NTFS Automatically Changed To RAID?

Mar 8, 2012

New PC built from a bare bones machine url...Turned off the computer safely with 4 partitions In the morning will not boot.Tried to reinstall Windows 7, but I there is no drive available to select. Minixp lists the 4 drives just none accessable The drive shows up on POST and in the BIOS. ubuntu live finds the os partition and one other partition (able to extract those files. HDat2 says no errors Ihave confused the tech support people as the drive is clearly not dead. Since that Iran diskgenius via minixp

0 = RAID 992.5kb
1 = RAID 100mb
2 = RAID 48.7gb
3 = RAID 1.8tb Has it really turned RAID (WHY?) and how do I fix it?

View 9 Replies


ADVERTISEMENT

Raid 0 Windows Ntfs Gpt Volume?

Aug 3, 2011

Setup mb asus p6t6 ich10r (raid controller) 2 x vertex 30GB 2 x seagate 1.5TB in ( motherboards controller fakeraid ) raid 0 array Volume1 = 1 GPT partition with 1 windows dynamic simple volume ntfs formated (just 1 big ~3TB partition for storage created on a previous install of Windows 7)

Reinstall Window 7 on a vertex

Problem: After reinstall the raid array is not recognized by Windows 7 it asks me to initialize the disk (which is a raid volume). I say yes, then asks to create MBR or GPT i say GPT. But then it says the disk is unallocated and wants me to create a new dynamic volume, i say simple volume. But now is asking to format... and here i stopped, with out formating to new ntfs.

Questions: Is there a way to recuperate / restore / reinstate / recover / rescue / rebuild .... the old dynamic ntfs simple volume ? So that i could access the data without having to use a data recuperation program for 3TB of data.

Will a quick ntfs format and a scan-disk make that possible?

View 5 Replies View Related

Local Hard Drive Changed To NTFS By Clicking On Permissions

Mar 26, 2011

did system restore no change to ntfs local disk.local disk changed to ntfs. cannot open local disk C:no windows action center, not working all including:Device Manager,Remote Settings,System protection not format.is there any other way except reinstallin OS again.My os is win 7 ultimate..

View 4 Replies View Related

Graphics Card Changed Automatically?

Nov 25, 2012

I had Intel HD 3000 graphics but when I reformatted my computer I now have, Intel Sandybridge Mobile Graphics Chip set and my adapter type is: Standard VGA Graphics Adapter also my resolution now is 1024x768. It used to be 1280x1024. What happened? When I try updating the driver it says its already up to date.

View 1 Replies View Related

Laptop Changed Theme Automatically?

Jul 28, 2011

my laptop changed theme automatically

View 1 Replies View Related

Desktop Display - Background Automatically Stretches When Changed

Jul 1, 2011

For some reason, whenever I go to change the background on my desktop it automatically stretches it and won't let me save any other option such as center, fix, or tile.

View 9 Replies View Related

Changed The SATA Controller From AHCI To Raid SATA Result = FAILED?

Aug 10, 2010

Very little, all the parts were shipped here about four days ago and I spent a couple of hours putting them together. I ran into a hiccup when Windows 7 Home Premium would not get past the extracting phase of the installation, kicking up the error in this thread. I began the first install on a 20GB partition, when that failed I tried just installing it on a single partition. When that failed I tried removing all the partitions and just installing on the unformatted drive, in it's entirety (seemed weird but others said they had luck with this).Testing Methodology:

At the end of each attempted solution I tried to install Windows again.My keyboard is a USB keyboard. All of my boot testing is done with a bootable USB that I have running MS-DOS 6.22. What I Have Tried:Solution 1: First I went into the bios and changed the SATA controller from AHCI to Raid SATA Result = FAILEDSolution 2: I tried burning OEM Windows disk from Microsoft to an iso at the lowest speed possible for my DVD burner (4x).Result = FAILEDSolution 3: At this point I had created and deleted so many partitions I was concerned it may be having an effect on the install. So I went to Samsung's website and grabbed their HDD utility tool. I figured let's kill two birds with one stone and test the drive while also restoring it to it's original state. So I did a low level format and then ran the HDD diagnostic. All came back with no errors. Result = FAILED

On to memory...Solution 4: I downloaded Microsoft's Memory Diagnostic Tool and let it run overnight. It returned no errors. So I decided to use MemTest86 4.1 and let it run for 10 passes, I did find errors then. As of now I am running each module of memory one by one to determine if it is a problem with them or the sockets on the motherboard. So far I have been unable to reproduce the errors I got when both modules were running together. As a precaution I double checked the motherboards specifications on the socket order for memory, all is to specs. Result = [PENDING]What's Next:After my current memory test ends, I plan on checking my BIOS to see if the correct memory speeds were detected in the auto detection. If at that point I'm still unable to reproduce the memory errors, I'll put both memory modules back into the system and run the testing again to see if I can reproduce the errors I got the first time.

View 9 Replies View Related

XP NTFS Versus Windows 7 NTFS?

Dec 1, 2011

I have a triple boot system: XP 32 bit, XP 64 bit, Win7 Pro 64 bit, each on a separate partition on separate hard drives. I can backup each of the XP OS partitions with a program I wrote that basically does a file and folder copy to a folder in a spare partition on one of the hard drives. The copy program I wrote tries to preserve time stamp and short file name info, otherwise, it's just a file and folder copy program. I use windiff to verify after a backup (or restore). For a restore, I can quick format a partition and copy the files back (using the program I wrote).

I tried doing the same with the Win 7 OS partition, backup, quick format, restore, but some of the information (metadata?) is lost. All of the actual data is there, and windiff doesn't show any differences, and Win 7 boots up, but then there are issues. ATI video driver catalyst control center fails to run (don't recall error message). The publisher information for many (or most or all) of the programs is lost, causing User Acess Control dialog box to appear anytime I tried to run a program,which should be Microsoft, but shows up as unknown. Internet Explorer 8 will state that a program has corrupted the default search provider repeatedly (even after selecting one).

So something is different between Win 7 NTFS and Win XP NTFS, or I need to enhance my copy program to copy addtional file information when doing the copies. If I get the time, I'll try a drag and drop from windows explorer in XP to see if that makes any difference.So currently I'm stuck using Win 7 system image backup for the Win 7 OS partition (it also images the C partition which contains the boot files like bootmgr).

View 6 Replies View Related

Windows 7 Raid 0 Setup / Missing Raid Controller Driver

Nov 19, 2011

Installed a new M4 ssd today and loaded windows on it. Previously i was using 2 raptors in raid 0 for the os and programs. I re raided the 2 raptors and connected them to the jmicron ports and set them up for raid in bios, then created the raid 0 array no prob. Windows doesnt see the array when loaded up and i have the latest rst drivers installed..did this prior to the os install on the ssd. using the x58 e760a1 mobo. under device manager, the raid controller has an exclamation mark and no driver installed yet i have the latest rst 10.8.0.1003 installed..

View 1 Replies View Related

Pci Sata 6 Raid Card That Has At Least 4 Slots For 4 X 2tb Hard Drives For A Raid 5?

Aug 24, 2012

I need a PCI SATA 6 RAID card that has at least 4 slots for 4 X 2TB Hard drives for a RAID 5

View 3 Replies View Related

Bios Change From Raid To Non Raid On Dell Xps435

Jan 1, 2013

I had one hard drive failed(640gb). I bought replacement and tried to restore image but it failed. Then I wanted to convert to non raid system. I changed both drives(640gb) to non raid and bios change in advance setup. I am getting error when I try to reinstall win 7, "setup was unable to create a new system partition or locate an existing system partition. See the setup log files for more information". I have deleted old partition many times but win 7 setup on this dell xps435 desktop won't install windows.

View 4 Replies View Related

Converting To Raid 0 Windows 7, Not Hardware Raid 0

Apr 25, 2012

I have tried to find the way to do this, but without success as I cannot see the wood for the trees.

I have a mature Windows 7 system, with so many applications loaded that rebuilding from scratch is just not an option. I have a 300MB Velociraptor wholly given over to the OS and another empty 300MB VR. I want to extend, that may not be the right word, my OS to use both disks in Raid 0.

View 2 Replies View Related

Raid Better With MB Config Or Separate Raid Controller

Aug 12, 2012

Which configuration would be better using mobo sats 2 raid or using seperate rid controller via pcie card Rosewill Rc-211 wsis3132) or should I use mobo for raid and card for extra sata w/o raid I have more drives than sata slots. How do I transfer data videos/Tv shows from existing drive to raid?

View 1 Replies View Related

Hardware RAID 1 To Windows 7 RAID 1

Jul 10, 2012

I have Win 7 Pro 64 bit installed on an ASUS P7P55D LE motherboard which supports RAID 0,1,5 and 10 using Intel Matrix Storage Technology through an on board Intel P55 chip set. The system was assembled in Nov 2009 using two Western Digital Caviar Black 750Gb drives in RAID 1 as Drive C:. (I now know from Western Digital Customer Service that I shouldnt have done that, but lets move on from there). Last December, an error message informed me the RAID array was broken and identified one of the 750 Mb drives as needing replacement. I happened to have a spare 1.5Tb WD Caviar Black at the time, so I pulled the 750Mb drive and replaced it with the 1.5Tb drive. Life was once again good. Then on July 4th (wouldnt you know) there was a repeat of the December 2011 error message telling me to replace the other original 750Gb drive. Okay so I had another 1.5Tb WD Caviar Black laying around (dont ask) and did a similar swap out. Thats when I emailed WD Customer Support asking about the 750 since their diagnostic software said the drives were fine. Thats when I learned that I should be paying lots more for enterprise quality drives if I want/need RAID. Well thats not what ASUS says in their advertising, but live and learn. All thats prologue, because my real question is whether its possible to break the hardware-based RAID 1 array and set up a Windows 7-based RAID 1 with the two 1.5Tb WD Caviar Black drives without having to reinstall Windows 7.

View 1 Replies View Related

SB600 ATI RAID AHCI Drivers? (BSOD On Boot If In RAID/AHCI Mode.)

Jan 6, 2009

anyways, my main drive is a RAID 0 with Vista x64, but I have a second HD that is a SATA 250GB, which I installed Windows 7 on. The only way I could get install to work was to switch my BIOS to IDE mode rather than RAID. I would of course though, like to be able to access my Vista drive from Windows 7 (and more importantly, not have to switch between IDE/RAID mode at all in the BIOS, it's a pain).

Now, the one odd this about this all is that the drivers I have for Vista (x86/x64 drivers) for this mobo's RAID controller WORK when loaded on installation to identify and install to the drive, but seem to not load or not work in any way once the first reboot on install occurs. Maybe this is because I installed from within Vista x64, though.

(Incedentally, my motherboard is an M3A Asus, using ATI's SB600 for a RAID controller)

I've tried loading the drivers from within Windows 7 while in IDE mode, but the install program won't let me. At first it didn't allow because of version restrictions, but then I altered the ini file to get around that, but it encounters some sort of error when installing and quits.

Any help that can be offered, would be grateful. I realise it's a beta and not a real release, so I can get past the BSOD from my odd setup, and I really am enjoying playing around with it so far. Very very impressed.

Edit: Just in case anyone thinks of suggesting me to right-click the inf file and install that way, already tried, won't allow for it.

View 0 Replies View Related

Can't Format FAT32 HD With NTFS

May 9, 2011

I have a second hard drive that is formatted FAT32 and I need to reformat it to NTFS so I can install Windows XP as a dual boot option. It shows 146GB of 148GB free space; however, when I open the drive it says "This folder is empty". I once had Ubuntu installed and reformatted the drive, but it may be hidden somewhere on the drive. I have tried to reformat by right clicking the drive letter and using the format command, but I get an error message "Windows cannot format this drive. Quit any disk utilities or other programs that are using this drive, and make sure no window is displaying the contents of the drive. Then try formatting again.". When I check the drive for contents using CMD it says "Volume in drive is New Volume Directory of D: File Not Found". When I try to format D: from the C: prompt, it says "Access Denied as you do not have sufficient privileges. You have to invoke this utility running in elevated mode." I am logged on as Administrator

View 6 Replies View Related

Corrupt Ntfs.sys File?

Jun 13, 2012

My computer crashed and then crashed again during the restart. Windows tried the start-up repair, did its self diagnosis and said I have a corrupt ntfs.sys file.How do I fix this? I have looked on the Win7 installation disk but did not find any drivers.

View 1 Replies View Related

Windows 7 BSOD Ntfs.sys

Jan 12, 2012

We have. Computer its 2.8ghz 2gb ram 1x2 dimmand 500gb hdd it has BSOD and hasnt worked for a month. NOTHING at all works tried every single way to get in it just says ntfs.sys page fault in nonpaged area i cand download amything do anything it loads to a bsod

View 9 Replies View Related

Getting BSOD That Cause By Ntsokrnel.exe And Ntfs.sys

Jul 15, 2012

i get random BSOD while playing my laptop. after doing some research and updated all my driver. this two causes of BSOD always pop out. my laptop model asus K42Jv, i5,4gb ram,and 64bit OS.

Code:
==================================================
Dump File : 071512-31465-01.dmp
Crash Time : 7/15/2012 6:49:13 PM

[Code].....

View 1 Replies View Related

How To Format NTFS Partition

Mar 23, 2012

on my netbook there is C drive which is FAT 32 and D drive which is NTFS. the thing is i have windows xp dualbooting windows xp (i know its weird). i am only using C drive so i want to format the D drive and merge it with C drive so i can have more space. the thing is it doesnt let me delete it. i tried using Easus Partition manager, but there was no delete option or anything like that. i cant use the CD because mine is a netbook. also booting from USB does not work because my computer is old and it doesnt support booting from usb in BIOS.

View 9 Replies View Related

Can't Convert FAT32 To NTFS?

Apr 29, 2012

I keep trying chdsk f: /f and it says its clean and fixes errors and then I go to Convert F: /FS:NTFS and it says I need to do chdsk

View 9 Replies View Related

Installation Error About Ntfs

Aug 19, 2009

Just decided to upgrade from SP3 to 7 today, downloaded, burned and now when i boot from disk. windows loads then an error pops up saying

"Windows failed to load because a critical , missing, or corrupt"

"windowssystem32drivers
tfs.sys"

Would appreciate the help if anyone can.

View 1 Replies View Related

Correcting NTFS Permissions?

Dec 7, 2012

Correct default NTFS permissions on disks after Windows 7 installation. May be is some tutorial how to tune permissions.

View 1 Replies View Related

Blackout Causes NTFS To RAW Format?

Mar 12, 2010

I have Windows 7 on my main machine and am using a spare drive right now. Power went out and when I turned my computer back on, it wouldn't start so I removed the HDD and plugged it into test computer which was when I found it had become a RAW file system.Alright, so basically I'm wondering how I should convert my RAW drive back into NTFS so I can use it again and I'm not interested in retrieving information as I had nothing of value on that drive, because all important stuff is on my storage drive - which is 1TB in size. I have tried a variety of methods including.

1. Using Disk Management, even though it recognizes it and shows it as a RAW format - I am unable to format it as it gives me a "Format could not be succesfully completed" error message, also deleting and making new partitions has no effect.

2. Tried using DOS to convert it from RAW to NTFS

3. Tried using programs like PTDD Partition Table Doctor and EASUES Partition Master to rebuild the partitions, fix the Master Boot Record and then convert to either FAT32 or NTFS (if it's FAT32 I'll convert it to NTFS afterwards)

4. Tried to format from the "My Computer" window via right-clicking and selecting "Format"

5. According to TestDisk I have 0 partitions and when I do a deep search it forks of a load of read errors. :

As far as I know, PPTD Partition Table Doctor tells me that there sector count is incorrect and that the MBR is in the the wrong section.If you want my system specifications, Here:

Windows 7 64-bit
AMD Athlon X2 6400+ 3.2GH
6GB DDR2 RAM 667
BFG GTX 260 (216) OCX
1TB Green Cavier Western Digital
80GB Seagate Barracuda (Now in RAW format)

View 10 Replies View Related

Recover RAW Partition To NTFS?

Dec 14, 2012

used gparted to copy partition from windows7 laptop to usb ext HD as ntfs partition. iam am able to view files and evrything ok. when i reboot into win7 it sees partition as RAW. its says i need to format it.

View 4 Replies View Related

How To Delete To Ntfs Windows 7

Jan 7, 2013

how to delete NTFS files in my hard drive E

View 2 Replies View Related

Windows 7 Installation Error Concerning Ntfs?

Aug 19, 2009

Just decided to upgrade from SP3 to 7 today, downloaded, burned and now when i boot from disk. windows loads then an error pops up saying"Windows failed to load because a critical , missing, or corrupt""windowssystem32driverstfs.sys"

View 1 Replies View Related

Access NTFS Volume From Another Computer?

Mar 23, 2011

I put a new hard drive in my ThinkPad T500 and installed Windows 7. I put the old hard drive, which has Vista installed into an external USB box. I can mount the drive, but there are some folders that I can't access. I also cannot seem to give "Everyone" access, or to take ownership. Is there some simple way to override the NTFS security settings?

View 4 Replies View Related

System Mirror Onto Non-NTFS Format HDD?

Jan 30, 2012

I have a new windows 7 64-bit computer and two 4-year old external Western Digital HDDs. They connect fine and transfer data okay except when i try to do a Windows system mirror.All was well with XP Pro and the same HDDs but Windows 7 tells me the HDDs are not formatted to NTFS.Firstly, what does this mean as i would really like a system mirror and secondly, is there a way round it withpout formatting the HDDs and losing all the data?

View 6 Replies View Related

Cannot Get Permissions To Convert A Drive To NTFS

Aug 29, 2012

Im trying to convert a drive on my laptop from FAT32 to NTFS as recommended by Microsoft baseline security analyzer. When I type in convert E: /fs:ntfs command in the cmd prompt I get a message that I dont have permissions to do so. How, on my own machine do I get permissions or what do I type in to get to root? I know that on Linux machines you type in su to enter password to get to root user but Im not sure how on my own windows machine. I am a 1st year IT student and am learning. I thought I had all the permissions since I am logged into my machine as administrator.

View 5 Replies View Related

Issue With Accessing 2 NTFS Partitions

Oct 19, 2009

I now have a problem with Win 7 (RTM edition) as follows:

I have SATA1 drive 500gb: 1 Primary, and 5 logical or whatever you call that. Of these, I only see 3 (2 are unassigned letters, and when I try to get there, I get the error "The operation failed to complete because the disk managment console view is not up-to-date. Refresh view by................" (obviously this doesnt work).

I also have the new SATA2 1TB hdd split into 4 partitions (one of them is the OS ones) as well as Disk0 which is older 120gb U-ATA hdd.

Obviously I mean the two rightmost partitions from Disk1.

Also, I copied everything from that partition to another new one using XP, then tried to format it - which failed with some error... anyway tried to format it from this screen as well in 7, but it gave another error: "An unexpected error has occured. Check the system event log blabla.

View 6 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved