I now have a problem with Win 7 (RTM edition) as follows:
I have SATA1 drive 500gb: 1 Primary, and 5 logical or whatever you call that. Of these, I only see 3 (2 are unassigned letters, and when I try to get there, I get the error "The operation failed to complete because the disk managment console view is not up-to-date. Refresh view by................" (obviously this doesnt work).
I also have the new SATA2 1TB hdd split into 4 partitions (one of them is the OS ones) as well as Disk0 which is older 120gb U-ATA hdd.
Obviously I mean the two rightmost partitions from Disk1.
Also, I copied everything from that partition to another new one using XP, then tried to format it - which failed with some error... anyway tried to format it from this screen as well in 7, but it gave another error: "An unexpected error has occured. Check the system event log blabla.
I am running Win XP SP3 and I plan to upgrade to Windows 7. I currently have two hard disks as one is the system hard disk and the second drive is my data disk (E: Drive).If I upgrade to Windows 7, will I still be able to read the data on the E: drive? If Windows 7 can read the data, would it make sense to back up any files on the system hard disk to the E: drive so I could copy the files back to C: drive after Windows 7 install? All drives are currently NTFS.
I have a triple boot system: XP 32 bit, XP 64 bit, Win7 Pro 64 bit, each on a separate partition on separate hard drives. I can backup each of the XP OS partitions with a program I wrote that basically does a file and folder copy to a folder in a spare partition on one of the hard drives. The copy program I wrote tries to preserve time stamp and short file name info, otherwise, it's just a file and folder copy program. I use windiff to verify after a backup (or restore). For a restore, I can quick format a partition and copy the files back (using the program I wrote).
I tried doing the same with the Win 7 OS partition, backup, quick format, restore, but some of the information (metadata?) is lost. All of the actual data is there, and windiff doesn't show any differences, and Win 7 boots up, but then there are issues. ATI video driver catalyst control center fails to run (don't recall error message). The publisher information for many (or most or all) of the programs is lost, causing User Acess Control dialog box to appear anytime I tried to run a program,which should be Microsoft, but shows up as unknown. Internet Explorer 8 will state that a program has corrupted the default search provider repeatedly (even after selecting one).
So something is different between Win 7 NTFS and Win XP NTFS, or I need to enhance my copy program to copy addtional file information when doing the copies. If I get the time, I'll try a drag and drop from windows explorer in XP to see if that makes any difference.So currently I'm stuck using Win 7 system image backup for the Win 7 OS partition (it also images the C partition which contains the boot files like bootmgr).
I'm running on a relatively new install of Windows 7 64bit Ultimate. I recently (about 2-3 weeks ago) installed a new HD and decided to have a fresh start so everything was formatted followed by win 7 install. Everything has been running great up until mid day yesterday. Out of what seems like nowhere I experienced 6 or 7 BSOD's yesterday and from what I could tell they occurred when I tried to do any of the following: 1. Access drive D and play a video file (This is the new HD, it would instantly BSOD). 2. Access internet within 1 minute of startup.
Since yesterday I haven't had any BSOD's and have had the computer running, I haven't tried to play any videos off of HD and haven't reset my computer since (hoping that whatever it was has gone away, although I'm sure it hasn't). For the record I have accessed some music files on drive D without any issue, as well as several word and excel documents (not sure if that makes any difference?)I have a feeling it may have something to do with my new HD that I installed, but have no idea what it could be as it was running without issue up until yesterday (for at least 2 if not 3 weeks).
My system specs are as follows:S: Windows 7 64bit UltimateManufacturer BIOSTAR Group Model A740G M2+ Total amount of system memory 6.00 GB RAMSystem type 64-bit operating system umber of processor cores 2 isk partition (C) 272 GB Free (298 GB Total) isk partition (D) 1630 GB Free (1863 GB Total) isplay adapter type NVIDIA GeForce GTX 460 other info:-all drivers should be up to date to the best of my knowledge- i've looked around and have seen a lot of recommendations to run memtest? I have yet to do soI've enclosed a system health report and minidump file as outlined on forum requirements.
One of my friends has a windows 7 computer with an account for himself, his mother and his 2 sisters. All the home directorys are stored in drive C. Partition D is shared. The question is, how to get a partition layout like this?
Partition 1: OS + programs Partition 2: home partition for himself Partition 3: home partition for his mother Partition 4: home partition for his sister Partition 5: home partition for his other sister Partition 6: shared partition for some photos.
I have a second hard drive that is formatted FAT32 and I need to reformat it to NTFS so I can install Windows XP as a dual boot option. It shows 146GB of 148GB free space; however, when I open the drive it says "This folder is empty". I once had Ubuntu installed and reformatted the drive, but it may be hidden somewhere on the drive. I have tried to reformat by right clicking the drive letter and using the format command, but I get an error message "Windows cannot format this drive. Quit any disk utilities or other programs that are using this drive, and make sure no window is displaying the contents of the drive. Then try formatting again.". When I check the drive for contents using CMD it says "Volume in drive is New Volume Directory of D: File Not Found". When I try to format D: from the C: prompt, it says "Access Denied as you do not have sufficient privileges. You have to invoke this utility running in elevated mode." I am logged on as Administrator
My computer crashed and then crashed again during the restart. Windows tried the start-up repair, did its self diagnosis and said I have a corrupt ntfs.sys file.How do I fix this? I have looked on the Win7 installation disk but did not find any drivers.
We have. Computer its 2.8ghz 2gb ram 1x2 dimmand 500gb hdd it has BSOD and hasnt worked for a month. NOTHING at all works tried every single way to get in it just says ntfs.sys page fault in nonpaged area i cand download amything do anything it loads to a bsod
i get random BSOD while playing my laptop. after doing some research and updated all my driver. this two causes of BSOD always pop out. my laptop model asus K42Jv, i5,4gb ram,and 64bit OS.
on my netbook there is C drive which is FAT 32 and D drive which is NTFS. the thing is i have windows xp dualbooting windows xp (i know its weird). i am only using C drive so i want to format the D drive and merge it with C drive so i can have more space. the thing is it doesnt let me delete it. i tried using Easus Partition manager, but there was no delete option or anything like that. i cant use the CD because mine is a netbook. also booting from USB does not work because my computer is old and it doesnt support booting from usb in BIOS.
I have Windows 7 on my main machine and am using a spare drive right now. Power went out and when I turned my computer back on, it wouldn't start so I removed the HDD and plugged it into test computer which was when I found it had become a RAW file system.Alright, so basically I'm wondering how I should convert my RAW drive back into NTFS so I can use it again and I'm not interested in retrieving information as I had nothing of value on that drive, because all important stuff is on my storage drive - which is 1TB in size. I have tried a variety of methods including.
1. Using Disk Management, even though it recognizes it and shows it as a RAW format - I am unable to format it as it gives me a "Format could not be succesfully completed" error message, also deleting and making new partitions has no effect.
2. Tried using DOS to convert it from RAW to NTFS
3. Tried using programs like PTDD Partition Table Doctor and EASUES Partition Master to rebuild the partitions, fix the Master Boot Record and then convert to either FAT32 or NTFS (if it's FAT32 I'll convert it to NTFS afterwards)
4. Tried to format from the "My Computer" window via right-clicking and selecting "Format"
5. According to TestDisk I have 0 partitions and when I do a deep search it forks of a load of read errors. :
As far as I know, PPTD Partition Table Doctor tells me that there sector count is incorrect and that the MBR is in the the wrong section.If you want my system specifications, Here:
Windows 7 64-bit AMD Athlon X2 6400+ 3.2GH 6GB DDR2 RAM 667 BFG GTX 260 (216) OCX 1TB Green Cavier Western Digital 80GB Seagate Barracuda (Now in RAW format)
used gparted to copy partition from windows7 laptop to usb ext HD as ntfs partition. iam am able to view files and evrything ok. when i reboot into win7 it sees partition as RAW. its says i need to format it.
Just decided to upgrade from SP3 to 7 today, downloaded, burned and now when i boot from disk. windows loads then an error pops up saying"Windows failed to load because a critical , missing, or corrupt""windowssystem32driverstfs.sys"
I put a new hard drive in my ThinkPad T500 and installed Windows 7. I put the old hard drive, which has Vista installed into an external USB box. I can mount the drive, but there are some folders that I can't access. I also cannot seem to give "Everyone" access, or to take ownership. Is there some simple way to override the NTFS security settings?
I have a new windows 7 64-bit computer and two 4-year old external Western Digital HDDs. They connect fine and transfer data okay except when i try to do a Windows system mirror.All was well with XP Pro and the same HDDs but Windows 7 tells me the HDDs are not formatted to NTFS.Firstly, what does this mean as i would really like a system mirror and secondly, is there a way round it withpout formatting the HDDs and losing all the data?
Im trying to convert a drive on my laptop from FAT32 to NTFS as recommended by Microsoft baseline security analyzer. When I type in convert E: /fs:ntfs command in the cmd prompt I get a message that I dont have permissions to do so. How, on my own machine do I get permissions or what do I type in to get to root? I know that on Linux machines you type in su to enter password to get to root user but Im not sure how on my own windows machine. I am a 1st year IT student and am learning. I thought I had all the permissions since I am logged into my machine as administrator.
Setup mb asus p6t6 ich10r (raid controller) 2 x vertex 30GB 2 x seagate 1.5TB in ( motherboards controller fakeraid ) raid 0 array Volume1 = 1 GPT partition with 1 windows dynamic simple volume ntfs formated (just 1 big ~3TB partition for storage created on a previous install of Windows 7)
Reinstall Window 7 on a vertex
Problem: After reinstall the raid array is not recognized by Windows 7 it asks me to initialize the disk (which is a raid volume). I say yes, then asks to create MBR or GPT i say GPT. But then it says the disk is unallocated and wants me to create a new dynamic volume, i say simple volume. But now is asking to format... and here i stopped, with out formating to new ntfs.
Questions: Is there a way to recuperate / restore / reinstate / recover / rescue / rebuild .... the old dynamic ntfs simple volume ? So that i could access the data without having to use a data recuperation program for 3TB of data.
Will a quick ntfs format and a scan-disk make that possible?
New PC built from a bare bones machine url...Turned off the computer safely with 4 partitions In the morning will not boot.Tried to reinstall Windows 7, but I there is no drive available to select. Minixp lists the 4 drives just none accessable The drive shows up on POST and in the BIOS. ubuntu live finds the os partition and one other partition (able to extract those files. HDat2 says no errors Ihave confused the tech support people as the drive is clearly not dead. Since that Iran diskgenius via minixp
0 = RAID 992.5kb 1 = RAID 100mb 2 = RAID 48.7gb 3 = RAID 1.8tb Has it really turned RAID (WHY?) and how do I fix it?
I have an external drive that does backups of files for me on a weekly basis through windows, needless to say the backup was getting bigger so I decided to go for a better data storage solution and formatted the external into NTFS. While doing this I also decided to format a USB key into NTFS.THE external drive format took hours, four or so hooked up via firewire. I blamed the issue on the drive and ignored it for the next couple of weeks. The backups didn't work properly they stopped halfway according to Windows even if I let them run 12+ HOURS. Before I formatted it took only 2-3 hours for the backup. I blamed the entire issue on the drive, maybe time to replace it, but I didn't have time to mess with it cause it was simply annoying me.Didn't use the key until tonight. Remember it is formatted as NTFS also. I started to copy a movie file to it, 700mb, it stopped at nearly 89% with 5 seconds left and did not move one bit. I hit cancel and it stayed on the cancel screen for 10 minutes with no resolve. At this point I tried to open a firefox window and it was not responding.......so what did I do I pulled the key and just like that Firefox window popped up and all was well. At that point it hit me, but the external storage solutions are NTFS, could it be my Mobo? Surely not!, Oh Microsoft you make me sad again....Just like with Vista. I reformatted the USB key back to FAT32, transferred a larger 1.4gig file in about 2-3 minutes and had no hangup issues. I can't blame the issue on the mobo especially since it relates to both USB 2.0 connection and the FireWire has the same issue. I guess windows 7 64bit doesn't like external NTFS connections. My windows appears up to date!
When I start my PC it shows a message that "your file named NTFS is corrupt". Then PC screen becomes Blue and shutdown my PC! Should I change my hard drive?
My hard drive has two partitions. The second partition - D - contains only data files (documents, pictures, etc.) My computer has 3 users - myself and two others. I am an Administrator and the other two are Standard Users.
The root of D has three folders:
D:user1 (that's me) D:user2 D:user3
The NTFS permissions on each user's folders are as follows:
Administrators - Full Control SYSTEM - Full Control user - Full Control
This prevents the Standard Users from accessing anyone else's data but their own, while maintaining the right of Administrators (like me) to access everybody's data.
The NTFS permissions on the root of D (only) are as follows: Administrators - Full Control SYSTEM - Full Control Authenticated Users - Read and Execute
If Authenticated Users does not have NTFS permissions on the root of D, I am denied access to D, even though I am an Administrator.If I double-click on the drive icon I get an 'Access Denied' message. However, if Authenticated Users is included in the NTFS permissions, I can open D by double-clicking on the drive icon.Why can't I access the root of D as an Administrator ... why does Authenticated Users need permissions?
I had to use my thumb drive to upload files to a Mac, so I reformatted the drive to FAT32. Now I'm trying to get it back to NTFS so I can use again on my Win 7 machine, but the drive is not even showing up in My Computer.
The Drive shows in Device Manager and in Disk Management, but offers me no option to format.