Multiple Error Codes - "Windows Could Not Format A Partition On Disk ?

Mar 22, 2011

A couple of weeks ago a storm blew through and knocked out my power for a moment, then it came back on. Within a few seconds, another wind gust and it ripped our power lines down.Got power back a few days later, and have been busy trying to fix this on my own but to no avail.

My computer booted into system recovery tools, start up problem fixes etc. none of them worked, leading to the decision to format my SSD and try to reinstall windows 7. I get to "windows is copying files" and it stays stuck at 0% for about a minute or two, then I get "Windows could not format a partition on disk 1. The error occured while preparing the partition selected for installation. Error code: 0x8007057.

I concluded that I should try deleting the partition and creating a new one. That however, got me this message:Failed to delete the selected partition. [Error: 0x8007017].So I decided to try and format the drive, to this result:

Failed to format the selected partition. [Error: 0x8007057].

Same result as when I was trying to install. Puzzles me! I've still got a lot to learn.I've tried removing unnecessary RAM, same results.Having the same problem with a Vista 64 bit install disk, and have tried to install on my SSD and HDD with no differences.

System:

ASUS Sabertooth X58 MoBo
Core i7 920
6gb DDR3 1600mhz corsair RAM
RiDATA 32GB SSD (OS drive)
1TB Western Digital HDD
and one other 500GB HDD (I forget the brand)

View 5 Replies


ADVERTISEMENT

Windows Could Not Format A Partition On Disk 0 - Error Code 0x80070057

Jul 6, 2011

I just got a new hard drive and a dvd drive because both my hard drive and dvd drive both died. So I got it all set up in my comp and everything seemed to be going fine but I keep getting the windows could not format a partition on disk 0 The error occurred while preparing the installation. error code 0x80070057.

View 5 Replies View Related

Windows Could Not Format Partition On Disk - Error Code 0x80070057

Aug 4, 2011

I've just purchased a new desktop Extra Value Desktop PC - Desktops | Ebuyer.com along with an OEM Windows 7 64bit. This is a fresh install on a brand new PC. Every time I get the same error message "windows could not format the partition on disk 0. The error occurred while preparing the partition selected for installation. Error code: 0x80070057". I've just removing RAM and still same problem. Even tried install XP and after 3 hours fomating the drive it it came up with this error ""Setup was unable to format the partition. The disk may be damaged."

View 9 Replies View Related

Windows Could Not Format A Partition On Disk 0. Error Code: 0x80070057

Jul 15, 2010

I am trying to do a clean install of windows 7 onto my laptop, and I keep getting the error, "windows could not format a partition on disk 0. The error occurred while preparing the partition selected for installation. Error code: 0x80070057" . I have reformatted the hard drive and tried clicking next from there. This is the 64-bit version of windows 7

View 9 Replies View Related

Multiple Error Codes On Windows 7 Update?

Aug 1, 2012

I have just recently built a gaming machine and I have had this problem ever since I first installed Windows 7 Home Premium x64. When ever I try to update I get error codes 800736B3, 80004005, and 80070002. I have tried Windows Fix-It, and SFC. I have also noted that most of my problems are with security updates.

[code]...

View 8 Replies View Related

BSOD Multiple Error Codes?

Apr 20, 2012

i've been getting BSOD for about 2-3 weeks now since updating some drivers on my laptop and it is really annoying. I have Windows7_Vista_jcgriff2 with all the required files needed for someone to look at.

System Specs: Windows 7

- x86 (32-bit) or x64 ? x86
- the original installed OS on the system? No was originally Windows 7 Home Premium
- an OEM or full retail version? OEM
- What is the age of system (hardware)? 3 years
- What is the age of OS installation (have you re-installed the OS?) 6-7 Months

View 5 Replies View Related

Frequent Random BSOD, Multiple Error Codes?

Dec 6, 2011

About a 2 month ago I built a new PC, installed a fresh copy of win 7 x64 and started getting random BSODs. It only happened once/twice a week but has started happening more requently, 5 times in the past 4 days. I've done several MemTests (both slots, single slot, different RAM in each slot) and no errors have come up. I've tried to the best of my ability to update my drivers but I may have missed something. Also, the bugchecks are not consistent (1e, 7e, 3b, ect) although 1e and 3b are the most frequent.

System Info:

CPU: i7 2600k 3.4 Ghz (2 months old)
MoBo: Asus P8H67-MLX (2 months old)
RAM: 2x Silicon Power 4Gb DDR3 1333 (2 months old)
Graphics Card: Zotac GTX275 (18 months old)

[code]....

View 5 Replies View Related

Random BSOD Even When Idle Multiple Error Codes?

Dec 19, 2011

New to the forums and really hoping someone could help. I have been having multiple BSOD over the past few weeks at random points, sometimes under load while playing games other times just when the machine is idle or simply logging into windows..I am running 16GB of Corsair Vengeance ram (2x8GB kits, so 4x4gb sticks in total) I have run memtest overnight with all chips in, just the one set (tested both sets) and also each chip individually with no errors. I have also swapped the chips into different slots and still getting BSOD.I have checked the BIOS and all memory config and voltages are as per spec. I have also monitored my voltages from PSU and those are within the acceptable ranges. Temps have been good aswell with CPU idel at aroun 30 with a max of 65 (Core i7 2500K) GPU's are running between 30 - 80 degree's (GTX 580's in SLI)I have also tried updating drivers but still cant shake these nasty BSOD's

Full Details

- Windows 7 Ultimate x64
- original installed OS on system - Yes first install
- full retail version
- age of system (hardware) - Less than 3 months (complete system)
- What is the age of OS installation - Less than 3 months

View 4 Replies View Related

Windows 7 Could Not Format A Partition On Disk 0.Missing Operating Syste?

Dec 25, 2012

Yesterday evening I was having computer problems so I decided to do a clean reinstall of WIndows 7. I cleaned out some partitions and then tried to put WIndows 7 on the fresh partition. The process began and then I got a mesage saying that Windows cold not format a partition on disk 0. This error occured while preparing the partition selected for installtin. Error code 0x80070057I also get a message when I restart the computer saying ¨Missing Operaing system¨ I´m guessing that that means I cant log in to fix this problem

View 3 Replies View Related

Windows Could Not Format A Partition Error 0x80070057

Nov 5, 2011

I had to install windows 7 in my pc.....bt while installing a message always shows up saying "windows could not format a partition on disk 0.an error occured while preparing the partition for installation.error code 0x80070057"my hard drive is samsung HD502H(500GB) and have a partition of 93.1GB.

View 1 Replies View Related

Fail To Format Disk 0 Partition 2 After Trying To Boot From Cd Drive

Apr 29, 2012

basically a bad partition will not allow me to wipe the computer clean, boot XP from the drive or add/change bios screen...i don't have tje kind of cash to buy or pay for repairs. what can i do?

View 1 Replies View Related

Non-repeatable BSOD With Two Different HDDs, Multiple Codes?

Jan 20, 2012

My computer just likes to crash. I haven't run into any way to repeat any of these, and there's no common factors. This has been happening for months, and I've been able to stand it until now. I'm just sick of never having a working computer. Hundreds of blue screens, at least 6 different error codes over the last 6 months. I've attached the latest few.The last problem I had with this computer was a rash of BSODs every few minutes, rendering my computer completely inoperable. It was bad caps on an old motherboard, which forced me to upgrade my mobo, CPU and RAM; that was done Sep 23 last year. I've still been getting a few lately, so I tried switching to an older hard drive I have on hand, which helped some, but didn't solve the problem completely. Here's the specs as of now.

Win 7 64 bit
Brand new case with two big fans to hopefully rule out overheating
Gigabyte GA-880GA-UD3H
AMD 955 Sector 5 DDR3 8GB
Rebranded MSI Nvidia 9500 GT
Secondhand PSU, 480W or 550W, don't remember which (suspected cause)
Drives:
Western Digital 40gig IDE (current boot drive )
Secondhand Seagate Barracuda Green 2TB SATA (problem child)
Generic IDE DVD R/RW

Yes, I know, it's weird mixup of parts that could run a lot better with newer hardware. That's what happens when you take what you can get and spend money only when you have to. I don't have money to throw at this stupid thing, money is in short supply. So don't just say, "buy a brand new this, that and the other and your troubles will be over," unless that is the ONLY option to fix this. I simply can't afford it.

EDIT TO ADD:A short list of codes and associated files I've gotten in the last couple BSODs, just for quick review and in no specific order:

50, ntfs.sys
3B, ntfs.sys
D1, ndis.sys
3B, tcpip.sys

Because of the ntfs.sys being a common factor, I suspect the hard drives, but I'm also wondering if it's not something else,because this happens with two different drives, one IDE, the other SATA.Also, the errors below are from both drives, both with Win 7 installed. The perfmon was run on the IDE drive, as the SATA drive is too unstable to run reliably for 30 minutes.

View 9 Replies View Related

Multiple Drives Cause 'no Active Partition Found' Error

Sep 18, 2012

I have had my system up and running with Windows 7 for at least four or five months. I have four drives in an mATX case. Yesterday, while it was idle, I saw it flash a BSOD and then rebooted. when it restated it displayed the following Error: "No active partition found. Reboot your computer." Which I did several times to no avail. Next, I used the install disk to try to "repair" the partition...seven or ten times, no luck. Also, no drives were listed in the window at repair prompt. So, I pulled all the cables on all the drives but the one containing the system and voilas! here I am writing to you without issue and without three of my drives. I have two other sata drives in addition to my system sata drive. one IDE drive on the system.

View 3 Replies View Related

"Windows Cannot Format System Partition On This Disk"

Jan 20, 2011

Awhile ago I got myself two SSD drives and installed Windows 7 on one of them. I didn't move over my OS from my old 1TB drive or anything I just did a clean install. Today I finally finished making sure I'd transfered over all my files from the disk and I was about to format it when I got the message that can be seen in the above picture. It seems the old Windows (D: drive) is still set as the System drive and my new Windows OS (SSD C: drive) is just set as Boot but not System.

This makes me unable to format it and I have no clue on how to fix this. Does anyone know how I can give my new SSD drive the System status so I can format the old drive?

View 8 Replies View Related

Error 0x80070057 During Clean Install - Cannot Format Partition

Oct 16, 2011

I have leptop first I want to recovery but I press format hard drive partition to result in full unlocation not left a single partition 465gb partition unlocation there are leptopku 500GB hard drive and I try to enter recovery dvd lg dvd but do not want the road containing the message dvd / cd rom # 1 not complete, and I also had to replace the windows wishful dream but apparently there is an error code: 0x80070057

View 3 Replies View Related

Memory Stick Error - Need To Format Disk Before Using

Jun 20, 2011

How to solve memory stick error, it You need to format the disk in drive F: before you can use it.

View 1 Replies View Related

Cannot Format USB Disk Drive Because Of I/O Device Error?

Feb 16, 2012

my flash LG 2GB flash has refused to be formatted with response access denied

View 2 Replies View Related

Hard Disk Giving Error After System Format

Dec 26, 2011

i am using windows 7 os. Actulay i format the system. after formating system whn i login , i am getting msg "windows detected hard disk problem and you may loss datas from ur drive c,d & e" bt my system condition is good.wt should i do for this?hw can i clear this error? pls help me

View 1 Replies View Related

Format A Hard Drive With Windows 7 Using A 2000 Format Disk?

Aug 29, 2012

Can I format a Hard Drive with Windows 7 using a 2000 format disk. If so, what are the prompts i see and action on boot-up before I use the format C. Done it before but just forgot

View 4 Replies View Related

Deleted Linux Partition Using Windows 7 Disk Manager - GRUB Loading Error 22

Jun 6, 2012

I have a Dell XPS 430 that came with Windows Vista and a Windows 7 upgrade disk. I set up my main hard drive with Windows 7 on one partition, Linux on another partition, and a third partition for storage. I recently needed more space for Windows, and no longer needed Linux, so using the Windows 7 disk manager I deleted the Linux partition and extended the Win partition using the newly unallocated space.

Upon restarting my machine, I am no longer able to boot into windows but instead am presented with the message:
GRUB Loading, please wait...
Error 22

I have a Windows 7 disk that I am using to access the repair utility, which I have run countless times. I have tried severel of the tutorials to rebuild BCD and FixMBR, etc etc. Frankly I am getting lost in all the commands and not even sure what does what anymore!

View 1 Replies View Related

Error In Partition Of Hard Disk

Apr 30, 2011

i am installed using Windows 7 ultimate 32bit now. i tried to partition the extended hard disk in my new pc but it shows the error as " no available memory to partition on your computer" so what i do, still there is 215GB of free space with good health.

View 3 Replies View Related

Bootmgr Error After Trying To Delete Partition Off OS Disk?

Mar 11, 2012

I have an OCZ Agility 3 as well as a Crucial M4 SSD I thought Id setup everything right but then noticed that the drive only had 100 mb available while following some steps from Seans SSD Optimization guide (I finished Step 3, didn't go to Step 4). I went into disk management, saw that the Agility drive was unallocated and that the drive I was seeing iComputer was actually just a 100 mb partition of the Crucial M4.I then created a new simple volume for the Agility, unassigned the partition drive letter, then tried to delete the partition, though the system didt allow me to (I had confused enabling the Agility drive with simply creating a partition so I thought I should get rid of the partition).After restarting, Im getting the bootmgr missing error, which leads me to the conclusion that I definitely messed something up.

* Ive tried using my original install disc to do a recovery install but then I get the error that:his version of System Recovery Options is not compatible with the version of Windows you are trying to repair. Try using a recovery disc that is compatible with this version of Windows* Ive also skipped to the command prompt and tried to run the bootrec commands to no avail. The bootrec /scanos command recognizes that Windows is installed on the Crucial M4 but I can't rebuild anything off of it.* I also tried to Custom Install on my drives and am told that I cannot install Windows on either Partition 1 or 2 of my Crucial or the Agility 3. I still see the 100 mb partition there marked as "Primary" while the bigger partition with the actual OS files is marked "System. The error message reads:Windows cannot be installed to this disk. The selected disk has an MBR partition table.On EFI systems, Windows can only be installed to GPT disksI'm not sure what else I can do at this point. I just tried unplugging the drives and observed the following:* If both drives are plugged in, then I am unable to do a custom install of Windows onto any of the M4 partitions or the Agility* If the M4 is plugged in (but the Agility is not), then I also cannot install onto either partition* If only the Agility is plugged, then I **can** install Windows and go into the repair install windows but there is no OS, obviously.

View 2 Replies View Related

Windows Updates Fail - Error Codes 80070643 And 8024200D

Nov 15, 2011

I have had problems with failed Windows Updates for the past 3 months or so. I tried the windows update troubleshooter and it did not work. I tried to perform a clean boot and install the updates, it also did not work. I was able to successfully install a few updates to the .NET Framework by completely uninstalling it and then re-installing it (and double checking that it installed properly). At the moment I have 17 updates that fail to install and they pretty much all deal with microsoft office 2010. The only two not related to microsoft office are:

Update for Windows 7 (KB2545698)
Update for Windows 7 (KB2547666)

I don't know what else to do. I currently have Windows 7 Professional x64. I bought the computer in March of this year and have not made any major changes. The only updates I have are from Windows Updates and the last time they successfully installed (besides the .NET Framework I just fixed) was 21/10/11 and it was a hotfix for windows (KB2482122) problems really started around 19/07/2011 (more than a few updates failed).

View 4 Replies View Related

Certificate And 400 & 404 Error Codes?

Oct 19, 2012

For the past few weeks, I'm getting all these error codes and have NO clue why? They are to sites I use every day. One moment I can access the sights and next moment I get the error codes.I've run the Windows Repair Disk, CClean, Malwarebytes and Spybot and nothing I've done has helped. Any ideas will be appreciated because I've gotten a rotten headache again today trying to figure this out.If I recall, I think it all started when the Babylon Toolbar forced it's way onto my computer. I have no idea how I got it but I believe it's been deleted....and not even sure if that is the start of the problems/ I just remember having to delete it and then got these others problems afterwards. Whether there is a connection or not, I don't know.

View 14 Replies View Related

"cannot Format Partition 0 - Error 0x80070057"

Nov 9, 2012

I have a Samsung Ultrabook with a 128GB SDD. I put my Win 7 64 bit on a thumb drive, and ran the installer. I deleted the existing partitions (including the OEM hidden for recovery). I ended up with on 119GB unallocated drive, and clicked next. It progressed to the "copying 0%" window, followed by a "cannot format partition 0 - error 0x80070057".After searching for a few hours and landing here, I tried the clean all routine. When I get to the clean all command, I get "DiskPart has encountered an error: The request could not be performed because of an I/O device error".I gave up, booted to Acronis, and restored the original drive image - which worked. But, the fact remains, I cannot get a "clean" retail copy of Windows 7 on this system.

View 2 Replies View Related

BSOD With Different Error Codes Each Time

Apr 27, 2011

Started getting blue screens for about a month(maybe, i cant remember cause its been so long!) now and i'm going insane because i've spent a LOT of time and effort attempting to fix the bsod's only to failim going to try and include everything i can and not miss anything important and end up looking like a noob.

View 5 Replies View Related

Stylish Error When Installing Codes

Nov 19, 2009

im trying to use stylish to change firefox into glass theme and to change google to dark theme , when i click install with stylish i get a message saying "sorry an error occurred loading the code".

is there anything i need to configure in firefox to run this

View 9 Replies View Related

Bsod Keeps Restarting With Error Codes

Mar 19, 2012

ok my computer crashes and works then crashes and works. i did system restore 2 times and my issue is not resolved. plz help me. i get the equal_or_not_less error blue screen error. ive uploaded the zip file eith my dump files from the bsod posting thread on here.

View 1 Replies View Related

Random BlueScreens, With Different Error Codes

Sep 12, 2012

Blue screens are coming at different times with different messages. I have not noticed a pattern, or certain thing happening at the time of crash.

Attaching file from the seven forums diagnostic tool.

View 5 Replies View Related

Frequent Bsdos On Number Of Different Error Codes

Dec 28, 2011

I've been suffering more or less frequent BSODs for a while. They usually come when I'm playing something, ranging from Orcs Must Die to Fallout 3. Most often they appear when I'm on Skype, chatting with people while playing Magicka or League of Legends. These BSODs are often accompanied with loud, "buzzing" sound which disappears only after the computer reboots itself. There have been many kinds of files which seem to be the cause behind the crash such as win32k.sys, dxgmms1.sys, nvlddmkm.sys, usbohci.sys and so on, but I don't know what to do about them.I've updated my GFX, chipset and soundboard (I think, it's integrated) drivers and flashed the BIOS. I've also reinstalled the OS once, few months ago I guess. I've checked RAM with memtest, turned out fine, same with hard drives. I haven't monitored computer temps very closely, but I have removed the side of the case so the air should be flowing freely. The crashes are also quite random.

View 7 Replies View Related

BSOD At Frequent Intervals - Various Error Codes

Feb 20, 2012

Got a new PC couple of weeks ago and have been having problems from day 1. I am getting increasingly regular blue screens. It's not just when trying to load software, or actually do anything. It can be sitting idling and suddenly it dies on me.

Spec
Windows 7 Home Premium 64bit
First OS installed (new build system)
System age 3 weeks
OS age 3 weeks

I've attached all the dump files I could find.

View 6 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved