After Windows 7 Reinstall - 2nd Hard Drive Is In RAW Format
Feb 7, 2011
I have 2 hard drives, an SSD for my OS, and a 2nd drive that I store all my files on. I had to do a reinstall this morning, and since I understand Windows 7 has issues installing sometimes when there's 2 discs connected, I disconnected the power and sata cable from my 2nd drive. So I install Windows 7, and it goes fine. I turn off the computer, plug the 2nd drive back in, turn the computer on and see the drive letter, but when I click on it, I get a message "You need to format the disc before you use it". I go into disc management and it's listed there as well, but the File System is listed as Raw.
Since Windows 7 only takes 15 minutes to install on the SSD I use, I decided to install it once again but leaving the 2nd drive connected this time. My BIOS recognizes that the disc is there, as does windows. It's just telling me it's in RAW right now, and I have no clue how that happened. Oddly enough I even made an UBUNTU disc and booted to that...but from UBUNTU that 2nd drive doesn't even show up, it only recognizes the existence of my primary hard drive.
I can't recover or install a fresh copy, error !disk is write protected or not enabled in bios ! i have checked and double checked , i can not find no password or any thing in the properties
I am trying to format my hard drive and reinstall windows 7 as my hard drive is running out of memory tried removing some programs but is not doing much my hard drive is 232GB I only have 28GB left, how to format my hard drive.
It's time to format my hard drive. It hasn't been formatted since 2008 when it was bought and it's having some major issues.I made a system image. when i was installing it, I couldn't check the option to "get rid of the partitions and format the hd". It requested the drivers, asked me to insert the disc, but I don't have any disc with the drivers
Can I format a Hard Drive with Windows 7 using a 2000 format disk. If so, what are the prompts i see and action on boot-up before I use the format C. Done it before but just forgot
The hard drive on my Toshiba Satellite crashed. I made the backup discs when the computer was new, but evidently made them through the Toshiba backup rather than Windows backup. Now my recovery discs want to access the hard drive partition to reinstall Windows 7 which it cannot do.
How can I install the Windows 7 OS onto my new hard drive? I have the product code on the back of my computer, but how can I get Windows 7 to install without having to purchase it again?
I intend to sell my computer soon, but before doing so I'd like to clear the hard drive and remove all my personal data. I've done a bit of research on the topic and found a few programs (DBAN, Eraser) that seem to do this. I'm not exactly sure which program is best though, or what exactly they do. I would also like to reinstall Windows 7 after erasing the hard drive. However, my copy of Windows 7 is an upgrade from the computer's original OS, Windows Vista. The computer didn't come with any system recovery or OS install disks so I'm not sure how to boot and install and OS after erasing everything. Will I be able to just put in the Windows 7 upgrade disk and install it? (I can't imagine it could be that simple, but who knows!) I do kind of remember a "clean install option" when I upgraded - would that be the same as clearing the hard drive and reinstalling?
I have a 750Gb drive that I would like to reformat so I can use it for backups. When I try to format the drive I am told windows can't format it.
The drive was previously used as a C drive and held an intstalation of Vista. On the drives and Proram and Windows folders. When I tried to delete them I was told I needed permission from trusted installer. I found a "solution" to this on a microsoft site which effectively said to set the owner to the administrator group. I have done this. Now when I try and delete them I am told I need permission from the administrator. I have logged on as the administrator.
Formatting is also still forbidden. The files I want rid of take up 50Gb of space.
I have a LaCie 150 GB hard drive that I backed up all the files onto from my previous computer, a Mac. I now have a Lenovo laptop with Windows 7, and want to transfer some files to it. The hard drive can be seen in Devices, but not in "My Computer." I played around, not really knowing what I was doing, but I added a volume to the device in Computer Management. Now Windows says I need to format this volume before using it, which, obviously, I'm unwilling to do.
I am trying to help a friend out with his Sony Vaio E Series Laptop. The computer had crashed and he tried to do a clean install of windows but it failed and nothing would respond. Even when you tired to do a clean install of windows again it just went to the light blue windows screen with the bird and nothing happened. So I used Dban to Wipe the hard drive clean and start over from scratch. After I wiped it I tried to reinstall windows and it says there are no signed device drivers found. So I checked the bios and it's not even registering the hard drive. I have been searching the boards everywhere to find a solution to this. The Bios does not allow for much change so I can not make sure it is set to a SATA connection and I have tried turning off the signed device option when starting up. Nothing is working.
I am planning on building myself a new computer and I am using the same hard drive as I am currently and I wanted to reinstall win 7 and clear my hard drive to have a new start as my hard drive is currently full of junk .So I was wondering if I reinstall win 7 on the same hard drive will the copy still work or will I have to buy a new license/serial key.
750 Samsung portable device. Problems seems to sort itself out eventually but it keeps firing up prompts to format the drive before I can use it. First time it happened I had to unplug it, restarted and then it was OK. It just did it again and then again when I restarted, took a minute or two but eventually it read the drive and it was ok. Why is this happening and what can I do to stop it? Might it be a power issue? I have the device connected via a USB 2.0 port, through an extension lead and then through a 4 way splitter. I have had problems with this splitter before I think, but not with the small connector. Maybe I can try connecting it through one of the other ports and see if it still has the same problem.
So I've assembled a new desktop pc with a brand new Western Digital Green 1TB SATA hard drive. BIOS detects the hard drive and I pop in the Windows 7 DVD and go through the installation process until the screen that asks where I want to install Win 7 on the hard drive.
I try to format the drive but it gives me an error saying that the drive has to be in "read-only" mode and that I need to do so. That prevents me from progressing through the installation process.
I got no idea what that means and there is no extra pc around to format the new HDD on. Obviously there is no OS installed on the drive so I can format it inside Windows. That HDD is the only hard drive connected to the pc.
i have laptop reinstalled with windows 7, it doesnt work properly, cos ram is 1GB only, i want to reinstall windows xp now, but it does not allow me to do that. message comes that newer version is installed on this machine and it is not letting me to install windows xp.
Can I format the hard drive on my pre bought windows 7 and put windows xp on it instead because my processor cant handle windows 7, i think it would just be faster, what do you think?
I got a new SSD and I wanted to run my OS off of there, so I installed Win 7 on the new SSD and everything was fine. I still had my old hard drive installed for storage, but once I finished with it I went ahead and formatted that drive.
Now I'm getting a "this copy of Windows is not genuine" spam and not sure what to do about it.
I'm building my first pc and I'm getting blocked right at the gate. I have a 64bit Windows 7 installation disk (home version, "for system builders" ). This is a fresh installation, I don't have any other OSs for this build so my options are limited.
It starts out fine, but when I get to the point where I am to pick a hard drive to install to, it won't accept anything. It will allow me to delete partitions but clicking on "New" or "Format" (under the advanced options) makes it think for a few seconds, then just stop like nothing happened.
I have tried formatting it through gparted, but no matter what I do it complains that the drive has been formatted with in GPT, even when the drive is completely clean and unformatted.
I'm using a Samsung Spinpoint F3 HD103SJ 1tb hard drive on the MSI P67A-GD65 mobo with intel i7 2600k.
If I use a commercial software like Drive Scrubber to clean my HD, will a Win 7 Upgrade Discboot ? I want to eliminate any possible virus/malware. Is there any advantage to using commercial software to format, or is the reinstall format listed in the tutorials as effective? My concern is that Kaspersky Internet Security 2012 (KIS) had corrupted data bases and after removal and reinstallation did not perform well. I could not download anything, e.g. CCleaner and received Certificate Error questions on certain websites. Also, I would like a fresh registry to insure previous programs like Chrome, Firefox, KIS, remnants are eliminated.
How to full format my laptop hard drive. I have already Re install windows 7 in E: drive. Previously I have win-7 in C: drive after encounter some problems, Re-install new Windows 7 but that time I didn't format the hard disk that's why its install in drive E. Now when start the up of the lap top both selection are coming will start with old win or new win-7...and having some trouble with my windows 7 that's why I want to full format the hard dive without bootable disk and install new win-7.
i just installed windows 7 on my computer and now i have only 11 GB HHD left out of 80 GB...
is there anyway i could reinstall it??? and if i reinstall it can i still use my product key. i already activated it, so am i going to have a problem re-activating again?
I have 2 format programs recommended by GEEK, easus and mini tool partition...they will not allow me to do partition...The disk layout is C: system and files D: hp recovery data E:hp files...When I start I can do resize and get an allocated file, then on the allocated file I click create and then I get message this is not a primary, and I cannot find a way to change it....and if I use the other program(mini) it says there is no boot files.
I am doing a fresh install of Windows. I have done this before with XP, but the options are a little different on the Windows 7 DVD. What I am concerned about is the ability to format C Drive with a "Full Format" rather than a "Quick Format". The XP disk would give the user an option, but the Windows 7 dvd does not - it just has "Format" and appears to only do a quick format. How can I do a "Full Format" of C then install the Windows 7 on it?
