Raid 0 Windows Ntfs Gpt Volume?
Aug 3, 2011
Setup mb asus p6t6 ich10r (raid controller) 2 x vertex 30GB 2 x seagate 1.5TB in ( motherboards controller fakeraid ) raid 0 array Volume1 = 1 GPT partition with 1 windows dynamic simple volume ntfs formated (just 1 big ~3TB partition for storage created on a previous install of Windows 7)
Reinstall Window 7 on a vertex
Problem: After reinstall the raid array is not recognized by Windows 7 it asks me to initialize the disk (which is a raid volume). I say yes, then asks to create MBR or GPT i say GPT. But then it says the disk is unallocated and wants me to create a new dynamic volume, i say simple volume. But now is asking to format... and here i stopped, with out formating to new ntfs.
Questions: Is there a way to recuperate / restore / reinstate / recover / rescue / rebuild .... the old dynamic ntfs simple volume ? So that i could access the data without having to use a data recuperation program for 3TB of data.
Will a quick ntfs format and a scan-disk make that possible?
View 5 Replies
ADVERTISEMENT
Mar 8, 2012
New PC built from a bare bones machine url...Turned off the computer safely with 4 partitions In the morning will not boot.Tried to reinstall Windows 7, but I there is no drive available to select. Minixp lists the 4 drives just none accessable The drive shows up on POST and in the BIOS. ubuntu live finds the os partition and one other partition (able to extract those files. HDat2 says no errors Ihave confused the tech support people as the drive is clearly not dead. Since that Iran diskgenius via minixp
0 = RAID 992.5kb
1 = RAID 100mb
2 = RAID 48.7gb
3 = RAID 1.8tb Has it really turned RAID (WHY?) and how do I fix it?
View 9 Replies
View Related
Mar 23, 2011
I put a new hard drive in my ThinkPad T500 and installed Windows 7. I put the old hard drive, which has Vista installed into an external USB box. I can mount the drive, but there are some folders that I can't access. I also cannot seem to give "Everyone" access, or to take ownership. Is there some simple way to override the NTFS security settings?
View 4 Replies
View Related
Nov 20, 2009
How to Convert a FAT or FAT32 Volume to NTFS in Windows 7 ?
View 0 Replies
View Related
May 6, 2012
I am having trouble installing windows 7 (home premium) on my new raid array (2x intel 330 120GB SSD in RAID0). Basically, windows CAN see the raid volume. it recognies that there is a single 223 GB volume available. I select "Load Driver" for the volume, and plug in my trusty USB with the appropriate intel SATA RAID drivers. Win7 recognizes that there is a compatible driver on the USB, installs it, but still says: "Windows cannot be installed to this disk. This computers hardware may not support booting to this disk. Ensure that the disk's controller is enabled in the computer's BIOS menu". The format and create new partition options are grayed out for this volume.
Using the Intel Rapid Storage Technology tool, I combined the two drives into a raid0 volume. This is confirmed because when I restart, the raid volume shows up in the RST echo with the right size, and also indicates that the volume is bootable. It is also confirmed because the windows 7 setup only sees one 223GB disk. I have confirmed that in the BIOS, the SATA controller is set to RAID mode (not AHCI). I have confirmed that in the BIOS, the first boot option is "RAID intel SSD". I've tried the RAID drivers that came with the motherboard, Ive also tried the raid drivers available from intel and the latest raid drivers available from the motherboard MFR.
ASROCK extreme 6
Intel Core i7-3770k
16 GB RAM
2x intel 330 120GB SSD
NVIDIA GTX 680
View 1 Replies
View Related
May 25, 2012
So i have my computer running with a 120gb ssd as the boot drive and 2x 1tb hdds in raid 0 for the data. And today when i went to boot up my computer the raid 0 failed to start....both of the drives are detected but only one appears to be in the raid 0 volume. I know the disc physically still have all there data on them because i have not touched them. Is there any way that i can recover that raid 0 volume? i ask because i have data programs and complicated mk links setup to manage the files.....and yes i know i should have backups..i have a asus p8z68-v pro gen 3 board with 8gb ram and a i5-2500k
View 9 Replies
View Related
Dec 1, 2011
I have a triple boot system: XP 32 bit, XP 64 bit, Win7 Pro 64 bit, each on a separate partition on separate hard drives. I can backup each of the XP OS partitions with a program I wrote that basically does a file and folder copy to a folder in a spare partition on one of the hard drives. The copy program I wrote tries to preserve time stamp and short file name info, otherwise, it's just a file and folder copy program. I use windiff to verify after a backup (or restore). For a restore, I can quick format a partition and copy the files back (using the program I wrote).
I tried doing the same with the Win 7 OS partition, backup, quick format, restore, but some of the information (metadata?) is lost. All of the actual data is there, and windiff doesn't show any differences, and Win 7 boots up, but then there are issues. ATI video driver catalyst control center fails to run (don't recall error message). The publisher information for many (or most or all) of the programs is lost, causing User Acess Control dialog box to appear anytime I tried to run a program,which should be Microsoft, but shows up as unknown. Internet Explorer 8 will state that a program has corrupted the default search provider repeatedly (even after selecting one).
So something is different between Win 7 NTFS and Win XP NTFS, or I need to enhance my copy program to copy addtional file information when doing the copies. If I get the time, I'll try a drag and drop from windows explorer in XP to see if that makes any difference.So currently I'm stuck using Win 7 system image backup for the Win 7 OS partition (it also images the C partition which contains the boot files like bootmgr).
View 6 Replies
View Related
Nov 19, 2011
Installed a new M4 ssd today and loaded windows on it. Previously i was using 2 raptors in raid 0 for the os and programs. I re raided the 2 raptors and connected them to the jmicron ports and set them up for raid in bios, then created the raid 0 array no prob. Windows doesnt see the array when loaded up and i have the latest rst drivers installed..did this prior to the os install on the ssd. using the x58 e760a1 mobo. under device manager, the raid controller has an exclamation mark and no driver installed yet i have the latest rst 10.8.0.1003 installed..
View 1 Replies
View Related
Apr 25, 2012
I have tried to find the way to do this, but without success as I cannot see the wood for the trees.
I have a mature Windows 7 system, with so many applications loaded that rebuilding from scratch is just not an option. I have a 300MB Velociraptor wholly given over to the OS and another empty 300MB VR. I want to extend, that may not be the right word, my OS to use both disks in Raid 0.
View 2 Replies
View Related
Jan 26, 2012
I bought a USB A4 Tech HU-200 HeadPhone Its volume is quite high even when the windows volume is at 0, When its at max 100 it works like dedicated speakers Is there any way to reduce the volume beyond the lowest volume of windows 7?
Note: My Headphone does not have any soft of driver or software
View 3 Replies
View Related
Jul 10, 2012
I have Win 7 Pro 64 bit installed on an ASUS P7P55D LE motherboard which supports RAID 0,1,5 and 10 using Intel Matrix Storage Technology through an on board Intel P55 chip set. The system was assembled in Nov 2009 using two Western Digital Caviar Black 750Gb drives in RAID 1 as Drive C:. (I now know from Western Digital Customer Service that I shouldnt have done that, but lets move on from there). Last December, an error message informed me the RAID array was broken and identified one of the 750 Mb drives as needing replacement. I happened to have a spare 1.5Tb WD Caviar Black at the time, so I pulled the 750Mb drive and replaced it with the 1.5Tb drive. Life was once again good. Then on July 4th (wouldnt you know) there was a repeat of the December 2011 error message telling me to replace the other original 750Gb drive. Okay so I had another 1.5Tb WD Caviar Black laying around (dont ask) and did a similar swap out. Thats when I emailed WD Customer Support asking about the 750 since their diagnostic software said the drives were fine. Thats when I learned that I should be paying lots more for enterprise quality drives if I want/need RAID. Well thats not what ASUS says in their advertising, but live and learn. All thats prologue, because my real question is whether its possible to break the hardware-based RAID 1 array and set up a Windows 7-based RAID 1 with the two 1.5Tb WD Caviar Black drives without having to reinstall Windows 7.
View 1 Replies
View Related
Aug 24, 2012
I need a PCI SATA 6 RAID card that has at least 4 slots for 4 X 2TB Hard drives for a RAID 5
View 3 Replies
View Related
Apr 22, 2012
What is the optimal set-up?
High volume on speakers and low in windows, or low on speakers and highest in windows?
View 8 Replies
View Related
Jan 1, 2013
I had one hard drive failed(640gb). I bought replacement and tried to restore image but it failed. Then I wanted to convert to non raid system. I changed both drives(640gb) to non raid and bios change in advance setup. I am getting error when I try to reinstall win 7, "setup was unable to create a new system partition or locate an existing system partition. See the setup log files for more information". I have deleted old partition many times but win 7 setup on this dell xps435 desktop won't install windows.
View 4 Replies
View Related
Aug 12, 2012
Which configuration would be better using mobo sats 2 raid or using seperate rid controller via pcie card Rosewill Rc-211 wsis3132) or should I use mobo for raid and card for extra sata w/o raid I have more drives than sata slots. How do I transfer data videos/Tv shows from existing drive to raid?
View 1 Replies
View Related
Mar 28, 2012
so i have a blue yeti, and i'm an online animator/voice actor. whenever i record audio on my blue yeti (or any other mic) i record about 4-6 inches from the mic, and turn the gain down enough that the audio doesn't peak as i yell or whatever. this is what you're supposed to do if you don't want your audio levels peaking and making your recording sound horrible and corrupted. however, afterwards, it means i have really quite recordings. not a problem right? now that it's recorded right, i can boost the volume of the entire clip afterwards right? wrong. i'm not an audio expert so i must be missing something. but why in gods name would the audio distort and peak after it's recorded successfully? it's all there, it's all clean audio. if i turn the volume on my speakers all the way up it sounds crystal clear! all i want to do is do that inside the computer so that when i upload it to Internet people don't have to turn their speakers so far up. but if i increase the clips volume in the computer, it distorts! it sounds awful! why?! i tried in sony acid and audacity and they both do the same thing! i can take sound effects, and recordings made by other producers and crank them up nice and loud, but mine just fall apart!
View 2 Replies
View Related
Mar 1, 2012
I just received a new keyboard today: Thermaltake Challenger Ultimate. I went from a Logitech G15.
First thing I did was connect the keyboard and install the software that came along on the CD, it probably also installed the correct drivers. First after this did I uninstall the software and drivers from the old Logitech G15. But before that, and now after, the volume buttons on my new keyboard is still not adjusting the volume when I press them.
A speaker-icon like this shows up when I press the volume buttons, so its not that the keys are not working: (ignore the text behind it, its me writing an assignment)
View 5 Replies
View Related
Jan 1, 2013
I recently got this problem, that my volume hotkeys stopped working, (Acer Aspire 5560G) AMD High Definition Audio. I also tryed plug in other keyboard that have's volume hotkeys but still doesn't work.
View 2 Replies
View Related
Mar 17, 2009
I like to listen to music loudly sometimes. I have both the volume mixer and my application's volume set to maximum levels, but it's not loud enough for my liking. Is there any way to increase the maximum sound volume in Windows 7?
View 9 Replies
View Related
May 11, 2010
[email]amtemirak@hotmail.comSpoiler :[spoiler]
View 1 Replies
View Related
Jan 6, 2009
anyways, my main drive is a RAID 0 with Vista x64, but I have a second HD that is a SATA 250GB, which I installed Windows 7 on. The only way I could get install to work was to switch my BIOS to IDE mode rather than RAID. I would of course though, like to be able to access my Vista drive from Windows 7 (and more importantly, not have to switch between IDE/RAID mode at all in the BIOS, it's a pain).
Now, the one odd this about this all is that the drivers I have for Vista (x86/x64 drivers) for this mobo's RAID controller WORK when loaded on installation to identify and install to the drive, but seem to not load or not work in any way once the first reboot on install occurs. Maybe this is because I installed from within Vista x64, though.
(Incedentally, my motherboard is an M3A Asus, using ATI's SB600 for a RAID controller)
I've tried loading the drivers from within Windows 7 while in IDE mode, but the install program won't let me. At first it didn't allow because of version restrictions, but then I altered the ini file to get around that, but it encounters some sort of error when installing and quits.
Any help that can be offered, would be grateful. I realise it's a beta and not a real release, so I can get past the BSOD from my odd setup, and I really am enjoying playing around with it so far. Very very impressed.
Edit: Just in case anyone thinks of suggesting me to right-click the inf file and install that way, already tried, won't allow for it.
View 0 Replies
View Related
Jan 12, 2012
We have. Computer its 2.8ghz 2gb ram 1x2 dimmand 500gb hdd it has BSOD and hasnt worked for a month. NOTHING at all works tried every single way to get in it just says ntfs.sys page fault in nonpaged area i cand download amything do anything it loads to a bsod
View 9 Replies
View Related
Jan 7, 2013
how to delete NTFS files in my hard drive E
View 2 Replies
View Related
Aug 19, 2009
Just decided to upgrade from SP3 to 7 today, downloaded, burned and now when i boot from disk. windows loads then an error pops up saying"Windows failed to load because a critical , missing, or corrupt""windowssystem32driverstfs.sys"
View 1 Replies
View Related
Feb 21, 2011
How do I convert with command prompt comes up CDocumenand Settings/charlie> and not just C:?
View 5 Replies
View Related
Nov 25, 2009
I am running Win XP SP3 and I plan to upgrade to Windows 7. I currently have two hard disks as one is the system hard disk and the second drive is my data disk (E: Drive).If I upgrade to Windows 7, will I still be able to read the data on the E: drive? If Windows 7 can read the data, would it make sense to back up any files on the system hard disk to the E: drive so I could copy the files back to C: drive after Windows 7 install? All drives are currently NTFS.
View 18 Replies
View Related
Jan 25, 2011
I am using Win 7 Pro x32 and have partitioned my hard drive into two NTFS partitions. One is for my Windows other one is for my files and personal documents.I'd like to know how to format the partitions in terms of cluster size. I read a lot of articles which didn't actually answer my question - what are the differences between formatting with a big and small cluster size, and how does all that influence the overall performance. I should also mention that I am willing to sacrifice some bits and bytes from my partitions, if needed, as long as I could somehow increase performance. Also, I noticed that the standard Windows 7's formatting dialogue allows to format a partition only with a limited size of clusters compared to trying to format a partition using software such as Acronis Disk Director or Paragon Hard Disk Manager where I was able to format with a much greater cluster size. What to do, what to do...? You could save the small talk such as - 'small cluster size wastes less disk space but works slower, and vice versa, greater cluster size wastes more space but gives better performance'.
View 11 Replies
View Related
May 4, 2012
How to release a lock by ntfs in c drive in windows 7
View 1 Replies
View Related
Jan 17, 2012
I made a backup to external hard drive of my mother's computer, before a conversion to Windows 7.At home in Austin I have transferred the folders, files to my dual boot Vista/Windows 7. I notice that even after taking ownership of the backup, that looking over permissions I am the owner, also the Administrator of my computer, but I need to find a way to have the inherited from apply to my account, as it is clear that not all folders and files are visible.Does anyone know what I need to do so that the entire hard drive has permissions for me applied to all folders and files on that specific hard drive?It is not the boot or system hard drve. I want to make sure I am not just the owner, but any inherited permissions apply to all folders and fles with an NTFS file system.I used to have some script several years ago when I applied this to servers I was working with. I just need to do this with one hard drive and Windows 7.
View 1 Replies
View Related
Jan 26, 2012
a number of backup copies of large files on external USB-connected NTFS drives differed from the source versions still on my hard drive. I also discovered that I could reproduce the issue with newly-copied files.Here are the specifics of the issue, following a series of experiments:
- On my system, copies of large files, files typically larger than 500MB, are corrupted (altered) roughly 30% of the time when copying them under Windows 7 64-bit to USB-connected NTFS-formatted external drives.
- No error occurs / no error message appears during the copy
- The file size of copy is always identical, whether or not data was altered during the copy process.
- File differences are confirmed via either the command-line "FC" command or a utility such as WinDiff
- The issue impacts copies made via the Windows GUI -OR- via command-line copy or xcopy
- The issue occurs with multiple external USB NTFS-formatted drives, no matter what make or model.
- Subsequent attempts to copy an affected file will ultimately yield an identical copy. This would seem to rule out interference by an external program such as an anti-virus program (and the only AV I am running is Microsoft Security Essentials)
- The USB drives involved pass error checks, and copies made to these drives on other (non Windows 7) systems produce identical copies
- So far, the third party utility "TeraCopy" manages to consistently produce clean copies, and therefore is a temporary workaround. This utility apparently works because it, by default, bypasses the NTFS memory caching operation used by the Windows 7 OS...a caching system which I have so far found no way of disabling.
- The problem does not appear to impact relatively small files (1 to 100MB or so). I have not found any particular threshold, but I have seen the issue impact numerous files in the 500MB neighborhood.
- The problem seems to date at least to the version of Windows 7 that was in release as far back as the Fall of 2010, as I discovered corrupted backup copies of files dating back that far. Again, the files are corrupted with respect to the original copy...NOT with respect to file structure itself.
View 6 Replies
View Related
May 9, 2011
I have a second hard drive that is formatted FAT32 and I need to reformat it to NTFS so I can install Windows XP as a dual boot option. It shows 146GB of 148GB free space; however, when I open the drive it says "This folder is empty". I once had Ubuntu installed and reformatted the drive, but it may be hidden somewhere on the drive. I have tried to reformat by right clicking the drive letter and using the format command, but I get an error message "Windows cannot format this drive. Quit any disk utilities or other programs that are using this drive, and make sure no window is displaying the contents of the drive. Then try formatting again.". When I check the drive for contents using CMD it says "Volume in drive is New Volume Directory of D: File Not Found". When I try to format D: from the C: prompt, it says "Access Denied as you do not have sufficient privileges. You have to invoke this utility running in elevated mode." I am logged on as Administrator
View 6 Replies
View Related