I have Windows 7 on my main machine and am using a spare drive right now. Power went out and when I turned my computer back on, it wouldn't start so I removed the HDD and plugged it into test computer which was when I found it had become a RAW file system.Alright, so basically I'm wondering how I should convert my RAW drive back into NTFS so I can use it again and I'm not interested in retrieving information as I had nothing of value on that drive, because all important stuff is on my storage drive - which is 1TB in size. I have tried a variety of methods including.
1. Using Disk Management, even though it recognizes it and shows it as a RAW format - I am unable to format it as it gives me a "Format could not be succesfully completed" error message, also deleting and making new partitions has no effect.
2. Tried using DOS to convert it from RAW to NTFS
3. Tried using programs like PTDD Partition Table Doctor and EASUES Partition Master to rebuild the partitions, fix the Master Boot Record and then convert to either FAT32 or NTFS (if it's FAT32 I'll convert it to NTFS afterwards)
4. Tried to format from the "My Computer" window via right-clicking and selecting "Format"
5. According to TestDisk I have 0 partitions and when I do a deep search it forks of a load of read errors. :
As far as I know, PPTD Partition Table Doctor tells me that there sector count is incorrect and that the MBR is in the the wrong section.If you want my system specifications, Here:
Windows 7 64-bit
AMD Athlon X2 6400+ 3.2GH
6GB DDR2 RAM 667
BFG GTX 260 (216) OCX
1TB Green Cavier Western Digital
80GB Seagate Barracuda (Now in RAW format)
I have a second hard drive that is formatted FAT32 and I need to reformat it to NTFS so I can install Windows XP as a dual boot option. It shows 146GB of 148GB free space; however, when I open the drive it says "This folder is empty". I once had Ubuntu installed and reformatted the drive, but it may be hidden somewhere on the drive. I have tried to reformat by right clicking the drive letter and using the format command, but I get an error message "Windows cannot format this drive. Quit any disk utilities or other programs that are using this drive, and make sure no window is displaying the contents of the drive. Then try formatting again.". When I check the drive for contents using CMD it says "Volume in drive is New Volume Directory of D: File Not Found". When I try to format D: from the C: prompt, it says "Access Denied as you do not have sufficient privileges. You have to invoke this utility running in elevated mode." I am logged on as Administrator
on my netbook there is C drive which is FAT 32 and D drive which is NTFS. the thing is i have windows xp dualbooting windows xp (i know its weird). i am only using C drive so i want to format the D drive and merge it with C drive so i can have more space. the thing is it doesnt let me delete it. i tried using Easus Partition manager, but there was no delete option or anything like that. i cant use the CD because mine is a netbook. also booting from USB does not work because my computer is old and it doesnt support booting from usb in BIOS.
I have a new windows 7 64-bit computer and two 4-year old external Western Digital HDDs. They connect fine and transfer data okay except when i try to do a Windows system mirror.All was well with XP Pro and the same HDDs but Windows 7 tells me the HDDs are not formatted to NTFS.Firstly, what does this mean as i would really like a system mirror and secondly, is there a way round it withpout formatting the HDDs and losing all the data?
I had to use my thumb drive to upload files to a Mac, so I reformatted the drive to FAT32. Now I'm trying to get it back to NTFS so I can use again on my Win 7 machine, but the drive is not even showing up in My Computer.
The Drive shows in Device Manager and in Disk Management, but offers me no option to format.
This is an issue with trying to use the Windows Backup utility with an external hard drive (Seagate GoFlex Desk) with more than 2TB of storage (in this case 3TB). I have looked into this and found that this is a common problem related to the backup utility being unable to deal with drives that have a 4kb allocation unit size. The typical advice is to reformat with an allocation size of 512B, which it will be able to work with.
The problem is that Windows will not let me reformat with that size. The smallest unit it allows is 4kb, which is exactly the problem. If I initiate the format dialog on other NTFS drives I have, 512B shows up as an option. Just not on my external. And yet, this solution appears all over the place and people have claimed it solved their problem. I have even (twice) tried creating a second partition on the external (1.5TB and then 1TB), neither has allowed an allocation unit size less than 4k, even though my 1TB internal drive did allow this.
I am not really interested in third party backup or imaging programs. With my old 500GB external, I used the Windows Backup utility to make a few system images and there have been at least two situations where a bad driver or something has resulted in having to go back to a restore point, but finding no suitable ones available, and thus restoring to the backup image. This has been the simplest way of recovering from these disasters and it has worked every time. For normal file backups, I have a number of cloud storage systems and I can use the software Seagate included with the drive. However, the one and only reason I got a hard drive this large is that it would allow me to make a lot of Windows system images, and that is the one thing I am unable to do. I do not understand why I cannot use the one fix everyone online recommends. I have emailed Seagate tech support about this but they have not responded.
just got a new laptop.From thw store where he bought it,the OS of the laptop was an Ubuntu.I tried to install windows 7,but won't let me.I can't access "Format" from the installation process.Down on the windows that is opened when installing windows 7,it says "Windows 7 cannot be installed on this partition because the format is not NTFS,and is not enough space on the disk"The laptop got only 2 partitions 0 and 1,and both of them are out of free space.
I have a triple boot system: XP 32 bit, XP 64 bit, Win7 Pro 64 bit, each on a separate partition on separate hard drives. I can backup each of the XP OS partitions with a program I wrote that basically does a file and folder copy to a folder in a spare partition on one of the hard drives. The copy program I wrote tries to preserve time stamp and short file name info, otherwise, it's just a file and folder copy program. I use windiff to verify after a backup (or restore). For a restore, I can quick format a partition and copy the files back (using the program I wrote).
I tried doing the same with the Win 7 OS partition, backup, quick format, restore, but some of the information (metadata?) is lost. All of the actual data is there, and windiff doesn't show any differences, and Win 7 boots up, but then there are issues. ATI video driver catalyst control center fails to run (don't recall error message). The publisher information for many (or most or all) of the programs is lost, causing User Acess Control dialog box to appear anytime I tried to run a program,which should be Microsoft, but shows up as unknown. Internet Explorer 8 will state that a program has corrupted the default search provider repeatedly (even after selecting one).
So something is different between Win 7 NTFS and Win XP NTFS, or I need to enhance my copy program to copy addtional file information when doing the copies. If I get the time, I'll try a drag and drop from windows explorer in XP to see if that makes any difference.So currently I'm stuck using Win 7 system image backup for the Win 7 OS partition (it also images the C partition which contains the boot files like bootmgr).
Suddenly my computer could just black out, looks like it is turning itself off, but not completely. The fans is still running, but can't use the computer and the screen is black.And yesterday I got a BSOD also. Don't know if this Memory Management issue has something to do with my earlier blackouts, but I hope so. So that there is only 1 thing to fix ;-)Yesterday I ran Memtest86+ for 10 passes and 22 hours. And I got zero errors. See picture.
my monitor turns to black like its going to sleep and then when i check my computer, its still working but freezes after the blackout. I've tried going to control panel and change the power options but it still crashes.It happens when i am searching the net, playing a game,or starting my computer. Any suggestions?? My system is Windows 7 Home Basic, Processor: Intel (R) Core (TM)2 Quad CPU Q8400 @ 2.66 GHz 2.67 GHz, Installed memory (RAM): 2.00 GB and it is a 32-bit Operating system.
If I use a commercial software like Drive Scrubber to clean my HD, will a Win 7 Upgrade Discboot ? I want to eliminate any possible virus/malware. Is there any advantage to using commercial software to format, or is the reinstall format listed in the tutorials as effective? My concern is that Kaspersky Internet Security 2012 (KIS) had corrupted data bases and after removal and reinstallation did not perform well. I could not download anything, e.g. CCleaner and received Certificate Error questions on certain websites. Also, I would like a fresh registry to insure previous programs like Chrome, Firefox, KIS, remnants are eliminated.
Can I format a Hard Drive with Windows 7 using a 2000 format disk. If so, what are the prompts i see and action on boot-up before I use the format C. Done it before but just forgot
I have a few questions and one of them is, what is the difference between an unconditional format and a diskpart's Clean All in the command prompt. When I read their definitions online I don't know what they differ in.
how i can format my pen drive if window 7 and XP is unable to format it. they are saying files are in use. i have kept window xp, photoshop and some other software in it. Now please tell me how can i delete these items or format it.
My computer crashed and then crashed again during the restart. Windows tried the start-up repair, did its self diagnosis and said I have a corrupt ntfs.sys file.How do I fix this? I have looked on the Win7 installation disk but did not find any drivers.
We have. Computer its 2.8ghz 2gb ram 1x2 dimmand 500gb hdd it has BSOD and hasnt worked for a month. NOTHING at all works tried every single way to get in it just says ntfs.sys page fault in nonpaged area i cand download amything do anything it loads to a bsod
i get random BSOD while playing my laptop. after doing some research and updated all my driver. this two causes of BSOD always pop out. my laptop model asus K42Jv, i5,4gb ram,and 64bit OS.
used gparted to copy partition from windows7 laptop to usb ext HD as ntfs partition. iam am able to view files and evrything ok. when i reboot into win7 it sees partition as RAW. its says i need to format it.
Just decided to upgrade from SP3 to 7 today, downloaded, burned and now when i boot from disk. windows loads then an error pops up saying"Windows failed to load because a critical , missing, or corrupt""windowssystem32driverstfs.sys"
I put a new hard drive in my ThinkPad T500 and installed Windows 7. I put the old hard drive, which has Vista installed into an external USB box. I can mount the drive, but there are some folders that I can't access. I also cannot seem to give "Everyone" access, or to take ownership. Is there some simple way to override the NTFS security settings?
Im trying to convert a drive on my laptop from FAT32 to NTFS as recommended by Microsoft baseline security analyzer. When I type in convert E: /fs:ntfs command in the cmd prompt I get a message that I dont have permissions to do so. How, on my own machine do I get permissions or what do I type in to get to root? I know that on Linux machines you type in su to enter password to get to root user but Im not sure how on my own windows machine. I am a 1st year IT student and am learning. I thought I had all the permissions since I am logged into my machine as administrator.
I now have a problem with Win 7 (RTM edition) as follows:
I have SATA1 drive 500gb: 1 Primary, and 5 logical or whatever you call that. Of these, I only see 3 (2 are unassigned letters, and when I try to get there, I get the error "The operation failed to complete because the disk managment console view is not up-to-date. Refresh view by................" (obviously this doesnt work).
I also have the new SATA2 1TB hdd split into 4 partitions (one of them is the OS ones) as well as Disk0 which is older 120gb U-ATA hdd.
Obviously I mean the two rightmost partitions from Disk1.
Also, I copied everything from that partition to another new one using XP, then tried to format it - which failed with some error... anyway tried to format it from this screen as well in 7, but it gave another error: "An unexpected error has occured. Check the system event log blabla.