How To Format NTFS Partition
Mar 23, 2012
on my netbook there is C drive which is FAT 32 and D drive which is NTFS. the thing is i have windows xp dualbooting windows xp (i know its weird). i am only using C drive so i want to format the D drive and merge it with C drive so i can have more space. the thing is it doesnt let me delete it. i tried using Easus Partition manager, but there was no delete option or anything like that. i cant use the CD because mine is a netbook. also booting from USB does not work because my computer is old and it doesnt support booting from usb in BIOS.
View 9 Replies
ADVERTISEMENT
Sep 23, 2012
This is an issue with trying to use the Windows Backup utility with an external hard drive (Seagate GoFlex Desk) with more than 2TB of storage (in this case 3TB). I have looked into this and found that this is a common problem related to the backup utility being unable to deal with drives that have a 4kb allocation unit size. The typical advice is to reformat with an allocation size of 512B, which it will be able to work with.
The problem is that Windows will not let me reformat with that size. The smallest unit it allows is 4kb, which is exactly the problem. If I initiate the format dialog on other NTFS drives I have, 512B shows up as an option. Just not on my external. And yet, this solution appears all over the place and people have claimed it solved their problem. I have even (twice) tried creating a second partition on the external (1.5TB and then 1TB), neither has allowed an allocation unit size less than 4k, even though my 1TB internal drive did allow this.
I am not really interested in third party backup or imaging programs. With my old 500GB external, I used the Windows Backup utility to make a few system images and there have been at least two situations where a bad driver or something has resulted in having to go back to a restore point, but finding no suitable ones available, and thus restoring to the backup image. This has been the simplest way of recovering from these disasters and it has worked every time. For normal file backups, I have a number of cloud storage systems and I can use the software Seagate included with the drive. However, the one and only reason I got a hard drive this large is that it would allow me to make a lot of Windows system images, and that is the one thing I am unable to do. I do not understand why I cannot use the one fix everyone online recommends. I have emailed Seagate tech support about this but they have not responded.
View 5 Replies
View Related
Mar 15, 2011
just got a new laptop.From thw store where he bought it,the OS of the laptop was an Ubuntu.I tried to install windows 7,but won't let me.I can't access "Format" from the installation process.Down on the windows that is opened when installing windows 7,it says "Windows 7 cannot be installed on this partition because the format is not NTFS,and is not enough space on the disk"The laptop got only 2 partitions 0 and 1,and both of them are out of free space.
View 9 Replies
View Related
Sep 5, 2011
My drive passed SMART extended self test that scans the entire disk surface. Is the full format with command FORMAT FS=NTFS overkill?
View 4 Replies
View Related
May 9, 2011
I have a second hard drive that is formatted FAT32 and I need to reformat it to NTFS so I can install Windows XP as a dual boot option. It shows 146GB of 148GB free space; however, when I open the drive it says "This folder is empty". I once had Ubuntu installed and reformatted the drive, but it may be hidden somewhere on the drive. I have tried to reformat by right clicking the drive letter and using the format command, but I get an error message "Windows cannot format this drive. Quit any disk utilities or other programs that are using this drive, and make sure no window is displaying the contents of the drive. Then try formatting again.". When I check the drive for contents using CMD it says "Volume in drive is New Volume Directory of D: File Not Found". When I try to format D: from the C: prompt, it says "Access Denied as you do not have sufficient privileges. You have to invoke this utility running in elevated mode." I am logged on as Administrator
View 6 Replies
View Related
Mar 12, 2010
I have Windows 7 on my main machine and am using a spare drive right now. Power went out and when I turned my computer back on, it wouldn't start so I removed the HDD and plugged it into test computer which was when I found it had become a RAW file system.Alright, so basically I'm wondering how I should convert my RAW drive back into NTFS so I can use it again and I'm not interested in retrieving information as I had nothing of value on that drive, because all important stuff is on my storage drive - which is 1TB in size. I have tried a variety of methods including.
1. Using Disk Management, even though it recognizes it and shows it as a RAW format - I am unable to format it as it gives me a "Format could not be succesfully completed" error message, also deleting and making new partitions has no effect.
2. Tried using DOS to convert it from RAW to NTFS
3. Tried using programs like PTDD Partition Table Doctor and EASUES Partition Master to rebuild the partitions, fix the Master Boot Record and then convert to either FAT32 or NTFS (if it's FAT32 I'll convert it to NTFS afterwards)
4. Tried to format from the "My Computer" window via right-clicking and selecting "Format"
5. According to TestDisk I have 0 partitions and when I do a deep search it forks of a load of read errors. :
As far as I know, PPTD Partition Table Doctor tells me that there sector count is incorrect and that the MBR is in the the wrong section.If you want my system specifications, Here:
Windows 7 64-bit
AMD Athlon X2 6400+ 3.2GH
6GB DDR2 RAM 667
BFG GTX 260 (216) OCX
1TB Green Cavier Western Digital
80GB Seagate Barracuda (Now in RAW format)
View 10 Replies
View Related
Jan 30, 2012
I have a new windows 7 64-bit computer and two 4-year old external Western Digital HDDs. They connect fine and transfer data okay except when i try to do a Windows system mirror.All was well with XP Pro and the same HDDs but Windows 7 tells me the HDDs are not formatted to NTFS.Firstly, what does this mean as i would really like a system mirror and secondly, is there a way round it withpout formatting the HDDs and losing all the data?
View 6 Replies
View Related
Aug 30, 2012
I had to use my thumb drive to upload files to a Mac, so I reformatted the drive to FAT32. Now I'm trying to get it back to NTFS so I can use again on my Win 7 machine, but the drive is not even showing up in My Computer.
The Drive shows in Device Manager and in Disk Management, but offers me no option to format.
View 4 Replies
View Related
Dec 14, 2012
used gparted to copy partition from windows7 laptop to usb ext HD as ntfs partition. iam am able to view files and evrything ok. when i reboot into win7 it sees partition as RAW. its says i need to format it.
View 4 Replies
View Related
Nov 7, 2009
I had a Windows 7 installation, x64 and recently I installed windows XP, quit Windows 7 for a while. I have a big problem, I have a 160GB SATA2 Maxtor HDD, I first formatted/part'ed when I had installed windows7, and now being back to my xp I cannot browse the partition, the driver letter appears but I cannot access the information, i put the drive in another computer running Windows 7 and all the data was accessible. I tried like a ton of part. managers and no luck so far.
My question is how can I convert my partition back to NTFS from extFS or WinFS?
Google didn't helped me at all, it's been 2 days since I am looking for a solution to this, no result on google (or this forum or other forums for that matter) will give me a compatible partition manager/tool or I am unable to find the keywords for it.
View 9 Replies
View Related
Jun 6, 2011
Table top, Acer brand, Aspire M5700HDD: 500GBPart: 1. Hidden partition, 20GB, eRecovery2.Partition C partitioned by Acer, 240GB, OS3. Partition D partitioned by Acer, 240GBI plan to format both C and D partitions and make 4 partitions.So, check with Acer firstAcer's reply is confusing, saying that the hidden partition will be damaged if format C partition
View 9 Replies
View Related
Dec 1, 2011
I have a triple boot system: XP 32 bit, XP 64 bit, Win7 Pro 64 bit, each on a separate partition on separate hard drives. I can backup each of the XP OS partitions with a program I wrote that basically does a file and folder copy to a folder in a spare partition on one of the hard drives. The copy program I wrote tries to preserve time stamp and short file name info, otherwise, it's just a file and folder copy program. I use windiff to verify after a backup (or restore). For a restore, I can quick format a partition and copy the files back (using the program I wrote).
I tried doing the same with the Win 7 OS partition, backup, quick format, restore, but some of the information (metadata?) is lost. All of the actual data is there, and windiff doesn't show any differences, and Win 7 boots up, but then there are issues. ATI video driver catalyst control center fails to run (don't recall error message). The publisher information for many (or most or all) of the programs is lost, causing User Acess Control dialog box to appear anytime I tried to run a program,which should be Microsoft, but shows up as unknown. Internet Explorer 8 will state that a program has corrupted the default search provider repeatedly (even after selecting one).
So something is different between Win 7 NTFS and Win XP NTFS, or I need to enhance my copy program to copy addtional file information when doing the copies. If I get the time, I'll try a drag and drop from windows explorer in XP to see if that makes any difference.So currently I'm stuck using Win 7 system image backup for the Win 7 OS partition (it also images the C partition which contains the boot files like bootmgr).
View 6 Replies
View Related
May 28, 2009
I want to format my D: drive to clear some space. Thing is my D: used to be my C: drive under XP when i was dual booting so its showing as an active primary partition and Windows 7 wont let me format it.
Ive tried deleting everything but some things are refusing to go (like the file boot which i assume is to do with dual booting).
View 9 Replies
View Related
Jul 16, 2011
I have two windows on my system, one in drive C and another in drive D. Both are windows 7. Now, I want to format the partition D but I cannot. could u please help me in this issue? I want just keep the windows in drive C and format all thing of drive D...
View 3 Replies
View Related
Jul 19, 2010
I'm trying to install windows 7 64bit OEM but in the custom install options i can't format the partition i want to install to. The partitions were created under XP on a secondary drive, which will now be the primary drive, XP will be wiped later and that drive i have actually disconnected for the time being. The only options i can access are "refresh" and "load driver"
I'm not too sure whether i need an updated sata driver controller (asus M2N AM2 mobo - nforce controller) or i need to make the partition active using something like the diskpart utility.I've looked at the asus website and there are no updated sata drivers for windows 7 or even vista 64bit, only a beta raid driver.
Or is it the partitions themselves since they were created under XP (although i don't think its this)I've found some posts on here with similair sounding problems but hoping someone with a bit more knowledge can tell me which is most likely to be the cause and save me a bit of time.
View 4 Replies
View Related
Dec 17, 2011
I am looking to upgrade my current 4GB of ram to 8GB. For this I understand that I need the 64 bit version of Windows XP. I have a hard drive with 3 partitions and I was wondering whether it was possible to back up all of my stuff on another partition rather than using an external hard drive. Does installing a new OS only format one partition?
View 1 Replies
View Related
May 26, 2011
I use EASEUS Partition Master 8.0.1 Home Edition on windows 7 sp1.I have resized several times my different partions with no trouble.But now i had increased one of my drives and now i can t acces and open it because of this error :http://up.iranblog.com/images/q3butas4t6yrog2ae94.png, how can i with out formatting it, resolve the problem ?
View 1 Replies
View Related
Oct 26, 2012
the thing is iv accidentally performed a quick format on an WD Green 2TB drive with XP pro installation. what i want is to recover the whole complete partition as it was (1 ntfs partition was on the disk) include names/structure and all. i dont have a 2TB space to image the disk, so all the recovery tools should be nondestructive, however i do have 2TB free to recovering to.Just to be clear the disk didnt have an os on it, it wasnt the primary,but a storage?
View 8 Replies
View Related
Feb 10, 2011
I recently upgrade my entire computer, with it i brought a 2TB WD HDD. I set everything up, installed Windows 7 and updated all my drivers/etc.
I then moved my old 3x 1TB drives over, in it, one partition had my old Windows 7, I am unable to format/delete windows folder/program files. One HDD had my old Vista partition, same story..i can't format/delete.
What i basically want to do is, take those 3 drives, format and re-set them into 1TB 1 Parition drives. Now i have 1.6TB space left on my 2TB drive, so i can put one entire drive over and format the old, repartition to 1...
How can i get about this? I don't understand why the boot system will have problems because when i installed Windows 7 it had no other drives to see..
View 4 Replies
View Related
May 26, 2011
I use EASEUS Partition Master 8.0.1 Home Edition on windows 7 sp1. I have resized several times my different partions with no trouble. But now I had increased one of my drives and now i can t acces and open it because of this error : [URL]. I can't format it because of the data in it and with any possible access to the drive, I have not enough space on my hard drive to copy data to another drive.
View 3 Replies
View Related
May 24, 2012
I installed a os on a separate drive , now i was going to delete partition / and or format that drive in the "right click my computer and maintenance" but i cannot because format and delete partition are grayed out. The drive is displayed as having a paging file. How can i delete this partition and format this drive? Can't also in safe mode
View 1 Replies
View Related
May 27, 2012
why does Windows 7 want always format a truecrypt partition? i have an external hard disk 2 partition ntfs file system 1 was encrypted with truecrypt 32bit under Windows 7 32bit everytime , Windows 7 pop up with a request to format the drive.i don't auto mount the partition, i mount the partition always when i need so when the partition is not mounted , Windows 7 asks me to format.
View 2 Replies
View Related
Oct 20, 2009
I just tested this with Windows 7 Upgrade disk:
MS makes it clear that using Windows 7 Upgrade disk with XP requires a clean (Custom) install, which most people assume means over the same XP. This can be done, and places your files in windows.old for redistribution. This is only an option for Vista, since you can do an in-place upgrade which reinstalls your programs, files and settings.
You can also direct the clean install to another formatted partition or second primary formatted HDD which allows for a cleaner install. The problem is that you may still have XP in the first partition on the same HDD, which you probably will not want for long, and a laptop is hard to connect to a second HDD. Plus, an OS in an outer HDD partition takes a fraction longer to be read by the laser.
But there is a way to install from XP with an Upgrade disk to to a clean formatted first partition. Here is the way I did it:
Use a Partition manager like Paragon or Easeus to copy your XP partition over to a partition other than the first (or install XP to another partition) then use EasyBCD to Add it to the Boot Menu if necessary.
Now comes the hat trick: Boot into the new XP partition and use Disk Management to mark it active, then go to Control Panel>Folder options and show hidden system files. Make sure boot.ini, ntldr, and ntdetect.com are in the roots of both OS drives so you can boot back into XP later.
Now delete and format the first partition using Disk Management (or Easeus) from the XP desktop, then without rebooting install WIndows 7 to the first partition. After install, you can copy files over from XP via explorer and then hide or delete the XP partition, because you now have the best operating system ever and it's installed on formatted metal from an Upgrade disk.
Be sure to use Windows 7's great new imaging backup to image your installation after you get it like you want it, so you'll never have to reinstall again.
View 3 Replies
View Related
May 1, 2012
is there a way to format a partition on my windows 7 laptop to be able to read a mac osx drive?
View 7 Replies
View Related
Jan 24, 2013
I was installing windows 7 on a mac. Complications arose and i just formatted the hard drive and installed windows. I just realized i left a few files on the mac side that I need. I know that you can recover stuff after deleting them as long as you dont overwrite the hard drive, the problem is, i partitioned it for windows. Can i still get those files back even tho i partitioned it?
View 4 Replies
View Related
Jul 17, 2011
Recently, after trying to format a memory stick I have encountered some problems:
- After right clicking on the stick or on a partition and selecting format, nothing happens. Literally nothing, its like I didn't press it.
- Another a bit troubling issue, is that when I tried to scan with my antivirus, I get that the scan engine cant initialize, although the whole software works. I am using Bitdefender Internet Security 2010
I am currently scanning with ESET Online Scanned for viruses, to be sure I don't have a nasty one, but from what I see is that other then that, everything works fine. Finished the scan, with no issues. Also the troubling memory stick, i went to another PC, and was virus free and also was easily formatted. So i am afraid is something related to the system or something like that.
View 5 Replies
View Related
Oct 4, 2012
but i was wondering do i delete the partition and then create a new partition or do i format it? (see picture)
View 6 Replies
View Related
Nov 5, 2011
I had to install windows 7 in my pc.....bt while installing a message always shows up saying "windows could not format a partition on disk 0.an error occured while preparing the partition for installation.error code 0x80070057"my hard drive is samsung HD502H(500GB) and have a partition of 93.1GB.
View 1 Replies
View Related
Oct 31, 2012
I have a Hp pavilion g6, I've lost my recovery partition and I need to format my computer, when i start it, I have windows 7 on DVD but when I insert it and I click on F11 this message appears :
Windows failed to start. A recent hardware of software change might be the cause. To fix the problem:
1. Insert your Windows installation disc and restart your computer
2. Choose your language settings, and then click "Next."
3. Click "Repair your computer."
If you do not have this disc, contact your system administrator or computer manufacturer for assistance.
File: BootBCD
Status: 0xc0000225
Info: An error occurred when attempting to read the boot configuration data
View 4 Replies
View Related
Dec 27, 2009
im having this prob where a total of 40GB of space out of 160Gb in my HD cant be formatted. I were using Windows Vista before upgrading it into Win 7....
I had 3 partitions ( c:, d:, & N... All 3 of it works perfectly. The only problem im facing here is with this 40GB of free space which i couldn't Format in anyway.. it keeps on bugging me with this warning of "not enough space to complete operation" thingy...
Here is an image of it, where the green colored free space (39.06Gb)... cant be formatted.
I tried Formatting it while the Windows 7 installation process, yet, i still couldn't do anything.
View 9 Replies
View Related
Jul 26, 2010
Once you get to the Custom (Advanced) tab of Windows 7 clean install there are options to delete the partition, format, etc. Assuming I want to delete all of my partitions so that I have one large volume C: is it best to delete the partitions first and then format? Why would someone do one over the other (or both?) Right now I have a C: partition and a D:RECOVERY partition. I want to delete the D: partition and combine it to the C: partition.Don't they do the same thing? Why do you need to format after you delete a partition ? Do I also delete the C: partition and "re-create" it? What about the term "Unallocated Space"
View 9 Replies
View Related