i have laptop reinstalled with windows 7, it doesnt work properly, cos ram is 1GB only, i want to reinstall windows xp now, but it does not allow me to do that.
message comes that newer version is installed on this machine and it is not letting me to install windows xp.
It's time to format my hard drive. It hasn't been formatted since 2008 when it was bought and it's having some major issues.I made a system image. when i was installing it, I couldn't check the option to "get rid of the partitions and format the hd". It requested the drivers, asked me to insert the disc, but I don't have any disc with the drivers
View 12 Replies View RelatedSo I bought a used 2 TB Hard drive and it supposedly was only used a couple of times and I got a good deal.I plugged it in and the software was installed successfully but it doesn't show up in the explorer with a drive letter. Now when I go to the device manager it does show up but I am not able to format it or give it a letter etc. Also like I said in the title it doesn't have a fat32 or NTFS File System.The hard drive I right clicked is the one I am talking about.
View 4 Replies View RelatedCan I format a Hard Drive with Windows 7 using a 2000 format disk. If so, what are the prompts i see and action on boot-up before I use the format C. Done it before but just forgot
View 4 Replies View RelatedI have a 750Gb drive that I would like to reformat so I can use it for backups. When I try to format the drive I am told windows can't format it.
The drive was previously used as a C drive and held an intstalation of Vista. On the drives and Proram and Windows folders. When I tried to delete them I was told I needed permission from trusted installer. I found a "solution" to this on a microsoft site which effectively said to set the owner to the administrator group. I have done this. Now when I try and delete them I am told I need permission from the administrator. I have logged on as the administrator.
Formatting is also still forbidden. The files I want rid of take up 50Gb of space.
I have a LaCie 150 GB hard drive that I backed up all the files onto from my previous computer, a Mac. I now have a Lenovo laptop with Windows 7, and want to transfer some files to it. The hard drive can be seen in Devices, but not in "My Computer." I played around, not really knowing what I was doing, but I added a volume to the device in Computer Management. Now Windows says I need to format this volume before using it, which, obviously, I'm unwilling to do.
View 7 Replies View RelatedI can't recover or install a fresh copy, error !disk is write protected or not enabled in bios ! i have checked and double checked , i can not find no password or any thing in the properties
View 6 Replies View RelatedI have 2 hard drives, an SSD for my OS, and a 2nd drive that I store all my files on. I had to do a reinstall this morning, and since I understand Windows 7 has issues installing sometimes when there's 2 discs connected, I disconnected the power and sata cable from my 2nd drive. So I install Windows 7, and it goes fine. I turn off the computer, plug the 2nd drive back in, turn the computer on and see the drive letter, but when I click on it, I get a message "You need to format the disc before you use it". I go into disc management and it's listed there as well, but the File System is listed as Raw.
Since Windows 7 only takes 15 minutes to install on the SSD I use, I decided to install it once again but leaving the 2nd drive connected this time. My BIOS recognizes that the disc is there, as does windows. It's just telling me it's in RAW right now, and I have no clue how that happened. Oddly enough I even made an UBUNTU disc and booted to that...but from UBUNTU that 2nd drive doesn't even show up, it only recognizes the existence of my primary hard drive.
750 Samsung portable device. Problems seems to sort itself out eventually but it keeps firing up prompts to format the drive before I can use it. First time it happened I had to unplug it, restarted and then it was OK. It just did it again and then again when I restarted, took a minute or two but eventually it read the drive and it was ok. Why is this happening and what can I do to stop it? Might it be a power issue? I have the device connected via a USB 2.0 port, through an extension lead and then through a 4 way splitter. I have had problems with this splitter before I think, but not with the small connector. Maybe I can try connecting it through one of the other ports and see if it still has the same problem.
View 8 Replies View RelatedSo I've assembled a new desktop pc with a brand new Western Digital Green 1TB SATA hard drive. BIOS detects the hard drive and I pop in the Windows 7 DVD and go through the installation process until the screen that asks where I want to install Win 7 on the hard drive.
I try to format the drive but it gives me an error saying that the drive has to be in "read-only" mode and that I need to do so. That prevents me from progressing through the installation process.
I got no idea what that means and there is no extra pc around to format the new HDD on. Obviously there is no OS installed on the drive so I can format it inside Windows. That HDD is the only hard drive connected to the pc.
Specs: AMD Phenom II 1055T, 6 GB RAM, GTX460 HAWK
if i format my hard drive is there any way to keep windows 7
View 5 Replies View RelatedCan I format the hard drive on my pre bought windows 7 and put windows xp on it instead because my processor cant handle windows 7, i think it would just be faster, what do you think?
View 21 Replies View RelatedI have to format hard drive, after format an I get back my window 7 operating files by a recover software
View 2 Replies View RelatedI got a new SSD and I wanted to run my OS off of there, so I installed Win 7 on the new SSD and everything was fine. I still had my old hard drive installed for storage, but once I finished with it I went ahead and formatted that drive.
Now I'm getting a "this copy of Windows is not genuine" spam and not sure what to do about it.
I'm building my first pc and I'm getting blocked right at the gate. I have a 64bit Windows 7 installation disk (home version, "for system builders" ). This is a fresh installation, I don't have any other OSs for this build so my options are limited.
It starts out fine, but when I get to the point where I am to pick a hard drive to install to, it won't accept anything. It will allow me to delete partitions but clicking on "New" or "Format" (under the advanced options) makes it think for a few seconds, then just stop like nothing happened.
I have tried formatting it through gparted, but no matter what I do it complains that the drive has been formatted with in GPT, even when the drive is completely clean and unformatted.
I'm using a Samsung Spinpoint F3 HD103SJ 1tb hard drive
on the MSI P67A-GD65 mobo
with intel i7 2600k.
I am trying to format my hard drive and reinstall windows 7 as my hard drive is running out of memory tried removing some programs but is not doing much my hard drive is 232GB I only have 28GB left, how to format my hard drive.
View 9 Replies View RelatedI need to know how to wipe/format the hard drive to be able to re-install Windows 7 as 32bit.
View 3 Replies View Relatedhow to wipe/format the hard drive to be able to re-install Windows 7 as 32bit.
View 1 Replies View RelatedHow to full format my laptop hard drive. I have already Re install windows 7 in E: drive. Previously I have win-7 in C: drive after encounter some problems, Re-install new Windows 7 but that time I didn't format the hard disk that's why its install in drive E. Now when start the up of the lap top both selection are coming will start with old win or new win-7...and having some trouble with my windows 7 that's why I want to full format the hard dive without bootable disk and install new win-7.
View 2 Replies View Relatedi am using windows 7 os. Actulay i format the system. after formating system whn i login , i am getting msg "windows detected hard disk problem and you may loss datas from ur drive c,d & e" bt my system condition is good.wt should i do for this?hw can i clear this error? pls help me
View 1 Replies View RelatedI have 2 format programs recommended by GEEK, easus and mini tool partition...they will not allow me to do partition...The disk layout is C: system and files D: hp recovery data E:hp files...When I start I can do resize and get an allocated file, then on the allocated file I click create and then I get message this is not a primary, and I cannot find a way to change it....and if I use the other program(mini) it says there is no boot files.
View 9 Replies View Relatedinstalling build 7264.
mounted the ISO in magic disk and did custom installation.
the only options is load driver and i see the partition but i can't format it.
what to do?
I am doing a fresh install of Windows. I have done this before with XP, but the options are a little different on the Windows 7 DVD. What I am concerned about is the ability to format C Drive with a "Full Format" rather than a "Quick Format". The XP disk would give the user an option, but the Windows 7 dvd does not - it just has "Format" and appears to only do a quick format. How can I do a "Full Format" of C then install the Windows 7 on it?
View 2 Replies View Relatedwould like to know the easiest way to format my old hard drive using windows 7 64bit. so that im able to install windows7?
View 3 Replies View RelatedSo, I have a i7 2600K system with a solid state disk as the boot drive, and an older (c2008) Samsung Spinpoint F3 500GB drive as the data drive for programs (that I deem as not worthy of the quick load times). The hard drive has given me some errors over time, and I bought a hard disk to replace it (a Hitachi 1TB). The issue I'm having is that the fact that Windows 7 puts a small (100MB) partition on the F3, and for some reason, even though I'm running Acronis 2012, it doesn't seem to be able to clone the F3 over to the Hitachi. I've also tried Drive XML, and for my 2 hour wait, I only managed to acquire a boot error. Thankfully, I've not done anything rash to destroy the data on the F3, but given the fact that I've seen corrupted files in Steam from that drive, I'm not will to trust it long term with my data. I really need to get the data onto that Hitachi, though... Anyone have any advice for upgrading the HDD in a SSD/HDD system? I don't really feel like it should be so hard, especially if I've bought Acronis True Image, but maybe they haven't designed their product to handle this scenario quite yet?
View 9 Replies View RelatedI got a Western Digital 2TB Green Hard Drive and for some reason I can't seem to format it properly. I used Windows Disk Management and Partition Wizard and on one it takes a long time to format and on Partition Wizard, it stops at 90% complete and then just hangs there. Is this a bad drive or what should I do to format it?
View 3 Replies View RelatedI'm currently trying to format a hard drive to exFAT. It's not my main one it will be used for sharing files on my home network. Apparently you can do it just by right clicking the drive and choosing format however I just have the NTFS option, I don't have exFAT. Is there something else I need to do or get so I can format it?
View 1 Replies View Relatedi have a retail upgrade version of windows 7 professional x86 am i able to format the hard drive using the disk...i dont want to use it to install windows 7
View 4 Replies View RelatedSo I cannot format my secondary hard drive where Windows 7 RC was installed. Did I install Windows 7 incorrectly onto my system? I've posted a screenshot from my Computer Management window.
View 4 Replies View Relatedmy external hard drive (WD elements 1TB) has recently shrewd up after i formatted it. it has nothing on it not even a partition or format i added a partition using disk manger but i wont format it says format was unable to complete or something like that and it removes the partition that i just put on it i then partitioned it again but chose not to format and it had a drive letter and showed up as local drive in my computer when i looked at the format it just said RAW that is as far as i can get to getting it working?
View 1 Replies View Relatedmy external hard drive will only do a quick format not a full?
View 2 Replies View Related
