did system restore no change to ntfs local disk.local disk changed to ntfs. cannot open local disk C:no windows action center, not working all including:Device Manager,Remote Settings,System protection not format.is there any other way except reinstallin OS again.My os is win 7 ultimate..
View 4 Replies
Im trying to convert a drive on my laptop from FAT32 to NTFS as recommended by Microsoft baseline security analyzer. When I type in convert E: /fs:ntfs command in the cmd prompt I get a message that I dont have permissions to do so. How, on my own machine do I get permissions or what do I type in to get to root? I know that on Linux machines you type in su to enter password to get to root user but Im not sure how on my own windows machine. I am a 1st year IT student and am learning. I thought I had all the permissions since I am logged into my machine as administrator.
View 5 Replies View RelatedI have had no trouble in the past setting up permissions on a NTFS formatted USB drive using XP. I am able to set everyone to have only read access and myself to have full rights. The process is as follows:
- Remove all from the list except everyone.
- add myself as a user with full control.
- Go to advanced options for everyone and disable write access, and enable read access.
- Deny takes over allow, so that's all good.
- Eject USB everyone's happy .
In Windows 7 this is not the case, after formatting the USB to NTFS and going to permissions, that is where the problems start. At first the only group that has permissions as default is everyone, if I change any of these permissions I get access denied even though I am the owner because I formatted the drive. So I ignore and continue to add myself as full control. I get access denied! I then move on to making it so that everyone has read access but no write access. again access denied! What is the same process ins XP is not the same in 7, why?
It seems every time I make an amend to a permission in 7 is says access denied even though I am the admin and the owner. Tried this also on the hidden admin account and I still have the same problem. My guess is in windows 7 everyone actually means everyone, including admin and myself, so even though adding myself as an additional user it still wont allow, unlike XP where adding a user seems to overwrite everyone.
Dose anyone know how to convert an external drive that was used for a mac to NTFS so it can be used with windows.
View 6 Replies View RelatedWell tomorrow I am receiving my SSD. And my external hdd is fat 32 and I can't backup some of my stuff because of the file size limit. I believe I need it to be NTFS but how do I change it from fat32 to NTFS?
View 9 Replies View RelatedCorrect default NTFS permissions on disks after Windows 7 installation. May be is some tutorial how to tune permissions.
View 1 Replies View RelatedI'm having a problem to convert my external hard rive to ntfs its showing raw it don't pickup the volume label. I whet into prompt also and it doesn't seem to see the hard drive. I tried so many stuff already.
View 1 Replies View RelatedMy hard drive has two partitions. The second partition - D - contains only data files (documents, pictures, etc.) My computer has 3 users - myself and two others. I am an Administrator and the other two are Standard Users.
The root of D has three folders:
D:user1 (that's me)
D:user2
D:user3
The NTFS permissions on each user's folders are as follows:
Administrators - Full Control
SYSTEM - Full Control
user - Full Control
This prevents the Standard Users from accessing anyone else's data but their own, while maintaining the right of Administrators (like me) to access everybody's data.
The NTFS permissions on the root of D (only) are as follows:
Administrators - Full Control
SYSTEM - Full Control
Authenticated Users - Read and Execute
If Authenticated Users does not have NTFS permissions on the root of D, I am denied access to D, even though I am an Administrator.If I double-click on the drive icon I get an 'Access Denied' message. However, if Authenticated Users is included in the NTFS permissions, I can open D by double-clicking on the drive icon.Why can't I access the root of D as an Administrator ... why does Authenticated Users need permissions?
I have an external hard drive that was formatted in NTFS on an XP machine not too long ago. It is a 160 GB Western Digital. It has been working great on windows 7 for a couple of weeks. Just today it won't let me access the drive and it is telling me that I will need to format the drive before I can use it. I have so much important data on here. I am really worried about losing it all. Why is this happening?
View 4 Replies View RelatedNew PC built from a bare bones machine url...Turned off the computer safely with 4 partitions In the morning will not boot.Tried to reinstall Windows 7, but I there is no drive available to select. Minixp lists the 4 drives just none accessable The drive shows up on POST and in the BIOS. ubuntu live finds the os partition and one other partition (able to extract those files. HDat2 says no errors Ihave confused the tech support people as the drive is clearly not dead. Since that Iran diskgenius via minixp
0 = RAID 992.5kb
1 = RAID 100mb
2 = RAID 48.7gb
3 = RAID 1.8tb Has it really turned RAID (WHY?) and how do I fix it?
I have a USB external hard drive that I keep all my documents etc on (had it for years)I upgraded from Vista Home to & Home Premium then had to upgrade recently to Professional to run my Sage. Through all these upgrades my ext. drive ran fine. Occasionally the drvie letter would change if I had something else plugged into the USB, this was always easily corected in disk management by changing the drive path.The connection on the case packed up so I had to get the drive put into a new case, now when I plug it in the drive is assigned G instead of F, I tried to change the drive letter allocation in Disk Management but it won't let me as the program still thinks I have a second ext. hard drive which is labelled F. I suspect this has happened because when the usb connection broke the drive was disconnected suddenly instead of a proper eject.How do I get Disk Management to remove the inactive drive - i can't find any obvious way - eject, delete etc are all missing when I click on tools or tasks.
View 2 Replies View RelatedMy laptop is Acer with Windows 7 home premium 64 bit OS. It contain only 1 single partition disk that is c drive only.Recently, i accidentally convert the c drive which contain OS into dynamic disk.After i restart the laptop, it shows the following: BootMgr is missing Please press Alt, Ctrl +del to restart Now, i not able to enter the window. I am so worry because my important data is kept inside the hard disk, and i still not yet do any back up copy on it.I searching on this forum and learnt that i need a window 7 installation disk to repair it, but my problem is the computer dealer not give me any windows 7 installation disk when i baught this laptop as their said all the driver and windows program already kept in side the harddisk.I tried to remove the laptop hardisk which is a 500GB toshiba SATA hardisk. Then, i use the other laptop with Windows XP professional with the intention to copy yhe file inside the toshiba hard disk.However, after plugged in the hard disk to the other laptop, under the disk management, it shows that the toshiba disk as : dynamic disk, unreadable.i having problem to backup the data inside the toshiba hard disk.....
View 8 Replies View RelatedI made a backup to external hard drive of my mother's computer, before a conversion to Windows 7.At home in Austin I have transferred the folders, files to my dual boot Vista/Windows 7. I notice that even after taking ownership of the backup, that looking over permissions I am the owner, also the Administrator of my computer, but I need to find a way to have the inherited from apply to my account, as it is clear that not all folders and files are visible.Does anyone know what I need to do so that the entire hard drive has permissions for me applied to all folders and files on that specific hard drive?It is not the boot or system hard drve. I want to make sure I am not just the owner, but any inherited permissions apply to all folders and fles with an NTFS file system.I used to have some script several years ago when I applied this to servers I was working with. I just need to do this with one hard drive and Windows 7.
View 1 Replies View RelatedWith NTFS and Share permissions is there any way I can allow a user to (in a specific folder):
- Edit and overwrite existing files (like a notepad file)
But
- Not be allowed to create new files or folders
I have spent quite a while staring at the special permissions screen. When reading about the meanings of the special permissions from the Microsoft, it says that the "Create Files/Write Data" permission allows for the overwriting of existing files but it also allows for the creation of new files. Is there some way i can have one without the other? Split the permission? I have also been told that there is a flaw to this as when you open a word document it creates a temp file in the folder where the word document is, and having permissions set this way would cause the word document not to be able to open because it couldn't create that temp file.
My PC was somehow configured so that I cannot copy files from the internal hard drive to a USB pen drive (e.g., to make a back-up).
When I try to do this, I get the following message: "Destination Folder Access Denied You need permission to perform this action."
There is definitely enough room on the USB drive. The USB drive is configured with a password, which I entered correctly after plugging in the drive. After doing this, I am able to see the files from the drive. The configuration is such that I can copy files from the USB drive to the PC's hard drive, but I can't copy in the other direction, which is what I need to do.
This sounds like a Windows permissions issue to me. I have taken ownership of the file in question, and I have assigned full control to that file.
My current problem is that it occasionally gives off a clicking noise, I am assuming that the problem is the HDD because there is nothing else that's moving in the computer (besdies the BD-ROM, but it doesn't count). I look onto the event viewer and every time this happens it shows an error in the log files. [code]
View 5 Replies View Related'installation directory must be on a local hard drive' Its not the msi as ive tested it on another computer.The msi is a plugin tool called t-splines by autodesk. Ive also tried older versions with the same error Things i've tried so far
sys restore
safe mode
right click - take ownership
I uninstalled 7zip which i already had, then reinstalled with the .msi from the website to test if it was all msi, however it actually worked I was looking around for other .msi install software just to test it but can't find any?
i needed to pawn my laptop for a short time and didnt want my files to be viewed by anyone while it was not in my possesion, so what i did i changed the file permissions of my c: drive so that only admin had fulll control and no one else. well now i cant access my c: drive with my admin accrt. nor will it let me change the file permissions either. also a hand full of other things will not work such as the internet explorer icon on the task bar or start menu but i can open i.e. from the recently viewd submenu from the i.e. icon on the start menu. also i can open files on my c: drive from any old shortcut icons i had left on my desktop but i cant acces them directly from explorer. so i found some work arounds but really need to get full control of my h/d.
View 6 Replies View Relatedi can't share full hard drive in windows 7 local network
View 1 Replies View RelatedI've had an xbox for several years now. A few years ago I set up my computer to stream music to my xbox. It was cool for awhile and it worked fine, but eventually I just stopped using it. Today I decided I would use it again, but I found that wasn't working. No problem, its been a few years and sometimes settings just get lost. I go out on the web to find a guide again that would tell me how to do it, which led me to [URL]. At the part where I name my library and hit "OK", my "OK" button is grayed out. I know I could try and set up windows media center again. Again, I went to Xbox's support at [URL]. Everything was set up fine and dandy and everything worked.
I get back on my desktop to check something in my "My Music" folder. I get the "You need administrative privileges pop-up", which i thought was weird but i hit continue and it worked fine. Now, whenever i try to open ANY folder, sub-folder, or file, not only does it try to tell me I need admin privileges, once i hit continue it says that i don't have permission to that folder, etc. I think that if I were to go in and reset all the permissions that everything would be fine, but I've got a pretty large library and it could take forever to do that. Is there a simpler way, or a setting that I can change so that Windows Media Center doesn't block me from my own files?
Everything was good with my hard drive but now the last time I opened my pc I noticed something really odd. In "My Computer" folder my Local Disk icon had changed. Instead of being an icon that displays a disk, it is an icon that displays something like a crab! What is that?! Is it some kind of virus? How can I change it to the default icon?!
View 1 Replies View RelatedRecently my computer's hard drives started clicking, both of them. I wasn't able to copy off my files or boot up as it would constantly freeze. So in order to save my data I bought a sata to usb cable to connect to my laptop to copy off the data. When I connected it I was able to save all my data and the hard drive didn't freeze one bit...a friend of mine suggested that it wasn't the hard drive but in fact the power supply that was causing it. Could it really be that or is my HD really dying or is it something else?
View 9 Replies View RelatedMy c: is ntfs and it have 200 gb space but not show any space. I want to it will show all space.
View 1 Replies View RelatedI had to use my thumb drive to upload files to a Mac, so I reformatted the drive to FAT32. Now I'm trying to get it back to NTFS so I can use again on my Win 7 machine, but the drive is not even showing up in My Computer.
The Drive shows in Device Manager and in Disk Management, but offers me no option to format.
I am running Win XP SP3 and I plan to upgrade to Windows 7. I currently have two hard disks as one is the system hard disk and the second drive is my data disk (E: Drive).If I upgrade to Windows 7, will I still be able to read the data on the E: drive? If Windows 7 can read the data, would it make sense to back up any files on the system hard disk to the E: drive so I could copy the files back to C: drive after Windows 7 install? All drives are currently NTFS.
View 18 Replies View Relatedmy Cyborg Rat 7 Doubleclicking instead of leftclicking once. I just got it today.
View 3 Replies View Relatedi cant access folder by direct clicking ,only by means of right clicking.but their is no message found.
View 3 Replies View RelatedI have a triple boot system: XP 32 bit, XP 64 bit, Win7 Pro 64 bit, each on a separate partition on separate hard drives. I can backup each of the XP OS partitions with a program I wrote that basically does a file and folder copy to a folder in a spare partition on one of the hard drives. The copy program I wrote tries to preserve time stamp and short file name info, otherwise, it's just a file and folder copy program. I use windiff to verify after a backup (or restore). For a restore, I can quick format a partition and copy the files back (using the program I wrote).
I tried doing the same with the Win 7 OS partition, backup, quick format, restore, but some of the information (metadata?) is lost. All of the actual data is there, and windiff doesn't show any differences, and Win 7 boots up, but then there are issues. ATI video driver catalyst control center fails to run (don't recall error message). The publisher information for many (or most or all) of the programs is lost, causing User Acess Control dialog box to appear anytime I tried to run a program,which should be Microsoft, but shows up as unknown. Internet Explorer 8 will state that a program has corrupted the default search provider repeatedly (even after selecting one).
So something is different between Win 7 NTFS and Win XP NTFS, or I need to enhance my copy program to copy addtional file information when doing the copies. If I get the time, I'll try a drag and drop from windows explorer in XP to see if that makes any difference.So currently I'm stuck using Win 7 system image backup for the Win 7 OS partition (it also images the C partition which contains the boot files like bootmgr).
How to release a lock by ntfs in c drive in windows 7
View 1 Replies View RelatedI have changed the permissions for the access of files and folders in the security tab of given in the properties of the Hard Disk Partition.Now I other users of the same computer cannot access the drive or make changes there. I tried hard to solve the problem but the output is "Access Denied". Any way to make this permissions to its default(or The normal state which it was). My OS is Windows 7 Ultimate x64
View 8 Replies View Relatedmy asus eee pc 1005p netbook's hard disk 250 gb was broken so it was replaced by a new 160 gb hard disk and install windows 7 ultimate on it. everything went fine except for my touch pad and intel VGA. I already tried to download and install different programs: For the touchpad: from ASUS website download: ETDWare setup application (ETD8_0_5_3_ps2drv_WHQL and TP-S-13_2_6_1) and also Synaptic (Synaptics_v14_0_16) but still the touchpad won't work!
And for the intel VGA: VGA-TNM10-V8_14_10_1929_Win7, VGA-V8_14_10_2117 both from ASUS download center Intel_VGA_Pineview_Driver_V814_10_2364_for_W7 from intel download center I wanted my touchpad to work and improve my VGA..
