Well tomorrow I am receiving my SSD. And my external hdd is fat 32 and I can't backup some of my stuff because of the file size limit. I believe I need it to be NTFS but how do I change it from fat32 to NTFS?
View 9 Replies
I am using windows 7 65 bit sp1, I have a number of films on pc of granddaughter and to save putting them onto DVD I have put them onto an external HD which is NTFS, I have tried to link it up to my freesat box which has a usb port, TV hasn't, unfortunately the box wont accept the NTFS sile system, have tried changing to exFAT, again this isn't accepted, tried friends ex HD which is FAT, (FAT32)? and this works, can I change my ex HD to then old FAT system?
View 6 Replies View RelatedI'm having a problem to convert my external hard rive to ntfs its showing raw it don't pickup the volume label. I whet into prompt also and it doesn't seem to see the hard drive. I tried so many stuff already.
View 1 Replies View RelatedI have an external hard drive that was formatted in NTFS on an XP machine not too long ago. It is a 160 GB Western Digital. It has been working great on windows 7 for a couple of weeks. Just today it won't let me access the drive and it is telling me that I will need to format the drive before I can use it. I have so much important data on here. I am really worried about losing it all. Why is this happening?
View 4 Replies View RelatedI have a second hard drive that is formatted FAT32 and I need to reformat it to NTFS so I can install Windows XP as a dual boot option. It shows 146GB of 148GB free space; however, when I open the drive it says "This folder is empty". I once had Ubuntu installed and reformatted the drive, but it may be hidden somewhere on the drive. I have tried to reformat by right clicking the drive letter and using the format command, but I get an error message "Windows cannot format this drive. Quit any disk utilities or other programs that are using this drive, and make sure no window is displaying the contents of the drive. Then try formatting again.". When I check the drive for contents using CMD it says "Volume in drive is New Volume Directory of D: File Not Found". When I try to format D: from the C: prompt, it says "Access Denied as you do not have sufficient privileges. You have to invoke this utility running in elevated mode." I am logged on as Administrator
View 6 Replies View RelatedI keep trying chdsk f: /f and it says its clean and fixes errors and then I go to Convert F: /FS:NTFS and it says I need to do chdsk
View 9 Replies View RelatedHow to Convert a FAT or FAT32 Volume to NTFS in Windows 7 ?
View 0 Replies View RelatedI have a couple of flash drives I have formatted to NTFS. One for an install drive and one for a readyboost test. If I formatted the drive in CMD do I have to format it the other way (to FAT32) in CMD or can I just right click the flash drive and format it there?
View 3 Replies View RelatedHow do I convert with command prompt comes up CDocumenand Settings/charlie> and not just C:?
View 5 Replies View RelatedDose anyone know how to convert an external drive that was used for a mac to NTFS so it can be used with windows.
View 6 Replies View Relatedi've purchased a seagate 1TB external hard drive and need to format it in FAT32 format.
View 9 Replies View Relateddid system restore no change to ntfs local disk.local disk changed to ntfs. cannot open local disk C:no windows action center, not working all including:Device Manager,Remote Settings,System protection not format.is there any other way except reinstallin OS again.My os is win 7 ultimate..
View 4 Replies View Related.I didn't wait for the computer to tell me it was ok to remove the drive in the usb port. Now my computer no longer recognizes the external drive After removing my external hard drive (without the ok) my computer no longer recognizes the external hard drive. What do I do.
View 1 Replies View RelatedI just ordered an external enclosure for my 3.5 80GB HDD, which is a FAT32 drive with all my old MP3's on it.What I was wondering is , of course, will it run, by USB, in my Windows 7 64bit environment......or can I at least pull the files off of the FAT32 HDD and somehow put them on my Windows 7 64bit system?
View 2 Replies View RelatedI have an internal hard disk not in use ,and I would like to make it as external disk !I looked on the net and I found I should have the " encelsure " butt I think I wont find it here in my city .So is there another way ? like usb -esata cable
View 3 Replies View RelatedMe and my brother built me a new computer from scratch (he did the building - i did the watching). I purchased an internal hard drive from Overclockers UK. It's a Samsung 1TB drive. I also have a 64 Solid-state drive in there as my primary hard drive that Windows was installed on and a couple of programs are installed on. My storage disk (the 1TB disk) is for all my music/films etc. Whenever I drag and drop a file into the Samsung hard-drive - it copies it rather than moves it instantly.When I had a laptop, I had 3 external hard drives and this is the way it copied files onto them.how I can get the internal drive to stop acting like an external drive?
View 6 Replies View RelatedI have a USB external hard drive that I keep all my documents etc on (had it for years)I upgraded from Vista Home to & Home Premium then had to upgrade recently to Professional to run my Sage. Through all these upgrades my ext. drive ran fine. Occasionally the drvie letter would change if I had something else plugged into the USB, this was always easily corected in disk management by changing the drive path.The connection on the case packed up so I had to get the drive put into a new case, now when I plug it in the drive is assigned G instead of F, I tried to change the drive letter allocation in Disk Management but it won't let me as the program still thinks I have a second ext. hard drive which is labelled F. I suspect this has happened because when the usb connection broke the drive was disconnected suddenly instead of a proper eject.How do I get Disk Management to remove the inactive drive - i can't find any obvious way - eject, delete etc are all missing when I click on tools or tasks.
View 2 Replies View RelatedLow disk space, Can transfer data on D drive to an external hard drive
View 5 Replies View Relatedgot my new PC with Win7 64bit.I work from home and have all my work related correspondence on an external drive secured by Truecrypt. I used to back this up nightly with Vista without problem, but now I find that Win 7 won'tlet me.Does anyone know a way around this, or software that will do it
View 3 Replies View RelatedI have an external drive that does backups of files for me on a weekly basis through windows, needless to say the backup was getting bigger so I decided to go for a better data storage solution and formatted the external into NTFS. While doing this I also decided to format a USB key into NTFS.THE external drive format took hours, four or so hooked up via firewire. I blamed the issue on the drive and ignored it for the next couple of weeks. The backups didn't work properly they stopped halfway according to Windows even if I let them run 12+ HOURS. Before I formatted it took only 2-3 hours for the backup. I blamed the entire issue on the drive, maybe time to replace it, but I didn't have time to mess with it cause it was simply annoying me.Didn't use the key until tonight. Remember it is formatted as NTFS also. I started to copy a movie file to it, 700mb, it stopped at nearly 89% with 5 seconds left and did not move one bit. I hit cancel and it stayed on the cancel screen for 10 minutes with no resolve. At this point I tried to open a firefox window and it was not responding.......so what did I do I pulled the key and just like that Firefox window popped up and all was well. At that point it hit me, but the external storage solutions are NTFS, could it be my Mobo? Surely not!, Oh Microsoft you make me sad again....Just like with Vista. I reformatted the USB key back to FAT32, transferred a larger 1.4gig file in about 2-3 minutes and had no hangup issues. I can't blame the issue on the mobo especially since it relates to both USB 2.0 connection and the FireWire has the same issue. I guess windows 7 64bit doesn't like external NTFS connections. My windows appears up to date!
View 7 Replies View RelatedI can see my external hard drive in device manager, but not in my comp
View 3 Replies View RelatedI just got an external hard drive yesterday, and have been asking a few questions on this forum. So far, people have managed to be very helpful with the previous questions, hopefully someone can do so here too.Reinstalling all my games to external hard drive, need to know if they will / how to make them appear / function properly in my GEF, whether added automatically or manually.I am basically going to have EVERYTHING put onto my 1TB external, and by everything I mean "Music, Pictures, Videos, Documents, Games, and maybe Programs". So, I made a folder for each of those things on it,and only now that I am reinstalling my games into the Programs one have I realized something.I am a bit obsessive about having a fully functioning Game Explorer Folder (GEF) with all my games visible in it. It's my assumption that when I install into an external hard drive, none of those games will be automatically added into the GEF. However, if I add them in manually (using the regedit method in the tutorial), should everything function properly, so long as I have my external hard drive on whenever I use the computer?I just need this to be confirmed before I start reinstalling more. Also, if not, please let me know if there IS a way to get them to show up in my GEF properly, or possibly move the GEF to the external hard drive or get it to recognize things from a different directory.
View 6 Replies View RelatedIn order to make upgrading via a clean install easier -- and because I've been considering one for awhile anyway -- I'm looking at picking up a decent external hard drives right now... and can't seem to find a clear answer to something:
Will I see any drop off in quality of playback or computer performance if I use a drive like this (external, USB) to store all of my recorded videos. The tuner and Media center would save everything directly to this drive and play everything directly from it. Would that cause any problems at all? I notice that it requires no power adapter since it's USB powered, and it has a Interface Transfer Rate of 480 Mbps -- not sure how either of these apply to my potential use of it.
if I could use my external hard drive to install windows 7 on a new build with a new hard drive?
View 2 Replies View RelatedI've got a corrupt file on my TomTom ONE Third Edition. TomTom support has been unhelpful, and Google has let me down for the last 2 hours. I've tried programs like ChkDsk, Move On Boot, Unlocker, and FileASSASSIN.
I am running Windows 7 Ultimate, and the file that needs to be deleted is ttsystem.
Attached an external sata hd with an esata connection. After power boot, external drive not recognized and also secondary internal sata hd not recognized.
Do I need to do something to the BIOS?Sinch stonooka has chosen the best answer to his/her question.Click here to view the answer that was selected.
My windows vista computer died. I have backed it up on and Iomega external hard drive but can't figure out how to restore the information to the new computer which is a windows 7.
View 12 Replies View RelatedWhenever I power up my computer, my external hard drive does not always come on line. I have to unplug and replug it for it to come on line.
View 1 Replies View RelatedI just got a new Packard bell go external hard drive which I used for a couple of days with no problem. btw it has never fell or had any physical damage. I plugged it one day into the PC and it couldn 't be detected in my computer. it shows up in devices and printers and also in disk management. I read on some forums to try and initialize it but it gives me an error saying cyclic redundancy check. I 've tried everything but still not working. this is a new hard drive which has never fell and no physical damage. and please don' t tell me to return it cos it was bought in another country. the only option right now is to fix it?
View 14 Replies View RelatedRunning Win 7 home, acer 1800.About a week ago I installed a Buffalo 1.5 TB external drive and automatic back up package, it was working very well, however it now shows as " Not Connected".I have replaced the usb lead but no change in status.It is also no showing up with other drives?Any one had this problem and found a fix?I did a search but found nothing quite like this.
View 2 Replies View RelatedI have a 2TB Seagate hard drive that keeps dropping out in Windows 7. I use it as my main backup drive and when writing to it using either of the two backup apps I use the drive usually "disconnects" and I have to switch it off and on again to use it.I've tried using a different USB port and a different USB cable - same thing. I have run Windows 7 error-checking checking which reports no errors.When it disconnects, device manager shows that it is still connected and working but it definitely doesn't work. For instance, I can double click and open it but it shows no folders. Switching it off and then on fixes this but only temporarily.
View 2 Replies View Related
