a nasty one, but from what I see is that other then that, everything works fine. Finished the scan, with no issues. Also the troubling memory stick, i went to another PC, and was virus free and also was easily formatted. So i am afraid is something related to the system or something like that.
but i was wondering do i delete the partition and then create a new partition or do i format it? (see picture)
View 6 Replies View RelatedI had to install windows 7 in my pc.....bt while installing a message always shows up saying "windows could not format a partition on disk 0.an error occured while preparing the partition for installation.error code 0x80070057"my hard drive is samsung HD502H(500GB) and have a partition of 93.1GB.
View 1 Replies View RelatedI am on my grandparents desktop, and they recently had me dual boot Windows 7 onto their Windows XP machine, and they now no longer need XP anymore. The XP partition is listed as a System, Healthy, Active, Primary partition. The 7 partition is listed as a Boot, Active, Healthy, Logical partition. How can I delete/format the XP partition and make the Windows 7 a primary partition? I have tried by using Disk Manager, and Eauseus Partition Manager, but it won't let me convert it to primary, or format the XP partition.
View 14 Replies View RelatedI recently switched from a Mac to a PC. I cloned my system partition of my PC to my external hard disk, and I only realized later that the external HDD was in a Mac OS extended (journaled) format. I thought I would have to format that partition as NTFS and re-clone afterwards. I tried to remove that partition using Disk Utilities on my Mac but got an error message. Surprisingly, though, when I connected the external HDD to my PC, I can access that partition under My Computer, and when I open Disk Management that partition is listed as NTFS.
1) How can I tell if the cloned partition on my external HDD is ok?
2) Should I reformat it and start from scratch instead?
3) If so, should I be making an image OR a clone of my system disk (so that I can boot from my external HDD and restore my system if my internal HDD fails)?
I just got a new hard drive and a dvd drive because both my hard drive and dvd drive both died. So I got it all set up in my comp and everything seemed to be going fine but I keep getting the windows could not format a partition on disk 0 The error occurred while preparing the installation. error code 0x80070057.
View 5 Replies View RelatedI've just purchased a new desktop Extra Value Desktop PC - Desktops | Ebuyer.com along with an OEM Windows 7 64bit. This is a fresh install on a brand new PC. Every time I get the same error message "windows could not format the partition on disk 0. The error occurred while preparing the partition selected for installation. Error code: 0x80070057". I've just removing RAM and still same problem. Even tried install XP and after 3 hours fomating the drive it it came up with this error ""Setup was unable to format the partition. The disk may be damaged."
View 9 Replies View RelatedI am trying to do a clean install of windows 7 onto my laptop, and I keep getting the error, "windows could not format a partition on disk 0. The error occurred while preparing the partition selected for installation. Error code: 0x80070057" . I have reformatted the hard drive and tried clicking next from there. This is the 64-bit version of windows 7
View 9 Replies View RelatedYesterday evening I was having computer problems so I decided to do a clean reinstall of WIndows 7. I cleaned out some partitions and then tried to put WIndows 7 on the fresh partition. The process began and then I got a mesage saying that Windows cold not format a partition on disk 0. This error occured while preparing the partition selected for installtin. Error code 0x80070057I also get a message when I restart the computer saying ¨Missing Operaing system¨ I´m guessing that that means I cant log in to fix this problem
View 3 Replies View RelatedA couple of weeks ago a storm blew through and knocked out my power for a moment, then it came back on. Within a few seconds, another wind gust and it ripped our power lines down.Got power back a few days later, and have been busy trying to fix this on my own but to no avail.
My computer booted into system recovery tools, start up problem fixes etc. none of them worked, leading to the decision to format my SSD and try to reinstall windows 7. I get to "windows is copying files" and it stays stuck at 0% for about a minute or two, then I get "Windows could not format a partition on disk 1. The error occured while preparing the partition selected for installation. Error code: 0x8007057.
I concluded that I should try deleting the partition and creating a new one. That however, got me this message:Failed to delete the selected partition. [Error: 0x8007017].So I decided to try and format the drive, to this result:
Failed to format the selected partition. [Error: 0x8007057].
Same result as when I was trying to install. Puzzles me! I've still got a lot to learn.I've tried removing unnecessary RAM, same results.Having the same problem with a Vista 64 bit install disk, and have tried to install on my SSD and HDD with no differences.
System:
ASUS Sabertooth X58 MoBo
Core i7 920
6gb DDR3 1600mhz corsair RAM
RiDATA 32GB SSD (OS drive)
1TB Western Digital HDD
and one other 500GB HDD (I forget the brand)
I want to format my D: drive to clear some space. Thing is my D: used to be my C: drive under XP when i was dual booting so its showing as an active primary partition and Windows 7 wont let me format it.
Ive tried deleting everything but some things are refusing to go (like the file boot which i assume is to do with dual booting).
on my netbook there is C drive which is FAT 32 and D drive which is NTFS. the thing is i have windows xp dualbooting windows xp (i know its weird). i am only using C drive so i want to format the D drive and merge it with C drive so i can have more space. the thing is it doesnt let me delete it. i tried using Easus Partition manager, but there was no delete option or anything like that. i cant use the CD because mine is a netbook. also booting from USB does not work because my computer is old and it doesnt support booting from usb in BIOS.
View 9 Replies View RelatedI'm trying to install windows 7 64bit OEM but in the custom install options i can't format the partition i want to install to. The partitions were created under XP on a secondary drive, which will now be the primary drive, XP will be wiped later and that drive i have actually disconnected for the time being. The only options i can access are "refresh" and "load driver"
I'm not too sure whether i need an updated sata driver controller (asus M2N AM2 mobo - nforce controller) or i need to make the partition active using something like the diskpart utility.I've looked at the asus website and there are no updated sata drivers for windows 7 or even vista 64bit, only a beta raid driver.
Or is it the partitions themselves since they were created under XP (although i don't think its this)I've found some posts on here with similair sounding problems but hoping someone with a bit more knowledge can tell me which is most likely to be the cause and save me a bit of time.
I am looking to upgrade my current 4GB of ram to 8GB. For this I understand that I need the 64 bit version of Windows XP. I have a hard drive with 3 partitions and I was wondering whether it was possible to back up all of my stuff on another partition rather than using an external hard drive. Does installing a new OS only format one partition?
View 1 Replies View RelatedI use EASEUS Partition Master 8.0.1 Home Edition on windows 7 sp1.I have resized several times my different partions with no trouble.But now i had increased one of my drives and now i can t acces and open it because of this error :http://up.iranblog.com/images/q3butas4t6yrog2ae94.png, how can i with out formatting it, resolve the problem ?
View 1 Replies View Relatedthe thing is iv accidentally performed a quick format on an WD Green 2TB drive with XP pro installation. what i want is to recover the whole complete partition as it was (1 ntfs partition was on the disk) include names/structure and all. i dont have a 2TB space to image the disk, so all the recovery tools should be nondestructive, however i do have 2TB free to recovering to.Just to be clear the disk didnt have an os on it, it wasnt the primary,but a storage?
View 8 Replies View RelatedI recently upgrade my entire computer, with it i brought a 2TB WD HDD. I set everything up, installed Windows 7 and updated all my drivers/etc.
I then moved my old 3x 1TB drives over, in it, one partition had my old Windows 7, I am unable to format/delete windows folder/program files. One HDD had my old Vista partition, same story..i can't format/delete.
What i basically want to do is, take those 3 drives, format and re-set them into 1TB 1 Parition drives. Now i have 1.6TB space left on my 2TB drive, so i can put one entire drive over and format the old, repartition to 1...
How can i get about this? I don't understand why the boot system will have problems because when i installed Windows 7 it had no other drives to see..
I use EASEUS Partition Master 8.0.1 Home Edition on windows 7 sp1. I have resized several times my different partions with no trouble. But now I had increased one of my drives and now i can t acces and open it because of this error : [URL]. I can't format it because of the data in it and with any possible access to the drive, I have not enough space on my hard drive to copy data to another drive.
View 3 Replies View RelatedI installed a os on a separate drive , now i was going to delete partition / and or format that drive in the "right click my computer and maintenance" but i cannot because format and delete partition are grayed out. The drive is displayed as having a paging file. How can i delete this partition and format this drive? Can't also in safe mode
View 1 Replies View RelatedI just tested this with Windows 7 Upgrade disk:
MS makes it clear that using Windows 7 Upgrade disk with XP requires a clean (Custom) install, which most people assume means over the same XP. This can be done, and places your files in windows.old for redistribution. This is only an option for Vista, since you can do an in-place upgrade which reinstalls your programs, files and settings.
You can also direct the clean install to another formatted partition or second primary formatted HDD which allows for a cleaner install. The problem is that you may still have XP in the first partition on the same HDD, which you probably will not want for long, and a laptop is hard to connect to a second HDD. Plus, an OS in an outer HDD partition takes a fraction longer to be read by the laser.
But there is a way to install from XP with an Upgrade disk to to a clean formatted first partition. Here is the way I did it:
Use a Partition manager like Paragon or Easeus to copy your XP partition over to a partition other than the first (or install XP to another partition) then use EasyBCD to Add it to the Boot Menu if necessary.
Now comes the hat trick: Boot into the new XP partition and use Disk Management to mark it active, then go to Control Panel>Folder options and show hidden system files. Make sure boot.ini, ntldr, and ntdetect.com are in the roots of both OS drives so you can boot back into XP later.
Now delete and format the first partition using Disk Management (or Easeus) from the XP desktop, then without rebooting install WIndows 7 to the first partition. After install, you can copy files over from XP via explorer and then hide or delete the XP partition, because you now have the best operating system ever and it's installed on formatted metal from an Upgrade disk.
Be sure to use Windows 7's great new imaging backup to image your installation after you get it like you want it, so you'll never have to reinstall again.
is there a way to format a partition on my windows 7 laptop to be able to read a mac osx drive?
View 7 Replies View RelatedI was installing windows 7 on a mac. Complications arose and i just formatted the hard drive and installed windows. I just realized i left a few files on the mac side that I need. I know that you can recover stuff after deleting them as long as you dont overwrite the hard drive, the problem is, i partitioned it for windows. Can i still get those files back even tho i partitioned it?
View 4 Replies View RelatedI have a Hp pavilion g6, I've lost my recovery partition and I need to format my computer, when i start it, I have windows 7 on DVD but when I insert it and I click on F11 this message appears :
Windows failed to start. A recent hardware of software change might be the cause. To fix the problem:
1. Insert your Windows installation disc and restart your computer
2. Choose your language settings, and then click "Next."
3. Click "Repair your computer."
If you do not have this disc, contact your system administrator or computer manufacturer for assistance.
File: BootBCD
Status: 0xc0000225
Info: An error occurred when attempting to read the boot configuration data
im having this prob where a total of 40GB of space out of 160Gb in my HD cant be formatted. I were using Windows Vista before upgrading it into Win 7....
I had 3 partitions ( c:, d:, & N... All 3 of it works perfectly. The only problem im facing here is with this 40GB of free space which i couldn't Format in anyway.. it keeps on bugging me with this warning of "not enough space to complete operation" thingy...
Here is an image of it, where the green colored free space (39.06Gb)... cant be formatted.
I tried Formatting it while the Windows 7 installation process, yet, i still couldn't do anything.
Once you get to the Custom (Advanced) tab of Windows 7 clean install there are options to delete the partition, format, etc. Assuming I want to delete all of my partitions so that I have one large volume C: is it best to delete the partitions first and then format? Why would someone do one over the other (or both?) Right now I have a C: partition and a D:RECOVERY partition. I want to delete the D: partition and combine it to the C: partition.Don't they do the same thing? Why do you need to format after you delete a partition ? Do I also delete the C: partition and "re-create" it? What about the term "Unallocated Space"
View 9 Replies View RelatedCan i format the primary partition in a dual booted system that is xp and windows 7 where xp is the primary partiyion. And would the other os still work
View 1 Replies View Related
