Windows 7 Could Not Format A Partition On Disk 0.Missing Operating Syste?
Dec 25, 2012
Yesterday evening I was having computer problems so I decided to do a clean reinstall of WIndows 7. I cleaned out some partitions and then tried to put WIndows 7 on the fresh partition. The process began and then I got a mesage saying that Windows cold not format a partition on disk 0. This error occured while preparing the partition selected for installtin. Error code 0x80070057I also get a message when I restart the computer saying ¨Missing Operaing system¨ I´m guessing that that means I cant log in to fix this problem
View 3 Replies
ADVERTISEMENT
Jul 6, 2011
I just got a new hard drive and a dvd drive because both my hard drive and dvd drive both died. So I got it all set up in my comp and everything seemed to be going fine but I keep getting the windows could not format a partition on disk 0 The error occurred while preparing the installation. error code 0x80070057.
View 5 Replies
View Related
Aug 4, 2011
I've just purchased a new desktop Extra Value Desktop PC - Desktops | Ebuyer.com along with an OEM Windows 7 64bit. This is a fresh install on a brand new PC. Every time I get the same error message "windows could not format the partition on disk 0. The error occurred while preparing the partition selected for installation. Error code: 0x80070057". I've just removing RAM and still same problem. Even tried install XP and after 3 hours fomating the drive it it came up with this error ""Setup was unable to format the partition. The disk may be damaged."
View 9 Replies
View Related
Jul 15, 2010
I am trying to do a clean install of windows 7 onto my laptop, and I keep getting the error, "windows could not format a partition on disk 0. The error occurred while preparing the partition selected for installation. Error code: 0x80070057" . I have reformatted the hard drive and tried clicking next from there. This is the 64-bit version of windows 7
View 9 Replies
View Related
Mar 22, 2011
A couple of weeks ago a storm blew through and knocked out my power for a moment, then it came back on. Within a few seconds, another wind gust and it ripped our power lines down.Got power back a few days later, and have been busy trying to fix this on my own but to no avail.
My computer booted into system recovery tools, start up problem fixes etc. none of them worked, leading to the decision to format my SSD and try to reinstall windows 7. I get to "windows is copying files" and it stays stuck at 0% for about a minute or two, then I get "Windows could not format a partition on disk 1. The error occured while preparing the partition selected for installation. Error code: 0x8007057.
I concluded that I should try deleting the partition and creating a new one. That however, got me this message:Failed to delete the selected partition. [Error: 0x8007017].So I decided to try and format the drive, to this result:
Failed to format the selected partition. [Error: 0x8007057].
Same result as when I was trying to install. Puzzles me! I've still got a lot to learn.I've tried removing unnecessary RAM, same results.Having the same problem with a Vista 64 bit install disk, and have tried to install on my SSD and HDD with no differences.
System:
ASUS Sabertooth X58 MoBo
Core i7 920
6gb DDR3 1600mhz corsair RAM
RiDATA 32GB SSD (OS drive)
1TB Western Digital HDD
and one other 500GB HDD (I forget the brand)
View 5 Replies
View Related
Apr 29, 2012
basically a bad partition will not allow me to wipe the computer clean, boot XP from the drive or add/change bios screen...i don't have tje kind of cash to buy or pay for repairs. what can i do?
View 1 Replies
View Related
Feb 28, 2011
How to Fix Missing Vista Hard Disk Partition Letter in Windows 7 ?
View 0 Replies
View Related
May 26, 2012
In my Sister's laptop, running Windows 7 Ultimate x86, all of a sudden, while she was working on the computer, the "E drive" went missing which was a partition on the hard disk (I don't remember if it was a logical or primary partition). She tried restarting the system but to no avail. So, I told her to open the "Disk management" tool in Windows 7 to see if the partition is visible in there. I did this because sometimes, in my computer, my expansion drive wouldn't show but it would be visible in the disk management tool and all I had to do was to re-assign it a drive letter. But, in this case, it wasn't visible over there.
So, now I told her to download "Mini-Tool Partition manager Home edition" and install it on her laptop. On running it, it wouldn't show the partition either. It would just show "C:", "D", "System Reserved" and unallocated space. However, when I added up the size displayed by C:, D:, System Reserved and Unallocated, it doesn't add up to the actual hard disk size. It means the partition is somewhere there but not visible. Is it possible that the partition would show up correctly if the laptop is booted into the bootable image of Mini-Tool Partition Manager?
View 5 Replies
View Related
Jan 20, 2011
Awhile ago I got myself two SSD drives and installed Windows 7 on one of them. I didn't move over my OS from my old 1TB drive or anything I just did a clean install. Today I finally finished making sure I'd transfered over all my files from the disk and I was about to format it when I got the message that can be seen in the above picture. It seems the old Windows (D: drive) is still set as the System drive and my new Windows OS (SSD C: drive) is just set as Boot but not System.
This makes me unable to format it and I have no clue on how to fix this. Does anyone know how I can give my new SSD drive the System status so I can format the old drive?
View 8 Replies
View Related
Feb 2, 2012
I have a 1TB hard drive partitions into a C drive and D drive. The operating system is Windows 7 64 bit. The C drive is my every day stuff, and I use D to store media, music, video etc. Today I wanted to access the D drive and it was not there. The C drive is listed as usual. I went to Disk Management and the missing D drive was not there as well. I don't know if this explains things, but I ran a partition analysis program and it showed 500 gigs as unallocated. But that space is also not noted in disk management. Right now I am running partition recovery software to see if the files are somewhere, but it will take a few hours.
View 2 Replies
View Related
Aug 29, 2012
Can I format a Hard Drive with Windows 7 using a 2000 format disk. If so, what are the prompts i see and action on boot-up before I use the format C. Done it before but just forgot
View 4 Replies
View Related
Feb 28, 2012
I am using windows 7 64bit and I want to install Fedora along with the windows.I partition my drive D: to 100GB which is total of 238GB of size for fedora O.S I partition it by this process.My computer--> right click--> manage-->Disk management. And then I shrink the new volume. The new drive will be created as I:But when I am going to install fedora. It didn't show that newly created drive i.e I:Why it is happening. I format that drive many times but nothing works. All it shows me in fedora that 238GB drive.Is there is a mistake in partition?The partition format is NTFS?
View 4 Replies
View Related
Jun 6, 2011
Table top, Acer brand, Aspire M5700HDD: 500GBPart: 1. Hidden partition, 20GB, eRecovery2.Partition C partitioned by Acer, 240GB, OS3. Partition D partitioned by Acer, 240GBI plan to format both C and D partitions and make 4 partitions.So, check with Acer firstAcer's reply is confusing, saying that the hidden partition will be damaged if format C partition
View 9 Replies
View Related
Aug 29, 2010
I am getting the "Missing Operating System" message on boot. Here is the strange thing...if I change the boot order in the BIOS and have CDROM first and choose not to boot off of it Windows 7 loads fine. If I put HARDDISK first then I get the missing operating system message. I have tried running CHKDSK, BOOTREC and the plain old Windows repair util. None of them have worked.
View 4 Replies
View Related
Dec 25, 2012
I am building a computer for the first time ever. I turn on the computer, the BIOS screen flashes and then a black screen appears displaying the text "Missing operating system." I am booting my Windows 7 from a flash drive,
View 4 Replies
View Related
Mar 16, 2011
I have a Dell Inspiron 15. I can run Oblivion on my computer, but I can't run Fallout 3. It installs fine, but when I get to the starting menu and try to start a new game, it crashes.
View 1 Replies
View Related
Oct 31, 2011
i tried all functional keys boot setup but it didn'nt work
View 1 Replies
View Related
Jan 22, 2013
I built my computer a few months back, and it worked just fine. About three months ago, I got two 3TB and put them in RAID 0 along with my four SSDs (which were also in RAID 0). When I hooked up my hard drives, Windows stopped booting. It installs, but when it restarts to finish the installation it says "missing operating system." I tried reinstalling it in every way imaginable: With only one of the hard drives, no RAID, just one SSD, using the hard drive, using a USB dvd drive, etc.
the parts:
Cougar GX 1050W
Z77A-GD65
i7 3770K
GTX 680
32 GB RAM
4x 120GB SSDs in RAID 0
2x 3TB hard drives in RAID 0
LG 14x BluRay drive
View 5 Replies
View Related
Jan 27, 2013
i recently installed Ubuntu 12 to run alongside my windows 7 home premium. I later uninstalled Ubuntu and now whenever i boot up it says missing operating system.
View 2 Replies
View Related
Aug 29, 2010
Shut down PC last night, all working perfectly. Today it won't boot with the "missing operating system" message. Have booted from Windows 7 installation disc, tried startup recovery - took 2 hours before reporting no automatic fix possible. It cannot find an installed Windows OS to do a system restore, so I attempted a "custom" clean re-install. However, I then get a "canot create system partition or find existing one" error message. I have tried to create a "New" one but nothing doing. I don't seem to have any HDD drivers to point to either.
View 9 Replies
View Related
Oct 11, 2011
I'm an IT proffesional, currently going learning for my Configuring Windows 7.I used windows 7 since the first beta came out, and I must say, I never was dissapointed by it.But because I am learning I am trying to get all the computers here running windows 7, and I have a computer in my office wich I am trying to install it on.There are a few problems thoug:The computer only has a CDrom player, and cannot boot from a usb device.When I first got it, windows XP was installed, and it only had 750 mb of memory. Stupid as I was, I decided to give it a try anyway installing windows 7 from inside Windows XP using an external DVD player connected with USB.This failed, and gave me lots of error so I tried the next step.
As It cannot find a network share I had to instal windows PE on a CDrom and from there I could acces my extrernal HDD where I had a clean copy of windows 7 on as INSTALL.wim. I cleaned everything, and created everything from scratch with succes. Image X worked, and BCDboot worked. So it seemed to go great.After restarting my system, it still will only give me, Missing operating system.I tried to search on the internet but couldn't really find something related to my problem.In the bios it says I can start from IDE CD-rom device, Diskette drive, Hard-Disk Drive c:, Integrated NIC (Disabled)I bought some different memory and I am now at 1.5 mb DDRIt is an Intel Pentium 4 processor 2.4 Ghz Level Cachge 512 Integrated.It's a DELL Optiplex Gx260 Series.
The boot menu gives me:. Normal2. Hard-Disk Drive C: (Wich I used for my 100mb) (And I used D for my big partition and with BCDboot I used D:WindowsSystem32cdboot d:windows /s D: ) Wich worked because he did copy the files.
View 3 Replies
View Related
Jul 16, 2011
I have two windows on my system, one in drive C and another in drive D. Both are windows 7. Now, I want to format the partition D but I cannot. could u please help me in this issue? I want just keep the windows in drive C and format all thing of drive D...
View 3 Replies
View Related
May 27, 2012
why does Windows 7 want always format a truecrypt partition? i have an external hard disk 2 partition ntfs file system 1 was encrypted with truecrypt 32bit under Windows 7 32bit everytime , Windows 7 pop up with a request to format the drive.i don't auto mount the partition, i mount the partition always when i need so when the partition is not mounted , Windows 7 asks me to format.
View 2 Replies
View Related
Jul 1, 2010
I'm using Compaq Presario CQ40-627TUMy Laptop SpecIntel Dual Core Processor T4400 (2.2GHz, 80Mhz FSB,1 MB L2 Cache)- 2048MB 800MHz DDR2 Memory- 320GB 7200rpm Hard Disk Drive- 14.1' TFT WXGA High-Definition widescreen LCD panel with brightviewtechnologynd i'm using windows 7 Ultimate on boot system partition C, dual boot with linux mint. which mean i got four partition. one for linux mint. one for its swap space. one for windows 7. one for my data storage(movies,drivers,mp3,picture and etc).last few days i try to resize my C partition (120gb) to make it smaller to gain some unallocated spaces and resize the D partition because my D (almost 100gb) (ntfs/primary/data storage) almost full. i use easeus partition master v5.01.
After done resizing and restart i can't see any D partition. so i was worried that my data will disappeared. i try to look for it but there is no Drive D even on the easeus or diskpart. the only drive appears was C Drive.i remove my Linux Mint and its swap (60gb) and thinking that i could get some more free space and do some cmd prompt windows 7 repair fixmbr thing to remove the grub. then i use partition recovery to transfer those missing data from partition D to C Drive. (appears as unformatted)i try to use partition wizard home to resize it back to 300gb. and it works. but i cant make a partition. it will disappear just like that.i also try to use diskpart,command prompt diskpard, and paragon. but also not working. the C drive was shrink but theres no unallocated space and no D drive (the new create partition). i try logical partition,primary,ntfs and fat but also not working. even the unallocated space also gone. i use almost 4 3rd party partitioning software but still got no luck with it.example:i divide 300gb into 2 partition which exist the C partition 150Gb but the other one gone. i wish theres other way than format. i also done many time. doing check disk, partition table doctor, searching for bad sector. but no errors with my hdd.
View 9 Replies
View Related
Jun 7, 2011
I have suddenly received the message "missing operating system" on two occasions but don't know why it happened.
I tried turning the laptop off to no avail. I discovered the only way to continue using my laptop was to press "CTL, ALT and DELETE" about five or six times.
View 1 Replies
View Related
Sep 3, 2011
It says ''Missing operating system'' on boot up windows 7 after trying to turn it off manually (which means the turn on button)
View 2 Replies
View Related
Jul 17, 2011
Recently, after trying to format a memory stick I have encountered some problems:
- After right clicking on the stick or on a partition and selecting format, nothing happens. Literally nothing, its like I didn't press it.
- Another a bit troubling issue, is that when I tried to scan with my antivirus, I get that the scan engine cant initialize, although the whole software works. I am using Bitdefender Internet Security 2010
I am currently scanning with ESET Online Scanned for viruses, to be sure I don't have a nasty one, but from what I see is that other then that, everything works fine. Finished the scan, with no issues. Also the troubling memory stick, i went to another PC, and was virus free and also was easily formatted. So i am afraid is something related to the system or something like that.
View 5 Replies
View Related
Oct 4, 2012
but i was wondering do i delete the partition and then create a new partition or do i format it? (see picture)
View 6 Replies
View Related
Nov 5, 2011
I had to install windows 7 in my pc.....bt while installing a message always shows up saying "windows could not format a partition on disk 0.an error occured while preparing the partition for installation.error code 0x80070057"my hard drive is samsung HD502H(500GB) and have a partition of 93.1GB.
View 1 Replies
View Related
Jul 10, 2011
I wanted to create a new partition to try out linux. So I decided to shrink E: by 20 GB. I then formatted the free space into a new drive by right clicking and creating new simple volume. I was warned that the drive would be made "simple", but not knowing the implications, I went ahead with the procedure. Now on rebooting, windows won't load. I had made a repair disc, so was able to use it to check for any start up errors. It reported none. Moreover I used "diskpart" through cmd to find volume c: is dynamic.
View 1 Replies
View Related
Jun 21, 2011
I am on my grandparents desktop, and they recently had me dual boot Windows 7 onto their Windows XP machine, and they now no longer need XP anymore. The XP partition is listed as a System, Healthy, Active, Primary partition. The 7 partition is listed as a Boot, Active, Healthy, Logical partition. How can I delete/format the XP partition and make the Windows 7 a primary partition? I have tried by using Disk Manager, and Eauseus Partition Manager, but it won't let me convert it to primary, or format the XP partition.
View 14 Replies
View Related