Computer management -> Disk management -> attach VHD The VHD attaches fine, and it is the correct file. But when it attaches I get the message: "you need to format the disk in drive F: before you can use it. Do you want to format it?" I clicked cancel, and then tried to right click -> explore. I then got the message: "F: is not accessible. The file or directory is corrupted and unreadable."Out of all the tutorials I have read, the file should open just fine and let me explore it. Why is it asking me to format the disk? And is it safe to do so?The file system is listed as "RAW" and the status is "Healthy(primary partition)"I don't want to lose everything on the system image! Can I/should I format the disk?
It's time to format my hard drive. It hasn't been formatted since 2008 when it was bought and it's having some major issues.I made a system image. when i was installing it, I couldn't check the option to "get rid of the partitions and format the hd". It requested the drivers, asked me to insert the disc, but I don't have any disc with the drivers
Using preinstalled Win 7 Home Premium 64bit on an HP 6813w Pavilion. The original hard drive, a Hitachi HDS721010CLA332 1Tb crashed.1) System Recovery discs was made along with a System Recovery with System Image disc.2) A more current System Image was made on an external hard drive.The Hitachi was replaced with the same model. Checked bios to make sure it was installed correctly.Under System Recovery, Image Restore, Select a System Image Backup there is nothing in the table to choose from as far as a source (disc drive or external drive).A) System Recovery (3 discs) has the HP preinstall file folder on the 3rd disc but is not read by the System Recovery program.B) Under System Restore, Image Restore, Advanced, it asks for a network or driver to be installed. That opens up the directory of C: which is the external hard drive. Under WindowsImageBackup the computer name is identified followed by three entries:[CODE]It seems to me the Recovery and System Restore discs are not functional. Am not a technical person but I have taken this as far as I know how at this point.Printed out all the instructions from HP and Microsoft to follow step by step but the failed discs will not allow me to move forward.
I am using win 7 ( Home premium ).My ram is 2GB .I use my PC alot with some heavy programs .So my system is slow down. I want to use Win XP .But Win 7 cant install win XP .I have read some internet page.They said I must format my system disk to install win XP .I dont know how to format this.
I recently reinstalled windows 7 and the programs that I like and created a system image which I burned to a blu-ray and also placed on an external HDD.I just purchased a 120 GB SSD to replace my 250 GB old-skool hard drive which contains my windows installation.Can I use the system image to reinstall windows to the new SSD or would it be better to do a fresh install? Does windows configure itself differently during setup on a SSD rather than a traditional HDD? If so, will that cause any problems by restoring the image onto the SSD?I only ask because using the system image to reinstall everything would go a lot faster than reinstalling windows + all the programs I included on the recovery image.
i recently bought a new hard drive to put my os on, and i stupidly changed my old hard drive type from basic to dymainic, and its not letting me reformat it or convert it back to basic. When i try it says "Windows cannot format the system volume on this disk."
when I have had the PC on to update or back it up it has rebooted itself. No one else uses this computer but me so I am unsure what is going on with it. Can someone give me some kind of idea where to stat on this problem?
I have a hp dv 9700 laptop that has crash, I have being experiences a few problems recently and have manage to fix it my self when it crash before with system repair disk that I brought of the internet. The following message keep on coming up when booting A Disk Read Error Occurred. I think I might of mess the laptop up buy setting the setting as default throw bios, I am looking for free software that I can download on a disk or usb and then reformat it or try to repair it via a system repair disk, I am aware there are software that you have buy over the net, but I believe in doing the job yourself free.
i am using windows 7 os. Actulay i format the system. after formating system whn i login , i am getting msg "windows detected hard disk problem and you may loss datas from ur drive c,d & e" bt my system condition is good.wt should i do for this?hw can i clear this error? pls help me
This isnt the first time i use the windows backup to create a system image, ive done it before using this external hdd with no problems at all.But now, for some reason it wont detect this hard drive, it only gives me the option to store the image on a dvd, i dont know why?, i tested the hard drive on a different computer and IT WORKS, i tried to create an image and it does work.
I have this laptop with Windows 7 as the operating system and with a capacity of 500 GB. My HDD was making loud noises and weird noises so I brought it to the shop and they told me to change the HDD because it might die anytime. So I did a full backup on my external hard disk, meaning that I cloned my laptop. I changed my 500gb HDD with a 240gb SSD. And when I tried to restore my backup files into the new drive, there's an error: "no disk that can be used for recovering the system disk can be found".
So I did some research on the internet and found out the reason of the error: it's because the image created was from a bigger drive than the new drive I put into my laptop. Even though my backup files are only about 100gb, I still cant restore it to my 240gb SSD because the image created was from my 500gb HDD. I am going to copy my backup files into an external hardisk with a capacity of 200gb and then backup from that drive and then I will restore it into my 240gb SSD. Will the backup file be considered as a backup from the 200gb drive or from the original 500gb HDD?
I don't know if this is a harware issue with my SSD, disk controller (motherboard), power supply or something else, but depending on what I'm doing, the computer will operate for a few minutes then freeze and eventually reboot itself. When it reboots, I get the "Bootmgr is Missing" message until I cycle power a couple of times. I've tried booting from the Windows 7 repair disk and typing "bootrec /fixboot", but the problem eventually returns.I can't get a full image update from Acronis because it hangs in the middle of the image, even if I say to ignore bad sectors. If I run the HDTune diagnostic on the SSD, it seems to always stop after about 3 minutes and always in the same spot, at 15,432MB. Is this a problem with the SSD or the disk controller?
Configuration:
O/S: OS Microsoft Windows 7 Ultimate (6.1.7601 Service Pack 1 Build 7601) Motherboard: Gigabyte GA-MA78LMT-S2 CPU: AMD Phenom(tm) II X4 840 Processor, 3200 Mhz, 4 Core(s), 4 Logical Processor(s) BIOS Version/Date:Award Software International, Inc. F13, 8/31/2010 SSD:Microcenter SSD G2 series 64GB ATA Device HDD:Hitachi HDS721010CLA332 ATA Device (1TB) RAM:8GB
Trying to figure out why everything I have tried to download is unsuccessful because there are plug-ins missing or else they need extracting and I can't figure out how the heck to do the extraction thing and it is seriously stressing me because I got stuff I need to do and all I'm doing is spending time trying to get the software i need to do my "stuff" but I can't because they all need extracting.Used to be you just downloaded something and it installed and that was that. How the heck did I end up with this program thing that has tools including extraction and lists all the sub files? Where did it come from? it doen't say what it is so i tried to get a screenshot of it and attach it here but the attachment wouldn't work and so then I lost all what I typed looking for that and now I'm back retyping and i'm being technologically challenged and up until today I never though maybe I have alzheimers because i'm getting nowhere?
I have an external harddisk that is encrypted using TrueCrypt. Each time I plug it in Windows prompts me to format the disk because it doesn't have any recognizable file system. Vista didn't use to do this. I suppose it's because of the UAC changes and a user couldn't normally do this in Vista. How to disable this prompt in Windows 7?
I got me a new 1TB HD and Windows 7 Pro 64 bit (not USB install, actual new DVD. I was trying to install it. The initial parts were painfully slow but they worked.I got to the part where it Copies Files. Then it goes to Extracting Files and it stayed at 0% for about an hour (before I gave up). I could still move the mouse and I clicked on cancel (and then it did very little again).
I have backed up all the files and emails from a faulty hard drive before inserting a new one and setting up Windows on it. However, because the drive was in such a bad way, I did't run Outlook to extract the email account settings - and now realise that these are hidden in the registry. I have tried importing the registry files (after doing some research on this), but cannot find the registry section which contains it.
Now that the the new drive is fully running (apart from the email account settings) - Windows Vista upgraded to Windows 7 - would it be too risky to re-insert the drive in the laptop to run Outlook and get the settings recorded ? I am concerned that it will cause error messages when I re-insert the brand new drive. I have thought about booting up a computer from the faulty drive, but think it may refuse to load because it's a different PC to one it came out of (Dell XPS M1530) - is this the case ?
I am trying to extract the files from Sysinternals Suite to my command directory in the System 32 file. However, WinRAR keeps giving me the diagnostic message "Cannot create blah.exe Access is denied". And I am running as the administrator. Is there any work around to this?
I have what I thought should be a relatively straightforward question: What do I type in the command prompt in Windows 7 to extract all the files from inside an .exe? I remember doing it once a long while back, but I forgot how and Google is being especially unhelpful.One result instructed me to navigate to the file's location and type:
filename.exe /A /P C:destinationfolder
but that didn't work. I assumed it was for an older Windows version. Google got its hit from a comment saying it didn't work on Windows 7...
I have an SSD as my OS drive and HDD as a storage drive. If I setup any program to save downloaded files to my storage HDD (specifically the program Newsleecher for Usenet downloading) and allowing it to extract the downloaded rar files into the same storage HDD, would the files still "go through" the SSD before finally saving/extracting to the HDD?
Can I format a Hard Drive with Windows 7 using a 2000 format disk. If so, what are the prompts i see and action on boot-up before I use the format C. Done it before but just forgot
My system disk is about 80% filled up and I am looking to move the system files to a new disk for increased efficiency. I believe the way to go is diskcopy, creating a clone of current system disk to a new disk.smI am looking at EaseUS Disk Copy Home Edition 2.3.1 and MiniTool Drive Copy both freeware.
Awhile ago I got myself two SSD drives and installed Windows 7 on one of them. I didn't move over my OS from my old 1TB drive or anything I just did a clean install. Today I finally finished making sure I'd transfered over all my files from the disk and I was about to format it when I got the message that can be seen in the above picture. It seems the old Windows (D: drive) is still set as the System drive and my new Windows OS (SSD C: drive) is just set as Boot but not System.
This makes me unable to format it and I have no clue on how to fix this. Does anyone know how I can give my new SSD drive the System status so I can format the old drive?
Today my Windows 7 laptop wouldn't boot, returning a persistent Windows Boot Manager error 0xC00000e9. It recommended allowing Windows to start in a diagnostic state, which didn't work. I pulled the hard drive and put it in a USB adapter which I plugged into another Windows 7 system. I was glad to see all the normal directories off the root. When I tried to change directories to UsersFrank to copy off some critical files, it said I didn't have sufficient permission. What I need to do to accomplish this? I thought I was logged in as Administrator on the second system while examining the drive. Later I may try putting the drive back into my laptop and booting off a CD to try to repair the disk, but my highest priority is to get some critical files off the drive as soon as possible.
OS: Windows 7 Home Premium 32 bit The windows system image backed up on my external hard drive (2TB WD USB3) is not showing while restoring the PC from an image.
The only option available is my hard drive partition on which i also had saved a system image. Though windows recommends External hard drive for backing up image when backing up the system.
I want to make a recovery disc to reset my entire 4 partition dual boot hard drive back to its current state. the recovery would reset both xp and win 7 which i have dual booting. can i make one single image to do this without it screwing up my boot loaders etc? what should i use? 3rd party software?
I have been using build 7229, and it has been absolutly brilliant.
Now, apart from that, i have had general probs, one of which forced me to reinstall everything (Kaspersky 6.0 does not work properly with win 7, well i did'nt with me, had a BSOD when i rebooted, one of which explained a process that had been terminated, process that the CPU runs, anyway the HDD is formatted and i restarted again), this has now forced me to make a disk image incase something happens.
No what i wanna know is, can i use that disk image or a back-up and flash that onto an RTM version (when there released), so's i don't have to reinstall everything. i.e. the back-up or disk image does it all for me. Or is this not possible.
