I have got a laptop with win 7 on it. There is only one drive in laptop which is C: , I want to wipe the hard disk and install win xp professional on it.1- How can i format the hard disk which has win 7 on it?2- After formating the hard disk, would i able to install the window 7 through recovery disk which i have already made incase anything goes wrong?
Can I format a Hard Drive with Windows 7 using a 2000 format disk. If so, what are the prompts i see and action on boot-up before I use the format C. Done it before but just forgot
I'm building my first pc and I'm getting blocked right at the gate. I have a 64bit Windows 7 installation disk (home version, "for system builders" ). This is a fresh installation, I don't have any other OSs for this build so my options are limited.
It starts out fine, but when I get to the point where I am to pick a hard drive to install to, it won't accept anything. It will allow me to delete partitions but clicking on "New" or "Format" (under the advanced options) makes it think for a few seconds, then just stop like nothing happened.
I have tried formatting it through gparted, but no matter what I do it complains that the drive has been formatted with in GPT, even when the drive is completely clean and unformatted.
I'm using a Samsung Spinpoint F3 HD103SJ 1tb hard drive on the MSI P67A-GD65 mobo with intel i7 2600k.
How to full format my laptop hard drive. I have already Re install windows 7 in E: drive. Previously I have win-7 in C: drive after encounter some problems, Re-install new Windows 7 but that time I didn't format the hard disk that's why its install in drive E. Now when start the up of the lap top both selection are coming will start with old win or new win-7...and having some trouble with my windows 7 that's why I want to full format the hard dive without bootable disk and install new win-7.
I have bought a new laptop (DOS installed) and trying to install windows7 After i installed windows 7, i can see only 30 gb drive in "My computer" (500 gb hard disk) When iam trying to create new volume in disk management on unallocated space iam getting a prompt that "this action will convert the disk to dynamic disk" when i proceeded with clicking ok i get an error message saying "Not enough space on the disk to perform the operation" Even in the windows installation screen iam unable to select the unallocated space and format. I can see the options "format", "delete" disabled for the partitions I can see the options enabled for only few partitions. This is a brand new laptop with DOS installed and iam installing the windows for first time.how can i partition the hard disk and format?
I am trying to format a 320 GB disk drive as single storage that was once used on a motherboard as a Raid 0 array. I can format the disk drive as NTFS via a USB cable, but when I try and connect the drive internally on the motherboard, the computer does not see it. When I go to disk managment to try and initialize hhe drive, it list the drive as a array and gives me an error. I have tried this a couple times and am at a loss as to hoe to get rid of the "Array" name disk managment says it is.
I have bought a new laptop (DOS installed) and trying to install windows7After i installed windows 7, i can see only 30 gb drive in "My computer" (500 gb hard disk)When iam trying to create new volume in disk management on unallocated spaceiam getting a prompt that "this action will convert the disk to dynamic disk"when i proceeded with clicking ok i get an error message saying "Not enough space on the disk to perform the operation"Even in the windows installation screen iam unable to select the unallocated space and format.I can see the options "format", "delete" disabled for the partitionsI can see the options enabled for only few partitions.This is a brand new laptop with DOS installed and iam installing the windows for first time.
Recently, I'm unaware of what happened to my Hard disc, If I connect it to my laptop or any other PC, it is asking me to format. I cant even open it, cant ready any data from it....If initiated for error check, to start an error check also, it is asking me to format.
Am unable to read or write in my hard disk.. every time it shows msg saying not accessible. i tried to format but even that is not happening. i tried using cmd prompt. but no use.
I have a Fantom portable Hard Disk 1 TB.....and I've been using it since 1 Year. Recently, I'm unaware of what happened to it, If I connect it to my laptop or any other PC, it is asking me to format. I cant even open it, cant ready any data from it....If initiated for error check, to start an error check also, it is asking me to format.
I'm here with 8 hd's all blocked, formats need them but I'm not getting or creating a partition because they are blocked, HDD Unlock saw the program but is expensive and is paid
i am using windows 7 os. Actulay i format the system. after formating system whn i login , i am getting msg "windows detected hard disk problem and you may loss datas from ur drive c,d & e" bt my system condition is good.wt should i do for this?hw can i clear this error? pls help me
I have an external harddisk that is encrypted using TrueCrypt. Each time I plug it in Windows prompts me to format the disk because it doesn't have any recognizable file system. Vista didn't use to do this. I suppose it's because of the UAC changes and a user couldn't normally do this in Vista. How to disable this prompt in Windows 7?
I purchased a new PC with Windows 7 in June 2012. It came with a Samsung optical disk containing Windows 7. I am eligible for the $14.99 USD upgrade to Windows 8.Will there be an installation disk for Windows 8 available at this price and if not, then how much more will it cost?If not, then how should I ensure that I can easily install Windows 8 after a hard disk crash? Do I have to keep my Samsung optical disk of Windows 7?
in my hardisk with G: size 465gb xp shows that 74.86 gb is remaining space......while space used is 0 , there are no hidden files, nothing in the disk K: size 186gb same as above and remaining is 35 gb according to windows xp i: size 196gb .in this only 9 gb is used and xp shows that 10gb is remaining//
i remember, last week everything was ok and all of sudden this problem has occurred. all other drives are ok only these three are way over their own heads.
my system is
Intel Core i5-2300 cpu@2.8ghz 2.79ghz,3.48 GB of RAM and windows is 32 bit/
SO, problem is: I got this USB, it worked very well 'til some days ago. I can't format it, no matter what I try, e.g. formatting it using different formats, formatting it using Computer Management, formatting it in safe mode. None of these things seem to work for me, and I have no idea why. There's also something else to it: before it became unusable and not format-able, it was somewhere around 4GB, and now, when I want to format it, it gives only the option to format it using the capacity of 12.5MB, which doesn't work anyway. I've tried looking at unpartioned spaces in it, but there aren't any, so I completely have no idea how to go through this problem.
i recently bought a new hard drive to put my os on, and i stupidly changed my old hard drive type from basic to dymainic, and its not letting me reformat it or convert it back to basic. When i try it says "Windows cannot format the system volume on this disk."
I recently backed up about 500gb of recent work onto an external drive so I could clean my PC inside and out. I gave it a clean install of windows 7 and when it comes time to get my work of my external, the drive cannot be recognized and requires a reformat.It was working perfectly fine and I surely did not format the drive into a RAW file system. I tried plugging into my laptop running win8 and still the very same issue. I plugged it into a mac running the lastest mac os 10 and I can browse all my folders and see the files but I can't move/copy or open them. But at least I know all is not lost.
who are skilled in Installing and Formatting Windows 7 Pro,My Computer is running in Windows 7 Professional 32BIT,after many months that I used my computer, I feel that my computer is in risk because some error/appcrash etc appear.Some .dll files can't be found when i open my PC.Even the antivirus is affected,my antivirus wont start in the startup when i open my PC,even if I try to scan my Hard Disc ,the antivirus wont run and it is not responding,even if I reinstall my antivirus or install new antivirus same problems are occuring. Because of this I decide to Format my PC and reinstall it again,My Hard Disk is a 500GB and it separated in two(Partition) The Local Disk C:and the Local Disk D:, The Windows 7 Pro installed in Local Disk C:,I decided just to format the Local Disc C: where the Windows 7 installed,I choose not to format Local Disk D:because my Important files are there. how to format the local disk C:and reinstall Windows 7 Again..
I have a 750Gb drive that I would like to reformat so I can use it for backups. When I try to format the drive I am told windows can't format it.
The drive was previously used as a C drive and held an intstalation of Vista. On the drives and Proram and Windows folders. When I tried to delete them I was told I needed permission from trusted installer. I found a "solution" to this on a microsoft site which effectively said to set the owner to the administrator group. I have done this. Now when I try and delete them I am told I need permission from the administrator. I have logged on as the administrator.
Formatting is also still forbidden. The files I want rid of take up 50Gb of space.
I have a LaCie 150 GB hard drive that I backed up all the files onto from my previous computer, a Mac. I now have a Lenovo laptop with Windows 7, and want to transfer some files to it. The hard drive can be seen in Devices, but not in "My Computer." I played around, not really knowing what I was doing, but I added a volume to the device in Computer Management. Now Windows says I need to format this volume before using it, which, obviously, I'm unwilling to do.
I was running Windows 7 and I decided to test out Linux Ubuntu so that I would know what I was talking about with the OS. The disc run was pretty bare bones so I decided to install it onto my system. Bad news is that it completely messed up Win7 somehow and I was pretty much forced to do a re-install of my Win7 installation. When I went to re-install to fix the lag errors, it says I can't install on any of my hard drives because they have been all changed to ext3 format by Linux. I have no idea how to change them back to NTFS format for Windows. is it possible to format my hard drives back to NTFS using the command prompt that is in the Win7 install disc?
I can't recover or install a fresh copy, error !disk is write protected or not enabled in bios ! i have checked and double checked , i can not find no password or any thing in the properties
I have 2 hard drives, an SSD for my OS, and a 2nd drive that I store all my files on. I had to do a reinstall this morning, and since I understand Windows 7 has issues installing sometimes when there's 2 discs connected, I disconnected the power and sata cable from my 2nd drive. So I install Windows 7, and it goes fine. I turn off the computer, plug the 2nd drive back in, turn the computer on and see the drive letter, but when I click on it, I get a message "You need to format the disc before you use it". I go into disc management and it's listed there as well, but the File System is listed as Raw.
Since Windows 7 only takes 15 minutes to install on the SSD I use, I decided to install it once again but leaving the 2nd drive connected this time. My BIOS recognizes that the disc is there, as does windows. It's just telling me it's in RAW right now, and I have no clue how that happened. Oddly enough I even made an UBUNTU disc and booted to that...but from UBUNTU that 2nd drive doesn't even show up, it only recognizes the existence of my primary hard drive.
750 Samsung portable device. Problems seems to sort itself out eventually but it keeps firing up prompts to format the drive before I can use it. First time it happened I had to unplug it, restarted and then it was OK. It just did it again and then again when I restarted, took a minute or two but eventually it read the drive and it was ok. Why is this happening and what can I do to stop it? Might it be a power issue? I have the device connected via a USB 2.0 port, through an extension lead and then through a 4 way splitter. I have had problems with this splitter before I think, but not with the small connector. Maybe I can try connecting it through one of the other ports and see if it still has the same problem.
So I've assembled a new desktop pc with a brand new Western Digital Green 1TB SATA hard drive. BIOS detects the hard drive and I pop in the Windows 7 DVD and go through the installation process until the screen that asks where I want to install Win 7 on the hard drive.
I try to format the drive but it gives me an error saying that the drive has to be in "read-only" mode and that I need to do so. That prevents me from progressing through the installation process.
I got no idea what that means and there is no extra pc around to format the new HDD on. Obviously there is no OS installed on the drive so I can format it inside Windows. That HDD is the only hard drive connected to the pc.