Format Partition C Damages The Hidden Partition?
Jun 6, 2011
Table top, Acer brand, Aspire M5700HDD: 500GBPart: 1. Hidden partition, 20GB, eRecovery2.Partition C partitioned by Acer, 240GB, OS3. Partition D partitioned by Acer, 240GBI plan to format both C and D partitions and make 4 partitions.So, check with Acer firstAcer's reply is confusing, saying that the hidden partition will be damaged if format C partition
View 9 Replies
ADVERTISEMENT
Oct 29, 2009
If you install win7 on a new hdd, I understand it will create a 100MB hidden partition to hold critical system files. What exactly is its purpose, compared to say, System Restore?
View 5 Replies
View Related
Jan 27, 2012
My partition is hidden in formatted hdd.
View 1 Replies
View Related
Jul 18, 2011
Got an HP Mini 110 netbook. A person who gave it to me destroyed all the OS system, plus the RAM's were broken. So I replaced them and installed a fresh copy of Windows 7 Starter 32bit. Everything works fine, but as most new laptops this one has a hidden recovery partition. The problem is I want to restore this machine to factory condition, but I cant access it due to the fact that I dont have HP Recovery Manager or something like that. The recovery partition itself is okay as I saw in Admin Tools. When going to System Recovery Options / System Image Recovery, the process cant detect any image - "Windows cant find a system image on this computer".
what could I use to restore it to factory condition? Maybe there is a software that I can install and use in the same way as HP Recovery Manager? Or maybe I can get HP Recovery Manager somewhere. so that you know, I also tried the F6 and itc methods, no luck.
View 7 Replies
View Related
Oct 17, 2011
I'll make this one short. I had some time ago a GX623 laptop that had a hidden partition from where I installed win7. If anything went wrong, i just asked the laptop on startup to run the recovery manager, and boom, factory settings in 20 minutes flat (cleaned HDD). Now I am planning to get myself a reduced version of the 780DX MSI laptop (normally 2 hdds in raid 0), and i want to get a SSD as boot and a fw extras drive. The problem is i wanted to have that hidden partition on the SSD (and i plan to buy it apart and put it in myself once i figure out the laptop is stable). How to create your own hidden OS install partition...
View 7 Replies
View Related
May 23, 2012
my Acer Aspire 5738G to factory settings. (I've done it before and i never seemed to have a problem). I know it should be simple to do this, by simply pressing "Alt" and "F10" at the Acer Splashpage when you bootup, and going to the acer eRecovery page. But when i do this i get the error message."HDD RECOVERY VALIDATION FAILED" I've tried my hardest, searched all over google for a solution, but every problem seems to be different.And i can't figure out what is particularly wrong with my computer. I am only an amateur when it comes to computers, and disks, partitions, locating partitions, etc etc is not my strong suit. Is there anyway i can check if the hidden partition "PQservice" is still in my drives? If it helps in anyway, i though i might mention that the previous time i restored back to factory settings.When i completed it, i didn't fully complete the windows installation process, and now whenever i log into my computer, it mentions that my "windows is not yet genuine, click here to register it blah blah blah". I didn't bother doing it because i assumed it wasn't vital, i was and have still been able to use my computer fine for the past year or so without having to do it.
View 3 Replies
View Related
Oct 14, 2012
I want to delete the hidden primary partition that came by default from transcend 4 GB pen drive model TS4GJFV30. It is preventing the drive to boot with windows 7. Also it is not allowing the drive to play media files on media peripherals.
View 3 Replies
View Related
May 28, 2009
I want to format my D: drive to clear some space. Thing is my D: used to be my C: drive under XP when i was dual booting so its showing as an active primary partition and Windows 7 wont let me format it.
Ive tried deleting everything but some things are refusing to go (like the file boot which i assume is to do with dual booting).
View 9 Replies
View Related
Jul 16, 2011
I have two windows on my system, one in drive C and another in drive D. Both are windows 7. Now, I want to format the partition D but I cannot. could u please help me in this issue? I want just keep the windows in drive C and format all thing of drive D...
View 3 Replies
View Related
Mar 23, 2012
on my netbook there is C drive which is FAT 32 and D drive which is NTFS. the thing is i have windows xp dualbooting windows xp (i know its weird). i am only using C drive so i want to format the D drive and merge it with C drive so i can have more space. the thing is it doesnt let me delete it. i tried using Easus Partition manager, but there was no delete option or anything like that. i cant use the CD because mine is a netbook. also booting from USB does not work because my computer is old and it doesnt support booting from usb in BIOS.
View 9 Replies
View Related
Jul 19, 2010
I'm trying to install windows 7 64bit OEM but in the custom install options i can't format the partition i want to install to. The partitions were created under XP on a secondary drive, which will now be the primary drive, XP will be wiped later and that drive i have actually disconnected for the time being. The only options i can access are "refresh" and "load driver"
I'm not too sure whether i need an updated sata driver controller (asus M2N AM2 mobo - nforce controller) or i need to make the partition active using something like the diskpart utility.I've looked at the asus website and there are no updated sata drivers for windows 7 or even vista 64bit, only a beta raid driver.
Or is it the partitions themselves since they were created under XP (although i don't think its this)I've found some posts on here with similair sounding problems but hoping someone with a bit more knowledge can tell me which is most likely to be the cause and save me a bit of time.
View 4 Replies
View Related
Dec 17, 2011
I am looking to upgrade my current 4GB of ram to 8GB. For this I understand that I need the 64 bit version of Windows XP. I have a hard drive with 3 partitions and I was wondering whether it was possible to back up all of my stuff on another partition rather than using an external hard drive. Does installing a new OS only format one partition?
View 1 Replies
View Related
Jan 23, 2013
I install Windows 7 64 bit in a 60 gb partition of my HDD (C drive). I have about 200 GB free space in D drive. Now I want to make a 60 GB partition from the free space of D drive.
View 4 Replies
View Related
May 26, 2011
I use EASEUS Partition Master 8.0.1 Home Edition on windows 7 sp1.I have resized several times my different partions with no trouble.But now i had increased one of my drives and now i can t acces and open it because of this error :http://up.iranblog.com/images/q3butas4t6yrog2ae94.png, how can i with out formatting it, resolve the problem ?
View 1 Replies
View Related
Oct 26, 2012
the thing is iv accidentally performed a quick format on an WD Green 2TB drive with XP pro installation. what i want is to recover the whole complete partition as it was (1 ntfs partition was on the disk) include names/structure and all. i dont have a 2TB space to image the disk, so all the recovery tools should be nondestructive, however i do have 2TB free to recovering to.Just to be clear the disk didnt have an os on it, it wasnt the primary,but a storage?
View 8 Replies
View Related
Feb 10, 2011
I recently upgrade my entire computer, with it i brought a 2TB WD HDD. I set everything up, installed Windows 7 and updated all my drivers/etc.
I then moved my old 3x 1TB drives over, in it, one partition had my old Windows 7, I am unable to format/delete windows folder/program files. One HDD had my old Vista partition, same story..i can't format/delete.
What i basically want to do is, take those 3 drives, format and re-set them into 1TB 1 Parition drives. Now i have 1.6TB space left on my 2TB drive, so i can put one entire drive over and format the old, repartition to 1...
How can i get about this? I don't understand why the boot system will have problems because when i installed Windows 7 it had no other drives to see..
View 4 Replies
View Related
May 26, 2011
I use EASEUS Partition Master 8.0.1 Home Edition on windows 7 sp1. I have resized several times my different partions with no trouble. But now I had increased one of my drives and now i can t acces and open it because of this error : [URL]. I can't format it because of the data in it and with any possible access to the drive, I have not enough space on my hard drive to copy data to another drive.
View 3 Replies
View Related
May 24, 2012
I installed a os on a separate drive , now i was going to delete partition / and or format that drive in the "right click my computer and maintenance" but i cannot because format and delete partition are grayed out. The drive is displayed as having a paging file. How can i delete this partition and format this drive? Can't also in safe mode
View 1 Replies
View Related
May 27, 2012
why does Windows 7 want always format a truecrypt partition? i have an external hard disk 2 partition ntfs file system 1 was encrypted with truecrypt 32bit under Windows 7 32bit everytime , Windows 7 pop up with a request to format the drive.i don't auto mount the partition, i mount the partition always when i need so when the partition is not mounted , Windows 7 asks me to format.
View 2 Replies
View Related
Oct 20, 2009
I just tested this with Windows 7 Upgrade disk:
MS makes it clear that using Windows 7 Upgrade disk with XP requires a clean (Custom) install, which most people assume means over the same XP. This can be done, and places your files in windows.old for redistribution. This is only an option for Vista, since you can do an in-place upgrade which reinstalls your programs, files and settings.
You can also direct the clean install to another formatted partition or second primary formatted HDD which allows for a cleaner install. The problem is that you may still have XP in the first partition on the same HDD, which you probably will not want for long, and a laptop is hard to connect to a second HDD. Plus, an OS in an outer HDD partition takes a fraction longer to be read by the laser.
But there is a way to install from XP with an Upgrade disk to to a clean formatted first partition. Here is the way I did it:
Use a Partition manager like Paragon or Easeus to copy your XP partition over to a partition other than the first (or install XP to another partition) then use EasyBCD to Add it to the Boot Menu if necessary.
Now comes the hat trick: Boot into the new XP partition and use Disk Management to mark it active, then go to Control Panel>Folder options and show hidden system files. Make sure boot.ini, ntldr, and ntdetect.com are in the roots of both OS drives so you can boot back into XP later.
Now delete and format the first partition using Disk Management (or Easeus) from the XP desktop, then without rebooting install WIndows 7 to the first partition. After install, you can copy files over from XP via explorer and then hide or delete the XP partition, because you now have the best operating system ever and it's installed on formatted metal from an Upgrade disk.
Be sure to use Windows 7's great new imaging backup to image your installation after you get it like you want it, so you'll never have to reinstall again.
View 3 Replies
View Related
May 1, 2012
is there a way to format a partition on my windows 7 laptop to be able to read a mac osx drive?
View 7 Replies
View Related
Jan 24, 2013
I was installing windows 7 on a mac. Complications arose and i just formatted the hard drive and installed windows. I just realized i left a few files on the mac side that I need. I know that you can recover stuff after deleting them as long as you dont overwrite the hard drive, the problem is, i partitioned it for windows. Can i still get those files back even tho i partitioned it?
View 4 Replies
View Related
Jul 17, 2011
Recently, after trying to format a memory stick I have encountered some problems:
- After right clicking on the stick or on a partition and selecting format, nothing happens. Literally nothing, its like I didn't press it.
- Another a bit troubling issue, is that when I tried to scan with my antivirus, I get that the scan engine cant initialize, although the whole software works. I am using Bitdefender Internet Security 2010
I am currently scanning with ESET Online Scanned for viruses, to be sure I don't have a nasty one, but from what I see is that other then that, everything works fine. Finished the scan, with no issues. Also the troubling memory stick, i went to another PC, and was virus free and also was easily formatted. So i am afraid is something related to the system or something like that.
View 5 Replies
View Related
Oct 4, 2012
but i was wondering do i delete the partition and then create a new partition or do i format it? (see picture)
View 6 Replies
View Related
Nov 5, 2011
I had to install windows 7 in my pc.....bt while installing a message always shows up saying "windows could not format a partition on disk 0.an error occured while preparing the partition for installation.error code 0x80070057"my hard drive is samsung HD502H(500GB) and have a partition of 93.1GB.
View 1 Replies
View Related
Oct 31, 2012
I have a Hp pavilion g6, I've lost my recovery partition and I need to format my computer, when i start it, I have windows 7 on DVD but when I insert it and I click on F11 this message appears :
Windows failed to start. A recent hardware of software change might be the cause. To fix the problem:
1. Insert your Windows installation disc and restart your computer
2. Choose your language settings, and then click "Next."
3. Click "Repair your computer."
If you do not have this disc, contact your system administrator or computer manufacturer for assistance.
File: BootBCD
Status: 0xc0000225
Info: An error occurred when attempting to read the boot configuration data
View 4 Replies
View Related
Dec 27, 2009
im having this prob where a total of 40GB of space out of 160Gb in my HD cant be formatted. I were using Windows Vista before upgrading it into Win 7....
I had 3 partitions ( c:, d:, & N... All 3 of it works perfectly. The only problem im facing here is with this 40GB of free space which i couldn't Format in anyway.. it keeps on bugging me with this warning of "not enough space to complete operation" thingy...
Here is an image of it, where the green colored free space (39.06Gb)... cant be formatted.
I tried Formatting it while the Windows 7 installation process, yet, i still couldn't do anything.
View 9 Replies
View Related
Jul 26, 2010
Once you get to the Custom (Advanced) tab of Windows 7 clean install there are options to delete the partition, format, etc. Assuming I want to delete all of my partitions so that I have one large volume C: is it best to delete the partitions first and then format? Why would someone do one over the other (or both?) Right now I have a C: partition and a D:RECOVERY partition. I want to delete the D: partition and combine it to the C: partition.Don't they do the same thing? Why do you need to format after you delete a partition ? Do I also delete the C: partition and "re-create" it? What about the term "Unallocated Space"
View 9 Replies
View Related
Sep 26, 2010
Can i format the primary partition in a dual booted system that is xp and windows 7 where xp is the primary partiyion. And would the other os still work
View 1 Replies
View Related
Jun 21, 2011
I am on my grandparents desktop, and they recently had me dual boot Windows 7 onto their Windows XP machine, and they now no longer need XP anymore. The XP partition is listed as a System, Healthy, Active, Primary partition. The 7 partition is listed as a Boot, Active, Healthy, Logical partition. How can I delete/format the XP partition and make the Windows 7 a primary partition? I have tried by using Disk Manager, and Eauseus Partition Manager, but it won't let me convert it to primary, or format the XP partition.
View 14 Replies
View Related
Nov 10, 2012
I recently switched from a Mac to a PC. I cloned my system partition of my PC to my external hard disk, and I only realized later that the external HDD was in a Mac OS extended (journaled) format. I thought I would have to format that partition as NTFS and re-clone afterwards. I tried to remove that partition using Disk Utilities on my Mac but got an error message. Surprisingly, though, when I connected the external HDD to my PC, I can access that partition under My Computer, and when I open Disk Management that partition is listed as NTFS.
1) How can I tell if the cloned partition on my external HDD is ok?
2) Should I reformat it and start from scratch instead?
3) If so, should I be making an image OR a clone of my system disk (so that I can boot from my external HDD and restore my system if my internal HDD fails)?
View 1 Replies
View Related