Format Hard Drive And Reinstall The Same System Image?

Jan 27, 2012

It's time to format my hard drive. It hasn't been formatted since 2008 when it was bought and it's having some major issues.I made a system image. when i was installing it, I couldn't check the option to "get rid of the partitions and format the hd". It requested the drivers, asked me to insert the disc, but I don't have any disc with the drivers

View 12 Replies


ADVERTISEMENT

Can't Reinstall Windows 7 Or Format The Hard Drive?

Jun 30, 2011

I can't recover or install a fresh copy, error !disk is write protected or not enabled in bios ! i have checked and double checked , i can not find no password or any thing in the properties

View 6 Replies View Related

After Windows 7 Reinstall - 2nd Hard Drive Is In RAW Format

Feb 7, 2011

I have 2 hard drives, an SSD for my OS, and a 2nd drive that I store all my files on. I had to do a reinstall this morning, and since I understand Windows 7 has issues installing sometimes when there's 2 discs connected, I disconnected the power and sata cable from my 2nd drive. So I install Windows 7, and it goes fine. I turn off the computer, plug the 2nd drive back in, turn the computer on and see the drive letter, but when I click on it, I get a message "You need to format the disc before you use it". I go into disc management and it's listed there as well, but the File System is listed as Raw.

Since Windows 7 only takes 15 minutes to install on the SSD I use, I decided to install it once again but leaving the 2nd drive connected this time. My BIOS recognizes that the disc is there, as does windows. It's just telling me it's in RAW right now, and I have no clue how that happened. Oddly enough I even made an UBUNTU disc and booted to that...but from UBUNTU that 2nd drive doesn't even show up, it only recognizes the existence of my primary hard drive.

View 9 Replies View Related

System Image On External Hard Drive Is Not Accessible While Restoring PC From Image

Sep 4, 2011

OS: Windows 7 Home Premium 32 bit The windows system image backed up on my external hard drive (2TB WD USB3) is not showing while restoring the PC from an image.

The only option available is my hard drive partition on which i also had saved a system image. Though windows recommends External hard drive for backing up image when backing up the system.

View 4 Replies View Related

Hard Drive Running Out Of Memory - How To Format And Reinstall Windows 7

May 8, 2011

I am trying to format my hard drive and reinstall windows 7 as my hard drive is running out of memory tried removing some programs but is not doing much my hard drive is 232GB I only have 28GB left, how to format my hard drive.

View 9 Replies View Related

How To Format / Wipe Hard Drive To Reinstall Windows 7 As 32bit

Jul 19, 2012

I need to know how to wipe/format the hard drive to be able to re-install Windows 7 as 32bit.

View 3 Replies View Related

Format/wipe The Hard Drive To Reinstall Windows 7 As 32bit?

Jul 19, 2012

how to wipe/format the hard drive to be able to re-install Windows 7 as 32bit.

View 1 Replies View Related

System Image - Hard Drive Clone?

Apr 12, 2012

I am stack at certain process while trying to load a system image onto new hard drive using Windows 7 x64 image restore function from the windows 7 disk, I got my primary drive 500 gigs with windows 7 and all my files,I made a system image onto another clean internal hard drive size 160 gigs and I was successful, now I disconnected my 500 gigs primary hard drive, attached a new 250 gig hard drive and I proceeded to load the system image, I boot to windows 7 cd,I get the option to repair , click on restore from system image file , everything looks good computer finds the hard drive 160 gigs with the system image as source,I press next look for the target drive and I see it there 250 gigs drive thats freshly formatted ..., I select the target press next it all looks good and then I get the screen that there is no target hard drive... I made sure that this hard drive is not being excluded from format and new process... I am lost ... what am I doing wrong here, I reformatted those 2 drives twice I tried this operation about 8 times , I get the error message each time I am attempting to create this new system image..

View 9 Replies View Related

How To Format System Hard Drive With Windows 7

Feb 27, 2012

i have laptop reinstalled with windows 7, it doesnt work properly, cos ram is 1GB only, i want to reinstall windows xp now, but it does not allow me to do that.
message comes that newer version is installed on this machine and it is not letting me to install windows xp.

View 15 Replies View Related

Installed A New Hard Drive But Can't Get System Image Restored?

Nov 10, 2011

I just installed a new hard drive after my previous one failed to start up. I have a backup image stored on an external WD Passport. The install went well. I turn on my tower with the Windows 7 recovery disc in, start up System Image Restore and plug in my Passport. The system restore recognizes my Passport and when I go through the wizard to reformat and partition the disk to match the layout of the recovery image, I get an error message saying "The system image restore failed. No disk that can be used for recovering the system disk can be found. *hyperlink* Details."Details states, "No disck that can be used for recovering the system disk can be found. Try the following: 1) A probable system disk may have been excluded by mistake. a. Review the list of disks that you have excluded from the recovery for a likely disk. b. Type LIST DISK command in the DISKPART command interpreter. The probable system disk is usually the first disk listed. c. If possible,, remove the disk from the exclusion list and then retry the recovery.Tried that, my disk is not listed as an exclusion.2) A USB disk may have been assigned as a system disk. a. Detach all USB disks from the computer. b. Reboot into Windows Recovery Environment then reattach USB disks and retry the recovery.

View 1 Replies View Related

System Image Backup Failed (on Same Hard Drive) - Error 0x80042407

Feb 26, 2012

I have 2x160gb intel SSD disks running as RAID0. Recently my motherboard had failed and I replaced it with new one (different model). Couldn't access OS because apparently some RAID data is kept on the motherboard and that was gone, so I decided to use a backup. Booted from windows 7 installation disk and selected backup,

I click on 'repair', get to the 'select a system image backup'. Select 'use the latest available system image (recommended). Click 'next' I get the message 'all disk to be restored will be formatted and replaced with the layout and data in the system image'. Click Yes. But then got an error saying:

"The system image restore failed. The disk that is set as active in BIOS is too small to recover the original system disk. Replace the disk with a larger one and retry the restore operation. (0x80042407)"

Disk is completely empty with only 1 partition (deleted all partitions and reformatted and then created one). Before motherboard problem I had several partitions, but I imagine that restore would recreate them. Why do I get 'disk to small error' when I am restoring on the same disk? RAID configuration problem? Could stripe size be an issue here?

My OS: Windows 7 64 Professional

View 1 Replies View Related

Western Digital 1021 2TB Hard Drive / No File System And Can't Format?

Feb 5, 2012

So I bought a used 2 TB Hard drive and it supposedly was only used a couple of times and I got a good deal.I plugged it in and the software was installed successfully but it doesn't show up in the explorer with a drive letter. Now when I go to the device manager it does show up but I am not able to format it or give it a letter etc. Also like I said in the title it doesn't have a fat32 or NTFS File System.The hard drive I right clicked is the one I am talking about.

View 4 Replies View Related

Format A Hard Drive With Windows 7 Using A 2000 Format Disk?

Aug 29, 2012

Can I format a Hard Drive with Windows 7 using a 2000 format disk. If so, what are the prompts i see and action on boot-up before I use the format C. Done it before but just forgot

View 4 Replies View Related

Extracting Files From System Image. Format Disk?

Jun 17, 2012

Computer management -> Disk management -> attach VHD The VHD attaches fine, and it is the correct file. But when it attaches I get the message: "you need to format the disk in drive F: before you can use it. Do you want to format it?" I clicked cancel, and then tried to right click -> explore. I then got the message: "F: is not accessible. The file or directory is corrupted and unreadable."Out of all the tutorials I have read, the file should open just fine and let me explore it. Why is it asking me to format the disk? And is it safe to do so?The file system is listed as "RAW" and the status is "Healthy(primary partition)"I don't want to lose everything on the system image! Can I/should I format the disk?

View 2 Replies View Related

Want To Format C Drive And Reinstall Windows 7 Through Recovery Disc

Oct 3, 2012

FORMATING my C drive and how to reinstall windows 7 again with the help of recovery disc.

my computer was formated and windows were reinstalled but it was not done by me. I have the recovery discs provided by the hp laptop company.

i have windows 7 home premium 64 bit.My device is HP DV6 6121tx

View 4 Replies View Related

Any Advantage To Using Commercial Software To Format / Reinstall Format Listed In Tutorials As Effective

Oct 21, 2011

If I use a commercial software like Drive Scrubber to clean my HD, will a Win 7 Upgrade Discboot ? I want to eliminate any possible virus/malware. Is there any advantage to using commercial software to format, or is the reinstall format listed in the tutorials as effective? My concern is that Kaspersky Internet Security 2012 (KIS) had corrupted data bases and after removal and reinstallation did not perform well. I could not download anything, e.g. CCleaner and received Certificate Error questions on certain websites. Also, I would like a fresh registry to insure previous programs like Chrome, Firefox, KIS, remnants are eliminated.

View 2 Replies View Related

Hard Disk Giving Error After System Format

Dec 26, 2011

i am using windows 7 os. Actulay i format the system. after formating system whn i login , i am getting msg "windows detected hard disk problem and you may loss datas from ur drive c,d & e" bt my system condition is good.wt should i do for this?hw can i clear this error? pls help me

View 1 Replies View Related

Hard Drive Space - Reinstall

Mar 3, 2009

i just installed windows 7 on my computer and now i have only 11 GB HHD left out of 80 GB...

is there anyway i could reinstall it??? and if i reinstall it can i still use my product key. i already activated it, so am i going to have a problem re-activating again?

View 9 Replies View Related

Cannot Format Hard Drive

Sep 11, 2012

I have 2 format programs recommended by GEEK, easus and mini tool partition...they will not allow me to do partition...The disk layout is C: system and files D: hp recovery data E:hp files...When I start I can do resize and get an allocated file, then on the allocated file I click create and then I get message this is not a primary, and I cannot find a way to change it....and if I use the other program(mini) it says there is no boot files.

View 9 Replies View Related

Can't Format The Hard Drive

Jul 2, 2009

installing build 7264.

mounted the ISO in magic disk and did custom installation.

the only options is load driver and i see the partition but i can't format it.

what to do?

View 8 Replies View Related

How To Format Hard Drive With Win 7 Cd ?

Jan 3, 2010

I am doing a fresh install of Windows. I have done this before with XP, but the options are a little different on the Windows 7 DVD. What I am concerned about is the ability to format C Drive with a "Full Format" rather than a "Quick Format". The XP disk would give the user an option, but the Windows 7 dvd does not - it just has "Format" and appears to only do a quick format. How can I do a "Full Format" of C then install the Windows 7 on it?

View 2 Replies View Related

Format Hard Drive Using Win 7

Jan 21, 2010

would like to know the easiest way to format my old hard drive using windows 7 64bit. so that im able to install windows7?

View 3 Replies View Related

Create System Image Won't Detect External Hard Disk?

Feb 27, 2012

This isnt the first time i use the windows backup to create a system image, ive done it before using this external hdd with no problems at all.But now, for some reason it wont detect this hard drive, it only gives me the option to store the image on a dvd, i dont know why?, i tested the hard drive on a different computer and IT WORKS, i tried to create an image and it does work.

View 5 Replies View Related

Using System Image To Replace 750GB Drive With S 500GB Drive?

Sep 17, 2012

My 750gb hard disk is failing on a HP laptop that came preloaded with Windows 7 home prem. I have a SMALLER excellent 500gb, 7200 rpm hard disk that I'd like to replace the failing hard disk with. I've read that my Windows 7 System Repair DVD will not restore my recent system image (on NAS) to a smaller partition. The C:partition on the failing drive is well over 600gb but can shrink to 300gb. QUESTION Can I restore a system image from my larger drive "as is". If not, and I shrink my C: partition (contain windows) ay 350GB will I be able to restore the system image to where windows will boot?I have an old copy of (7.0) partition magic that I used to resize partitions on XP machines Can this old 32 bit partition magic safely resize my C: partition. If so, and I create a new system image can I restore it to the new disk?

View 5 Replies View Related

Upgrading Hard Drive On A Solid State/Hard Drive System?

Oct 25, 2011

So, I have a i7 2600K system with a solid state disk as the boot drive, and an older (c2008) Samsung Spinpoint F3 500GB drive as the data drive for programs (that I deem as not worthy of the quick load times). The hard drive has given me some errors over time, and I bought a hard disk to replace it (a Hitachi 1TB). The issue I'm having is that the fact that Windows 7 puts a small (100MB) partition on the F3, and for some reason, even though I'm running Acronis 2012, it doesn't seem to be able to clone the F3 over to the Hitachi. I've also tried Drive XML, and for my 2 hour wait, I only managed to acquire a boot error. Thankfully, I've not done anything rash to destroy the data on the F3, but given the fact that I've seen corrupted files in Steam from that drive, I'm not will to trust it long term with my data. I really need to get the data onto that Hitachi, though... Anyone have any advice for upgrading the HDD in a SSD/HDD system? I don't really feel like it should be so hard, especially if I've bought Acronis True Image, but maybe they haven't designed their product to handle this scenario quite yet? 

View 9 Replies View Related

Windows 7 Reinstall When Hard Drive Crashed?

Apr 12, 2012

The hard drive on my Toshiba Satellite crashed. I made the backup discs when the computer was new, but evidently made them through the Toshiba backup rather than Windows backup. Now my recovery discs want to access the hard drive partition to reinstall Windows 7 which it cannot do.

How can I install the Windows 7 OS onto my new hard drive? I have the product code on the back of my computer, but how can I get Windows 7 to install without having to purchase it again?

View 2 Replies View Related

How Wipe Hard Drive To Reinstall Windows 7

Nov 7, 2011

I want to leave my Hard Drive Like NEW

View 2 Replies View Related

Erase Hard Drive And Reinstall Windows 7?

Jul 15, 2010

I intend to sell my computer soon, but before doing so I'd like to clear the hard drive and remove all my personal data. I've done a bit of research on the topic and found a few programs (DBAN, Eraser) that seem to do this. I'm not exactly sure which program is best though, or what exactly they do. I would also like to reinstall Windows 7 after erasing the hard drive. However, my copy of Windows 7 is an upgrade from the computer's original OS, Windows Vista. The computer didn't come with any system recovery or OS install disks so I'm not sure how to boot and install and OS after erasing everything. Will I be able to just put in the Windows 7 upgrade disk and install it? (I can't imagine it could be that simple, but who knows!) I do kind of remember a "clean install option" when I upgraded - would that be the same as clearing the hard drive and reinstalling?

View 5 Replies View Related

2TB Hard Drive Format Time?

Feb 3, 2012

I got a Western Digital 2TB Green Hard Drive and for some reason I can't seem to format it properly. I used Windows Disk Management and Partition Wizard and on one it takes a long time to format and on Partition Wizard, it stops at 90% complete and then just hangs there. Is this a bad drive or what should I do to format it?

View 3 Replies View Related

Windows 7 Won't Let To Format A Hard Drive

Sep 15, 2012

I have a 750Gb drive that I would like to reformat so I can use it for backups. When I try to format the drive I am told windows can't format it.

The drive was previously used as a C drive and held an intstalation of Vista. On the drives and Proram and Windows folders. When I tried to delete them I was told I needed permission from trusted installer. I found a "solution" to this on a microsoft site which effectively said to set the owner to the administrator group. I have done this. Now when I try and delete them I am told I need permission from the administrator. I have logged on as the administrator.

Formatting is also still forbidden. The files I want rid of take up 50Gb of space.

View 2 Replies View Related

Format A Hard Drive To ExFAT?

Jan 15, 2013

I'm currently trying to format a hard drive to exFAT. It's not my main one it will be used for sharing files on my home network. Apparently you can do it just by right clicking the drive and choosing format however I just have the NTFS option, I don't have exFAT. Is there something else I need to do or get so I can format it?

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved