Can I format a Hard Drive with Windows 7 using a 2000 format disk. If so, what are the prompts i see and action on boot-up before I use the format C. Done it before but just forgot
View 4 RepliesI'm building my first pc and I'm getting blocked right at the gate. I have a 64bit Windows 7 installation disk (home version, "for system builders" ). This is a fresh installation, I don't have any other OSs for this build so my options are limited.
It starts out fine, but when I get to the point where I am to pick a hard drive to install to, it won't accept anything. It will allow me to delete partitions but clicking on "New" or "Format" (under the advanced options) makes it think for a few seconds, then just stop like nothing happened.
I have tried formatting it through gparted, but no matter what I do it complains that the drive has been formatted with in GPT, even when the drive is completely clean and unformatted.
I'm using a Samsung Spinpoint F3 HD103SJ 1tb hard drive
on the MSI P67A-GD65 mobo
with intel i7 2600k.
How to full format my laptop hard drive. I have already Re install windows 7 in E: drive. Previously I have win-7 in C: drive after encounter some problems, Re-install new Windows 7 but that time I didn't format the hard disk that's why its install in drive E. Now when start the up of the lap top both selection are coming will start with old win or new win-7...and having some trouble with my windows 7 that's why I want to full format the hard dive without bootable disk and install new win-7.
View 2 Replies View RelatedI have got a laptop with win 7 on it. There is only one drive in laptop which is C: , I want to wipe the hard disk and install win xp professional on it.1- How can i format the hard disk which has win 7 on it?2- After formating the hard disk, would i able to install the window 7 through recovery disk which i have already made incase anything goes wrong?
View 6 Replies View RelatedDo I need to format my hard disk before installing Windows 7?
View 6 Replies View RelatedI have bought a new laptop (DOS installed) and trying to install windows7 After i installed windows 7, i can see only 30 gb drive in "My computer" (500 gb hard disk) When iam trying to create new volume in disk management on unallocated space iam getting a prompt that "this action will convert the disk to dynamic disk" when i proceeded with clicking ok i get an error message saying "Not enough space on the disk to perform the operation" Even in the windows installation screen iam unable to select the unallocated space and format. I can see the options "format", "delete" disabled for the partitions I can see the options enabled for only few partitions. This is a brand new laptop with DOS installed and iam installing the windows for first time.how can i partition the hard disk and format?
View 3 Replies View Relatedwhat should i do, when i unable to format my external and when i click on xternal it appears the parameter is incorrect
View 3 Replies View Relatedim trying to restore my hp pavilion lap top to factory settings.. while im formating it it always stop at 23%
View 9 Replies View RelatedI am trying to format a 320 GB disk drive as single storage that was once used on a motherboard as a Raid 0 array. I can format the disk drive as NTFS via a USB cable, but when I try and connect the drive internally on the motherboard, the computer does not see it. When I go to disk managment to try and initialize hhe drive, it list the drive as a array and gives me an error. I have tried this a couple times and am at a loss as to hoe to get rid of the "Array" name disk managment says it is.
View 1 Replies View RelatedI have bought a new laptop (DOS installed) and trying to install windows7After i installed windows 7, i can see only 30 gb drive in "My computer" (500 gb hard disk)When iam trying to create new volume in disk management on unallocated spaceiam getting a prompt that "this action will convert the disk to dynamic disk"when i proceeded with clicking ok i get an error message saying "Not enough space on the disk to perform the operation"Even in the windows installation screen iam unable to select the unallocated space and format.I can see the options "format", "delete" disabled for the partitionsI can see the options enabled for only few partitions.This is a brand new laptop with DOS installed and iam installing the windows for first time.
View 9 Replies View RelatedRecently, I'm unaware of what happened to my Hard disc, If I connect it to my laptop or any other PC, it is asking me to format. I cant even open it, cant ready any data from it....If initiated for error check, to start an error check also, it is asking me to format.
View 4 Replies View RelatedAm unable to read or write in my hard disk.. every time it shows msg saying not accessible. i tried to format but even that is not happening. i tried using cmd prompt. but no use.
View 1 Replies View Relatedhow i can format my pen drive if window 7 and XP is unable to format it. they are saying files are in use. i have kept window xp, photoshop and some other software in it. Now please tell me how can i delete these items or format it.
View 1 Replies View RelatedI have a Fantom portable Hard Disk 1 TB.....and I've been using it since 1 Year. Recently, I'm unaware of what happened to it, If I connect it to my laptop or any other PC, it is asking me to format. I cant even open it, cant ready any data from it....If initiated for error check, to start an error check also, it is asking me to format.
View 2 Replies View RelatedI have a 750Gb drive that I would like to reformat so I can use it for backups. When I try to format the drive I am told windows can't format it.
The drive was previously used as a C drive and held an intstalation of Vista. On the drives and Proram and Windows folders. When I tried to delete them I was told I needed permission from trusted installer. I found a "solution" to this on a microsoft site which effectively said to set the owner to the administrator group. I have done this. Now when I try and delete them I am told I need permission from the administrator. I have logged on as the administrator.
Formatting is also still forbidden. The files I want rid of take up 50Gb of space.
I have a LaCie 150 GB hard drive that I backed up all the files onto from my previous computer, a Mac. I now have a Lenovo laptop with Windows 7, and want to transfer some files to it. The hard drive can be seen in Devices, but not in "My Computer." I played around, not really knowing what I was doing, but I added a volume to the device in Computer Management. Now Windows says I need to format this volume before using it, which, obviously, I'm unwilling to do.
View 7 Replies View RelatedI'm here with 8 hd's all blocked, formats need them but I'm not getting or creating a partition because they are blocked, HDD Unlock saw the program but is expensive and is paid
View 1 Replies View Relatedi am using windows 7 os. Actulay i format the system. after formating system whn i login , i am getting msg "windows detected hard disk problem and you may loss datas from ur drive c,d & e" bt my system condition is good.wt should i do for this?hw can i clear this error? pls help me
View 1 Replies View RelatedI can't recover or install a fresh copy, error !disk is write protected or not enabled in bios ! i have checked and double checked , i can not find no password or any thing in the properties
View 6 Replies View RelatedI have 2 hard drives, an SSD for my OS, and a 2nd drive that I store all my files on. I had to do a reinstall this morning, and since I understand Windows 7 has issues installing sometimes when there's 2 discs connected, I disconnected the power and sata cable from my 2nd drive. So I install Windows 7, and it goes fine. I turn off the computer, plug the 2nd drive back in, turn the computer on and see the drive letter, but when I click on it, I get a message "You need to format the disc before you use it". I go into disc management and it's listed there as well, but the File System is listed as Raw.
Since Windows 7 only takes 15 minutes to install on the SSD I use, I decided to install it once again but leaving the 2nd drive connected this time. My BIOS recognizes that the disc is there, as does windows. It's just telling me it's in RAW right now, and I have no clue how that happened. Oddly enough I even made an UBUNTU disc and booted to that...but from UBUNTU that 2nd drive doesn't even show up, it only recognizes the existence of my primary hard drive.
750 Samsung portable device. Problems seems to sort itself out eventually but it keeps firing up prompts to format the drive before I can use it. First time it happened I had to unplug it, restarted and then it was OK. It just did it again and then again when I restarted, took a minute or two but eventually it read the drive and it was ok. Why is this happening and what can I do to stop it? Might it be a power issue? I have the device connected via a USB 2.0 port, through an extension lead and then through a 4 way splitter. I have had problems with this splitter before I think, but not with the small connector. Maybe I can try connecting it through one of the other ports and see if it still has the same problem.
View 8 Replies View RelatedSo I've assembled a new desktop pc with a brand new Western Digital Green 1TB SATA hard drive. BIOS detects the hard drive and I pop in the Windows 7 DVD and go through the installation process until the screen that asks where I want to install Win 7 on the hard drive.
I try to format the drive but it gives me an error saying that the drive has to be in "read-only" mode and that I need to do so. That prevents me from progressing through the installation process.
I got no idea what that means and there is no extra pc around to format the new HDD on. Obviously there is no OS installed on the drive so I can format it inside Windows. That HDD is the only hard drive connected to the pc.
Specs: AMD Phenom II 1055T, 6 GB RAM, GTX460 HAWK
if i format my hard drive is there any way to keep windows 7
View 5 Replies View Relatedi have laptop reinstalled with windows 7, it doesnt work properly, cos ram is 1GB only, i want to reinstall windows xp now, but it does not allow me to do that.
message comes that newer version is installed on this machine and it is not letting me to install windows xp.
Can I format the hard drive on my pre bought windows 7 and put windows xp on it instead because my processor cant handle windows 7, i think it would just be faster, what do you think?
View 21 Replies View RelatedI have to format hard drive, after format an I get back my window 7 operating files by a recover software
View 2 Replies View RelatedWhen I try to access drive D it says this "you need to format the disk in drive d before you can use it". I don't even know whats in Drive D, my computer is new. But when I right click properties for used space it says 0 bytes and free space 0 bytes. But it still says its full. [URL]. After I press cancel [URL]. Drive Space [URL]. What should I do?
View 14 Replies View RelatedEvery 5 minutes or so , a pop up saying "You need to format the disk in drive g before you can use it" comes up. Problem is, I have no disk in drive g, and nothing connected to my usb ports. So i have no idea what this means. Add to this that the device manager keeps refreshing and will not let me click anything.
View 3 Replies View RelatedI am getting this popup: "You need to format the disk in drive x before you can use it". In my case it's drive H:. I have unchecked "Use AutoPlay for all media and devices" in the Control Panel. I did this a week ago when I started getting these popups and it seemed to work till today when it all started up again. I just noticed that the popup is not appearing, but the drive is appearing and disappearing from my file manager (I use Q-dir).
View 7 Replies View RelatedThis weekend a installed the windows 7 64bit over a vista 32bit. During the installation I left my Samsung S2 HD 500gb plugged in.After the installation the windows didn't find a mass storage controller drive and my HD appeared as Local Drive ( F: ). When I try to access it, this msg comes up: you need to format the disk in drive f before you can use it. I tried plugging in all usb port I could find. And even the win xp 32bit showed the same msg. I also tried the "Easy Recovery Pro". But it didn't worked. When a click on any of the recovery option the software doesnot find any hard drive in my pc. Then I tried the "GetDataBack for NTFS". After 24 hours of scanning, it didn't find any of my files. Tonight, I will try the "diskdigger" and the "Recuva". But I am not putting too much faith on those software due some post I read here. I really need to recover same work data.
View 9 Replies View RelatedI got a new SSD and I wanted to run my OS off of there, so I installed Win 7 on the new SSD and everything was fine. I still had my old hard drive installed for storage, but once I finished with it I went ahead and formatted that drive.
Now I'm getting a "this copy of Windows is not genuine" spam and not sure what to do about it.